Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      This guide is a work in progress and will be updated as I refine the installation.
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks (Laptop: Thinkpad T61 / Nvidia NVS 140m, Laptop: Dell Latitude E6410 / Nvidia G3100m, Desktop: Gigabyte G31 / GeForce 9600, Desktop: Biostar TH55HD / Sapphire Pulse RX580) are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec SMBIOS MacModel MacMini 8,1 Unsupported M.2 PCIe x1 2230 Intel Wi-Fi (currently disabled in BIOS).  I may replace this with Brcm, but am using only Ethernet (IntelMausi) for now.  
      Installation Steps: To be provided
      See attached EFI and /L/E kexts in EliteDesk.zip archive See installation methodology here See references here  
      What is not working
      Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card).  
      What is not tested
      USB c 3.1 port Microphone port  
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions
      (Solved and included in the attached EliteDesk.zip archive) Unable to upgrade from 10.15.4 to 10.15.5 when using IntelMausiEthernet.kext.  Solution is to switch to IntelMausi.kext (Rev 1.0.2 here). (Solved and included in the attached EliteDesk.zip archive) Some USB devices were not recognized. My SSDT-UIAC.aml was incomplete and did not specify all required USB port types (missing SSxx ports). The attached EliteDesk.zip archive includes this fix. (Reported this as a possible Clover issue - no solution yet) Clover boot loader may default to Recovery volume after a normal shutdown.  Work-around is to select your normal macOS volume.  This may only happen when Clover is configured to boot LastBootedVolume and may be "fixable" by explicitly setting a boot volume (haven't tested this). (Watching this - not sure it's a problem) At least one display blanks (sleeps) when plugging / unplugging USB device (observed in front USB 3.1 ports).  Display wakes immediately on keyboard and mouse activity, so this is a minor issue but may be indicative of another issue. (No solution yet - work-around is to use Firefox) Safari has problems loading insanelymac web pages after sleep / wake.  Work-around: use Firefox or reboot.  I have seen reports in forums where Safari issues are experienced after sleep / wake on a real Mac.  Not sure if the problems are related.  I suspect that it might be related to streaming video on InsanelyMac pages (since I haven't observed the issue on "static" pages).
      Also observed video problem in AppStore after sleep/wake.  Console: VideoDecodersUnavailable  (Solved and included in the attached EliteDesk.zip archive) Display does not fully wake after resuming from sleep (needs an extra mouse or keyboard stimulus to fully wake).  Solution is to change boot arg darkwake=0 to darkwake=2.  Other values of darkwake may work as well, but this is the first I tried and it worked. (Solved and included in the attached EliteDesk.zip archive) -disablegfxfirmware boot arg is not required with WEG.  I inadvertently left this boot arg after I encountered an endless gfx firmware update boot loop while working on my FB patching.  This boot arg is no longer necessary after completing FB patching with WEG. (Solved and included in the attached EliteDesk.zip archive): Sometimes, CMOS time is lost on shutdown or restart.  Solution is to enable Clover's Apple RTC fix in config.plist. (Solved and included in the attached EliteDesk.zip archive) headphone jack doesn't work.  Solution is to change HDEF layout-id to 28. (Solved and included in the attached EliteDesk.zip archive) System freezes on wake from sleep because of a kernel panic related to hda-gfx (my system does not have HDMI and my DP->DVI adapters do not drive monitor speakers).  Solution is to add No-hda-gfx property to HDEF as described here.  This property is recognized as a Lilu flag and prevents loading hda-gfx. (Solved and included in the attached EliteDesk.zip archive) Device (PMCR) is not defined.  Solution is a SSDT that "injects" the missing device. (Solved and included in the attached archive) eficheck is loaded (not sure why this is bad, but may be a privacy issue - see here). Solution is to add updated EFICheckDisabler kext that include Q370 chipset.  See here.  
      BIOS Version / Configuration: To be provided
      Version: 02.11.01 Rev.A  
      Clover Configuration: To be provided
       
      UHD 630 Framebuffer Patching: To be provided
       
      Current Versions
      Catalina 10.15.4.02 Clover (UEFI) r5118 Lilu.kext 1.4.4 WhateverGreen.kext 1.3.9 AppleALC.kext 1.4.9 IntelMausi 1.0.2 (Not IntelMausiEthernet)  
      Credits To be provided
       
       




      EliteDesk800 G4 Mini - Rev 0.7.zip



    • By ludufre
      Installing macOS Catalina 10.15.5 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      05/27/2020 20:02h GMT-0
      - Update instructions 10.15.5.
       
      03/24/2020 20:23h GMT-0
      - Update instructions 10.15.4.
       
      01/30/2020 23:54h GMT-0
      - Update instructions 10.15.3.
       
      12/11/2019 03:58h GMT-0
      - Update instructions 10.15.2.
      - Updated EFI folder attached.
       
      11/30/2019 18:03h GMT-0
      - Changed Device -> Graphics platform to fix dual HDMI monitor.
      - Updated EFI folder and config.plist
       
      11/29/2019 21:28h GMT-0
      - Added full EFI folder as requested.
       
      11/27/2019 02:33h GMT-0
      - Added BIOS profiles for ease.
       
      11/25/2019 22:45h GMT-0
      - Fixed wrong ethernet link (IntelMausi.kext).
      - Thanks to @MiMoHo
       
      11/24/2019 04:56h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Work.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Empty
       
      What you need to install
       
      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Catalina install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction  This will take about 30 minutes.
       


      Install bootloader
       
      Download the CloverEFI from official repository (used 5099) and install only with these options on "Install macOS Catalina":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended Drivers - FSInject (I still don't know if it's really necessary)
      - UEFI Drivers - File System drivers - ApfsDriverLoader (Support to APFS partitions)
      - UEFI Drivers - File System drivers - VBoxHfs (Support HFS/HFS+ partitions)
      - UEFI Drivers - Memory fix drivers - AptioMemoryFix (Fix the memory management of de UEFI/BIOS)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (If you are going to use NVMe)
       
      FileVault 2
       
      If you plan to use FileVault 2, you need to download additional drivers, since what comes with Clover is not up to date and use VirtualSMC instead of FakeSMC.
      Follow instructions bellow:
       
      From current Clover installation, check these options to USB keyboard/mouse work on password screen:
      - UEFI Drivers - Human Interface Devices - UsbKbDxe
      - UEFI Drivers - Human Interface Devices - UsbMouseDxe
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      Download the versions 2.1.0 and 2.0.9 of AppleSupportPkg from: https://github.com/acidanthera/AppleSupportPkg/releases
      We need the last version of AppleGenericInput.efi that is inside 2.1.0 and last version of AppleUiSupport.efi that is inside 2.0.9.
      OR download attached bellow.
       
      Put in /Volumes/EFI/EFI/CLOVER/drivers/UEFI/
       
      That's it! FileVault 2 will work without problems.
       

       
       
       
      Make things works
       
      After Clover install will be created a partition named EFI and mounted in Desktop. Usually the path is /Volumes/EFI/.
       
      - Replace the /Volumes/EFI/EFI/CLOVER/config.plist with mine attached below according to your processor version.
      - Put all SSDT-*.aml attached below in /Volumes/EFI/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.8.0.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Copy the Clover Configurator to flash drive because you will need later.
       
      Download those Kexts and put in /Volumes/EFI/EFI/CLOVER/kexts/Other/
       
      - Download the VirtualSMC.kext, SMCProcessor.kext, SMCSuperIO.kext and UEFI driver (put VirutalSmc.efi inside /Volumes/EFI/EFI/drivers/UEFI/). I used the version 1.0.9.
      - Download the Lilu.kext from here. I used the version 1.3.9.
      - Download the WhateverGreen.kext from here. I used the version 1.3.4.
      - Download the AppleALC.kext from here. I used the version 1.4.3.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the IntelMausi.kext from here. I used the version 1.0.2.
      - Download the SmallTree-Intel-211-AT-PCIe-GBE.kext attached bellow to enable second ethernet.
       
      Important! If you are coming from my previous Mojave guide, please note that I am using some kexts from other repositories / authors.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      Now you can start the installation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is F10 (I use an 8th generation processor, so I don't need to upgrade)
       
      You can configure manually or load my BIOS profile.
       
      Manually:
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: BIOS - CSM Support to Disabled
      - Change value: BIOS - Secure Boot to Disabled
      - Change value: Peripherals - Initial Display to IGP
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Save & Exit Setup
       
      or, BIOS profile
      You can use one of my BIOS profiles attached bellow.
      It's two versions. One stock (Geekbench 4: 5840/27384) and another with overclock [5.0 GHz] (Geekbench 4: 6360/30348)
      - Put the profile in the root of the flash drive at EFI partition.
      - Restart with DEL pressed to enter BIOS setup.
      - Go to Save & Exit.
      - Select Load Profiles.
      - Select last option and then the flasdrive in the list.
      - And finally choose MACOS_STOCK or MACOS_5GHZ.
      - Save & Exit Setup
       
      Then:
      - Now, hold the F12
      - In the list, select your flash drive.
      - Choose the flash drive (white icon).
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press ESC again and select the flash drive.
       
      Choose the internal disk (gray hdd icon) if not already selected.

      The second part of the installation will begin. This will take 16 minutes.

       
      Post installation
       
      Bootloader

      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to make the system disk bootable.

      Open the Clover Configurator from flash drive that you copied before.

      Mount and open the flash drive EFI partition. (Inside Clover Configurator, Mount EFI -> Select flash drive in Efi Partitions list -> Mount Partition -> Open Partition)
       
      Copy the EFI folder to desktop.
       
      Go back to Clover Configurator, unmount the EFI partition of the flash drive and mount and open the EFI partition of internal disk.
       
      Move the EFI folder from Desktop to EFI partition of the internal disk.
       
      Eject the flash drive.
       
      Move all Kexts from EFI partition of internal disk to /Library/Extensions and make kext cache, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.15/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
      Last thing
       
      Run this command in Terminal to disable hibernation (doesn't work in macOS):
      sudo pmset -a hibernatemode 0  
       
      It's done!
       
       
      System Updates
       
      10.15.2
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.0.
      - WhateverGreen.kext. I used version 1.3.5.
      - AppleALC.kext. I used version 1.4.4.
      (all download links above)
       
      Download the latest CLOVERX64.efi.zip build. I used version 5100.
      Mount EFI partition and unzip to:
      - /Volumes/EFI/EFI/CLOVER/CLOVERX64.efi
      - /Volumes/EFI/EFI/BOOT/BOOTX64.efi (rename the copy of CLOVERX64.efi to BOOTX64.efi
       
      Install update. Will reboot at least four time.
       
       
      10.15.3
       
      Updated with success without changing anything.
       
       
      10.15.4
       
      Before install, update the following kexts:
      - Lilu.kext. I used version 1.4.2.
      - WhateverGreen.kext. I used version 1.3.7.
      - AppleALC.kext. I used version 1.4.7.
      - VirtualSMC.kext. I used version 1.3.7.
      (all download links above)
       
      Download the latest CLOVER installer. I used version 5107.
      - Install respecting the configuration mentioned above in "Install bootloader" section.
       
      Install update. Will reboot at least four time.
       
       
      10.15.5
       
      - Same as usual, update all Kexts and Clover.
      - Install Update, reboot.
       
      If you like me, I had a problem with two monitors. I needed to roll back two Kexts of video from 10.15.4: FixGraphics10.15.5.zip
      After replace, fix permissions and cache.
       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
      Attachments
       
      config.plist v2.zip
      EFI v4.zip
      Filevault 2 additional drivers.zip
      SmallTree-Intel-211-AT-PCIe-GBE.kext.zip
      SSDTs.zip
      MACOS_5GHZ
      MACOS_STOCK
       
       
       
    • By fantomas
      macOS Catalina 10.15.5
       
      macOS Catalina 10.15.5 introduces battery health management in the Energy Saver settings for notebooks, a new option to disable automatic prominence in Group FaceTime calls, and controls to fine-tune the built-in calibration of your Pro Display XDR. The update also improves the stability, reliability, and security of your Mac. 
       
      Battery Health Management
      Battery health management to help maximize battery lifespan for Mac notebooks Energy Saver preference pane now displays battery condition and recommends if the battery needs to be serviced Option to disable battery health management For more information, please visit https://support.apple.com/kb/HT211094
       
      FaceTime Prominence Preference 
      New option to control automatic prominence on Group FaceTime calls, so video tiles do not change size when a participant speaks  
      Calibration Fine-Tuning for Pro Display XDR
      Controls to fine-tune the built-in calibration of your Pro Display XDR by adjusting the white point and luminance for a precise match to your own display-calibration target  
      This update also includes bug fixes and other improvements:
      Fixes an issue that may prevent Reminders from sending notifications for recurring reminders Addresses an issue that may prevent password entry on the login screen Fixes an issue where System Preferences would continue to show a notification badge even after installing an update Resolves an issue where the built-in camera may not be detected when trying to use it after using a video conferencing app Addresses an issue for Mac computers with the Apple T2 Security Chip where internal speakers may not appear as a sound output device in Sound preferences Fixes a stability issue with uploading and downloading media files from iCloud Photo Library while your Mac is asleep Resolves a stability issue when transferring large amounts of data to RAID volumes Fixes an issue where the Reduced Motion Accessibility preference did not reduce the speed of animations in a Group FaceTime call  
      Enterprise content:
      Improves performance on certain Mac models when enabling hardware acceleration in GPU-intensive apps such as those used for video conferencing Addresses an issue where Microsoft Exchange accounts were unable to sign in during account setup when using Conditional Access Apple Push Notification Service traffic now uses a web proxy when specified in a PAC file via the Proxies payload Resolves an issue that prevented some displays connected to MacBook Pro (16-inch, 2019) from waking from sleep when the Mac wakes Major new releases of macOS are no longer hidden when using the softwareupdate(8) command with the  --ignore flag This change also affects macOS Mojave and macOS High Sierra after installing Security Update 2020-003.
       
      macOS Catalina 10.15.5 (19F96)
       
      Update
      Combo
       
      View full article
       
    • By fantomas
      macOS Catalina 10.15.5
      macOS Catalina 10.15.5 introduces battery health management in the Energy Saver settings for notebooks, a new option to disable automatic prominence in Group FaceTime calls, and controls to fine-tune the built-in calibration of your Pro Display XDR. The update also improves the stability, reliability, and security of your Mac. 
      Battery Health Management
      Battery health management to help maximize battery lifespan for Mac notebooks Energy Saver preference pane now displays battery condition and recommends if the battery needs to be serviced Option to disable battery health management For more information, please visit https://support.apple.com/kb/HT211094
      FaceTime Prominence Preference 
      New option to control automatic prominence on Group FaceTime calls, so video tiles do not change size when a participant speaks Calibration Fine-Tuning for Pro Display XDR
      Controls to fine-tune the built-in calibration of your Pro Display XDR by adjusting the white point and luminance for a precise match to your own display-calibration target This update also includes bug fixes and other improvements:
      Fixes an issue that may prevent Reminders from sending notifications for recurring reminders Addresses an issue that may prevent password entry on the login screen Fixes an issue where System Preferences would continue to show a notification badge even after installing an update Resolves an issue where the built-in camera may not be detected when trying to use it after using a video conferencing app Addresses an issue for Mac computers with the Apple T2 Security Chip where internal speakers may not appear as a sound output device in Sound preferences Fixes a stability issue with uploading and downloading media files from iCloud Photo Library while your Mac is asleep Resolves a stability issue when transferring large amounts of data to RAID volumes Fixes an issue where the Reduced Motion Accessibility preference did not reduce the speed of animations in a Group FaceTime call Enterprise content:
      Improves performance on certain Mac models when enabling hardware acceleration in GPU-intensive apps such as those used for video conferencing Addresses an issue where Microsoft Exchange accounts were unable to sign in during account setup when using Conditional Access Apple Push Notification Service traffic now uses a web proxy when specified in a PAC file via the Proxies payload Resolves an issue that prevented some displays connected to MacBook Pro (16-inch, 2019) from waking from sleep when the Mac wakes Major new releases of macOS are no longer hidden when using the softwareupdate(8) command with the  --ignore flag This change also affects macOS Mojave and macOS High Sierra after installing Security Update 2020-003.
       
      macOS Catalina 10.15.5 (19F96)
       
      Update
      Combo
    • By miliuco
      Instalar macOS 10.15 Catalina en la placa Gigabyte P55-USB3 con tarjeta gráfica Radeon RX 580 utilizando un dispositivo USB con el programa de instalación creado con el comando createinstallmedia y con Clover como gestor de arranque. Las instrucciones para instalar macOS 10.14 Mojave en este ordenador son prácticamente las mismas, reemplazando la aplicación Catalina por Mojave, por lo que este artículo sirve para ambas versiones de macOS. La placa base Gigabyte P55-USB3 (y algunas otras de la misma marca con chipset P55 / H55) facilitaron el montaje de un hackintosh desde hace 10 años y la instalación de macOS desde la versión 10.6 Snow Leopard. Aunque se trata de una placa veterana, el comportamiento con Mojave o Catalina es muy bueno después de cambiar el disco duro clásico de platos giratorios (HDD) por uno de estado sólido (SSD).
       
      Componentes del hackintosh
       
      Placa base Gigabyte GA-P55-USB3: chipset P55, socket 1156, audio ALC892, red Gigabit RTL8111D, admite hasta 4 módulos de memoria RAM DDR3 Procesador Intel Core i5-750 para socket 1156: 4 núcleos, caché de 8MB, frecuencia de reloj 2,66 GHz Tarjeta inalámbrica + bluetooth fenvi FV-T919: PCI-Express, wifi es de tipo ac, reconocida por macOS como Airport y bluetooth de Apple Tarjeta gráfica Radeon RX 580 de 8GB: funciona bien tal como sale de la caja pero hay algunos detalles que merecen ser tenidos en cuenta, tiene su propio artículo.
        Requisitos previos
       
      La aplicación Instalar macOS Catalina en la carpeta /Aplicaciones Memoria USB de al menos 16gb preparada desde Utilidad de Discos con esquema de particiones MBR y formateada como Mac Os Plus con registro (en placas Gigabyte antiguas como la mía, las memorias USB particionadas con esquema GUID en vez de MBR suelen colgar el sistema al arrancar) Versión reciente de Clover (he utilizado la versión r5117) Versiones recientes de Lilu (al menos 1.4.4) y WhateverGreen (al menos 1.3.9) para afinar el comportamiento de la tarjeta gráfica Versión reciente de RealtekRTL8111.kext (he utilizado la versión 2.2.2) Versión 6.26-322 de FaceSMC (versiones más recientes inhabilitan el montaje automático de dispositivos USB en mi sistema).
        Crear USB de instalación
       
      Ejecutar este comando desde Terminal (suponiendo que el dispositivo de destino se llama USB):
      sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/USB /Applications/Install\ macOS\ Catalina.app Al terminar la operación hay que instalar Clover en la memoria USB, en mi caso elijo las opciones siguientes:
       
      Instalar Clover en la partición ESP Gestor de arranque > Instalar boot0af en el MBR CloverEFi > CloverEFI 64-bits SATA BIOS Drivers, 64 bit > Recommended drivers > FSInject + SMCHelper + XhciDxe BIOS Drivers, 64 bit > File System drivers > ApfsDriverLoader Instalar los scripts RC en el volumen seleccionado Scripts RC opcionales > Disable sleep proxy client.
        Hay que copiar 4 extensiones a la carpeta EFI/CLOVER/kexts/Other del dispositivo USB: FaceSMC 6.26-322, Lilu 1.4.4, WhateverGreen 1.3.9 y RealtekRTL8111 2.2.2. Respecto al archivo config.plist lo más significativo es:
       
      Boot > kext-dev-mode=1 en Boot arguments Gui > Theme embedded, EmbeddedThemeType Dark, Screen Resolution 1920x1080 (es la de mi monitor), Preboot en Hide Volume Graphics > en blanco, no se marca nada salvo si se utiliza la solución de foxbox para tener más de 2 conectores habilitados RT Variables > 0x28 en BooterConfig y 0x67 en CsrActiveConfig SMBios > iMac14,2 Sytem Parameters > Yes en Inject Kexts y marcar Inject System ID.
        Instalar macOS Catalina
       
      Arrancar desde el dispositivo USB y elegir Install macOS from Install macOS Catalina. Comienza el programa de instalación hasta que se reinicia el PC. Aquí se elige Install macOS from HDD (el nombre del volumen en el que estás instalando macOS). Con la tarjeta gráfica RX 580 se pierde la pantalla (en negro) en esta segunda fase de la instalación, es una fase en la que el usuario no interviene hasta que se vuelve a reiniciar el PC por lo que puedes dejarlo funcionar hasta que se muestre el menú de Clover del USB otra vez. Hay que elegir Boot macOS from HDD para arrancar el sistema instalado desde el disco duro, se recupera la pantalla y se puede configurar la cuenta y las opciones iniciales. A partir de este momento la pantalla funciona bien. En resumen:
       
      Arranque desde USB > menú Clover > Install macOS from Install macOS Catalina > pantalla funciona bien Arranque desde USB > menú Clover > Install macOS from MacintoshHD > pantalla en negro Arranque desde USB > menú Clover > Boot macOS from MacintoshHD > pantalla funciona bien.
        Instalar Clover y extensiones en el disco duro
       
      Hay que instalar Clover en el disco en el que acabamos de instalar macOS. Las opciones son las mismas que al instalarlo en la memoria USB. También hay que copiar las 4 extensiones (FaceSMC 6.26-322, Lilu 1.4.4, WhateverGreen 1.3.9 y RealtekRTL8111 2.2.2) a la carpeta EFI/CLOVER/kexts/Other de la partición EFI del disco. Y repasar el archivo config.plist recordando lo comentado para el USB. Si todo ha ido bien, al reiniciar sin dispositivo USB el ordenador arranca desde el disco duro con macOS Catalina en marcha.
       
      Nota: no comento nada del sonido porque utilizo un dispositivo externo de sonido por USB que funciona sin requerir configuraciones adicionales de ningún tipo. Esta placa base lleva el chip de sonido Realtek ALC892 que tengo desactivado, si deseas utilizarlo hay opciones para activarlo, si buscas ALC892 Catalina o ALC892 Mojave encontrarás soluciones para ello.
       

×