Jump to content
gusbemacbe

Antes de comprar, vale a pena instalar o Hackintosh num SSD m.2 2280 externo num PC com CPU AMD e GPU NVIDIA Geforce™?

1 post in this topic

Recommended Posts

Olá,

 

Eu sou um ex-usuário do último computador da Apple – Mac mini – que faleceu no ano passado.

 

Pensarei em dar meu computador portátil compatível com Hackintosh ao meu irmão que comprei anos atrás (em referência ao tópico «Sou novo ao fórum, já fui um usuário de Hackintosh e ainda pretendo montá-lo», porque ele quer jogar mais de um computador, pois ele é um streamer de Twitch e YouTube e um jogador hardcore, e não precisarei ficando emprestando-lhe muitas vezes.

Se ele quiser, do meu antigo computador portátil, pegarei apenas um SSD Samsung Evo 860 de 240GB com o Arch Linux instalado e deixarei um HD de 500 GB para ele. No futuro, comprarei um novo laptop Alienware.

 

Como me formei no início deste ano, mudei-me para um novo supercomputador cujo processador é AMD Ryzen™ 7 2700X e cuja placa de vídeo NVIDIA GeForce ™ 1660 Ti. Há mais detalhes que posso fornecer-lhes na minha assinatura abaixo. Possuo um SSD m.2 2280 externo com o Windows 10 instalado.

 

Reconsiderarei a compra da quarta unidade – um externo SSD m.2 2280 SATA de 480GB 545MB/s da marca WD Green ou um externo normal SSD SATA de 1TB 545MB/s da marca WD Green – para instalar o Hackintosh. Mas antes de comprá-lo, preciso ter certeza.

 

1. Vale a pena instalar o Hackintosh num SSD m.2 2280 externo? Se eu criar duas partições, uma para o MyHack/Chameleon/Clover do InsanelyMac e outra para o Hackintosh, e a inicialização do meu supercomputador é nativamente BIOS e Grub, vale a pena? Talvez eu tente instalar o reFind no Arch Linux para substituir o Grub, se valer a pena.

2. Sei que macOS High Sierra, Mojave e Catalina funciona com o processador AMD Ryzen™, mas se eu precisar do Metal 2 para executar a versão mais recente do Sketch (a qual eu possuo uma licença original) e de outros aplicativos cujos possuo as licenças originais? O NVIDIA GeForce™ 1660 Ti é compatível com o Metal 2?

3. Como é um SSD externo, poderei executar o Hackintosh como um sistema operativo portátil noutros computadores?

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      This thread for installing Catalina on the Dell Latitude E6410 WITH NVIDIA GRAPHICS (BIOS A17, NVidia 3100m) will help you install a fresh installation of Catalina on your Dell Latitude E6410, it will help you upgrade from 10.15.2 to 10.15.3 (if you originally installed Catalina from this thread) and it will also help you upgrade from Mojave 10.14.6 if you have already installed Mojave by following the instructions here.  The instructions in this first post assume that you are installing Catalina in an APFS container.  If you are curious about the evolution of this solution and how sleep/wake was solved, review the Mojave installation thread.
       
      Important: This Thread is NOT intended to help you install macOS on a Latitude E6410 with Intel HD Graphics (without Nvidia graphics).  The DSDT attached to this first post (in E6410-Catalina.zip) is VERY SPECIFIC to the Nvidia graphics implementation and has not been edited for HD Graphics - there are elements required for HD Graphics that are missing from the attached DSDT and there are DSDT mods that have not been tested with HD Graphics.  Also, the kexts attached to this first post are specific to a Broadcom Wi-Fi card which must replace the original Intel Wi-Fi card.
       
      This first post will be modified to reflect lessons learned and to reflect the most current working state of my Latitude E6410 (with NVidia 3100m discrete graphics) running Catalina.  Issues, observations and performance tips are recorded toward the bottom of this first post.  My recommended CLOVER configuration is specified toward the bottom of this first post.
       
      *** If you want help with your installation, please post your issue along with problem reporting files generated using @black.dragon74's problem reporting tool.  Google 'GENERATE PROPER PROBLEM REPORTING FILES black.dragon74' to find it. ***.  If Catalina's Read-Only protections block your installation of black.dragon74's gen_debug script, please copy the attached gen_debug script to your Desktop, change script properties with the terminal command 'chmod a+x ~/Desktop/gen_debug' and run the script from your Desktop.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) Wi-Fi: Broadcom BCM 94352HMB (replaced original Wi-Fi card) BIOS (version A17) configured as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC:Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace:Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;   
      Versions of the software used in this installation are listed below the installation steps.  EFI and kexts for Catalina are attached to this first post in E6410-Catalina.zip.  CLOVER configuration is specified below the installation steps.
       
      Wi-Fi connection to an Access Point is delayed when using AppleALC for sound.  Do not use Apple ALC.  Use VoodooHDA pkg 2.9.2 v15 for sound.
       
      Steps to install Catalina on a Dell Latitude E6410 (BIOS A17, NVidia 3100m)
      Make sure that your system matches my system description above (including BIOS version, Wi-Fi card, BIOS settings) If performing an upgrade from Mojave or a previous version of Catalina, backup your Mojave or Catalina partition! (Carbon Copy or similar) Download Catalina Installer Download DosDude Catalina Patcher Use DosDude Patcher to create Catalina USB Installer Delete LegacyUSBInjector.kext (we're using @RehabMan's USBInjectAll.kext with custom SSDT) and delete SIPManager.kext (CLOVER is managing SIP) from Catalina USB Installer's /Library/Extensions folder Copy all but the FakeSMC sensor kexts in E6410-Catalina.zip (attached) LE folder to the Catalina USB Installer /Library/Extensions (copy all kexts (including FakeSMC.kext) but not the FakeSMC sensor kexts) Install CLOVER Bootloader (Legacy) on USB Installer using the EFI in the E6410-Catalina.zip (attached).  Use the CLOVER configuration specified below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Reset your Latitude E6410 NVRAM by doing the following (this may be important if you're making changes to your existing EFI and won't hurt anything if you're not making any changes) turn-off your laptop remove A/C power and main battery press and hold the power button for 30 seconds restore A/C power and battery Boot your Latitude E6410 from the Catalina USB Installer that you created in steps 5-8. Select "Reinstall macOS" (note that I have existing installations of Mojave and High Sierra on my Latitude E6410, so it's possible that this menu item changes to "Install macOS" if you don't have any previous macOS installations). Select your Catalina destination partition (which will be your Mojave or previous Catalina partition if you are upgrading) After the Catalina Installer reboots the first time, boot from the "macOS Installer" partition on the disk that you selected as your Catalina destination (not the macOS installer on the USB) After the Catalina Installer reboots the second time, boot the Catalina macOS Installer on the USB Select the Post Install Patcher utility Select only the following Post Install Patches (no other patches / options) Install Patch Updater Legacy Video After the Post Install Patcher reboots,  boot from the newly installed (or upgraded) Catalina partition and complete the macOS configuration Remove these kexts (if they exist) from /Library/Extensions: LegacyUSBInjector.kext, LegacyUSBVideoSupport.kext and SIPManager.kext If you are performing a fresh installation of Catalina (I may be changing kext installation to EFI/Clover/kexts/Other to address Brcm Bluetooth Issue.  See discussions in Known Issues below and later in this thread): Install CLOVER on your boot disk and configure EFI using files in the attached E6410-Catalina.zip.  Use the CLOVER configuration below.  Your EFI Clover/kexts/Other folder needs only FakeSMC.kext, IntelMausiEthernet.kext, USBInjectAll.kext and VoodooPS2.kext.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Install all kexts in the attached E6410-Catalina.zip LE folder to your /Library/Extensions folder.  NOTE: These instructions assume installation of Brcm kexts in /Library/Extensions.  Read the Brcm install instructions if you're installing kexts in EFI/Clover/kexts/Other, since your installation and at least one kext WILL BE DIFFERENT. Copy HWMonitor from the application folder in the attached E6410-Catalina.zip to your Applications folder. Install VoodooHDA (I installed using the Classic method) Skip to Step 21 If you are upgrading from a previous version of Catalina using the instructions from this thread or from Mojave that you installed using the instructions here (I may be changing kext installation to EFI/Clover/kexts/Other to address Brcm Bluetooth Issue.  See discussions in Known Issues below and later in this thread): Update Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /Library/Extensions) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. NOTE: These instructions assume installation of Brcm kexts in /Library/Extensions.  Read the Brcm install instructions if you're installing kexts in EFI/Clover/kexts/Other, since your installation and at least one kext WILL BE DIFFERENT. Update IntelMausiEthernet.kext Remove VoodooSDHC.kext from /Library/Extensions Re-install VoodooHDA if necessary (I installed using the Classic method) Ensure PROPER kext installation: If you're manually installing kexts in /Library/Extensions, make sure that you execute the following (in terminal) cd /Library/Extensions sudo chown -R root:wheel *.kext sudo chmod -R 755 *.kext sudo kextcache -i / After you execute 'sudo kextcache -i /' you should observe that ALL kexts are allowed.  If not, your kext directory attributes are probably incorrect.  Repeat kext installation and try again. Reboot from your new/upgraded Catalina partition Welcome to macOS Catalina! Change the keyboard type to ISO (System Preferences > Keyboard > Change Keyboard Type) Swap the Command and Option keys (System Preferences > Keyboard > Modifier Keys) Set hibernatemode: In terminal, execute sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo touch /var/vm/sleepimage sudo chflags schg /var/vm/sleepimage  
      Version Info at the time of this writing:
      Catalina Installer 10.15.3 CLOVER v2.5k r5103 DosDude Catalina Patcher: v1.3.0 Lilu.kext 1.4.2 AirportBrcmFixup.kext 2.0.6 BrcmFirmwareRepo.kext 2.5.1 BrcmBluetoothInjector.kext 2.5.1 BrcmPatchRAM3.kext 2.5.1 IntelMausiEthernet.kext 2.5.0
      VoodooHDA.kext 2.9.2 v15 (NOT AppleALC)
       
      What is not working (that was working in Mojave)
      SD Card Slot (had to remove VoodooSDHC.kext which caused system freeze on wake)  
      Known Issues and Their Solutions
      (Solved - no further work required) USB sleep/wake power IORegistry keys are not injected (not included in Mojave's or Catalina's IOUSBHostFamily.kext).  Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched.  The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. (No solution yet) Brightness slider does not work in System Preferences > Displays.  Brightness is easily controlled with Dell brightness keys.  There is some work on this later in this thread, but I will not be solving this as I'm content with the Dell brightness keys (and Ambient Light Sensor works to auto-adjust brightness). I continue to refine the DSDT and CLOVER config.plist to optimize my Latitude E6410 for multi-booting between various macOS versions (High Sierra, Mojave and Catalina at the time of this writing). If you upgrade your Latitude E6410 EFI using my attached EFI, you may find that your Latitude E6410 is stuck in a boot-loop that ends in a white screen and reboots.  Clear your system by doing the following: turn off your laptop, remove A/C power, remove the main battery, press and hold the power button for 30 seconds, restore A/C power and battery, boot normally.  I have only found this to be necessary (very rarely) after making an EFI change, but you may find it helpful if making kext changes in /Library/Extensions as well. (Possible solution: move Brcm kexts to E/C/k/O with Clover "Inject Kexts" = YES.  Not yet implemented in the attached E6410-Catalina.zip file, so I'm leaving this work-around). (Work-around - no permanent solution yet) Cannot turn on Bluetooth after shutting-down with Bluetooth off.  Work-around is to leave Bluetooth on.  I don't use Bluetooth and don't mind, so this will likely be solved by someone else.  If you experience this issue and can't turn-on Bluetooth, I have found that putting the laptop to sleep (Fn-F1) and then waking the laptop restores proper operation of Bluetooth.  I have posted a problem description, logs and problem reporting files in this thread for help with this problem. (Solved - no further work required) Laptop does not sleep when closing lid.  Solution appears to be a combination of adding Notify (LID0) code to Method (BTNV), adding Device (PNLF) and adding the definition for pwm-info in the DSDT.  No surprise that the Latitude E6410 has yet another incomplete ACPI implementation.  I am using the same EFI for High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.3 and it works in all three macOSes. (No solution yet) No SD Card Slot (had to remove VoodooSDHC.kext) - I read somewhere that there is a solution that does not require any kexts (just a DSDT edit).  Haven't yet implemented this fix. (Not a problem that needs to be solved - leaving for historical purposes.  I am running Catalina without this.) - IOHWControl does not load under GFX0 (as observed in IORegistryExplorer).  Solution (if it needs to be solved) is to install AppleHWSensor.kext from a DosDude-patched Mojave /S/L/E in Catalina's /L/E.  Copy and install your own or use the kext attached to this post. (Solved - no further work required) Wi-Fi connection is delayed until a minute or so after boot - Use VoodooHDA and NOT AppleALC (Solved - no further work required) External USB ports do not work after waking from sleep (S3) - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Boot and shut-down time of Catalina is slower than Mojave - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Wi-Fi is not immediately available at OS startup - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Laptop freezes on wake - Remove VoodooSDHC.kext from /Library/Extensions  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z (I haven't noticed this issue for a while since I completed DSDT edits for Mojave, but keeping this here for historical purposes)  
      CLOVER Installation: Use these configuration options
      Install Clover in the ESP Boot Sectors Install boot0af in MBR Clover for BIOS (legacy) booting Clover EFI 64-bits SATA BIOS Drivers, 64-bit Recommended drivers FSInject File System drivers ApfsDriverLoader Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane After clicking "Continue", if prompted with "This Clover package is incompatible with this version of macOS," install anyway  
      After CLOVER installation is complete Copy the following from the attached E6410-Catalina.zip ACPI patched contents config.plist (change XX-MASKED-XX values to your own) kexts/Other (remove all other kext folders) Remove christmas and new year folders from themes (if present)  
      Credits
      Thanks to those who contributed to my Mojave solution and to the DosDude team (for the incredible macOS patchers), I think this Catalina installation was the easiest macOS installation that I have experienced (so far).  Many thanks to @Slice and his team for the incredible work on CLOVER and for continuing to support old legacy systems like this.  Also, thanks to @Mieze and @headkaze and others I'm sure for maintaining the Brcm kexts.  And finally, I still prefer to manually apply patches to the DSDTs in my systems.  CLOVER offers extensive patching functionality, but I'm old-school and like to have an error-free, fully-patched DSDT with a simple CLOVER config.plist.  I think that this manual DSDT patching approach (which required an extensive review and debugging of the original unpatched DSDT in this thread) is the reason that this Latitude E6410 is such a perfect MacBookPro6,2.  Thank you @RehabMan for being a great teacher and for always insisting on problem reporting files .
       
       

      AppleHWSensor.kext.zip

      gen_debug
      E6410-Catalina-3v6.zip
    • By D3s0lat0r
      Greetings to the Forum,
      i recently followed a guide on hackintosh,and also i am complete noob in this field.
      all is working great, as i am using macpeets codec with layout id=18 cause i like to manually switch to my headphones.
      only one thing doesnt work and its my mic. I tried all the layout ids but no luck.
      i am using ASROCK Fatal1ty b450 k4 with amd r5 2600.
      wich has alc 892.
      Can you please help me? Thank you very much
    • By tonyx86
      *** I have started another thread for installing Catalina on the Dell Latitude E6410.  If you were thinking of installing Mojave, but would prefer to skip right to Catalina, click here. ***
       
      I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6.  Everything works perfectly (including sleep).  I'm starting this thread hoping to help others install Mojave on their E6410s.  A brief installation guide is provided later in this first post.  The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      SLEEP IS WORKING! Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files.  The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
      USB sleep/wake power IORegistry keys are no longer provided in IOUSBHostFamily.kext after High Sierra 10.13.6.  Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched.  The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. Laptop does not sleep on lid close.  Solution is to add Notify (LID0) code to Method (BTNV) in the DSDT.  This is solved in the attached DSDT. Leaving this for historical purposes, but the CLOVER USBFix is no longer necessary after finding that I had incorrectly applied the DSDT _DSM patch for Device (EHC1).  The CLOVER USBFix is not needed after fixing the DSDT..  AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  Thank you, @feartech, for this tip. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc).  The attached config hard-codes ACOS and OSYS values equivalent to those for Linux.  Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  This should be an internal USB port (portType=2).  I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to SLPB Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. The Clover boot arg should be changed to "darkwake=0" for reasons explained by @holyfield in this thread.  Leaving this for historical purposes: LCD screen is blank when waking laptop by opening lid (screen is not blank when waking with power button).  Solution is to add darkwake=8 to CLOVER boot args.  Thank you @Hervé for this tip.  
      Brief Installation Guide:
      Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;  Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.  
      Credits
      In addition to those mentioned in this first post and in subsequent posts in this thread, much of this solution for the Latitude E6410 was made possible by the numerous contributions of @RehabMan.  I hope he's doing well, wherever he is.  Hopefully he has long since forgotten what a PIA I was (and still am) as I was (and still am) learning hackOS.  
       


      E6410-Mojave-v4.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
    • By BlitzPanzer
      Catalina 10.15.3, OC 0.5.5

      Follow the OpenCore AMD Vanilla Guide, everything works fine iMessage, Siri, FaceTime, Continuity, Airdrop, Audio, WiFi
      But here is the problem
      Once I restart or shutdown and reboot, I will have kernel panic, so i have to reboot once again, then no more kernel panic, straight back to the system.
      Down below are the 3 kernel panic reports I got after I am back to the system, also provided specs, kexts, drivers and config.plist I used.
      Please someone help me with the problem
      Thanks in advanced   

      System Specs
      CPU: Ryzen R5 3600
      MOBO: MSI B450 Mortar Max
      RAM: Kingston HyperX Fury 16GB*2 3200MHz DDR4
      SSD: Kingston A2000 500GB NVMe PCIe
      GPU: Gigabyte RX 570 Gaming 4G v2.0
      PCIe: BCM943602CS Kexts:
      AppleALC
      AppleMCEReporterDisabler
      BrcmBluetoothInjector
      BrcmPatchRAM3
      HDMIAudio
      Lilu
      MacProMemoryNotificationDisabler
      NightShiftUnlocker
      NVMeFix
      RealtekRTL8111
      VirtualSMC
      WhateverGreen Drivers:
      ApfsDriverLoader
      AppleUsbKbDxe
      FwRuntimeServices
      VBoxHfs config.plist:
      https://drive.google.com/file/d/1M22Tvn7W-Zf_b_-J52oLcfjECj5qAcp6/view

      Kernel Panic Report 1
      panic(cpu 0 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9f212fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffffa3ce87c000, CR3: 0x00000000263ba000, CR4: 0x00000000003406e0 RAX: 0xffffffa3ce87c000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffffa3ce75bb60, RBP: 0xffffffa3ce75bb80, RSI: 0xffffff806d3141c0, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805cc7c900, R13: 0xffffff835806f000, R14: 0x0000000000000000, R15: 0xffffff8068d2da50 RFL: 0x0000000000010246, RIP: 0xffffff7f9f212fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffffa3ce87c000, Error code: 0x0000000000000002, Fault CPU: 0x0, PL: 0, VF: 1 Backtrace (CPU 0), Frame : Return Address 0xffffffa3ce75b5c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffffa3ce75b610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffffa3ce75b650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffffa3ce75b6a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75b6c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffffa3ce75b7c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffffa3ce75b810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffffa3ce75b880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffffa3ce75ba00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffffa3ce75ba50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75ba70 : 0xffffff7f9f212fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffffa3ce75bb80 : 0xffffff7f9f24a795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffffa3ce75bba0 : 0xffffff7f9f212ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffffa3ce75bbe0 : 0xffffff7f9f2325c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffffa3ce75bc30 : 0xffffff7f9f1b8adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffffa3ce75bc70 : 0xffffff7f9f1b64be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffffa3ce75bd00 : 0xffffff7f9f128534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffffa3ce75bd80 : 0xffffff7f9f1b488e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffffa3ce75bde0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffffa3ce75be40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffffa3ce75bef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffffa3ce75bf50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffffa3ce75bfa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000->0xffffff7f9f1b2fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c185000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c228000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9f1b3000->0xffffff7f9f6f7fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 47565362999  
      Kernel Panic Report 2
      panic(cpu 10 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9e629fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d25d2000, CR3: 0x0000000029068000, CR4: 0x00000000003406e0 RAX: 0xffffff83d25d2000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d14c3b60, RBP: 0xffffff83d14c3b80, RSI: 0xffffff805f6adb80, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805fba2580, R13: 0xffffff835b02e000, R14: 0x0000000000000000, R15: 0xffffff80631191e0 RFL: 0x0000000000010246, RIP: 0xffffff7f9e629fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffff83d25d2000, Error code: 0x0000000000000002, Fault CPU: 0xa, PL: 0, VF: 1 Backtrace (CPU 10), Frame : Return Address 0xffffff83d14c35c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d14c3610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d14c3650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d14c36a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c36c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d14c37c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d14c3810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffff83d14c3880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d14c3a00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d14c3a50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c3a70 : 0xffffff7f9e629fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d14c3b80 : 0xffffff7f9e661795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d14c3ba0 : 0xffffff7f9e629ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d14c3be0 : 0xffffff7f9e6495c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d14c3c30 : 0xffffff7f9e5cfadb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d14c3c70 : 0xffffff7f9e5cd4be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d14c3d00 : 0xffffff7f9e52a534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d14c3d80 : 0xffffff7f9e5cb88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d14c3de0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d14c3e40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d14c3ef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d14c3f50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d14c3fa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000->0xffffff7f9e5b5fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c3f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c09f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9e5ca000->0xffffff7f9eb0efff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 38416992755  
      Kernel Panic Report 3
      panic(cpu 8 caller 0xffffff801da652fa): Kernel trap at 0xffffff7fa084dfe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d44cd000, CR3: 0x000000002b260000, CR4: 0x00000000003406e0 RAX: 0xffffff83d44cd000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d319bb60, RBP: 0xffffff83d319bb80, RSI: 0xffffff8066659c00, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff8061f35280, R13: 0xffffff835d231000, R14: 0x0000000000000000, R15: 0xffffff806189db90 RFL: 0x0000000000010246, RIP: 0xffffff7fa084dfe3, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff83d44cd000, Error code: 0x0000000000000002, Fault CPU: 0x8, PL: 0, VF: 1 Backtrace (CPU 8), Frame : Return Address 0xffffff83d319b5c0 : 0xffffff801d93bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d319b610 : 0xffffff801da734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d319b650 : 0xffffff801da64f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d319b6a0 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319b6c0 : 0xffffff801d93b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d319b7c0 : 0xffffff801d93b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d319b810 : 0xffffff801e0d2aa9 mach_kernel : _panic + 0x61 0xffffff83d319b880 : 0xffffff801da652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d319ba00 : 0xffffff801da64ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d319ba50 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319ba70 : 0xffffff7fa084dfe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d319bb80 : 0xffffff7fa0885795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d319bba0 : 0xffffff7fa084def0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d319bbe0 : 0xffffff7fa086d5c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d319bc30 : 0xffffff7fa07f3adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d319bc70 : 0xffffff7fa07f14be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d319bd00 : 0xffffff7fa074e534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d319bd80 : 0xffffff7fa07ef88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d319bde0 : 0xffffff801e01b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d319be40 : 0xffffff801e01adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d319bef0 : 0xffffff801e01a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d319bf50 : 0xffffff801e01c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d319bfa0 : 0xffffff801d8e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000->0xffffff7fa07d9fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9e5f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9e29f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7fa07ee000->0xffffff7fa0d32fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001d600000 Kernel text base: 0xffffff801d800000 __HIB text base: 0xffffff801d700000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 27776834167  
      config.plist
×