Jump to content
sirhot82

Mojave: Intel UHD 630 7 MB (No Acceleration) - Please Help :(

37 posts in this topic

Recommended Posts

13 hours ago, ctich said:

replace all.

 

CLOVER.zip

Good Morning, Thanks for this but the graphics card still boots up at 7MB. Someone from another forum as given me there files. Which the Intel HD graphics 630 card in the laptop works. 

 

So the problem now is when you boot up the apple logo boots half way and then goes to a black screen and continues to out put the graphics by the HDMI port as seen in the pictures and the laptop screen stays black. I have attached the new Debug files and a config file. I think the intel HD graphics 630 card should only push graphics to the laptop screen not the HDMI. If someone could help me with this I would be most greatful

debug_24164.zip

IMG_1279.jpg

IMG_1280.jpg

IMG_1283.jpg

config.plist

Share this post


Link to post
Share on other sites
Advertisement

In your config.plist Device -> Properties your  1st Framebuffer port is set to HDMI  

 

framebuffer-con1-type  00 08 00 00  so u could go ahead and try changing that to LVDS   framebuffer-con1-type  02 00 00 00

 

 

Share this post


Link to post
Share on other sites
1 hour ago, AkimoA said:

In your config.plist Device -> Properties your  1st Framebuffer port is set to HDMI  

 

framebuffer-con1-type  00 08 00 00  so u could go ahead and try changing that to LVDS   framebuffer-con1-type  02 00 00 00

 

 

Thanks I’ll give this a go later. fingers crossed 

Share this post


Link to post
Share on other sites
4 hours ago, AkimoA said:

In your config.plist Device -> Properties your  1st Framebuffer port is set to HDMI  

 

framebuffer-con1-type  00 08 00 00  so u could go ahead and try changing that to LVDS   framebuffer-con1-type  02 00 00 00

 

 

How do I edit the framebuffer con 1? Do I use the software in the picture?

3EF7D86F-67C3-4B8E-866E-74CB91D23254.jpeg

Share this post


Link to post
Share on other sites
46 minutes ago, AkimoA said:

did u really read what i wrote  ?  

 

anyway try this 

config.plist

Yes Sorry, I open Plist and could not work out how to see or change the values. I’m using TextEdit. Thanks for doing this for me. I have tried the plist and it still boots up to a black screen on the laptop but no image now on the output from the HDMI. I just got white noise now.

Edited by tomprescott_128

Share this post


Link to post
Share on other sites

Thanks everyone on here who help me on my issue with the booting into a black screen using intel hd graphics 630. Morselina off olarila forums has solved this issue. 


Use boot arguments lilucpu=8 and then go to Devices, properties and  change device-id = 19160000 and AAPL platform to 00001B19

This spoofs the Graphics card to an intel hd graphics 530. I also want to say Thanks to uzair12321 of tonyMacx86 forums who also help me on this issue.

Share this post


Link to post
Share on other sites
Am 3.12.2019 um 22:11 Uhr sagte iCanaro:

nicht L / E.

 

LILU & WEG -> EFI : thumbsup_anim:

 

Grafikkonfiguration einfügen -> Geräte -> Eigenschaften

Hallo, Brache hilfe mit der UHD Intel 630 zum laufen zubringen, i9 9900k. Gigabyte z390 Auros Pro Wifi, GTX 780 3 GB  Läuft  mit Appel Driver.

Danke im Voraus 

config.plist

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By midi-sama
      After a long time of cooking this computer up with a lot of stuff, I'm finally releasing my guide for this P50 with OpenCore.
       
      Lenovo ThinkPad P50 macOS Install with OpenCore
       
      This thread may be used for questions/corrections/additions. Good Luck.
    • By DOGER92
      Hi guys, I'm new to the world of Hackintosh. I write in this section because I have a problem with the graphics card of my laptop. As far as I understand from the web, it is not possible to use a dedicated graphics card on a laptop. So I'm trying to use the integrated processor one. The problem is that I have tried various procedures seen online, but in spite of this I cannot solve the problem. If you need this is the equipment of my laptop:

      Asus VivoBook Pro 15 N580VD-FI038T

      Screen: Led 15.6” 16:9 (Ultra HD 3480x2160).
      Chipset: Intel HM175.
      Cpu: Intel Core i7-7700HQ (2.80 GHz / 3.80 GHz, 4 core, 6 MB CACHE L3).
      Graphics Card: INTEL HD Graphics 630 + NVIDIA GeForce GTX 1050 4 GB GDDR5.
      Hard Disk: SSD M.2 512 GB SATA 3.0 + SSD 750GB.
      Ram: 32GB DDR4-2666.
      Audio: audio stereo Harman Kardon.
      Webcam: webcam HD with integrated headphone.
      Lan: Intel LAN 10/100/1000, Wi-Fi 802.11ac (2x2), Bluetooth 4.2.
      USB: 2 x USB 2.0, 1 x USB 3.0, 1 x USB 3.1 Type-C Gen 1, 1 x HDMI, 1 x LAN RJ-45, 1 x jack
      Slot: 1 x SD.

      I hope there is someone who can help me with this problem
    • By Georgiles
      Laptop: Asus Vivobook F510UA
      CPU: Intel Core i5-8250U
      Graphic: Intel UHD 620
      Wifi: Intel Dual Band Wireless-AC 8265 (no kexts for intel wifi) :(
      Card Reader: Realtek_CardReader(RTL8411B_RTS5226_RTS5227)
      Camera: ASUS UVC HD 7.Audio: Conexant Audio CX8050
      Touchpad: ELAN1300
       
       by parkrypto: thank you tctien342 for the amazing guide.
       
      https://github.com/tctien342/Asus-Vivobook-S510UA-High-Sierra-10.13-Hackintosh
       
      Ebayed the laptop for $290 + tax = $350
      added: 16gb RAM + existing 8GB = 24GB          Timetec Hynix IC 16GB DDR4 2400MHz PC4-19200 Non ECC Unbuffered 1.2V CL17 2Rx8 Dual Rank 260 Pin SODIMM Laptop Notebook Computer Memory Ram Module Upgrade S Series (16GB)     
      added: cheap wifi         TP-Link USB Wifi Adapter for PC N150 Wireless Network Adapter for Desktop - Nano Size Wifi Dongle Compatible with Windows 10/7/8/8.1/XP/Vista Mac OS 10.9-10.15 Linux Kernel 2.6.18-4.4.3 (TL-WN725N)     
      added: NAND 1TB Internal PC SSD https://www.amazon.com/gp/product/B073SB2MXT/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
      Gadget Reviews upgraded too, video: https://www.youtube.com/watch?v=39EquX5PTkQ
       
      I just installed. Everything works fine. I'll test final cut pro, premiere pro with 4k footage and get back with you on performance. 
      For now moves like a performant Mac book pro. 
      I installed Catalina first but I could not make the Intel UHD 620 Graphics get proper QE/CI. 
      Mojave is just fine. I want to use this system for quick video editing on the go.
      Geekbench in my signature.  
      If you need any files or have any questions pls ask.
       






      asus f510u mojave.zip
    • By Sagnik Ganguly
      Hello I'm Sagnik Ganguly, I'm trying to dual boot macOS 10.14 and Windows 10 (already installed) on a PC with Legacy BIOS. I've two hard drives one in where the windows is installed and another which is converted to GPT to install macOS Mojave 10.14 with a partion of Mac OS Extended (Journal) or APFS but when I went to the Install Disk Selection page, I'm selecting the partition but it says "This version of macOS 10.14 cannot be installed on this computer." can you help me please? 
      P. S. My motherboard doesn't support UEFI. 
      I'm attaching some pictures of the screens.


    • By tonyx86
      *** I have started another thread for installing Catalina on the Dell Latitude E6410.  If you were thinking of installing Mojave, but would prefer to skip right to Catalina, click here. ***
       
      I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6.  Everything works perfectly (including sleep).  I'm starting this thread hoping to help others install Mojave on their E6410s.  A brief installation guide is provided later in this first post.  The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      SLEEP IS WORKING! Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files.  The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
      USB sleep/wake power IORegistry keys are no longer provided in IOUSBHostFamily.kext after High Sierra 10.13.6.  Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched.  The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. Laptop does not sleep on lid close.  Solution is to add Notify (LID0) code to Method (BTNV) in the DSDT.  This is solved in the attached DSDT. Leaving this for historical purposes, but the CLOVER USBFix is no longer necessary after finding that I had incorrectly applied the DSDT _DSM patch for Device (EHC1).  The CLOVER USBFix is not needed after fixing the DSDT..  AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  Thank you, @feartech, for this tip. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc).  The attached config hard-codes ACOS and OSYS values equivalent to those for Linux.  Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  This should be an internal USB port (portType=2).  I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to SLPB Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. The Clover boot arg should be changed to "darkwake=0" for reasons explained by @holyfield in this thread.  Leaving this for historical purposes: LCD screen is blank when waking laptop by opening lid (screen is not blank when waking with power button).  Solution is to add darkwake=8 to CLOVER boot args.  Thank you @Hervé for this tip.  
      Brief Installation Guide:
      Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;  Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.  
      Credits
      In addition to those mentioned in this first post and in subsequent posts in this thread, much of this solution for the Latitude E6410 was made possible by the numerous contributions of @RehabMan.  I hope he's doing well, wherever he is.  Hopefully he has long since forgotten what a PIA I was (and still am) as I was (and still am) learning hackOS.  
       


      E6410-Mojave-v4.zip
×