Jump to content
AudioGod

AudioGod's Aorus Z390 Master Patched DSDT EFI for Catalina Mini Guide and Discussion

1,176 posts in this topic

Recommended Posts

Just now, l35l33 said:

also, previously when i use Realtek drivers in windows, i wasnt able to make the [sub/center] jack working. i connected 2 speakers in speaker jack and a sub in upper right line out jack but the sub is not outputing any sound. is yours working fine?


I only use stereo outs on my Realtek and have a external sound card for music creation.

in Catalina as far as I know you can’t use more then a stereo out as real macs don’t have surround sound or subwoofer outputs as far as I know. 
 

 

also why are you going into the bios to switch from windows to Cat?

do it from the Clover Boot selection. It works fine that way and there’s no need to change boot priority’s via the bios. Clover remembers your last choice of OS that you booted into.

Share this post


Link to post
Share on other sites
Advertisement
3 minutes ago, AudioGod said:

Just don’t restart from one os to the other that’s all.

if you want to restart windows to go back into windows then that’s fine but if you want to go from windows to Catalina just shutdown from windows and then once it’s off hit the power and boot in to macOS. It’s as simple as that really buddy. 
 

also why are you going into the bios to switch from windows to Cat?

do it from the Clover Boot selection. It works fine that way and there’s no need to change boot priority’s via the bios. Clover remembers your last choice of OS that you booted into.

i see... so from now on i should only need to turn off when done with one OS. i can select either in clover, so the boot priority in my bios should be set to mac's ssd.

thx a lot for the clue!!! 

Share this post


Link to post
Share on other sites
Just now, l35l33 said:

i see... so from now on i should only need to turn off when done with one OS. i can select either in clover, so the boot priority in my bios should be set to mac's ssd.

thx a lot for the clue!!! 

Yes Exactly, That’s correct.

Share this post


Link to post
Share on other sites
5 minutes ago, AudioGod said:


I only use stereo outs on my Realtek and have a external sound card for music creation.

in Catalina as far as I know you can’t use more then a stereo out as real macs don’t have surround sound or subwoofer outputs as far as I know. 
 

 

also why are you going into the bios to switch from windows to Cat?

do it from the Clover Boot selection. It works fine that way and there’s no need to change boot priority’s via the bios. Clover remembers your last choice of OS that you booted into.

no, i dont mean 2 jacks in mac, but in my aorus' realtek drivers, even in windows the sub/center jack is not working as my previous z97x gaming 7

it doesnt mean the jack is not working, the jack is working fine bcos when tested via speaker configuration the sub has audio, but when i play some music or games, windows wouldn't separate the bass to the sub

it's weird, i know

i dont know if anyone else experience this issue, though

Edited by l35l33

Share this post


Link to post
Share on other sites
2 minutes ago, l35l33 said:

no, i dont mean 2 jacks in mac, but in my aorus' realtek drivers, even in windows the sub/center jack is not working as my previous z97x gaming 7

it doesnt mean the jack is not working, the jack is working fine bcos when tested via speaker configuration the sub has audio, but i play music or games, windows wouldn't separate the bass to the sub

it's weird, i know

i dont know if anyone else experience this issue, though


i know what you meant buddy don’t worry,

il have a go on mine later and see if it works. I have a sub and rears somewhere lying around. Il let you know.

 

i never said anything about any jacks not working I just meant it won’t work via macos that’s all ...:hysterical:

Edited by AudioGod

Share this post


Link to post
Share on other sites
Just now, AudioGod said:


i know what you meant buddy don’t worry,

il have a go on mine later and see if it works. I have a sub and rears somewhere lying around. Il let you know.

thx a lot for the help, friend

it's no bother really, so i'm not in a hurry 

thx again for the tips :)

Share this post


Link to post
Share on other sites

Alternative EFI - N-D-K Fork of OpenCore (31/12/2019)

 

Big Thanks to @texem for hes countless hours of hard work and help to bring a fully working version of OpenCore for you all to try.

We have chosen to use N-D-K's Fork of OpenCore as it works happily alongside windows and has a lot of features and changes that I wish were in the original version of OpenCore,

A massive thank you and show of Respect to @n.d.k for he's simply brilliant work.

 

Support on this thread for these EFIs won't be great but @texem and myself will help out where we can. 

 

PLEASE NOTE - All bios settings and guide notes are the same for these EFI's apart from I've set it to smbios 1,1 so your also need to set your IGPU to disabled in the bios but your welcome to try and use smbios 19,1 with IGPU enabled instead and if it works for you then please do report back and let me know.

 

OpenCore Fork Z390 MASTER Navi Vega.zip - Vega 56/64 Navi (5700 XT) & Radeon VII DSDT

OpenCore Fork Z390 MASTER Polaris.zip - RX Polaris Series DSDT

Edited by AudioGod

Share this post


Link to post
Share on other sites

@gibbo592 Ok so let’s start again on this thread using the correct files for your build. Follow what I say to do 1 step at a time brah, I’m on hand to help you if need be :)

 

Use this EFI Buddy

(keep the EFI vanilla and don’t add anything to it other then your details)

Z390 Master Vega-Navi EFI.zip

 

You will need to reset the bios by Removing the power cable and then pulling the battery on the motherboard for a few minutes to totally clear the nvram before loading into Catalina with the new EFI for the first time.

Use the unlocked MSR Bios profile if you can and untick kernelPM in the clover config if you do use it.

 

as soon as you do the bios reset it will resolve it so save your bios as a profile and do a full bios reset and this will totally clear out your native nvram and the failure to allocate memory will be gone once and for all.

 

also do this do this

 

I have made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam.

It also has all the bios settings listed on this guide pre done and saved onto the profile.



MSR Unlocked.zip

 

1 - Download the profile and save it to a USB Key

2 - Go into the bios,

3 - Load the profile, 

4 - Save and exit

5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that.

6 - Reset your Motherboard by removing the power cable and then remove the battery from the motherboard for a minute or two to clear out the bios fully.

7 - Go back into your bios and load back in the saved profile you made,

8 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 

9 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked

 

    PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again

 

Edited by AudioGod

Share this post


Link to post
Share on other sites
10 minutes ago, AudioGod said:

@gibbo592 Ok so let’s start again on this thread using the correct files for your build. Follow what I say to do 1 step at a time brah, I’m on hand to help you if need be :)

 

Use this EFI Buddy

Z390 Master Vega-Navi EFI.zip

 

You will need to reset the bios by Removing the power cable and then pulling the battery on the motherboard for a few minutes to totally clear the nvram before loading into Catalina with the new EFI for the first time.

Use the unlocked MSR Bios profile if you can and untick kernelPM in the clover config if you do use it.

 

as soon as you do the bios reset it will resolve it so save your bios as a profile and do a full bios reset and this will totally clear out your native nvram and the failure to allocate memory will be gone once and for all.

 

also do this do this

 

I have made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam.

It also has all the bios settings listed on this guide pre done and saved onto the profile.



MSR Unlocked.zip

 

1 - Download the profile and save it to a USB Key

2 - Go into the bios,

3 - Load the profile, 

4 - Save and exit

5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that.

6 - Reset your Motherboard by removing the power cable and then remove the battery from the motherboard for a minute or two to clear out the bios fully.

7 - Go back into your bios and load back in the saved profile you made,

8 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 

9 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked

 

    PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again

 

Thanks mate I’ll try tomorrow and let you know

Share this post


Link to post
Share on other sites
4 minutes ago, gibbo592 said:

Thanks mate I’ll try tomorrow and let you know


No problem buddy, Let me know how it goes and have a great new year :) 

 

by the way make sure you use bios F10 for the motherboard as that’s what my dsdt is designed for.

Edited by AudioGod

Share this post


Link to post
Share on other sites
11 minutes ago, AudioGod said:

@gibbo592 Ok so let’s start again on this thread using the correct files for your build. Follow what I say to do 1 step at a time brah, I’m on hand to help you if need be :)

 

Use this EFI Buddy

Z390 Master Vega-Navi EFI.zip

 

You will need to reset the bios by Removing the power cable and then pulling the battery on the motherboard for a few minutes to totally clear the nvram before loading into Catalina with the new EFI for the first time.

Use the unlocked MSR Bios profile if you can and untick kernelPM in the clover config if you do use it.

 

as soon as you do the bios reset it will resolve it so save your bios as a profile and do a full bios reset and this will totally clear out your native nvram and the failure to allocate memory will be gone once and for all.

 

also do this do this

 

I have made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam.

It also has all the bios settings listed on this guide pre done and saved onto the profile.



MSR Unlocked.zip

 

1 - Download the profile and save it to a USB Key

2 - Go into the bios,

3 - Load the profile, 

4 - Save and exit

5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that.

6 - Reset your Motherboard by removing the power cable and then remove the battery from the motherboard for a minute or two to clear out the bios fully.

7 - Go back into your bios and load back in the saved profile you made,

8 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 

9 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked

 

    PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again

 

Thanks mate I’ll try tomorrow and let you know

Share this post


Link to post
Share on other sites

Hi

 

Looking forward to try this on my Windows machine. After reading several nights on how to get MacOS on my build the more I read the more I got confused. The information given on several sites sometimes differs alot. :ninja:

What's given here as information seems pretty straight forward so I'm going to give it a try soon.

 

Currently running:

 

9700k

Aorus Master Z390 with F10 bios

Corsair Vengeance 16gb 3200

EVO 970 NVME with W10

EVO 960 currently used as data but will be used for MacOS

WD Black 4TB for data

NVIDIA GT1030  :w00t:  not playing games on W10 atm but might change in the future.

Fractal Celcius S24 AIO cooler   problem?

 

I read that the NVIDIA card is not supported nevertheless Catalina would also run on iGFX which is what I want to do. What I don't is how to disable the GT1030. Could someone give correct information of how to disable it?

If it wouldn't work for Catalina installing Mojave is good for me too, my MBP 2012 is also running on Mojave.

 

Thanks in advance for your input / precious help & happy new year all.

 

 

 

Edited by decat

Share this post


Link to post
Share on other sites
1 hour ago, decat said:

Hi

 

Looking forward to try this on my Windows machine. After reading several nights on how to get MacOS on my build the more I read the more I got confused. The information given on several sites sometimes differs alot. :ninja:

What's given here as information seems pretty straight forward so I'm going to give it a try soon.

 

Currently running:

 

9700k

Aorus Master Z390 with F10 bios

Corsair Vengeance 16gb 3200

EVO 970 NVME with W10

EVO 960 currently used as data but will be used for MacOS

WD Black 4TB for data

NVIDIA GT1030  :w00t:  not playing games on W10 atm but might change in the future.

Fractal Celcius S24 AIO cooler   problem?

 

I read that the NVIDIA card is not supported nevertheless Catalina would also run on iGFX which is what I want to do. What I don't is how to disable the GT1030. Could someone give correct information of how to disable it?

If it wouldn't work for Catalina installing Mojave is good for me too, my MBP 2012 is also running on Mojave.

 

Thanks in advance for your input / precious help & happy new year all.

 

 

 


Hi,

Everything in your part list is good apart from the gpu. That will give you a lot of trouble and yes the only way to get the system to work would be to disable the gpu via the dsdt and then use the igpu for macOS. What would be a much better thing to do would be to get rid of the GT1030 and get a AMD RX570 instead.

the way you would like to do it will cause you pure headaches brah. 

Share this post


Link to post
Share on other sites
Posted (edited)

I just wanted to take the time out to thank everybody on this thread for all the input, suggestions and fault finding that’s made the EFIs for this guide get better and better.

Without you lot our hacks wouldn’t be as stable as they are and this thread wouldn’t be possible so again thank you everybody and a very Hacky New Year To you all. :thumbsup_anim:

 

Heres to 2020 and some serious hard work attempting to make out Hacks even better then they already are.
Thanks again everybody, your all awesome (even the ones that annoy me sometimes you know who you all are....you keep me on my toes..lol).

 

@larabee @texem @MaLd0n @glasgood you guys are on a next level of awesome so an extra huge show of respect goes out to you guys as again without any of you four the two threads I maintain would not exist now. Big Love and Respect To you all. :)

 

HACKY NEW YEAR EVERYBODY LETS MAKE 2020 A GOOD ONE. 

Edited by AudioGod

Share this post


Link to post
Share on other sites
22 hours ago, AudioGod said:


Hi,

Everything in your part list is good apart from the gpu. That will give you a lot of trouble and yes the only way to get the system to work would be to disable the gpu via the dsdt and then use the igpu for macOS. What would be a much better thing to do would be to get rid of the GT1030 and get a AMD RX570 instead.

the way you would like to do it will cause you pure headaches brah. 

 

 

Hi,

thanks for the info.

Is it possible to explain how it would cause headaches knowing the egpu would be disabled?

The GT1030 was cheap & is only used for the TV when the misses wants to watch Netflix etc and doesn't draw much power.

Last night I read that some RX 550 / 560 also work, they just need to have a baffler of polaris chip & enough stream processors. Could you confirm? If there's no downside on using the 550/560 I might get one of these instead, they're not expensive (100 eur for an Asus Arez RX 550 2 gb or 110 for the 4gb) + got warranty.

 

Thanks in advance & best wishes.

Share this post


Link to post
Share on other sites
Posted (edited)
7 minutes ago, decat said:

 

 

Hi,

thanks for the info.

Is it possible to explain how it would cause headaches knowing the egpu would be disabled?

The GT1030 was cheap & is only used for the TV when the misses wants to watch Netflix etc and doesn't draw much power.

Last night I read that some RX 550 / 560 also work, they just need to have a baffler of polaris chip & enough stream processors. Could you confirm? If there's no downside on using the 550/560 I might get one of these instead, they're not expensive (100 eur for an Asus Arez RX 550 2 gb or 110 for the 4gb) + got warranty.

 

Thanks in advance & best wishes.


your headaches will come when your switching from one OS to the other and will have to do things like shut down and change outputs and the bios every time you jump around. Your also have to get the dsdt patched in my EFI to disable the 1030 but that can be done no problem. It’s just gonna be a hassle for you and it will annoy you into changing it eventually . Yes the RX560 works fine, I’ve not had any confirmation on the RX550 but that should work too.

you can also pick up a Rx 570 580 on eBay for around 100 - 110 euros very easily if you don’t mind it being used?

Edited by AudioGod

Share this post


Link to post
Share on other sites

Changing the outputs is indeed something I want to avoid. I was able to order new a Sapphire Pulse RX 580 8gb for 140£ & should be delivered in the beginning of next week.

Looking forward to fiddle around, thanks again for the clarification.

Share this post


Link to post
Share on other sites
2 minutes ago, decat said:

Changing the outputs is indeed something I want to avoid. I was able to order new a Sapphire Pulse RX 580 8gb for 140£ & should be delivered in the beginning of next week.

Looking forward to fiddle around, thanks again for the clarification.


you should of told me you were in the uk, I have plenty hardware that I sell online. :) 

Share this post


Link to post
Share on other sites
Just now, decat said:

Living in Belgium, just converted the cost to pound because OP is UK based. :lol:

 


haha ok :thumbsup_anim:

Share this post


Link to post
Share on other sites
Posted (edited)
On 12/31/2019 at 9:46 PM, gibbo592 said:

Thanks mate I’ll try tomorrow and let you know

Happy New Year everyone !

 

Thanks for the help thus far tried several times sidecar wont work Ipad connects via bluetooth when selecting sidecar icon tuns blue briefly and then nothing ! I also notice my benchmarks are nowhere near yours and cant get video hardware acceleration with Radeon VII 

 71D4E155-DCEC-4D43-9CFF-A5C2F03B9255.jpeg.9f0a6894c664cf5b6615423aee211935.jpeg9BC2B196-F507-4797-8A3F-8A247FC8CCB8.jpeg.26ba8209f485358fa733cbfdff211434.jpegB475F6AE-6842-4DAE-ACA2-B971AE6B57E2.jpeg.ebd7c952ccdeea994cef823f2754f910.jpeg

 

Edited by gibbo592

Share this post


Link to post
Share on other sites
Posted (edited)
2 hours ago, gibbo592 said:

Happy New Year everyone !

 

Thanks for the help thus far tried several times sidecar wont work Ipad connects via bluetooth when selecting sidecar icon tuns blue briefly and then nothing ! I also notice my benchmarks are nowhere near yours and cant get video hardware acceleration with Radeon VII 

 71D4E155-DCEC-4D43-9CFF-A5C2F03B9255.jpeg.9f0a6894c664cf5b6615423aee211935.jpeg9BC2B196-F507-4797-8A3F-8A247FC8CCB8.jpeg.26ba8209f485358fa733cbfdff211434.jpegB475F6AE-6842-4DAE-ACA2-B971AE6B57E2.jpeg.ebd7c952ccdeea994cef823f2754f910.jpeg

 


Ok for your gpu hardware acceleration, your have to experiment with different shiki values until you find the correct one for your Radeon VII.

Use this guide to work it out. (Same reason sidecar isn’t working for you)

 

https://github.com/acidanthera/WhateverGreen/blob/master/Manual/FAQ.Chart.md

 

as for your benchmark scores,

use luxmark for the gpu and cinibench for the cpu and show me your results.

i wouldn’t try and compare them to mine as I’m a overclocker and custom system builder by trade so without meaning to be big headed people are always going to struggle to match my benchmark scores. I’m a cheat too and have a golden 9900k that not many 9900ks can match.
show me your results and il know if it’s correct or not buddy. :) 
 

If you like I can also send you a smbios macpro 1,1 version of the EFI that you use with the igpu disabled? (Or just change the smbios in the clover config and generate a new serial number and details)

The Radeon VII might work better that way for you.

note - sidecar doesn’t work with smbios 1,1

Edited by AudioGod

Share this post


Link to post
Share on other sites
Posted (edited)

Hi,

i am quite new to the topic, but I didnt find any information if I can use this EFI package (and which of those) with my iGPU of the Aorus Master?

I dont have any AMD graphics card.

 

And if yes, what EFI package should i use? what settings?

 

Thank you

Edited by xanti1

Share this post


Link to post
Share on other sites
While waiting for the card some practical questions:
 
1.  Already got Windows 10 running on the machine and has it's own SSD (500GB 970 EVO NVME). Will it still work after the  install of Catalina or does it needs to be reinstalled? Windows was wiped  a week ago so doing a fresh install if needed won't be much of a hassle.
 
2. Catalina will be installed on a 500GB 960 EVO NVME. Is it better to keep is at a whole drive or can I split it up?
 
3. The last drive I'm using is a 4TB WD Black in NTFS. It contains all my music & the misses's movies etc. I don't really need access to all of it when using Catalina but I do need a let's say 250GB accessible from both OS'es. It's just needed for music files and traktor / rekordbox library thus no big files.  Splitting the Catalina SSD in half would be the easiest (AFPS/FAT32) but if not possible / if it could cause conflicts I'll need to find a solution to move all the stuff away from the WD Black and split it in two.
 
Thanks in advance.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      This guide is a work in progress and will be updated as I refine the installation.
       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec SMBIOS MacModel MacMini 8,1 Unsupported M.2 PCIe x1 2230 Intel Wi-Fi (currently disabled in BIOS).  I may replace this with Brcm, but am using only Ethernet (IntelMausi) for now.  
      Installation Steps: To be provided
      See attached EFI and /L/E kexts in EliteDesk.zip archive See installation methodology here  
      What is not working
      Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card).  
      What is not tested
      USB c 3.1 port Microphone port  
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions
      (No solution yet - work-around is to use Firefox) Safari has problems loading insanelymac web pages after sleep / wake.  Work-around: use Firefox or reboot.  I have seen reports in forums where Safari issues are experienced after sleep / wake on a real Mac.  Not sure if the problems are related.  I suspect that it might be related to streaming video on InsanelyMac pages (since I haven't observed the issue on "static" pages). (Solved and included in the attached EliteDesk.zip archive) Display does not fully wake after resuming from sleep (needs an extra mouse or keyboard stimulus to fully wake).  Solution is to change boot arg darkwake=0 to darkwake=2.  Other values of darkwake may work as well, but this is the first I tried and it worked. (Solved and included in the attached EliteDesk.zip archive) -disablegfxfirmware boot arg is not required with WEG.  I inadvertently left this boot arg after I encountered an endless gfx firmware update boot loop while working on my FB patching.  This boot arg is no longer necessary after completing FB patching with WEG. (Solved and included in the attached EliteDesk.zip archive): Sometimes, CMOS time is lost on shutdown or restart.  Solution is to enable Clover's Apple RTC fix in config.plist. (Solved and included in the attached EliteDesk.zip archive) headphone jack doesn't work.  Solution is to change HDEF layout-id to 28. (Solved and included in the attached EliteDesk.zip archive) System freezes on wake from sleep because of a kernel panic related to hda-gfx (my system does not have HDMI and my DP->DVI adapters do not drive monitor speakers).  Solution is to add No-hda-gfx property to HDEF as described here.  This property is recognized as a Lilu flag and prevents loading hda-gfx. (Solved and included in the attached EliteDesk.zip archive) Device (PMCR) is not defined.  Solution is a SSDT that "injects" the missing device. (Solved and included in the attached archive) eficheck is loaded (not sure why this is bad, but may be a privacy issue - see here). Solution is to add updated EFICheckDisabler kext that include Q370 chipset.  See here.  
      BIOS Version / Configuration: To be provided
      Version: 02.11.01 Rev.A  
      Clover Configuration: To be provided
       
      UHD 630 Framebuffer Patching: To be provided
       
      Current Versions
      Catalina 10.15.4.02 Clover (UEFI) r5118 Lilu.kext 1.4.4 WhateverGreen.kext 1.3.9 AppleALC.kext 1.4.9 IntelMausiEthernet 2.5.0  
      Credits To be provided
       
       




      EliteDesk800 G4 Mini - Rev 0.5.zip
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        ***The topic is for Notebooks and Desktops***   Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First... ***Update bios to last available version!***   If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app     Look at my Clover folders and understand what we really need, this is the best way to learn     1-Installation     --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder    https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system! 2-Post Installation     --Install Clover in HDD/SSD and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   3-Video     -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   -Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   -Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   -Check it, easy way   nvidia-update.command.zip by Benjamin-Dobell   4-DSDT       Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC* -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS* -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -IMEI -EC -PNLF(Nvidia/AMD) -HDMI ---To avoid problems use some patches in config.plist, don't forget!--- GLAN to GIGE 474c 414e 4749 4745 GFX0 to IGPU 47465830 49475055 HDAS to HDEF 48444153 48444546 HECI to IMEI 48454349 494d4549 SAT0 to SATA 53415430 53415441 5-SSDT   Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha https://github.com/Piker-Alpha ssdtPRGen.command.zip   or just use "plugin-type"=0x01 in DSDT, SSDT or Clover config.plist   for check Power, Frequency, Temperature and Utilization, use it Install Intel Power Gadget.pkg.zip   6-Brightness  
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
        -Clover   https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Lan driver by Mieze     -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   -Links     -FakeSmc https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   if u like, Rate Topic     It's time to Rock -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, badruzeus and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
        Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By shawnski
      i have managed to install catalina to my hackintosh, everything else seems to work be very smooth but geek bench score is very low. 490 single core, 3879 multi score
      my build is
      3930k intel,
      rx570 gpu,
      huananzhi x79,
      32gb kingston 1600,
      kingspec 512 nvme,
      Broadcom BCM94360CS2 wifi & bluetooth pci
      clover smbios i choose iMac13,2
      i installed Intel Power Gadget, screenshot here: https://prnt.sc/slit8z
      any help would be greatly appreciated.
×