Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

3,829 posts in this topic

Recommended Posts

6 minutes ago, AudioGod said:

 

@vyu01773 Yes I Made a mistake and pulled it, here try again. sorry.

like the last message said I've generated info for you so just drop the EFI folder in and let me know how it goes.

 

 

vyu01773.zip

Tried with a new catalina copy, reinstalled bios and used your profile and without.

Sadly same result.

Share this post


Link to post
Share on other sites
Advertisement
2 minutes ago, vyu01773 said:

Tried with a new catalina copy, reinstalled bios and used your profile and without.

Sadly same result.


this is a much older UHD630 EFI But still should work.

try this one. 
 

Aorus Pro Z390 EFI - Intel UHD630.zip

 

if that doesn’t work for you then I really don’t know as most of them config work for most people and the last one I just posted doesn’t use a dsdt or anything like that. 

Edited by AudioGod

Share this post


Link to post
Share on other sites

Sadly it also didn't work for me :(

I think I'll order a cheap RX 560 and use that with another profile.
 

EDIT: it didn't even boot to the installer with it. Forgot to mention that.

Edited by vyu01773

Share this post


Link to post
Share on other sites
Just now, vyu01773 said:

Sadly it also didn't work for me :(

I think I'll order a cheap RX 560 and use that with another profile.

I think you have a deeper problem personally as the last EFI should of worked 100% as it’s so basic 

Share this post


Link to post
Share on other sites
2 hours ago, hungrywallet said:

 

 

Is your ram stable?  Have you ran it through various stability tests?  Karhu's Ram Test, HCI Mem Test, or GSAT, etc?

 

I have no problems in windows. I just ran "rember" for macos for an hour and it didn't show any errors.

Share this post


Link to post
Share on other sites

I just did a geebench test and ended up with this

That seems a "tad" low compared to the results in the first post, no?

Edit -> Luxmark:

Edit2 -> OpenCL:

->

 

Edit3: Looks like there's a big difference between geekbench 4 and 5. My bad.

 

 

Edited by psycato

Share this post


Link to post
Share on other sites
6 hours ago, eSaF said:

@Tiem This my wifi/bluetooth kit a bit pricey but works oob with strong signal even though the router and p/c is separated by a wall (in different rooms).

I bought an extra one for my next build, you can get the Card and PCI-e adapter on e-bay'. I forgot to include the antennas in the pics but you get the idea.

 

 

The 2nd pic was included to show the other side of the wifi/bluetooth module.

Thanks man. Unfortunately your card is N only (no AC). I actually swapped my antennas and the Fenvi is working AMAZING since. It recognizes the keyboard at post so I may just keep it and upgrade down the line.

 

For posterity, the BCM94360CD supports AC:

 

  • Broadcom BCM94360CD supports 802.11ac MIMO 3x3 (max speed is 1.3Gbps at 5GHz), and Bluetooth 4.0. This is used in iMac (2013) and Pro (2013).
  • Broadcom BCM94331CD supports 802.11n MIMO 3x3 (max speed is 450Mbps at 5GHz), and Bluetooth 4.0. This is used in iMac (2012).

Source: https://www.reddit.com/r/hackintosh/comments/70ljf3/difference_between_bcm94360cd_vs_bcm94331cd/

 

This actually looks solid: https://www.aliexpress.com/item/32782660002.html

Edited by Tiem

Share this post


Link to post
Share on other sites
32 minutes ago, Tiem said:

Thanks man. Unfortunately your card is N only (no AC). I actually swapped my antennas and the Fenvi is working AMAZING since. It recognizes the keyboard at post so I may just keep it and upgrade down the line.

 

For posterity, the BCM94360CD supports AC:

 

  • Broadcom BCM94360CD supports 802.11ac MIMO 3x3 (max speed is 1.3Gbps at 5GHz), and Bluetooth 4.0. This is used in iMac (2013) and Pro (2013).
  • Broadcom BCM94331CD supports 802.11n MIMO 3x3 (max speed is 450Mbps at 5GHz), and Bluetooth 4.0. This is used in iMac (2012).

Source: https://www.reddit.com/r/hackintosh/comments/70ljf3/difference_between_bcm94360cd_vs_bcm94331cd/

 

This actually looks solid: https://www.aliexpress.com/item/32782660002.html

 

Glad you got sorted, maybe I need to take another look at my T919 with your antennas fix some other time. Thanks for the update

Share this post


Link to post
Share on other sites
9 hours ago, psycato said:

 

I have no problems in windows. I just ran "rember" for macos for an hour and it didn't show any errors.

Try one of the apps I mentioned in Windows overnight to rule ram out of the equation. 

Share this post


Link to post
Share on other sites
9 hours ago, psycato said:

 

I have no problems in windows. I just ran "rember" for macos for an hour and it didn't show any errors.

Try one of the apps I mentioned in Windows overnight to rule ram out of the equation. 

Share this post


Link to post
Share on other sites
20 hours ago, eSaF said:

 

Glad you got sorted, maybe I need to take another look at my T919 with your antennas fix some other time. Thanks for the update

That's on me. The Fenvi has 4 antenna. I was using 2 from the card and the remaining 2 I had plugged in my antenna for my MB. Apparently Gigabyte doesn't provide a better antenna than some cheap Chinese knock-off lol.

 

But I gotta say with the proper antenna its working flawless.

 

Thanks for the pics. I still may get a real BCM card. Ali has them quite cheap. $45. Just gonna take 2 months to get here :whistle:

Share this post


Link to post
Share on other sites

Should have tried this earlier. Without the patched ACPI the mouse works...

 

EDIT: is it possible that I have a different revision that requires different patches or sth?

Edited by vyu01773

Share this post


Link to post
Share on other sites
On 1/22/2020 at 5:40 PM, AudioGod said:

 

@vyu01773 Yes I Made a mistake and pulled it, here try again. sorry.

like the last message said I've generated info for you so just drop the EFI folder in and let me know how it goes.

 

 

vyu01773.zip

I have the same problem that the USB (mouse/keyboard) stops working. I only use the iGPU. However, once I plug in an old ATI Radeon 4600 card (which does not work in this setup) USB is back. Any ideas what I can check/change?

Share this post


Link to post
Share on other sites
8 minutes ago, tuk3 said:

I have the same problem that the USB (mouse/keyboard) stops working. I only use the iGPU. However, once I plug in an old ATI Radeon 4600 card (which does not work in this setup) USB is back. Any ideas what I can check/change?


you can try removing -wegnoegpu from the clover boot arguments and see if that helps (without the gpu installed)

Share this post


Link to post
Share on other sites
11 hours ago, AudioGod said:


you can try removing -wegnoegpu from the clover boot arguments and see if that helps (without the gpu installed)

Thanks AudioGod. I now have the mouse but they behave strange. They are very slow for about 1 minute (moving is slow, typing is very slow). After a minute (of doing nothing) they are up to normal. Any ideas? If not I can live with it.

 

Share this post


Link to post
Share on other sites

Updated to 19D75a. Using OC variant with a navi card. All ok :)

Share this post


Link to post
Share on other sites
1 hour ago, tuk3 said:

Thanks AudioGod. I now have the mouse but they behave strange. They are very slow for about 1 minute (moving is slow, typing is very slow). After a minute (of doing nothing) they are up to normal. Any ideas? If not I can live with it.

 

What version of the UHD630 EFI are you using?

the one on the front page or one of the variations I was sending to somebody else?

 

Edited by AudioGod

Share this post


Link to post
Share on other sites
14 minutes ago, AudioGod said:

What version of the UHD630 EFI are you using?

the one on the front page or one of the variations I was sending to somebody else?

 

The one at the front page.

And I have another issue: The system crashes 3 sec. after wake from sleep. I traced it down to AppleAlc.kext. Once I block it wake up works - but sound is gone. Any idea on that?

Share this post


Link to post
Share on other sites
4 minutes ago, tuk3 said:

The one at the front page.

And I have another issue: The system crashes 3 sec. after wake from sleep. I traced it down to AppleAlc.kext. Once I block it wake up works - but sound is gone. Any idea on that?

Could you put your full spec up on your profile so I can see what your using please bud?

1 minute ago, Cameron Nicholson said:

Doesn't work, its ok, I'll stick with clover

 

It works really well, what’s not working for you bud!

Share this post


Link to post
Share on other sites
10 minutes ago, AudioGod said:

Could you put your full spec up on your profile so I can see what your using please bud?

Gigabyte Z390 Aorus Pro (BIOS F12d) - i5 8400 - 16GB DDR 4 RAM Vengeance - iGPU -  TL-WDN4800 WiFi

Share this post


Link to post
Share on other sites
23 minutes ago, AudioGod said:

Could you put your full spec up on your profile so I can see what your using please bud?

It works really well, what’s not working for you bud!

It just freezes within the first few seconds of boot but not at any particular point 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By tonyx86
      **********************************************************************************
      In this thread, I have fully documented the installation of macOS Catalina on my HP EliteDesk 800 G4 Mini. It is a PERFECT HackMini8,1 and is running very well for me without any issues. I hope this documentation helps you to install macOS on your hack. Please leave feedback if you think there is anything I can improve and let me know if you have any questions.
      **********************************************************************************
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       

       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec Unsupported M.2 PCIe x1 2230 Intel Wi-Fi.  A possible solution is here, but I am NOT offering any support for this.  
      macOS Installation 
      Important: You MUST BE LOGGED-IN to download attachments from this forum
      See macOS installation steps here See Known Issues here for additional installation steps that may not yet be included in my attached config files See CLOVER (UEFI) installation later in this first post
      See BIOS configuration in attached BIOS configuration PDF document
      See EFI and /L/E kexts in attached EliteDesk.zip archive See how I developed my installation methodology here See references here See instructions here for installing two M.2 2280 NVMe SSDs and one SATA HD / SSD  
      What is not working
      Microphone port  
      What is not tested
      USB c 3.1 port (I have partially tested the USB 3 functionality of the port and it seems to be working fine with the SSDT-UIAC.aml in the attached EliteDesk800.zip archive) Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card). A possible solution is here, but I am not offering any support for this.
       
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions - see here
       
      BIOS Version / Configuration
      Version: 02.11.01 Rev.A or 02.12.00 Rev.A See attached BIOS configuration in PDF document "HP EliteDesk 800 G4 Mini BIOS Configuration.pdf" Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers OcQuirks (replaces AptioMemoryFix) Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching
      See here to understand my graphics properties for use with WhateverGreen.kext Read this to see my attempt at graphics patching without WhateverGreen.kext (WEG) to get a better understanding of what WEG is doing
       
      Current Versions
      Catalina 10.15.7 Clover (UEFI) r5122 Lilu.kext 1.4.7 WhateverGreen.kext 1.4.2 AppleALC.kext 1.5.2 IntelMausi.kext 1.0.3 (acidanthera version, not IntelMausiEthernet) NVMeFix.kext 1.0.3 EFIChecikDisabler.kext 0.5  
      Credits To be provided
       
      ScreenShots
       
       
      HP EliteDesk 800 G4 Mini BIOS Configuration.pdf
      EliteDesk800 G4 Mini - Rev 1.2.zip
    • By Donw35
      09222020 - Big Sur Beta 8 update, no issues.
      09192020 - Big Sur Beta 7 update, no issues.
      09042020 - Big Sur Beta 6 update, no issues.
       
      I have moved on with this and do not use my HP G2 for Hackintosh, its mainly used for Kali Linux for Packet analysis these days, with that said I am using the HP 840 G3 for Hackintosh. I transitioned to OpenCore and Big Sur for this laptop but feel free to continue to ask questions. 
       
      My G3 has the BCM84360CS2 mod, I got the module from eBay for $10 and the adapter for $10 off amazon.
       
      Big Sur Beta 5 is working using the below EFI folder. OpenCore 6.1.0 and latest kexts
       
      Method: USB Big Sur installation
      Create an Big Sur Beta5 or Catalina USB installer (google is your friend here, plenty of tutorials there) Mount the EFI partition of your USB installer using Clover Configurator Copy the EFI file attached here. Boot your laptop using F9 and choose the USB installer and follow the prompts  
       
       
      Catalina and old method in the Spoiler
       
       
      Credits go to Jake Lo for creating this EFI file. I did make some changes to his, this one is Open Core 6.1.0 and latest Lilu.kext and WhatEverGreen.kext
      HP_840_G3_BSB5.zip
    • By mridhulofficial
      Hi team,
      Please advice me for the issue. Already gone through other posts.
      My spec Ryzen 9 3900x and Gigabyte B550 Aorus Pro AC motherboard.
      I installed Cataliana on my system .. everything looking perfect exept ethernet. Installed LucyRTL8125Ethernet.kext and ethernet is showing on network window but no internet connection. Adjusted hardware settings in network as Manually/100baseTX/full-duplex, flow-control but issue not fixed.
      Please help me.
       
      Thanks is advance.
    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
        1 -Create a USB bootable
       
      Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
       
      Catalina
      installScript_allfullapp.zip
       
      Big Sur
      installScript_1016fullapp.zip
       
      Credits: crazybirdy
       
      Copy Catalina / Big Sur installer to Applications folder, open terminal and run
       
      Catalina
       
       
      Big Sur
       
       
      If you want check one step by step, check here
       
      -Opencore Vanilla Tutorial
      https://tinyurl.com/ycvcnp8h
       
      2- EFI folder USB installation
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/yxsw7d3t
       
      3- EFI folder SSD
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD 
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD
      https://tinyurl.com/yxsw7d3t
       
      4- Start Fine Tune
       
      Run this app and post full dump here for full ACPI solution
       
      RunMe.app
      https://tinyurl.com/y9562hz7
       
       
      If you like a SSDT way, here we go
      SSDT-OLARILA.aml.zip
       
      5- USB Solution
       
      Use these kexts, enable XHCI port limit patch
       
      USB INTEL SERIE 400.zip
       
      and follow this tutorial for remap USB ports
       
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU  
      --SCREENSHOTS--































      -If you want to buy me a beer - Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By asheenlevrai
      Hi
       
      I recently built my 1st ryzentosh.
      I also used Opencore (0.6.1) for the 1st time and followed the install guides on Dortania.
       
      Now I need to map my USB ports and apparently it's not achieved the same way on AMD platforms compared to what I was "used to" on Intel platforms.
       
      The guide on Dortania is a bit confusing to me since there is information that is not clearly labelled as "for Intel" or "for AMD" and I thus don't understand very well what I should and shouldn't do.
       
      Can anyone give me advice or point towards as comprehensive tutorial intended for AMD-based builds.
       
      Thank you very much in advance for your help.
       
      Best,
      -a-
×