Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

1,682 posts in this topic

Recommended Posts

@ AudioGod - Aha!!! Somehow I knew you had that trait in you (OCD) but I'm happy you do :lol:

 

Share this post


Link to post
Share on other sites
Advertisement
5 minutes ago, AudioGod said:

Good luck :thumbsup_anim:

 

 So I did that and I see no changes in the USB information (the screens I uploaded earlier)

Share this post


Link to post
Share on other sites
Just now, WizeMan said:

 

 So I did that and I see no changes in the USB information (the screens I uploaded earlier)

Really?

when I’m back at home il send you pictures of what should happen.

i have the same card sitting at home at the moment and it worked for me.

did you attach the kexts inside the oc config?

Share this post


Link to post
Share on other sites
12 minutes ago, AudioGod said:

Really?

when I’m back at home il send you pictures of what should happen.

i have the same card sitting at home at the moment and it worked for me.

did you attach the kexts inside the oc config?

 

Weird thing. I am sure I saved config plist but now I opened it and the entries are nowhere to be found. I'll do it again and report back.

 

Indeed, tried that again and nothing changes in the USB section:

1526098037_Screenshot2020-01-21at4_50_05PM.thumb.png.3bee0127a50a64df02a61d70ac6fabf4.png

 

YES I DID BOOT OFF THE TESTING STICK :D

 

Edited by WizeMan

Share this post


Link to post
Share on other sites
15 minutes ago, WizeMan said:

 

Weird thing. I am sure I saved config plist but now I opened it and the entries are nowhere to be found. I'll do it again and report back.

 

Indeed, tried that again and nothing changes in the USB section:

1526098037_Screenshot2020-01-21at4_50_05PM.thumb.png.3bee0127a50a64df02a61d70ac6fabf4.png

 

YES I DID BOOT OFF THE TESTING STICK :D

 


oh {censored} sorry it’s the wrong batchram kext.

il send you the right one in abit.

 

Share this post


Link to post
Share on other sites
6 hours ago, AudioGod said:

Did you try with and without the Broadcom fix I sent you?

Sorry, had to go to bed. 

 

I have tried with all different combinations of the kext's you gave me. Still slow internet, laggy mouse when doing a upload test, jittery mouse in normal use.

 

 

Screen Shot 2020-01-22 at 7.30.42 am.png

Share this post


Link to post
Share on other sites
21 minutes ago, Cameron Nicholson said:

Sorry, had to go to bed. 

 

I have tried with all different combinations of the kext's you gave me. Still slow internet, laggy mouse when doing a upload test, jittery mouse in normal use.

 

 

Screen Shot 2020-01-22 at 7.30.42 am.png


Make sure you have your Fenvi card on the last slot of your motherboard and the header cable on the F_USB2 connector 

Share this post


Link to post
Share on other sites
6 hours ago, WizeMan said:

 

Weird thing. I am sure I saved config plist but now I opened it and the entries are nowhere to be found. I'll do it again and report back.

 

Indeed, tried that again and nothing changes in the USB section:

YES I DID BOOT OFF THE TESTING STICK :D

 

If I can chime in. You definitely don't need all those kexts. I have the same card and it is recognized and works perfectly.

 

These are the only kexts you need (if you have a pretty vanilla system without a bunch of other hardware or peripherals attached):

 

992299201_ScreenShot2020-01-21at1_33_35PM.png.31d8f0404cad77e333f137d96b24e6c7.png

 

While I know you want the problem fixed, but just arbitrarily chucking kexts at it isn't really the best way to go about it. What FENVI card do you have? I know MQUPIN sells them as well (which is what I have): https://www.amazon.ca/gp/product/B07Z3MN5XM/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

 

The native card is a BCM94360CD but you have BCRM20702 listed, so it's not being identified properly:

 

1298942662_ScreenShot2020-01-21at1_44_59PM.png.b4cd3c1f284284f25cf8e3cc9b64d3ff.png

 

I have nearly an identical system. I say start over. Or just run the EFI (after adding in your SMBIOS details) off a Catalina USB installer. That's a pretty clean way of testing hardware without having to deal with caching or NVRAM or anything else.

 

Another option is to toss it into a PC running Windows and ensure it's actually working correctly. You could have just got a bad card.

 

As for unlocking your MSR, you have the Pro (not WIFI), so just download and flash the unlocked BIOS that AG has linked in his guide. If you don't want to do that, you can do it using https://github.com/datasone/grub-mod-setup_var/releases. The offset is 0x5C1. (Make sure you use setup_var_3, it will still throw an error but will patch your board.

 

But I assure you, you don't need any BT kexts. It works OOB, that's why the card is so popular.

 

Lastly, ordering in OC matters. Just FYI. 

Share this post


Link to post
Share on other sites
25 minutes ago, Tiem said:

If I can chime in. You definitely don't need all those kexts. I have the same card and it is recognized and works perfectly.

 

These are the only kexts you need (if you have a pretty vanilla system without a bunch of other hardware or peripherals attached):

 

992299201_ScreenShot2020-01-21at1_33_35PM.png.31d8f0404cad77e333f137d96b24e6c7.png

 

While I know you want the problem fixed, but just arbitrarily chucking kexts at it isn't really the best way to go about it. What FENVI card do you have? I know MQUPIN sells them as well (which is what I have): https://www.amazon.ca/gp/product/B07Z3MN5XM/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

 

The native card is a BCM94360CD but you have BCRM20702 listed, so it's not being identified properly:

 

1298942662_ScreenShot2020-01-21at1_44_59PM.png.b4cd3c1f284284f25cf8e3cc9b64d3ff.png

 

I have nearly an identical system. I say start over. Or just run the EFI (after adding in your SMBIOS details) off a Catalina USB installer. That's a pretty clean way of testing hardware without having to deal with caching or NVRAM or anything else.

 

Another option is to toss it into a PC running Windows and ensure it's actually working correctly. You could have just got a bad card.

 

As for unlocking your MSR, you have the Pro (not WIFI), so just download and flash the unlocked BIOS that AG has linked in his guide. If you don't want to do that, you can do it using https://github.com/datasone/grub-mod-setup_var/releases. The offset is 0x5C1. (Make sure you use setup_var_3, it will still throw an error but will patch your board.

 

But I assure you, you don't need any BT kexts. It works OOB, that's why the card is so popular.

 

Lastly, ordering in OC matters. Just FYI. 


I do have the MQUPIN and I am not facing any issues. Actually I do also have unlock with Apple Watch working pretty solid as well. I am normally using the provided EFI same Kexts as yours, I just tried these additional Kexts upon @AudioGod’s request. I don’t normally use them.

 

Is your card identified correctly in your setup? 
 

Regarding the MSR unlock, Bluetooth is junky and devices disconnect upon boot when I uncheck kernelPM OR when I disable the lock flags on the OC config.plist (after having loaded the unlock profile of course). Maybe the fault is that my card is not recognized properly? And I’m curious as to why this is happening as this is how it is recognized with the stock EFI kexts as well.

Edited by WizeMan

Share this post


Link to post
Share on other sites

Ya my card works OOB. And I have the same MQUPIN. So just to be clear, it's your BT that's not working properly? But your WIFI is fine? The card has 4 antennas, one of which is dedicated for BT (not sure which one that is, but would love to know). The rest all drive WIFI. It could be that the signal is being attenuated. I have the WIFI variant of this board so I used the antenna from Gigabyte which is better quality and has quite a bit of length to the cables so it's not buried in the back of your PC.

 

IMO, you got a bad card. I would pull it or try it in another OS. It works great in Windows with the appropriate drivers. First ensure the card is actually working as it should before you toss kexts at it. Because I can tell you that macOS does indeed support the card OOB. No fiddling, nothing.

 

If the card is indeed working, maybe pick up some better antennas. I have been thinking about these: https://www.amazon.ca/COVVY-Dual-Band-Connector-Wireless-Extender/dp/B07TQ4Y47D/ref=pd_sbs_147_12?_encoding=UTF8&pd_rd_i=B07TQ4Y47D&pd_rd_r=633adfd9-9eb9-4404-a720-b82f1327d6dc&pd_rd_w=oVTIx&pd_rd_wg=lHBxQ&pf_rd_p=dbebb38c-0e3d-4a67-ac15-432d7c7a2789&pf_rd_r=CWFFRSGN6RDH4R9TNZ6W&psc=1&refRID=CWFFRSGN6RDH4R9TNZ6W

 

You could just grab 2, just to boost the BT.

 

EDIT: Actually how does the BT work when you're in post (or the BIOS)? I find the card is a bit twitchy, where sometimes it picks up the BT device (I have a wireless Apple Keyboard I'm using) fast enough for me to hit F12 to get the boot options and other times, it lags behind to where OC/Clover has already loaded before it connects.

 

The card works but it isn't the greatest. I'm still hunting for something that has better performance and reliability.

Edited by Tiem

Share this post


Link to post
Share on other sites

@Tiem I was just trying to get to the bottom of he’s problem and sometimes chucking kexts that have a purpose does make sense, yes your right it is a native card but to find out what’s going on with he’s system I need to try different steps and that was one of them So while I understand totally what you mean you should also realise that I am just taking steps to try and help pinpoint what’s going on so I can find a better fix for him. :)

Edited by AudioGod

Share this post


Link to post
Share on other sites

@WizeMan

 

Hmm, there's something definitely up with the EFI. I was just copying over files to my NAS via WIFI. Lost connection on my keyboard and my mouse (G903 on a dongle) got all jittery. No such issues in Clover.

 

EDIT: Lost the Apple Watch unlock option (came back in a few minutes). Just out of curiosity, do you have anything else connected that's wireless (BT, Dongle, etc.)?

 

Ok after some reading, I'm gonna say you're card is likely gone. I can't speak for the proper Fenvi's but the knock-off by MQUPIN isn't that great. I still have time to return it so I'm going to likely send it back to Amazon and grab something else.

Edited by Tiem

Share this post


Link to post
Share on other sites

If I may chime in - I have one of the Fenvi T919 Cards worked great in Sierra and High Sierra oob no problem in both OS X and Windows. The problem started when I upgraded to Mojave, It would connect but the wifi would be constantly hunting for connection special after sleep/wake plus the Bluetooth would be lost registering as not install. After trying numerous fixes to no avail, I tossed the card and bought a genuine Apple WiFi/Bluetooth Combo with a PCIe Adapter (a bit pricey) and never had that problem again. Great strong signal, instant connection at boot up and between wake /sleep. I must add the T919 was ok on the Windows side but later became glitchy on Mac side so what changed I don't know and at this stage don't care :). Not saying they are no good just mine became unusable.

Share this post


Link to post
Share on other sites

@eSaF I am returning my knock off T919 but ordered a real one. After what you said, I don't think it'll be any better really. Can you give me more details of what you got exactly? Having crappy wireless is not something I want. I find the Fenvi to be pretty unreliable. Sometimes it connects at post, not others. Pretty annoying when you're trying to enter your BIOS.

Share this post


Link to post
Share on other sites

Hiya,

 

Sorry guys I went to bed then work. I am using the EFI for 12d without any relating kexts, it seems to be working better, I think. However this is still what system info reports...

 

Screen Shot 2020-01-22 at 8.00.24 pm.png

Edited by Cameron Nicholson

Share this post


Link to post
Share on other sites

Hey all,

 

I originally posted this in this thread ->

But there seems to be a bit more lively over here, so I'll copy my post here.

 

Install went more or less without a hickup, and everything seemed to be working perfectly. However, I'm having these weird small lags where the application I'm in will just stop responding and/or keyboard input stops. The dreaded spinning rainbow wheel shows up now and then. Every UI transition is buttery smooth, however, so I dont think it is related to the GPU? It seems to be completely random. There is no CPU spike going on (I've got Activity monitor up at all times monitoring the state of things) Also, some programs seem to open very random, i.e activity monitor takes a good 7-8 seconds with the spinning wheel.

 

This is my first hackintosh, so I'm kind of at a loss at how I should even start looking for what's wrong.. 

 

My setup:

9900k

Aorus Master

Sapphire Nitro+ Radeon RX 580 8GB

64 gb memory

1080ti disabled by properties

firmware F11c

2x 1TB 970 Evo Plus (one for windows and one for Catalina)

fenvi T919 (BCM94360CD)

 

Please let me know if there is any other information I can provide that'll help in troubleshooting..

 

Edited by psycato

Share this post


Link to post
Share on other sites

@Tiem This my wifi/bluetooth kit a bit pricey but works oob with strong signal even though the router and p/c is separated by a wall (in different rooms).

I bought an extra one for my next build, you can get the Card and PCI-e adapter on e-bay'. I forgot to include the antennas in the pics but you get the idea.

Screenshot 2020-01-22 at 14.12.55.png

Screenshot 2020-01-22 at 14.14.09.png

The 2nd pic was included to show the other side of the wifi/bluetooth module.

Share this post


Link to post
Share on other sites
1 minute ago, vyu01773 said:

No luck so far

Ah ha, your back.

ok so where am I up too with you on test wise? 

 

Share this post


Link to post
Share on other sites

You sent me two additional iGPU builds but mouse and keyboard are still unresponsive in the catalina installer.

Share this post


Link to post
Share on other sites
Just now, vyu01773 said:

You sent me two additional iGPU builds but mouse and keyboard are still unresponsive in the catalina installer.

Ok Yes I remember, give me 20 mins if that and il send you a new EFI to try. Il suss out your config don’t worry, I’m on it! :) 

Share this post


Link to post
Share on other sites
1 minute ago, vyu01773 said:

Tried the last one and it also didn't work. Did you mean to delete it?

 

@vyu01773 Yes I Made a mistake and pulled it, here try again. sorry.

like the last message said I've generated info for you so just drop the EFI folder in and let me know how it goes.

 

 

vyu01773.zip

Share this post


Link to post
Share on other sites
5 hours ago, psycato said:

Hey all,

 

I originally posted this in this thread ->

But there seems to be a bit more lively over here, so I'll copy my post here.

 

Install went more or less without a hickup, and everything seemed to be working perfectly. However, I'm having these weird small lags where the application I'm in will just stop responding and/or keyboard input stops. The dreaded spinning rainbow wheel shows up now and then. Every UI transition is buttery smooth, however, so I dont think it is related to the GPU? It seems to be completely random. There is no CPU spike going on (I've got Activity monitor up at all times monitoring the state of things) Also, some programs seem to open very random, i.e activity monitor takes a good 7-8 seconds with the spinning wheel.

 

This is my first hackintosh, so I'm kind of at a loss at how I should even start looking for what's wrong.. 

 

My setup:

9900k

Aorus Master

Sapphire Nitro+ Radeon RX 580 8GB

64 gb memory

1080ti disabled by properties

firmware F11c

2x 1TB 970 Evo Plus (one for windows and one for Catalina)

fenvi T919 (BCM94360CD)

 

Please let me know if there is any other information I can provide that'll help in troubleshooting..

 

 

 

Is your ram stable?  Have you ran it through various stability tests?  Karhu's Ram Test, HCI Mem Test, or GSAT, etc?

Edited by hungrywallet

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 04/02/2020
      EFI Update - 04/02/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      AG Clover Z390 Master Navi Vega EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      AG Clover Z390 Master Polaris EFI.zip - RX5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (04/02/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (04/02/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By ricardos7
      Boa tarde a todos, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
      Preciso de ajuda para terminar alguns detalhes que nÃo consegui, alguém poderia ajudar?
       
      bem com a minha pasta EFI que pode ser baixada nesse post vc poderá fazer o seu hack mais facilmente nesse modelo,
      pois quase tudo ja esta configurado e pronto pra uso.
       
      ESPECIFICAÇÕES TÉCNICAS
      Processador Intel Core i7 - 6ª Geração Intel Core i7-6500U
      Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
      Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
      Armazenamento Capacidade: 240 GB SSD
      Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
      Webcam integrada de alta definição (720p) com microfone digital
      Gráfico Integrado Intel HD 520
      NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
      Áudio Realteck ALC255

      Dell Wireless 1707 WiFi, chip ar9565
      1x  HDMI 1.4ª
      2x USB 3.0
      1x USB 2.0
      1x Ethernet 10/100 RJ-45
      1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
      Leitor de Cartão
      Tipo: SD, SDHC, SD3.0, MS, MS Pro
      Alimentação Bivolt 3 células 43Wh
       
       
      O QUE NÃO FUNCIONA?
      BRILHO DA TELA
      BLUETOOTH
      SONO (Hibernação)
      HDMI (audio) video funciona mais a tela do note fica preta ao conectar o cabo HDMI
      GRAFICOS DEDICADOS NVIDEA 930M (DESATIVADO)
       
      O QUE FUNCIONA?
       
      GRAFICOS INTEL
      WI-FI - a intel original foi substituída pela DELL dw1707 ar9565
      AUDIO
      TECLADO
      TRACKPAD (com gestos)
      TOUCHSCREEN (com alguns gestos)
      TECLAS  DE ATALHO
      PLACA DE REDE RJ45
      GERENCIAMENTO DE ENERGIA
       
      OBS. PARA DESATIVAR OS GRÁFICOS FOI USANDO UMA SSDT EM CONJUNTO COM A DSDT-5 E 7, DEPOIS DE APLICADO ALGUNS PACHES.
       
      A DSDT E AS SSDT
      PACHS BASICOS APLICADOS.
      Aparentemente o gerenciamento de energia está funcionando bem, pelo menos o processador parece esta bem estável.
       

       
      PASTA OTHER CLOVER (DEPOIS DESSA IMAGEM FOI ADICIONADO MAIS DUAS KEXT QUE NAO ESTAO PRESENTES NA IMAGEM, PARA FUNCIONAR
      O TOUCH E PARA O WIFI CONSEGUIR ENCONTRAR AS REDES.
       

       
      EFI 
       

       
       
       
       
      ESTAREI DEIXANDO UM LINK PARA DOWNLOAD DA MINHA PASTA EFI, CASO ALGUEM ESTEJA FAZENDO ESSE MESMO HACK ESSA PASTA PODERÁ AJUDAR.
       
      ATENÇÃO
       
      LEMBRANDO QUE OS ARQUIVOS DSDT E SSDT, SSDT DE 5 A 8 SÃO DO MEU NOTEBOOK, QUEM FOR USAR DEVER EXTRAIR E CONSTRUIR SEUS PRÓPRIOS DSDT E SSDT.
      O SSDT-EC E O SSDT-PNLF PODEM SER USADOS POIS SÃO GENERICOS.
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F PARA COLOCAR NO PENDRIVER DE INSTALAÇÃO.
      https://drive.google.com/open?id=1nPM2CNgpr7cwOkjwj7UReziqrh9xjtf1
      SE NAO SUBIR COM A Config.plist INICIAL SELECIONE A Config2.plist
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (EM USO) 14/02/2020
      https://drive.google.com/open?id=1US7j-YlufrFTasLihmUZwElyV4jBfHDg
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (ANTIGA)
      https://drive.google.com/open?id=1Q2tnoqQZ9K44Bv6k2k1yauaHCAop_ZyW
       
      QUEM PUDER AJUDAR A CORRIGIR OS PROBLEMAS RESTANTE EU AGRADEÇO, OBRIGADO.
       
       

    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
    • By MaLd0n
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×