Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

1,823 posts in this topic

Recommended Posts

Advertisement
1 minute ago, vyu01773 said:

I didn't. I'll happily try again.

Make sure your using the correct bios settings and bios revision the the dsdt 

Share this post


Link to post
Share on other sites

@mazagngy could you give the latest EFI a try and let me know if it’s ok for you please bud?

your need to update your bios to F12d but get it from gigabyte as my version posted it for the non WiFi pro.

let me know if it’s all ok for you?

 

2 minutes ago, vyu01773 said:

I loaded your bios profile.
I tried it again with EFI cleared and same result.


do you have no usb what so ever?

Edited by AudioGod

Share this post


Link to post
Share on other sites

I missed telling you that I'm in the setup/install screen.

The OS is on a USB stick that is detected because it loads up to the region selection screen.
From there the mouse and keyboard aren't recognized.

Share this post


Link to post
Share on other sites
Just now, vyu01773 said:

I missed telling you that I'm in the setup/install screen.

The OS is on a USB stick that is detected because it loads up to the region selection screen.
From there the mouse and keyboard aren't recognized.


im just gonna to recreate what your doing and see if it happens to me.

brb

Share this post


Link to post
Share on other sites

Latest Polaris EFI and 12d bios seems to work fine here ... Nice one, thanks !! 

 

incase anyone is interested, changes i made to the downloaded config was to add a Linux boot entry(meh) and also remove AppleALC kext and config.plist patch (plus audio inject to detect) and replace with VoodooHDA kext, have been doing this for a few releases now to prevent KP on wake from sleep.. For some reason i get one and i suspect from the KP its due to my monitors DP connection to the RX580 trying to wake sound from there, i have no need for this and use Voodoo as this removes the need to try and patch this feature out.. Bonus feature for me it seems to speed sleep / wake up ...

 

Panic - 

 

anic(cpu 0 caller 0xffffff8000a284e7): "AppleHDAHDMI_DPDriver::setPowerState(0xffffff80a43bfd00 : 0xffffff7f826da730, 0 -> 1) timed out after 10185 ms"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.61.1/iokit/Kernel/IOServicePM.cpp:5302
Backtrace (CPU 0), Frame : Return Address
0xffffffa76edf3b40 : 0xffffff800033bb1b 
0xffffffa76edf3b90 : 0xffffff80004733e5 
0xffffffa76edf3bd0 : 0xffffff8000464e5e 
0xffffffa76edf3c20 : 0xffffff80002e2a40 
0xffffffa76edf3c40 : 0xffffff800033b207 
0xffffffa76edf3d40 : 0xffffff800033b5eb 
0xffffffa76edf3d90 : 0xffffff8000ad24f9 
0xffffffa76edf3e00 : 0xffffff8000a284e7 
0xffffffa76edf3e50 : 0xffffff8000a280a9 
0xffffffa76edf3e60 : 0xffffff8000a3f45e 
0xffffffa76edf3ea0 : 0xffffff8000a26e58 
0xffffffa76edf3ec0 : 0xffffff800037d765 
0xffffffa76edf3f40 : 0xffffff800037d291 
0xffffffa76edf3fa0 : 0xffffff80002e213e 
 

 

Apart from that its all as released .. 

 

Cheers

Edited by Cass67

Share this post


Link to post
Share on other sites
19 hours ago, AudioGod said:

NEW Clover Major EFI and DSDT UPDATE, 15th January 2020 (Use With Bios Revision F12d Only or read below)

 

Important Notice

This New EFI Contains a brand new DSDT made for for the Z390 Pro Bios Revision F12d ONLY,

If you dont want to update your bios and I personally recommend you do then replace the new DSDT with your old F11 DSDT and then you can continue using the F11 bios with the new EFIs.


The EFI and DSDT has now been updated to the my latest version.

Changes made include,

New DSDT's For bios revision F12d ONLY

OcQuirks Revision 12

Whatevergreen 1.3.6

Lilu 1.4.1

AppleALC-1.4.5

VirtualSMC 1.10

MemoryAllocation.efi now added to the UEFI driver folder to fix failure to boot because of memory allocation failures at start up 

Clover Updated too Revision 5103

Plus other minor tweaks to the clover config

 

I have also now created a HD630 IGPU only version of the EFI so for all you people out there that have been asking me for this your wish is my command. :)


 

Aorus Z390 Pro Vega Navi VII F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 Vega, Navi (5700, 5700xt), Radeon VII DSDT Installed) SMBios 19,1
Aorus Z390 Pro RX Polaris F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 RX5XX Polaris DSDT Installed) SMBios 19,1

HD630 Z390 Pro F12d EFI.zip Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 HD630 IGPU Only) SMBios 18,1

 

If you prefer using SMBios 1,1 then by all means switch to it but all the old problems of using 19,1 are corrected now with this EFI plus DRM is fully working unless you have a Polaris gpu. Just to add, SMBios 19,1 is the correct one to be using for our chipset and cpu, if you check the spec of a real macpro it is not a using a CoffeeLake CPU or Z3xx chipset. It does work perfectly but correct is correct so 19,1 it is.

 

Please Note, If you use a 5700 or 5700XT then SMBios 1,1 is unstable using the Navi GPUs so please stick to 19,1 with igpu enabled.

 

Latest Gigabyte Z390 PRO BIOS (F12d)

mb_bios_z390-aorus-pro_f12d.zip

 

CFG Unlock (MSR) F12d BIOS Profile - The Easy Way 

@texem Has kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam.

It also has all the bios settings listed on this guide pre done and saved onto the profile.

 

F12d MSR_Unlocked.zip  - Use with Bios Revision F12d ONLY

 

1 - Download the profile and save it to a USB Key

2 - Go into the bios,

3 - Load the profile, 

4 - Save and exit

5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that.

6 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 

7 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked

 

PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. 

I was running F11 Bios and EFI 03.01.2020. My systems with RX80 Nitro+ and i7-9700K / 32MB was working fine but sometimes just rebooted unexpectedly.

 

I followed this upgrade and can confirm that all is working well. My PC seems to be faster. If the unexpected reboots are gone is difficult to say, yet.

 

Thanks.

Share this post


Link to post
Share on other sites
39 minutes ago, Musician66 said:

I was running F11 Bios and EFI 03.01.2020. My systems with RX80 Nitro+ and i7-9700K / 32MB was working fine but sometimes just rebooted unexpectedly.

 

I followed this upgrade and can confirm that all is working well. My PC seems to be faster. If the unexpected reboots are gone is difficult to say, yet.

 

Thanks.


That’s good to hear buddy, 

fingers crossed with your random reboots but if the problem remains get in touch and let’s see if we can’t get to the bottom of the problem for you. :thumbsup_anim:

Otherwise just enjoy pal. 

Share this post


Link to post
Share on other sites

Hey all,

If anybody Fancy’s Testing a new EFI of OpenCore using smbios 19,1 using the new bios F12d then please let me know?

3 or 4 testers would be ideal so just let me know if you would like to be one of them?

 

 

Edited by AudioGod

Share this post


Link to post
Share on other sites
1 minute ago, AudioGod said:

Hey all,

If anybody Fancy’s Testing a new EFI of OpenCore using smbios 19,1 using the new bios F12d then please let me know?

3 or 4 testers would be ideal so just let me know if you would like to be one of them?

 

 

 

I'm in brah, you know :D 

Share this post


Link to post
Share on other sites
On 1/14/2020 at 5:47 PM, hackinhacker said:

 

found few ways to clear the cache but when my system is complete useless how am I supposed to go into the cmd line?  as I mentioned before my previous Mojave is completely destroyed so there is no way I can't go into safe mode or anyother way of going to the command line to clear the cache; unless there is another way to clear the cache other than going to the command line.

 

@AudioGod  I know you're busy but could you please help?  

Share this post


Link to post
Share on other sites
1 minute ago, hackinhacker said:

@AudioGod  I know you're busy but could you please help?  

 

hey bud as soon as I'm free I will give you a message. 

 

Share this post


Link to post
Share on other sites

Alternative EFI - N-D-K Fork of OpenCore 16th January 2020 Use with Bios revision F12d Only

 

Big Thanks to @texem for hes countless hours of hard work and help to bring a fully working version of OpenCore using SMBios 19,1 for you all to try.

We have chosen to use N-D-K's Fork of OpenCore as it works happily alongside windows and has a lot of features and changes that I wish were in the original version of OpenCore,

 

Support on this thread for these EFIs won't be great but @texem and myself will help out where we can. 

 

PLEASE NOTE - All bios settings and guide notes are the same for these EFI's and the SMBios is now set to 19,1

 

N-D-K OpenCore Navi Vega VII F12d EFI.zip - Vega 56/64 Navi (5700/5700XT) & Radeon VII DSDT Bios F12d

N-D-K OpenCore RX Polaris F12d EFI.zip - RX Polaris Series DSDT Bios F12d

 

PlistEdit Pro.zip - PlistEdit Pro (use to edit OpenCore)

 

 

Using PlistEdit Pro add your details by modifying the following 

 

453128831_Screenshot2020-01-16at19_25_01.thumb.png.7a9beac3ccc0096941fc4a0ec07b8248.png

 

PLEASE NOTE - These EFIs are setup to be used with your msr Unlocked so make sure you use the F12d Unlocked Profile but if for any reason you can not unlock MSR then just modify following in the OpenCore config.plist :



249434888_Screenshot2020-01-16at19_26_02.thumb.png.948834bc41d84df577e126ae92c9d773.png

 

 

 

CFG Unlock (MSR) F12d BIOS Profile - The Easy Way 

@texem & @WizeMan Have kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam.

It also has all the bios settings listed on this guide pre done and saved onto the profile.

 

F12d_UNLOCK.zip  - Use with Bios Revision F12d ONLY

 

1 - Download the profile and save it to a USB Key

2 - Go into the bios,

3 - Load the profile, 

4 - Save and exit

5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that.

6 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 

7 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked

 

PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. 

 

 

Latest Gigabyte Z390 PRO BIOS (F12d)

mb_bios_z390-aorus-pro_f12d.zip

 

 

 

NEW Clover Major EFI and DSDT UPDATE, 15th January 2020 (Use With Bios Revision F12d Only or read below)

 

Important Notice

This New EFI Contains a brand new DSDT made for for the Z390 Pro Bios Revision F12d ONLY,

If you dont want to update your bios and I personally recommend you do then replace the new DSDT with your old F11 DSDT and then you can continue using the F11 bios with the new EFIs.


The EFI and DSDT has now been updated to the my latest version.

Changes made include,

New DSDT's For bios revision F12d ONLY

OcQuirks Revision 12

Whatevergreen 1.3.6

Lilu 1.4.1

AppleALC-1.4.5

VirtualSMC 1.10

MemoryAllocation.efi now added to the UEFI driver folder to fix failure to boot because of memory allocation failures at start up 

Clover Updated too Revision 5103

Plus other minor tweaks to the clover config

 

I have also now created a HD630 IGPU only version of the EFI so for all you people out there that have been asking me for this your wish is my command. :)


 

Aorus Z390 Pro Vega Navi VII F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 Vega, Navi (5700, 5700xt), Radeon VII DSDT Installed) SMBios 19,1
Aorus Z390 Pro RX Polaris F12d EFI .zip - Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 RX5XX Polaris DSDT Installed) SMBios 19,1

HD630 Z390 Pro F12d EFI.zip Use with Bios revision F12d Only (15/01/2020 Catalina 10.15.2 HD630 IGPU Only) SMBios 18,1

 

If you prefer using SMBios 1,1 then by all means switch to it but all the old problems of using 19,1 are corrected now with this EFI plus DRM is fully working unless you have a Polaris gpu. Just to add, SMBios 19,1 is the correct one to be using for our chipset and cpu, if you check the spec of a real macpro it is not a using a CoffeeLake CPU or Z3xx chipset. It does work perfectly but correct is correct so 19,1 it is.

 

Please Note, If you use a 5700 or 5700XT then SMBios 1,1 is unstable using the Navi GPUs so please stick to 19,1 with igpu enabled.

 

Edited by AudioGod

Share this post


Link to post
Share on other sites

Just updated to the new clover EFI before upgrading the BIOS to F12d and everything is working fine.

 

The only problem i had is when using the msr bios profile that did not changed anything from the defaults so i had to use the BIOS settings i was using previously with F11.

 

BIOS SETTINGS (Bios Revision F11)
• Enter BIOS → Press F12 → Enter Setup
• Save & Exit → Load Optimized Defaults
 
• Boot -> Windows 8/10 Features -> Win 8/10
• Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
• Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
• Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
• Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
• Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
• Settings -> IO Ports -> Internal Graphics -> Enabled
• Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
• Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
• Settings -> IO Ports -> Aperture Size -> 256MB
• Settings -> IO Ports -> Audio Controller -> Enabled
• Settings -> IO Ports -> Above 4G Decoding -> Enabled
• Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
• Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
• Settings -> Platform Power -> Platform Power Management -> Enabled
• Settings -> Platform Power -> ErP -> Enabled
• Settings -> Platform Power -> RC6(Render Standby) -> Enabled
 
• Save & Exit → Save & Exit Setup 

 

Big thanks!

Edited by stdmje

Share this post


Link to post
Share on other sites
10 minutes ago, stdmje said:

Just updated to the new clover EFI before upgrading the BIOS to F12d and everything is working fine.

 

The only problem i had is when using the msr bios profile that did not changed anything from the defaults so i had to use the BIOS settings i was using previously with F11.

 


BIOS SETTINGS (Bios Revision F11)
• Enter BIOS → Press F12 → Enter Setup
• Save & Exit → Load Optimized Defaults
 
• Boot -> Windows 8/10 Features -> Win 8/10
• Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
• Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
• Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
• Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
• Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
• Settings -> IO Ports -> Internal Graphics -> Enabled
• Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
• Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
• Settings -> IO Ports -> Aperture Size -> 256MB
• Settings -> IO Ports -> Audio Controller -> Enabled
• Settings -> IO Ports -> Above 4G Decoding -> Enabled
• Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
• Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
• Settings -> Platform Power -> Platform Power Management -> Enabled
• Settings -> Platform Power -> ErP -> Enabled
• Settings -> Platform Power -> RC6(Render Standby) -> Enabled
 
• Save & Exit → Save & Exit Setup 

 

Big thanks!

It’s all the Bios same settings as before and if you redownload the F12d bios profile again from the main page or my main update message I posted the profile has been corrected to include all the correct settings. :thumbsup_anim:
 

@stdmje By the way if you don’t want to update the bios then use the older dsdt but whatever do not use the new DSDT on the old bios revision. It had to be rewritten so just to be safe and not mess things up under the hood don’t do that buddy and update the bios or downgrade to the older F11 dsdt.

Edited by AudioGod

Share this post


Link to post
Share on other sites

Tested the latest Clover EFI. Works beautifully. I did have a couple of freezes (stuck on ++++++++) for a couple of reboots initially, but it all cleared up and works just as well as the revision before. Great job :)

 

Running on the latest OC and everything is working, much better than Clover actually. Clover definitely has a better boot screen, but been dying to try OC and I'm loving it so far!

 

So both work great! I do have a very minimal set up, just FYI.

 

Thanks again AG :thumbsup_anim:

 

PS: I got the memory tab back with OC (*_*)

1394060459_ScreenShot2020-01-16at12_09_26PM.thumb.png.047ef07c55751144d6a46ddedc7c28ee.png

 

 

Edited by Tiem

Share this post


Link to post
Share on other sites

Gosh, thank you for l the hard work! Can't wait to try it out.

 

I do wish that we could create a parallel track for those of us with the Pro Wifi version. I always feel left out :cry:

 

Not sure I am brave enough to go full OpenCore after almost 10 years with Clover! I feel like I know it like the back of my hand.

 

Question: I dual boot with Win 10 on a separate SSD, will the newest OpenCore (NDK) not have any issues?

Share this post


Link to post
Share on other sites
36 minutes ago, pkdesign said:

Gosh, thank you for l the hard work! Can't wait to try it out.

 

I do wish that we could create a parallel track for those of us with the Pro Wifi version. I always feel left out :cry:

 

Not sure I am brave enough to go full OpenCore after almost 10 years with Clover! I feel like I know it like the back of my hand.

 

Question: I dual boot with Win 10 on a separate SSD, will the newest OpenCore (NDK) not have any issues?


there’s no difference other then the WiFi on the pro WiFi board, same pcb, same rails, same Vrms, same USB port config it’s all the same (HS14 is even reserved in the Z390 Pro non WiFi that’s how the same they are), even the Dsdt takes it into account so there’s no need to feel left out, only thing I can’t do for you is unlock your MSR but even the bios version is the same...

 

about dual boot, your as safe as houses when it comes to booting into windows using this forked version of OpenCore, it’s the very reason we choose to use it buddy. :thumbsup_anim:

 

Enjoy my friend I hope you like it :) 

Edited by AudioGod

Share this post


Link to post
Share on other sites
2 minutes ago, pkdesign said:

I assume the OpenCore version gets placed in the hidden EFI partition just like Clover?

Do everything you would do as if it was clover EFI placement wise and add your details using plistedit pro , I have examples so you can see where to put your info :) 

Edited by AudioGod

Share this post


Link to post
Share on other sites
11 hours ago, Tiem said:

 

PS: I got the memory tab back with OC (*_*)

 

 

Well look at that, I didn't even notice the memory tab was missing! I just checked, and sure enough it's not there. I know I've seen it before, but may have been when I was on 19,1. Just found this info on another forum:

 

"No RAM tab is the authentic macOS feature if RAM for your MAC(defined SMBIOS) is not upgradable"

Share this post


Link to post
Share on other sites

I'm 99.9% sure it should be there. Not-upgradable typically applies to memory that is soldered to the board (like the Air). And even then it should list it no?

 

In any case, the iMac19,1 has 4 slots and despite being just hard to get to, is actually just regular DDR4. Crucial sells upgrades for it: https://www.crucial.com/usa/en/compatible-upgrade-for/Apple/imac-(retina-5k,-27-inch,-2019)-imac-19,1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fercho3138
      Hi!
      So I've successfully built my rig and installed Mac os
      Gigabyte Aorus Z390 Pro Wifi Intel Core i7 9700k Ballistix Sport 32gb Samsung evo 500gb nv Sapphire Radeon RX 580 Pulse Corsair h60 The thing is that I got it running perfectly, even performed some heavy video renderings with no problem but sometimes it just restarts on its own, sometimes when I'm using Chrome, sometimes when I'm editing or whatever other task. Last time it happened I got the forbidden sign on the screen so I tried to boot up again using the -v flag and I got the "Couldn't allocate runtime area" message, which is very strange because I had no problems in booting up the system after I made my configurations in the config.plist

      Please someone give me some help with this problem, I'm completly stucked!!
      config.plist
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 04/02/2020
      EFI Update - 04/02/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      AG Clover Z390 Master Navi Vega EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      AG Clover Z390 Master Polaris EFI.zip - RX5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (04/02/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (04/02/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By ricardos7
      Boa tarde a todos, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
      Preciso de ajuda para terminar alguns detalhes que nÃo consegui, alguém poderia ajudar?
       
      bem com a minha pasta EFI que pode ser baixada nesse post vc poderá fazer o seu hack mais facilmente nesse modelo,
      pois quase tudo ja esta configurado e pronto pra uso.
       
      ESPECIFICAÇÕES TÉCNICAS
      Processador Intel Core i7 - 6ª Geração Intel Core i7-6500U
      Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
      Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
      Armazenamento Capacidade: 240 GB SSD
      Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
      Webcam integrada de alta definição (720p) com microfone digital
      Gráfico Integrado Intel HD 520
      NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
      Áudio Realteck ALC255

      Dell Wireless 1707 WiFi, chip ar9565
      1x  HDMI 1.4ª
      2x USB 3.0
      1x USB 2.0
      1x Ethernet 10/100 RJ-45
      1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
      Leitor de Cartão
      Tipo: SD, SDHC, SD3.0, MS, MS Pro
      Alimentação Bivolt 3 células 43Wh
       
       
      O QUE NÃO FUNCIONA?
      BRILHO DA TELA
      BLUETOOTH
      SONO (Hibernação)
      HDMI (audio) video funciona mais a tela do note fica preta ao conectar o cabo HDMI
      GRAFICOS DEDICADOS NVIDEA 930M (DESATIVADO)
       
      O QUE FUNCIONA?
       
      GRAFICOS INTEL
      WI-FI - a intel original foi substituída pela DELL dw1707 ar9565
      AUDIO
      TECLADO
      TRACKPAD (com gestos)
      TOUCHSCREEN (com alguns gestos)
      TECLAS  DE ATALHO
      PLACA DE REDE RJ45
      GERENCIAMENTO DE ENERGIA
       
      OBS. PARA DESATIVAR OS GRÁFICOS FOI USANDO UMA SSDT EM CONJUNTO COM A DSDT-5 E 7, DEPOIS DE APLICADO ALGUNS PACHES.
       
      A DSDT E AS SSDT
      PACHS BASICOS APLICADOS.
      Aparentemente o gerenciamento de energia está funcionando bem, pelo menos o processador parece esta bem estável.
       

       
      PASTA OTHER CLOVER (DEPOIS DESSA IMAGEM FOI ADICIONADO MAIS DUAS KEXT QUE NAO ESTAO PRESENTES NA IMAGEM, PARA FUNCIONAR
      O TOUCH E PARA O WIFI CONSEGUIR ENCONTRAR AS REDES.
       

       
      EFI 
       

       
       
       
       
      ESTAREI DEIXANDO UM LINK PARA DOWNLOAD DA MINHA PASTA EFI, CASO ALGUEM ESTEJA FAZENDO ESSE MESMO HACK ESSA PASTA PODERÁ AJUDAR.
       
      ATENÇÃO
       
      LEMBRANDO QUE OS ARQUIVOS DSDT E SSDT, SSDT DE 5 A 8 SÃO DO MEU NOTEBOOK, QUEM FOR USAR DEVER EXTRAIR E CONSTRUIR SEUS PRÓPRIOS DSDT E SSDT.
      O SSDT-EC E O SSDT-PNLF PODEM SER USADOS POIS SÃO GENERICOS.
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F PARA COLOCAR NO PENDRIVER DE INSTALAÇÃO.
      https://drive.google.com/open?id=1nPM2CNgpr7cwOkjwj7UReziqrh9xjtf1
      SE NAO SUBIR COM A Config.plist INICIAL SELECIONE A Config2.plist
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (EM USO) 14/02/2020
      https://drive.google.com/open?id=1US7j-YlufrFTasLihmUZwElyV4jBfHDg
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (ANTIGA)
      https://drive.google.com/open?id=1Q2tnoqQZ9K44Bv6k2k1yauaHCAop_ZyW
       
      QUEM PUDER AJUDAR A CORRIGIR OS PROBLEMAS RESTANTE EU AGRADEÇO, OBRIGADO.
       
       

    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
×