Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

1,834 posts in this topic

Recommended Posts

On 8/22/2019 at 3:58 AM, AudioGod said:

19,1 Aorus Z390 Pro RX Polaris EFI.zip - Use with Bios revision F11 Only (03/01/2020 Catalina 10.15.2 RX5XX Polaris DSDT Installed) SMBios 19,1

Hi @AudioGod I've use your EFI for my hackintosh, everything is perfect thank you so much but I have issues when im editing 1080P project on FCPX, it's hang sometimes & trim tool lag, netflix not working. My hackintosh spec:

OS 10.15.2

Gigabyte Aorus Pro Wifi

i5 9600K 

16GB RAM Corsair 

SSD 512 NVMe 

Sorry for my English, Pls help thank you 

 

Edited by carter1810

Share this post


Link to post
Share on other sites
Advertisement
On 1/11/2020 at 3:48 PM, AudioGod said:


no problem buddy, whenever you get around to it just let me know.

could also be clover so update it only selecting the first two options On a custom install when doing so.

il screenshot it when I’m on my hack next to show you. :) 

 

Good morning @AudioGod 

 

I dropped the MemoryAllocation efi file, Cleared NVRAM and configured BIOS again, reboot, and I was getting KPs.

 

Then I restored it, cleared NVRAM and reboot. I am running the Hackintosh for about 2 hours no bluetooth issues yet EXCEPT that now I cannot enable the Unlock with Apple Watch (it is loading and then fails) and Continuity does not work (e.g. When opening a link on Safari on my iPad or iPhone the Continuity Safari icon does not appear on the dock).

 

This is very weird.

Edited by WizeMan

Share this post


Link to post
Share on other sites
1 hour ago, WizeMan said:

 

Good morning @AudioGod 

 

I dropped the MemoryAllocation efi file, Cleared NVRAM and configured BIOS again, reboot, and I was getting KPs.

 

Then I restored it, cleared NVRAM and reboot. I am running the Hackintosh for about 2 hours no bluetooth issues yet EXCEPT that now I cannot enable the Unlock with Apple Watch (it is loading and then fails) and Continuity does not work (e.g. When opening a link on Safari on my iPad or iPhone the Continuity Safari icon does not appear on the dock).

 

This is very weird.


How totally weird that MemoryAllocation is effecting your combo card.

i have no such problems on mine and your the first report of anything like this, hmmmmm

Have you tried using or not using airportfixup and see if it helps?

 

also On a different note I have never once managed to get my watch to unlock my hack and I’ve tried everything to make it work, that’s a no go for me.

 

sign out of your iCloud and back in to it and that should kick back in everything.


 

 

Edited by AudioGod

Share this post


Link to post
Share on other sites
5 minutes ago, AudioGod said:


How totally weird that MemoryAllocation is effecting your combo card.

i have no such problems on mine and your the first report of anything like this, hmmmmm

Have you tried using or not using airportfixup and see if it helps?

 

also On a different note I have never once managed to get my watch to unlock my hack and I’ve tried everything to make it work, that’s a no go for me.

 

sign out of your iCloud and back in to it and that should kick back in everything.


 

 

 

I 've tried Signing in and out of iCloud for Continuity Fixing but with no result :\ AirDrop works fine though. iMessage and Message forwarding also works. It's just continuity and Unlock with Apple Watch.

 

I will try again removing AirportFixup and let you know. I know that Apple Watch unlocking is junky generally with Original Macs too (was working half the times with my MBP) but the Continuity thing is very weird!

 

P.S. I like your new Avatar :D 

Share this post


Link to post
Share on other sites
4 minutes ago, WizeMan said:

 

I 've tried Signing in and out of iCloud for Continuity Fixing but with no result :\ AirDrop works fine though. iMessage and Message forwarding also works. It's just continuity and Unlock with Apple Watch.

 

I will try again removing AirportFixup and let you know. I know that Apple Watch unlocking is junky generally with Original Macs too (was working half the times with my MBP) but the Continuity thing is very weird!

 

P.S. I like your new Avatar :D 


Thank you but She’s no Avatar, She’s my very naughty Cat :hysterical:

I would love my watch to unlock my hack but computer says no every time and yup it’s totally hit and miss on a real Mac too but I would still love it to work for me.

My combo card is ripped straight out of a real MacBook as well so it should work but still computer says no.


I was referring to MemoryAllocation and airportfixup bro, that Efi is a major lifeline for hack stability so if we can find the root of the cause and be able to keep MemoryAllocation.efi in your system that would be ideal for you.

Share this post


Link to post
Share on other sites
8 minutes ago, AudioGod said:


Thank you but She’s no Avatar, She’s my very naughty Cat :hysterical:

I would love my watch to unlock my hack but computer says no every time and yup it’s totally hit and miss on a real Mac too but I would still love it to work for me.

My combo card is ripped straight out of a real MacBook as well so it should work but still computer says no.


I was referring to MemoryAllocation and airportfixup bro, that Efi is a major lifeline for hack stability so if we can find the root of the cause and be able to keep MemoryAllocation.efi in your system that would be ideal for you.

 

I think that MemoryAllocation efi was (is) not the cause for the Bluetooth Issues. I completely cleared NVRAM this morning, loaded it again and it seems to be working A+ for about 4 hours now. By A-A I mean mouse and keyboard not disconnecting, as it did the previous days. Although I removed the battery from the motherboard the previous days to clear my NVRAM maybe it did not clear thus having the disconnection issues... what can I say, hacks are a mystery for me :D

 

I removed the BcrmAirPortFixup kext from the EFI and rebooted just now. Will try to see if I can make Continuity Work again, then try to troubleshoot the Apple Watch Unlock. I had it working with your previous EFIs, it will be a pity to lose that functionality, I love it. :D I also had an issue with the bluetooth header cable when I replaced the RX 580 with the Vega, the quality was very bad and the red thin cable was cut from the small connector that goes to the card and I had to solder it. MAYBE the solder is not good, and since I live in a rural area in Greece where there are no electronics stores I am waiting for a free replacement from Fenvi (their support is out of this world) so if I do not resolve now and this is the problem it may be fixed when I change cable.

 

I like your very naughty cat then! :cat:

 

Edited by WizeMan

Share this post


Link to post
Share on other sites
5 minutes ago, WizeMan said:

 

I think that MemoryAllocation efi was (is) not the cause for the Bluetooth Issues. I completely cleared NVRAM this morning, loaded it again and it seems to be working A+ for about 4 hours now. By A-A I mean mouse and keyboard not disconnecting, as it did the previous days. Although I removed the battery from the motherboard the previous days to clear my NVRAM maybe it did not clear thus having the disconnection issues... what can I say, hacks are a mystery for me :D

 

I removed the BcrmAirPortFixup kext from the EFI and rebooted just now. Will try to see if I can make Continuity Work again, then try to troubleshoot the Apple Watch Unlock. I had it working with your previous EFIs, it will be a pity to lose that functionality, I love it. :D

 

I like your very naughty cat then! :cat:

 


I think you getting the watch to work was a fluke....I really hope I’m wrong though and you come back saying hey Audio try this and I do and it works for me. I would be so freaking happy lol

i gave up trying on mine ages ago, I never once managed to get it to work. Everything else to do with the watch like allowing app installs via the watch and anything else is perfect it’s just unlock. ,no EFI of mine has ever worked for me :(  

Edited by AudioGod

Share this post


Link to post
Share on other sites
1 hour ago, AudioGod said:


I think you getting the watch to work for a fluke....I really hope I’m wrong though and you come back saying hey Audio try this and I do and it works for me. I would be freaking so happy lol

i gave up trying on mine ages ago, I never once managed to get it to work. Everything else to do with the watch like allowing app installs via the watch and anything else is perfect it’s just unlock. ,no EFI of mine has ever worked for me :(  

 

So you are able to activate the checkbox but unlock does not work for you. Just approve actions within apps. I was able to unlock the hack and approve. But now it does not activate at all. It gets stuck on this state: "Turning on..." for a couple of minutes then it is just deselected by itself.

 

Screenshot 2020-01-13 at 12.40.03 PM.png

 

UPDATE 1: So I removed the fix up kext and rebooted, nothing, handoff not working 

 

UPDATE 2: So signing out from iCloud and then back in on my iPad seems to have fixed the Handoff - Continuity issue. Now both iPhone and iPad are reporting to Continuity on the Hack's Safari (that's my super legit test lol)

 

Unlock with watch still not working. I think I am going to re-pair the watch and try again.
 

UPDATE 3: Bluetooth DisconnectoGATE returned. I do not know if it is related to removing Airport Fixup, so I put it back in the EFI. I do not know whether this is the reason or not. I connected my USB mouse and run Bluetooth Explorer which gave me some errors that I think they are related to USB. Can you have a look at the image @AudioGod?

 

A9919644-885E-4340-A2DD-9B643B4D3C2C.jpeg.017874cf1e19b8571da0f132a5b63167.jpeg

 

I am beginning to think that there could be two possible causes:

 

1. The cable solder is not good

2. The Vega is drawing too much energy and my poor CX650 cannot handle.

Edited by WizeMan

Share this post


Link to post
Share on other sites

@AudioGod

im the one who wanted to active hs14 for aorus pro wifi if you can remember me 

anyway i got it enable by using injectall usb kext 

everything works well my Bluetooth speaker works well thank you .

know i have 2 issues 

1st one i boot my hackintosh with internal gpu and using this flag nv_disable=1 to disable my rtx 2070 

the problem is the rtx 2070 fans not spinning at all while using macos and if i put my hand on its palt it is hotter than normal 

i dont know how to make the fans working while using macos 

 

2nd problem 

you advice me to patch my monitor edid because i told you when my macos wake the screen became green 

i patched it using the link you provide me yesterday and i can confirm it is patched as should be 

but now my problem become :

when i put the macos to sleep 

my ram rgb still lighting 

and if i press any key to wake the pc the monitor become black with a mouse arrow for 30 seconds i can move it and after that the arrow gone and the macos freezes .

my ram corsair vengeance pro rgb 3000mhz

Share this post


Link to post
Share on other sites

@WizeMan ops, yes put airportfixup right back in there.....lol

 

12 minutes ago, mazagngy said:

@AudioGod

im the one who wanted to active hs14 for aorus pro wifi if you can remember me 

anyway i got it enable by using injectall usb kext 

everything works well my Bluetooth speaker works well thank you .

know i have 2 issues 

1st one i boot my hackintosh with internal gpu and using this flag nv_disable=1 to disable my rtx 2070 

the problem is the rtx 2070 fans not spinning at all while using macos and if i put my hand on its palt it is hotter than normal 

i dont know how to make the fans working while using macos 

 

2nd problem 

you advice me to patch my monitor edid because i told you when my macos wake the screen became green 

i patched it using the link you provide me yesterday and i can confirm it is patched as should be 

but now my problem become :

when i put the macos to sleep 

my ram rgb still lighting 

and if i press any key to wake the pc the monitor become black with a mouse arrow for 30 seconds i can move it and after that the arrow gone and the macos freezes .

my ram corsair vengeance pro rgb 3000mhz


you can not use injectall usb kext with my EFI as it doesn’t work that way. The dsdt and ssdt make usb work so what you have done is double patched the usb and probably the cause of your new problem.

somebody posted how to enable HS14 via clover for you the other day, try it that way. It’s somewhere posted on here hiding.

Share this post


Link to post
Share on other sites
9 minutes ago, AudioGod said:

@WizeMan Updated EFI with all kexts (WEG & Lilu are no longer Beta), Oc Quirks and Clover Updated.

 

Please Test for me and let me know if its ok?

Wizeman EFI.zip

 

 :startreck:

 

Loaded it on my Testing USB Stick and booted off it. Will let you know in a couple or more hours, because the BT thing is very random from what I experience :\ Thank you!

 

(P.S. I have the suspicion that unchecking KernelPM may have something to do with the Bluetooth Issues. I haven't unchecked it now. Will test like this for 3-4 hours then uncheck it and test again. I am using the Unlock CFG profile -> Loaded the Profile on the first post -> Made the changes you recommended with the first ocQuirks EFI -> Saved on a second profile and this is the one I am currently using whenever I clear the NVRAM)

 

:guitar:

Edited by WizeMan

Share this post


Link to post
Share on other sites
1 hour ago, WizeMan said:

 

Loaded it on my Testing USB Stick and booted off it. Will let you know in a couple or more hours, because the BT thing is very random from what I experience :\ Thank you!

 

(P.S. I have the suspicion that unchecking KernelPM may have something to do with the Bluetooth Issues. I haven't unchecked it now. Will test like this for 3-4 hours then uncheck it and test again. I am using the Unlock CFG profile -> Loaded the Profile on the first post -> Made the changes you recommended with the first ocQuirks EFI -> Saved on a second profile and this is the one I am currently using whenever I clear the NVRAM)

 

:guitar:

Thanks buddy,

The New EFI is not for your Bluetooth issue but more a update test because of all the new kexts In there. I’m gonna update the thread again with this EFI as long as you tell me it’s good to go. :chef:
 

you don’t need to clear the bios anymore using the new EFI posted From a few days ago and the one I sent to test.

are you using the one I sent you as is and no changes other then your info?

Oc quirks is the latest version and very stable so use it.

let me know please pal and thanks for trying for me. 
 

by the way kernalPM won’t have anything to do with it, you need it checked if you don’t have MSR unlocked and unchecked if you do. Having it checked will just make clover work like it had a locked MSR again.

 

@WizeMan Thinking about your Bluetooth problem. can you try disabling above 4g in the bios as well and see if it helps?

Edited by AudioGod

Share this post


Link to post
Share on other sites

Hi @AudioGod my Bluetooth is working fine, but when I wake up from sleep I need to replug-it to get connection. Any clue about that?

Also, for all the other stuff I need to purchase a wifi combo really? or maybe in a future the community could support the 390 Aorus pro wifi adapter?

Best regards.

Share this post


Link to post
Share on other sites
28 minutes ago, AudioGod said:

Thanks buddy,

The New EFI is not for your Bluetooth issue but more a update test because of all the new kexts In there. I’m gonna update the thread again with this EFI as long as you tell me it’s good to go. :chef:
 

you don’t need to clear the bios anymore using the new EFI posted From a few days ago and the one I sent to test.

are you using the one I sent you as is and no changes other then your info?

Oc quirks is the latest version and very stable so use it.let me know please pal and thanks for trying for me. 

 

@WizeMan Thinking about your Bluetooth problem. can you try disabling above 4g in the bios as well and see if it helps?


I am running your new EFI for about an hour (only changed my serial number etc, left KernelPM checked as it was), seems to be working great, heavy Xcode work with simulation as  well as Android studio work with simulation, Photoshop, Apple Music Playing. No issues whatsoever.

Share this post


Link to post
Share on other sites
2 minutes ago, c1ru said:

Hi @AudioGod my Bluetooth is working fine, but when I wake up from sleep I need to replug-it to get connection. Any clue about that?

Also, for all the other stuff I need to purchase a wifi combo really? or maybe in a future the community could support the 390 Aorus pro wifi adapter?

Best regards.


the WiFi on the pro is not supported and forcing it work will never work properly and your always run into problems. This is why I’m so firm about using a fully supported card only.

Share this post


Link to post
Share on other sites
36 minutes ago, AudioGod said:

by the way kernalPM won’t have anything to do with it, you need it checked if you don’t have MSR unlocked and unchecked if you do. Having it checked will just make clover work like it had a locked MSR again.

 

@WizeMan Thinking about your Bluetooth problem. can you try disabling above 4g in the bios as well and see if it helps?

 

It is very weird, right after I wrote  my previous answer I disabled KernelPM and reboot. Bluetooth started acting weird again and after 5 minutes devices disconnected. I will try disabling above 4g and let you know.

Share this post


Link to post
Share on other sites
7 minutes ago, WizeMan said:


I am running your new EFI for about an hour (only changed my serial number etc, left KernelPM checked as it was), seems to be working great, heavy Xcode work with simulation as  well as Android studio work with simulation, Photoshop, Apple Music Playing. No issues whatsoever.


I Have a funny feeling it was clover causing your issues, it updated it super fast cos an error so maybe it’s connected.

uncheck kernel pm if your MSR un unlocked please brother :) 

3 minutes ago, WizeMan said:

 

It is very weird, right after I wrote  my previous answer I disabled KernelPM and reboot. Bluetooth started acting weird again and after 5 minutes devices disconnected. I will try disabling above 4g and let you know.


Yes do disable with Kernal PM unchecked.

its giving me good information this :) 

 

if you get the same effect with above 4g disabled then try loading bios defaults and manually enter the bios settings again keeping MSR locked and kernal PM Checked.

Edited by AudioGod

Share this post


Link to post
Share on other sites
19 minutes ago, AudioGod said:


I Have a funny feeling it was clover causing your issues, it updated it super fast cos an error so maybe it’s connected.

uncheck kernel pm if your MSR un unlocked please brother :) 


Yes do disable with Kernal PM unchecked.

its giving me good information this :) 

 

if you get the same effect with above 4g disabled then try loading bios defaults and manually enter the bios settings again keeping MSR locked and kernal PM Checked.

 

So I disabled Above 4G and kept KernelPM unchecked. Issue remains. Once I boot on MacOS after 2 mins bluetooth devices disconnected.

 

I guess there is no other choice but to keep it checked. Other than this issue that appears to be happening only to me :D the EFI is  rock solid, mate!

Share this post


Link to post
Share on other sites
Just now, WizeMan said:

 

So I disabled Above 4G and kept KernelPM unchecked. Issue remains. Once I boot on MacOS after 2 mins bluetooth devices disconnected.

 

I guess there is no other choice but to keep it checked. Other than this issue that appears to be happening only to me :D the EFI is  rock solid, mate!

 

did you reset the bios so your MSR is locked again? if you didn't can you do so and let me know if it remains stable?

is your watch working again?

Share this post


Link to post
Share on other sites
1 minute ago, AudioGod said:

 

did you reset the bios so your MSR is locked again? if you didn't can you do so and let me know if it remains stable?

is your watch working again?

 

I will reset the BIOS and follow the BIOS guide on the First Post (I think you have merged the BIOS settings from the initial guide together with the ocQuirks EFI, or do I need to check both posts?

 

Regarding the Apple Watch, the checkbox is not being enabled. Once I settle with the tests we've been performing I will try to re-pair it and let you know of the results.

Share this post


Link to post
Share on other sites
Just now, WizeMan said:

 

I will reset the BIOS and follow the BIOS guide on the First Post (I think you have merged the BIOS settings from the initial guide together with the ocQuirks EFI, or do I need to check both posts?

 

Regarding the Apple Watch, the checkbox is not being enabled. Once I settle with the tests we've been performing I will try to re-pair it and let you know of the results.

my guide settings are all correct and up to date.

Share this post


Link to post
Share on other sites

@AudioGod I reset BIOS settings, entered them manually. Kept KernelPM checked. So far so good with Bluetooth.

Edited by WizeMan

Share this post


Link to post
Share on other sites
2 minutes ago, WizeMan said:

@AudioGod I reset BIOS settings, entered them manually. Kept KernelPM checked. So far so good with Bluetooth.


so if it is CFG unlocked effecting your combo card that’s great cos it’s a nothing fix for you but also very strange that something like that would effect the combo cards bios and make it work flaky.

interesting though, here’s hoping it stays solid for you. :thumbsup_anim:

 

tbh the whole reason I started using the MSR unlocked was to combat memory allocation errors at startup but now that’s fixed via the new drivers having your MSR unlocked is not really needed. It’s still how a real Mac is though. Let’s see if there’s anybody else out there it’s happening to or if it’s exclusive to you and your combo card.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fercho3138
      Hi!
      So I've successfully built my rig and installed Mac os
      Gigabyte Aorus Z390 Pro Wifi Intel Core i7 9700k Ballistix Sport 32gb Samsung evo 500gb nv Sapphire Radeon RX 580 Pulse Corsair h60 The thing is that I got it running perfectly, even performed some heavy video renderings with no problem but sometimes it just restarts on its own, sometimes when I'm using Chrome, sometimes when I'm editing or whatever other task. Last time it happened I got the forbidden sign on the screen so I tried to boot up again using the -v flag and I got the "Couldn't allocate runtime area" message, which is very strange because I had no problems in booting up the system after I made my configurations in the config.plist

      Please someone give me some help with this problem, I'm completly stucked!!
      config.plist
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 04/02/2020
      EFI Update - 04/02/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      AG Clover Z390 Master Navi Vega EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      AG Clover Z390 Master Polaris EFI.zip - RX5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (04/02/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (04/02/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By ricardos7
      Boa tarde a todos, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
      Preciso de ajuda para terminar alguns detalhes que nÃo consegui, alguém poderia ajudar?
       
      bem com a minha pasta EFI que pode ser baixada nesse post vc poderá fazer o seu hack mais facilmente nesse modelo,
      pois quase tudo ja esta configurado e pronto pra uso.
       
      ESPECIFICAÇÕES TÉCNICAS
      Processador Intel Core i7 - 6ª Geração Intel Core i7-6500U
      Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
      Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
      Armazenamento Capacidade: 240 GB SSD
      Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
      Webcam integrada de alta definição (720p) com microfone digital
      Gráfico Integrado Intel HD 520
      NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
      Áudio Realteck ALC255

      Dell Wireless 1707 WiFi, chip ar9565
      1x  HDMI 1.4ª
      2x USB 3.0
      1x USB 2.0
      1x Ethernet 10/100 RJ-45
      1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
      Leitor de Cartão
      Tipo: SD, SDHC, SD3.0, MS, MS Pro
      Alimentação Bivolt 3 células 43Wh
       
       
      O QUE NÃO FUNCIONA?
      BRILHO DA TELA
      BLUETOOTH
      SONO (Hibernação)
      HDMI (audio) video funciona mais a tela do note fica preta ao conectar o cabo HDMI
      GRAFICOS DEDICADOS NVIDEA 930M (DESATIVADO)
       
      O QUE FUNCIONA?
       
      GRAFICOS INTEL
      WI-FI - a intel original foi substituída pela DELL dw1707 ar9565
      AUDIO
      TECLADO
      TRACKPAD (com gestos)
      TOUCHSCREEN (com alguns gestos)
      TECLAS  DE ATALHO
      PLACA DE REDE RJ45
      GERENCIAMENTO DE ENERGIA
       
      OBS. PARA DESATIVAR OS GRÁFICOS FOI USANDO UMA SSDT EM CONJUNTO COM A DSDT-5 E 7, DEPOIS DE APLICADO ALGUNS PACHES.
       
      A DSDT E AS SSDT
      PACHS BASICOS APLICADOS.
      Aparentemente o gerenciamento de energia está funcionando bem, pelo menos o processador parece esta bem estável.
       

       
      PASTA OTHER CLOVER (DEPOIS DESSA IMAGEM FOI ADICIONADO MAIS DUAS KEXT QUE NAO ESTAO PRESENTES NA IMAGEM, PARA FUNCIONAR
      O TOUCH E PARA O WIFI CONSEGUIR ENCONTRAR AS REDES.
       

       
      EFI 
       

       
       
       
       
      ESTAREI DEIXANDO UM LINK PARA DOWNLOAD DA MINHA PASTA EFI, CASO ALGUEM ESTEJA FAZENDO ESSE MESMO HACK ESSA PASTA PODERÁ AJUDAR.
       
      ATENÇÃO
       
      LEMBRANDO QUE OS ARQUIVOS DSDT E SSDT, SSDT DE 5 A 8 SÃO DO MEU NOTEBOOK, QUEM FOR USAR DEVER EXTRAIR E CONSTRUIR SEUS PRÓPRIOS DSDT E SSDT.
      O SSDT-EC E O SSDT-PNLF PODEM SER USADOS POIS SÃO GENERICOS.
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F PARA COLOCAR NO PENDRIVER DE INSTALAÇÃO.
      https://drive.google.com/open?id=1nPM2CNgpr7cwOkjwj7UReziqrh9xjtf1
      SE NAO SUBIR COM A Config.plist INICIAL SELECIONE A Config2.plist
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (EM USO) 14/02/2020
      https://drive.google.com/open?id=1US7j-YlufrFTasLihmUZwElyV4jBfHDg
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (ANTIGA)
      https://drive.google.com/open?id=1Q2tnoqQZ9K44Bv6k2k1yauaHCAop_ZyW
       
      QUEM PUDER AJUDAR A CORRIGIR OS PROBLEMAS RESTANTE EU AGRADEÇO, OBRIGADO.
       
       

    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
×