Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

1,769 posts in this topic

Recommended Posts

15 hours ago, AudioGod said:


@WizeMan try the latest EFI again but this time replace OcQuirks and runtimeservices with the files below, restart and try again.

That should fix it for you. Fingers crossed.

 

OcQuirks R12.zip


One other thing bud, when you update clover make sure you don’t update any of the .efi drivers.

 

@AudioGod I did all this and unfortunately it did not help. Not 5 minutes since I booted my bluetooth devices (mouse & keyboard) disconnected. Had to connect a usb mouse to restart the computer.

Edited by WizeMan

Share this post


Link to post
Share on other sites
Advertisement

Thank you @AudioGod for your help!

I have Z390 I Aorus pro wifi working awesome with your EFI, and with the patch also sleep.

What should i do right now to test? Do you tell me in the other thread isn´t required to do a USBMap, i have all ports working yes. The only thing is that take near a 40seconds to get to desktop, but got bluetooth with Belkin, and sound, ethernet... and so fast!

Captura de pantalla 2020-01-11 a las 9.16.26.png

Captura de pantalla 2020-01-11 a las 9.14.49.png

Share this post


Link to post
Share on other sites
1 hour ago, c1ru said:

Thank you @AudioGod for your help!

I have Z390 I Aorus pro wifi working awesome with your EFI, and with the patch also sleep.

What should i do right now to test? Do you tell me in the other thread isn´t required to do a USBMap, i have all ports working yes. The only thing is that take near a 40seconds to get to desktop, but got bluetooth with Belkin, and sound, ethernet... and so fast!

Captura de pantalla 2020-01-11 a las 9.16.26.png

Captura de pantalla 2020-01-11 a las 9.14.49.png

I have the same motherboard and im using this efi 19,1 Aorus Z390 Pro RX Polaris EFI.zip 3/1/2020

i cant get Bluetooth to work 

and im using igpu uhd 630 because my gpu is rtx 2070 

my issue is when i press sleep from apple menu it take a minute to sleep and when i press anything to wake the pc the screen become green and mouse arrow i can move it nothing else i must restart it to work properly .

can you or anyone else to make the internal Bluetooth working and fixing my sleep/wake issue please 

 

just for more details 

my setup 

z390 aorus pro wifi bios f11

bios setting like OP but booting using internal gpu 

mac on samsung ssd 860

win on nvme samsung 1tb

Gpu rtx 2070

 

i used Hackintool to buffer patch my uhd 630 to make it fully working 

nothing else modified 

i used older efi from this op while setup 10.15 and my Bluetooth worked without any problems but with last efi it doesn’t and i don’t remember the old efi i used 

now im on 10.15.2 and i my issue like i said before up

sorry for my English and hope someone help me thanks

Edited by mazagngy

Share this post


Link to post
Share on other sites
3 hours ago, WizeMan said:

 

@AudioGod I did all this and unfortunately it did not help. Not 5 minutes since I booted my bluetooth devices (mouse & keyboard) disconnected. Had to connect a usb mouse to restart the computer.


im really a bit baffled bro because I haven’t touched anything to do with that side of the EFI so it should be working as per normal. Could you try dropping memoryallocation.efi in the drivers for me please so I can see if that’s the cause for you?

most people are happy and working but there are 3 of you that ain’t. Here’s the thing though one is fixed because he needed a fresh boot, the second is unrelated to your problem and I think we have to the bottom of it so I’m miffed over this one.

lets see if we can find the root of the problem.

 

46 minutes ago, mazagngy said:

I have the same motherboard and im using this efi 19,1 Aorus Z390 Pro RX Polaris EFI.zip 3/1/2020

i cant get Bluetooth to work 

and im using igpu uhd 630 because my gpu is rtx 2070 

my issue is when i press sleep from apple menu it take a minute to sleep and when i press anything to wake the pc the screen become green and mouse arrow i can move it nothing else i must restart it to work properly .

can you or anyone else to make the internal Bluetooth working and fixing my sleep/wake issue please 

 

just for more details 

my setup 

z390 aorus pro wifi bios f11

bios setting like OP but booting using internal gpu 

mac on samsung ssd 860

win on nvme samsung 1tb

Gpu rtx 2070

 

i used Hackintool to buffer patch my uhd 630 to make it fully working 

nothing else modified 

i used older efi from this op while setup 10.15 and my Bluetooth worked without any problems but with last efi it doesn’t and i don’t remember the old efi i used 

now im on 10.15.2 and i my issue like i said before up

sorry for my English and hope someone help me thanks


what Bluetooth and WiFi combo card are you trying to use?

if your trying to use the pros built in Bluetooth then forget it as it’s totally incompatible.

disable via the bios and buy yourself a recommended pcie WiFi/Bluetooth combo.

if it’s taking to long to boot then you might of done the hd630 patching wrong so double check it buddy.


the green screen is a separate problem where Catalina is attempting to send the wrong colour mode to your monitor. This happens mostly with dell screens but can happen to other makes too,

the fix is to force RGB to the screen.

heres a link to a guide for fixing it pal.. :thumbsup_anim:

 

https://spin.atomicobject.com/2018/08/24/macbook-pro-external-monitor-display-problem/

 

 

 

 

 

 

Edited by AudioGod

Share this post


Link to post
Share on other sites
3 minutes ago, AudioGod said:


im really a bit baffled bro because I haven’t touched anything to do with that side of the EFI so it should be working as per normal. Could you try dropping memoryallocation.efi in the drivers for me please so I can see if that’s the cause for you?

most people are happy and working but there are 3 of you that ain’t. Here’s the thing though one is fixed because he needed a fresh boot, the second is unrelated to your problem and I think we have to the bottom of it so I’m miffed over this one.

lets see if we can find the root of the problem.


Dropping as in deleting? I tried that before I revert to Dec 17 EFI but wasn’t able to load macOS. I will try again though, by resetting NVRAM first and I’ll let you know.

Share this post


Link to post
Share on other sites
4 minutes ago, WizeMan said:


Dropping as in deleting? I tried that before I revert to Dec 17 EFI but wasn’t able to load macOS. I will try again though, by resetting NVRAM first and I’ll let you know.

Yes drop as in delete it out of the EFI as a test.

im just trying to track down the cause.

Share this post


Link to post
Share on other sites
14 minutes ago, AudioGod said:


im really a bit baffled bro because I haven’t touched anything to do with that side of the EFI so it should be working as per normal. Could you try dropping memoryallocation.efi in the drivers for me please so I can see if that’s the cause for you?

most people are happy and working but there are 3 of you that ain’t. Here’s the thing though one is fixed because he needed a fresh boot, the second is unrelated to your problem and I think we have to the bottom of it so I’m miffed over this one.

lets see if we can find the root of the problem.

 


what Bluetooth and WiFi combo card are you trying to use?

if your trying to use the pros built in Bluetooth then forget it as it’s totally incompatible.

disable via the bios and buy yourself a recommended pcie WiFi/Bluetooth combo.

if it’s taking to long to boot then you might of done the hd630 patching wrong so double check it buddy.


the green screen is a separate problem where Catalina is attempting to send the wrong colour mode to your monitor. This happens mostly with dell screens but can happen to other makes too,

the fix is to force RGB to the screen.

heres a link to a guide for fixing it pal.. :thumbsup_anim:

 

https://spin.atomicobject.com/2018/08/24/macbook-pro-external-monitor-display-problem/

 

 

 

 

 

 

Thank you for fast reply 

i used pros Bluetooth while using 10.15 with older efi from this thread and it worked without any issues 

i saw a tut how to make it work but it said i must enable hs14 and i dont know how .

 

My system boot up in 10 sec thanks to your efi 

i dont have any problem with uhd 630 

i used a preset for aorus master In Hackintool and its work but in about this mac it said 

intel uhd 630 mobile i dont know if this ok or not .

and is that ok it take a minute to go to sleep 

and by the way i cant make it sleep or shutdown by pressing power bottom 

 

for the green screen i will follow ur link 

thanks for your kind 

Share this post


Link to post
Share on other sites
38 minutes ago, mazagngy said:

Thank you for fast reply 

i used pros Bluetooth while using 10.15 with older efi from this thread and it worked without any issues 

i saw a tut how to make it work but it said i must enable hs14 and i dont know how .

 

My system boot up in 10 sec thanks to your efi 

i dont have any problem with uhd 630 

i used a preset for aorus master In Hackintool and its work but in about this mac it said 

intel uhd 630 mobile i dont know if this ok or not .

and is that ok it take a minute to go to sleep 

and by the way i cant make it sleep or shutdown by pressing power bottom 

 

for the green screen i will follow ur link 

thanks for your kind 


don’t use the masters Bluetooth and WiFi card bro, get a new pcie one, where you might h able to get it to work it’s still gonna cause problems for you.

 

@mazagngy are you using the EFI from this thread or my Z390 Master thread?

if you using the EFI from here then start again using my Z390 Master EFI that you can find on my Z390 Master thread here.

 

 

 

Edited by AudioGod

Share this post


Link to post
Share on other sites
47 minutes ago, AudioGod said:


don’t use the masters Bluetooth and WiFi card bro, get a new pcie one, where you might h able to get it to work it’s still gonna cause problems for you.

 

@mazagngy are you using the EFI from this thread or my Z390 Master thread?

if you using the EFI from here then start again using my Z390 Master EFI that you can find on my Z390 Master thread here.

 

 

 

 

Im using all our setup and works awesome, but I have a question, what can I do to enter in bios? after boot my machine I see the logo and nothing more until reach the desktop login.

Also if I press f2 to enter in bios I see black screen.

The only issue is when wakeup from sleep I need to replug my welkin usb to get bluetooth working again.

Also, can I delete all of this patch below than 10.15?

 

Captura de pantalla 2020-01-11 a las 13.04.25.png

Edited by c1ru

Share this post


Link to post
Share on other sites
37 minutes ago, AudioGod said:


don’t use the masters Bluetooth and WiFi card bro, get a new pcie one, where you might h able to get it to work it’s still gonna cause problems for you.

 

@mazagngy are you using the EFI from this thread or my Z390 Master thread?

if you using the EFI from here then start again using my Z390 Master EFI that you can find on my Z390 Master thread here.

 

 

 

I dont need wifi to work 

i just need the Bluetooth and it worked before with 10.15 without problems using your your old efi (i dont know which one) and i see no need for buy a pci wifi/bt just for working bt if the built in one worked without problem 

I follow this thread

https://www.tonymacx86.com/threads/designare-z390-intel-cnvi-9560-bluetooth-partial-success.278116/

but i dont know how to enable HS14 this is all i need 
so please tell me how to enable hs14 or if u can give me ssdt with hs14 enabled 

and my motherboard is z390 aorus pro wifi not master

Share this post


Link to post
Share on other sites
13 minutes ago, mazagngy said:

I dont need wifi to work 

i just need the Bluetooth and it worked before with 10.15 without problems using your your old efi (i dont know which one) and i see no need for buy a pci wifi/bt just for working bt if the built in one worked without problem 

I follow this thread

https://www.tonymacx86.com/threads/designare-z390-intel-cnvi-9560-bluetooth-partial-success.278116/

but i dont know how to enable HS14 this is all i need 
so please tell me how to enable hs14 or if u can give me ssdt with hs14 enabled 

and my motherboard is z390 aorus pro wifi not master


hs14 is disabled via the dsdt as standard would need to edit the dsdt to enable it fully.

 

just to add my 2 pence here, I disagree with the above method as where it does work your also creating problems for the kernel. I totally don’t advise what your doing, it won’t break anything but like I said above it creates problems. Your machine and your choices bud but my advise stands the same as before. 

 

16 minutes ago, c1ru said:

 

Im using all our setup and works awesome, but I have a question, what can I do to enter in bios? after boot my machine I see the logo and nothing more until reach the desktop login.

Also if I press f2 to enter in bios I see black screen.

The only issue is when wakeup from sleep I need to replug my welkin usb to get bluetooth working again.

Also, can I delete all of this patch below than 10.15?

 

Captura de pantalla 2020-01-11 a las 13.04.25.png


don’t remove anything like that from my EFI Buddy. It’s not used if it’s not needed but just leave it be to be safe.

Edited by AudioGod

Share this post


Link to post
Share on other sites
7 minutes ago, mazagngy said:

I dont need wifi to work 

i just need the Bluetooth and it worked before with 10.15 without problems using your your old efi (i dont know which one) and i see no need for buy a pci wifi/bt just for working bt if the built in one worked without problem 

I follow this thread

https://www.tonymacx86.com/threads/designare-z390-intel-cnvi-9560-bluetooth-partial-success.278116/

but i dont know how to enable HS14 this is all i need 
so please tell me how to enable hs14 or if u can give me ssdt with hs14 enabled 

and my motherboard is z390 aorus pro wifi not master

I think you can add an argument inside clover with uia_include=hs14 but wait for an expert to tell you.

Share this post


Link to post
Share on other sites
Just now, c1ru said:

I think you can add an argument inside clover with uia_include=hs14 but wait for an expert to tell you.


yeah that might work as it goes, you can try that but the dsdt may not allow it so you may still need to edit it.

Share this post


Link to post
Share on other sites
3 minutes ago, c1ru said:

I think you can add an argument inside clover with uia_include=hs14 but wait for an expert to tell you.

 

6 minutes ago, AudioGod said:


hs14 is disabled via the dsdt as standard would need to edit the dsdt to enable it fully 

Thanks for both of you guys 

and im really sorry for keep asking im just new to Hackintosh but i learn fast 

so can anyone of you tell me how to edit the dsdt to enable hs14 if possible 

Share this post


Link to post
Share on other sites
11 minutes ago, mazagngy said:

 

Thanks for both of you guys 

and im really sorry for keep asking im just new to Hackintosh but i learn fast 

so can anyone of you tell me how to edit the dsdt to enable hs14 if possible 


no problem bud, I’m here to help where I can and most people on here are super friendly and will help where they can too. :) 
 

if you ask @texem nicely and he’s not busy he might be able to do it for you.

otherwise MaLD0n.

try doing what @c1ru suggested first of all and see if it works for you.

Edited by AudioGod

Share this post


Link to post
Share on other sites
4 minutes ago, AudioGod said:


your welcome, and the same too you good buddy. :thumbsup_anim:

Can I change VirtualSMC inside kext-other to fakesmc in order to use hardware monitor?

Share this post


Link to post
Share on other sites
2 minutes ago, c1ru said:

Can I change VirtualSMC inside kext-other to fakesmc in order to use hardware monitor?

You can but I wouldn’t personally. You can install the additional kexts needed for virtualsmc to make it work too. 
 

download the latest version of VirtualSMC and take the additional kexts from it you need to make hardware monitor work.

Edited by AudioGod

Share this post


Link to post
Share on other sites
1 hour ago, AudioGod said:

@WizeMan Any progress bud?


Hey mate, I haven’t tested it yet as I have a deadline for an iOS app and interrupting my flow will kick me out of “the zone” :D

 

If my mind is clear tonight I’ll try if not I’ll try tomorrow early in the morning (Greece time) and report back.

 

Needless to say that your support and personal effort on this thread is out of this world! Thank you @AudioGod

Edited by WizeMan

Share this post


Link to post
Share on other sites
2 minutes ago, WizeMan said:


Hey mate, I haven’t tested it yet as I have a deadline for an iOS app and interrupting my flow will kick me out of “the zone” :D

 

If my mind is clear tonight I’ll try if not I’ll try tomorrow early in the morning (Greece time) and report back.

 

Needless to say that your support and personal effort on this thread is out of this world! Thank you @AudioGod


no problem buddy, whenever you get around to it just let me know.

could also be clover so update it only selecting the first two options On a custom install when doing so.

il screenshot it when I’m on my hack next to show you. :) 

Share this post


Link to post
Share on other sites
17 minutes ago, AudioGod said:


no problem buddy, whenever you get around to it just let me know.

could also be clover so update it only selecting the first two options On a custom install when doing so.

il screenshot it when I’m on my hack next to show you. :) 


Fab! Thank you!

Share this post


Link to post
Share on other sites
1 hour ago, WizeMan said:


Hey mate, I haven’t tested it yet as I have a deadline for an iOS app and interrupting my flow will kick me out of “the zone” :D

 

If my mind is clear tonight I’ll try if not I’ll try tomorrow early in the morning (Greece time) and report back.

 

Needless to say that your support and personal effort on this thread is out of this world! Thank you @AudioGod

Do you send apps with a hackintosh ? I send it latest update with my hackintosh without issue, but I don’t know I have save my serial number from this time. 

Share this post


Link to post
Share on other sites
3 minutes ago, c1ru said:

Do you send apps with a hackintosh ? I send it latest update with my hackintosh without issue, but I don’t know I have save my serial number from this time. 


Although where I work we distribute apps using automations on a Mac Mini server, I have also uploaded archives on the App Store successfully with my Hack. I don’t think that changing serial number on your hack will bring any issues to app distribution.

Edited by WizeMan

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F11c, 9900k with a 5700 XT but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8600K, 8700, 8700K, 9600K, 9700K, 9900K, 9900KS
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.2Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ RX 5700 XT ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 32GB @3600mhz (2 x 16GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Catalina 10.15.3
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F11c to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f11c.zip - Aorus Z390 Master Bios F11c 
       
      Use this folder with fully patched DSDT
      Current EFI 
      Updated 04/02/2020
      EFI Update - 04/02/2020 - Use with Bios revision F11c Only or Replace with the older F10 DSDT if you don't want to update the bios
      AG Clover Z390 Master Navi Vega EFI.zip - Vega, Navi (5700, 5700XT), Radeon VII DSDT EFI
      AG Clover Z390 Master Polaris EFI.zip - RX5XX Polaris DSDT EFI
       
       
      CFG Unlock (MSR) F11c BIOS Profile - The Easy Way 
      Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU
       
       
      ADDITIONAL DSDT's & Older EFI’s (A big thanks to @MaLd0n for compiling these DSDT's)
       
       
      Alternative EFI - OpenCore No DSDT and Done the way OpenCore intended it (04/02/2020)
       

      Alternative EFI 2 - N-D-K Fork of OpenCore (04/02/2020)
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://www.olarila.com/forum/17-dsdt-patch-requests/
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F11C)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Win 8/10WHQL
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 256MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Enabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS

       
       

       

       

       

       

       

       

    • By ricardos7
      Boa tarde a todos, estou fazendo um hack em um notebook Dell 5557, as configurações estão abaixo.
      Preciso de ajuda para terminar alguns detalhes que nÃo consegui, alguém poderia ajudar?
       
      bem com a minha pasta EFI que pode ser baixada nesse post vc poderá fazer o seu hack mais facilmente nesse modelo,
      pois quase tudo ja esta configurado e pronto pra uso.
       
      ESPECIFICAÇÕES TÉCNICAS
      Processador Intel Core i7 - 6ª Geração Intel Core i7-6500U
      Velocidade: 2.5 GHz até 3.1 GHz com Max Turbo Cache: 4Mb
      Memória RAM Quantidade: 16GB DDR3L 1600MHz (2X8).
      Armazenamento Capacidade: 240 GB SSD
      Tela Tamanho:15.6” Resolução: FULL HD 1920x1080p Touch
      Webcam integrada de alta definição (720p) com microfone digital
      Gráfico Integrado Intel HD 520
      NVIDIA® GeForce 930M com 4GB DDR3 Dedicada
      Áudio Realteck ALC255

      Dell Wireless 1707 WiFi, chip ar9565
      1x  HDMI 1.4ª
      2x USB 3.0
      1x USB 2.0
      1x Ethernet 10/100 RJ-45
      1x Entrada de Cartão 5 em 1 (SD, SD 3.0, SDHC, MS e MS PRO)
      Leitor de Cartão
      Tipo: SD, SDHC, SD3.0, MS, MS Pro
      Alimentação Bivolt 3 células 43Wh
       
       
      O QUE NÃO FUNCIONA?
      BRILHO DA TELA
      BLUETOOTH
      SONO (Hibernação)
      HDMI (audio) video funciona mais a tela do note fica preta ao conectar o cabo HDMI
      GRAFICOS DEDICADOS NVIDEA 930M (DESATIVADO)
       
      O QUE FUNCIONA?
       
      GRAFICOS INTEL
      WI-FI - a intel original foi substituída pela DELL dw1707 ar9565
      AUDIO
      TECLADO
      TRACKPAD (com gestos)
      TOUCHSCREEN (com alguns gestos)
      TECLAS  DE ATALHO
      PLACA DE REDE RJ45
      GERENCIAMENTO DE ENERGIA
       
      OBS. PARA DESATIVAR OS GRÁFICOS FOI USANDO UMA SSDT EM CONJUNTO COM A DSDT-5 E 7, DEPOIS DE APLICADO ALGUNS PACHES.
       
      A DSDT E AS SSDT
      PACHS BASICOS APLICADOS.
      Aparentemente o gerenciamento de energia está funcionando bem, pelo menos o processador parece esta bem estável.
       

       
      PASTA OTHER CLOVER (DEPOIS DESSA IMAGEM FOI ADICIONADO MAIS DUAS KEXT QUE NAO ESTAO PRESENTES NA IMAGEM, PARA FUNCIONAR
      O TOUCH E PARA O WIFI CONSEGUIR ENCONTRAR AS REDES.
       

       
      EFI 
       

       
       
       
       
      ESTAREI DEIXANDO UM LINK PARA DOWNLOAD DA MINHA PASTA EFI, CASO ALGUEM ESTEJA FAZENDO ESSE MESMO HACK ESSA PASTA PODERÁ AJUDAR.
       
      ATENÇÃO
       
      LEMBRANDO QUE OS ARQUIVOS DSDT E SSDT, SSDT DE 5 A 8 SÃO DO MEU NOTEBOOK, QUEM FOR USAR DEVER EXTRAIR E CONSTRUIR SEUS PRÓPRIOS DSDT E SSDT.
      O SSDT-EC E O SSDT-PNLF PODEM SER USADOS POIS SÃO GENERICOS.
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F PARA COLOCAR NO PENDRIVER DE INSTALAÇÃO.
      https://drive.google.com/open?id=1nPM2CNgpr7cwOkjwj7UReziqrh9xjtf1
      SE NAO SUBIR COM A Config.plist INICIAL SELECIONE A Config2.plist
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (EM USO) 14/02/2020
      https://drive.google.com/open?id=1US7j-YlufrFTasLihmUZwElyV4jBfHDg
       
      LINK DE DOWNLOAD EFI DELL 5557-P39F (ANTIGA)
      https://drive.google.com/open?id=1Q2tnoqQZ9K44Bv6k2k1yauaHCAop_ZyW
       
      QUEM PUDER AJUDAR A CORRIGIR OS PROBLEMAS RESTANTE EU AGRADEÇO, OBRIGADO.
       
       

    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
    • By MaLd0n
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×