Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

519 posts in this topic

Recommended Posts

Little Snitch for years...now switch to Radio Silence + iStat... all working good! ...try Hands Off for 'bout 1 week...uninstalled in 0 time...bug and yes, KP

 

Share this post


Link to post
Share on other sites
Advertisement
On 8/25/2019 at 7:09 PM, panosru said:

 

 

BTW, I noticed that iStat does not shows Fan RPM

 

 

 

Fan's are defined in SSDT-5.aml , anyway 

 

replace FakeSMC with VirtualSMC  ( here 1.0.7 ) .. 

 

876591394_Bildschirmfoto2019-08-26um19_31_32.jpg.32e52ff62f99c8af16413ea21aa46ef5.jpg

 

FAN0 is not connected here

 

Cheers

 

Share this post


Link to post
Share on other sites

@texem virtualSMC does not support GPU temps though... 

 

Where did you find SSDT-5.aml ? 

Share this post


Link to post
Share on other sites
Just now, panosru said:

@texem virtualSMC does not support GPU temps though... 

 

Where did you find SSDT-5.aml ? 

 

right, unfortunately one can not have all :wink_anim: 

 

SSDT-5.AML from origin DSDT, F4 Clover dump - not patched and loaded by Clover automatically until you drop OEM SSDT.

 

 

Share this post


Link to post
Share on other sites
1 minute ago, texem said:

right, unfortunately one can not have all :wink_anim: 

 

 

I guess that is true :D

 

I'm trying to decipher that part: 

Quote

SSDT-5.AML from origin DSDT, F4 Clover dump - not patched and loaded by Clover automatically until you drop OEM SSDT.

 

 

:lol:

Share this post


Link to post
Share on other sites

Dump your DSDT with Clover "F4" and look into your EFI/Clover/ACPI/origin folder. Decompile SSDT-5.aml -> FAN devices.

Share this post


Link to post
Share on other sites

Ah ok, I thought you where talking about Clover Configurator and I was pressing F4 in Clover Configurator but nothing was happening, then I googled it :lol:

 

I will put 3-sec timer for clover to enter in it on boot :D

 

Could you let me know how I can decompile aml files? And once I decompile SSDT-5.aml what then? 

 

Thanks!

Share this post


Link to post
Share on other sites
On 8/25/2019 at 6:39 PM, ilcondannato said:

 

 

Think only way's is uninstall and then reboot/reinstall istat... (I've 6.31 and it work well...)

 

...maybe iStat hate ur Vega LoL ...or it only work with downtown hackintosh for "no money people with RX" ahahahahahah xD

 

btw...I don't use FileVault...and I don't use script in the guide...but all works well and great...

ps on catalina, wake are "one key" start...no double (one for wake one for enter) like Mojave...and...no more {censored} message "usb not eject properly" after wake!!!! (for me patch in Glasgod guide don't work in Mojave)

so...

at this point...definitely my first work goes on this build.

Ps Pr AE and Capture 1 definitely goes on here!

Start producing lol

:thumbsup_anim:

 

Finally solved simply using leaving only VirtualSMC and the nice  HWMonitorSMC2 app!

 

2111221670_Screenshot2019-08-26at21_54_34.png.958d48d87360a5d8b36b9c0ea7183bd6.png

 

Nice to know that we are ready for Catalina!! :thumbsup_anim:

Share this post


Link to post
Share on other sites

I kind of like iStat Menus because it combines many things and it is very detailed about each aspect you monitor; thus I'm gonna stick with what I have for now and try to fix the DSDT to be able to see fans as well

Share this post


Link to post
Share on other sites
I kind of like iStat Menus because it combines many things and it is very detailed about each aspect you monitor; thus I'm gonna stick with what I have for now and try to fix the DSDT to be able to see fans as well

I’d like too but can’t make it work for gpu die


Inviato dal mio iPhone utilizzando Tapatalk
I kind of like iStat Menus because it combines many things and it is very detailed about each aspect you monitor; thus I'm gonna stick with what I have for now and try to fix the DSDT to be able to see fans as well

I’d like too but can’t make it work for gpu die


Inviato dal mio iPhone utilizzando Tapatalk

Share this post


Link to post
Share on other sites
Posted (edited)

@gino8080 I did made GPU Die work as you can see in the following screenshot:

image.png.38cfb987fefa160af38ca3e46d16aacf.png

 

but I do not have fan indicators, so I'm unable to see CPU Fan RPM's, and it is kind of important for me for my reasons.

 

I did that by replacing VirtualSMC with FakeSMC, BUT I do not suggest it to anyone, and I quote @AudioGod:

Quote

FakeSMC is an older no longer supported version of virtual smc. The problem is it’s no better then virtual smc  and as time goes on it’s going to get more and more troublesome.

glasgood gave up using fakesmc because of how it was affecting different systems including he’s own.

 

thus; I'm suggesting you stick with HWMonitorSMC2 since it works perfectly fine, I will do it as well, and I will keep iStat Menus for Memory, Network, HDD and Time until maybe an update of VirtualSMC will make iStat Menus being able to detect GPU as well.

Edited by panosru

Share this post


Link to post
Share on other sites
2 hours ago, panosru said:

I kind of like iStat Menus because it combines many things and it is very detailed about each aspect you monitor; thus I'm gonna stick with what I have for now and try to fix the DSDT to be able to see fans as well

 

iStat Menus is showing Fan1 and Fan2 speeds for me, using VirtualSMC 1.0.7. I'm not sure which fans those correspond to - they are running around 860 to 930rpm. I'd imagine one is the CPU fan. Are you referring to some other fans not showing up?

Share this post


Link to post
Share on other sites
11 hours ago, panosru said:

 

Could you let me know how I can decompile aml files? And once I decompile SSDT-5.aml what then? 

 

Thanks!

 

Take a look for "MaciASL" ACPI Table Decompiler/Compiler.

 

8 hours ago, panosru said:

@gino8080 I did made GPU Die work as you can see in the following screenshot:

 

 

but I do not have fan indicators, so I'm unable to see CPU Fan RPM's, and it is kind of important for me for my reasons.

 

I did that by replacing VirtualSMC with FakeSMC, BUT I do not suggest it to anyone, and I quote @AudioGod:

 

thus; I'm suggesting you stick with HWMonitorSMC2 since it works perfectly fine, I will do it as well, and I will keep iStat Menus for Memory, Network, HDD and Time until maybe an update of VirtualSMC will make iStat Menus being able to detect GPU as well.

 

The author of VirtualSMC wrote he wants to be most compatible to original Hardware with completely new written code and has no plans to integrate more sensors like f.i. FSMC with plugins does. This is why our "iMacPro" only has 2 fans in iStat .

No idea why Hwmonitor is able to show us all 5 possible fans and btw: there are forks for FSMC and some development still exist.

   

u9t435543

This wAFAIdderwe tretrertetgdfgdfgfdtretreterretreter4

Share this post


Link to post
Share on other sites
11 hours ago, hackinbot said:

 

iStat Menus is showing Fan1 and Fan2 speeds for me, using VirtualSMC 1.0.7. I'm not sure which fans those correspond to - they are running around 860 to 930rpm. I'd imagine one is the CPU fan. Are you referring to some other fans not showing up?

 

With VirtualSMC I'm also able to see Fan1 and Fan2, and I also assume they correspond to my water colling fans. They run at ~950rpm, of course with VirtualSMC I'm not getting GPU temp in iStat, I'm able to see GPU temp with HWMonistor SMC2.

 

Also in HWMonitor SMC2 fan indicators, Fan0 and Fan4 indicate my CPU fans, and Fan1 indicate a fan I have on the backside of the tower.

 

@texem thanks a lot for the info! I was digging in GitHub yesterday, indeed there are many FakeSMC forks out there, I think I'm gonna stick with the flow, VirtualSMC is young in comparison to FakeSMC, but is it's successor so I believe further development will be done and maybe a 3rd party plugin will allow to have GPU stats as well, nothing to rush about I think.

 

I removed the GPU Die from iStat Menus and placed HWMonitor SMC2 next to it to show my GPU temp:

image.png.6fdcd3cb39d18193f1fbe11e3939e27d.png

 

The only thing that I would love to have in HWMonistor SMC2 is to not dim the menu bar when you are not in Finder. For instance when I switch from Finder to any other app, the menubar dim:

image.png.0b58c503bc152566516daa6887ccb870.png

 

I know that this is the native macOS behaviour, but I would like to have an option to not dim :)

 

Cheers!

 

Share this post


Link to post
Share on other sites
20 hours ago, panosru said:

 

With VirtualSMC I'm also able to see Fan1 and Fan2, and I also assume they correspond to my water colling fans. They run at ~950rpm, of course with VirtualSMC I'm not getting GPU temp in iStat, I'm able to see GPU temp with HWMonistor SMC2.

 

Also in HWMonitor SMC2 fan indicators, Fan0 and Fan4 indicate my CPU fans, and Fan1 indicate a fan I have on the backside of the tower.

 

@texem thanks a lot for the info! I was digging in GitHub yesterday, indeed there are many FakeSMC forks out there, I think I'm gonna stick with the flow, VirtualSMC is young in comparison to FakeSMC, but is it's successor so I believe further development will be done and maybe a 3rd party plugin will allow to have GPU stats as well, nothing to rush about I think.

 

I removed the GPU Die from iStat Menus and placed HWMonitor SMC2 next to it to show my GPU temp:

image.png.6fdcd3cb39d18193f1fbe11e3939e27d.png

 

The only thing that I would love to have in HWMonistor SMC2 is to not dim the menu bar when you are not in Finder. For instance when I switch from Finder to any other app, the menubar dim:

image.png.0b58c503bc152566516daa6887ccb870.png

 

I know that this is the native macOS behaviour, but I would like to have an option to not dim :)

 

Cheers!

 

 

Try changing View Preferences theme

This is mine, and that it do NOT dim when I change app, only when I change focus monitor, the secondary is dimmed 

 

 208759817_Screenshot2019-08-28at10_01_47.png.d9d71bd1b27a99461a79cd9d250c4986.png

Share this post


Link to post
Share on other sites

@gino8080 Goos morning! Ah I see, the same behaviour from my side too, when I switch monitors then it dimms. Well would be cool if it didn't but what the heck :D

 

Cheers!

Share this post


Link to post
Share on other sites
Posted (edited)
On 8/27/2019 at 7:43 AM, panosru said:

I removed the GPU Die from iStat Menus and placed HWMonitor SMC2 next to it to show my GPU temp:

image.png.6fdcd3cb39d18193f1fbe11e3939e27d.png

 

The only thing that I would love to have in HWMonistor SMC2 is to not dim the menu bar when you are not in Finder. For instance when I switch from Finder to any other app, the menubar dim:

image.png.0b58c503bc152566516daa6887ccb870.png

 

 

How did you get the GPU Temp from HWMonitorSMC2 to show up in the Menu Bar? I'm unable to drag anything from HWMonitorSMC2, and I don't see an option to display an item in the Menu Bar.

 

EDIT FOUND ANSWER: Figured it out - Just double-click the item in the panel and it'll get promoted to the Menu Bar.

Edited by hackinbot
Answer

Share this post


Link to post
Share on other sites

HWMonitorSMC2 is showing the RX580 as using over 100W power at idle... !!

 

How realistic is this? Or is the sensor unreliable? This card is supposed to idle around 16W - 30W.

 

Actually... the GPU core clock and memory clock are also maxed out... constantly. Am I possibly missing some kext to control the GPU's power?

 

I'm using AudioGod's EFI with some additional drivers for FileVault.

2019-08-28 at 2.35 PM.png

Share this post


Link to post
Share on other sites
1 minute ago, hackinbot said:

HWMonitorSMC2 is showing the RX580 as using over 100W power at idle... !!

 

How realistic is this? Or is the sensor unreliable? This card is supposed to idle around 16W - 30W.

 

Actually... the GPU core clock and memory clock are also maxed out... constantly. Am I possibly missing some kext to control the GPU's power?

 

 

Would you please run the following script in terminal and post your result back here: 

 

while sleep 1; do clear;ioreg -l |grep \"PerformanceStatistics\" | cut -d '{' -f 2 | tr '|' ',' | tr -d '}' | tr ',' '\n'|grep 'Temp\|Fan\|Clock'; done

 

 

 

Share this post


Link to post
Share on other sites
3 minutes ago, larabee said:

 

Would you please run the following script in terminal and post your result back here: 

 

while sleep 1; do clear;ioreg -l |grep \"PerformanceStatistics\" | cut -d '{' -f 2 | tr '|' ',' | tr -d '}' | tr ',' '\n'|grep 'Temp\|Fan\|Clock'; done

 

"Fan Speed(%)"=0
"Core Clock(MHz)"=971
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1078
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1067
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1019
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1103
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1100
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1112
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1141
"Memory Clock(MHz)"=2050

Any ideas?

Share this post


Link to post
Share on other sites
Posted (edited)
10 minutes ago, hackinbot said:

"Fan Speed(%)"=0
"Core Clock(MHz)"=971
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1078
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1067
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1019
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1103
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1100
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1112
"Memory Clock(MHz)"=2050
"Fan Speed(RPM)"=0
"Temperature(C)"=50
"Fan Speed(%)"=0
"Core Clock(MHz)"=1141
"Memory Clock(MHz)"=2050

Any ideas?

 

The results are the same as hardware monitor SMC, so the software is reporting the right numbers. Looks like your card got stuck at max speed all the time... and the Wattage draw is typical for RX580. 

Do you run any kind of software in the background? I recommend you remove all monitoring software / Kext then run the script again. My vega 56/64, RX570 , and radeon VII are working perfectly fine with the same monitor setup and yours. 

Also, when look at your VRAM usage, it's almost 2/3 full. That must be something that's been using your card....

 

Edited by larabee

Share this post


Link to post
Share on other sites
5 minutes ago, larabee said:

 

The results are the same as hardware monitor SMC, so the software is reporting the right numbers. Looks like your card got stuck at max speed all the time... and the Wattage draw is typical for RX580. 

Do you run any kind of software in the background? I recommend you remove all monitoring software / Kext then run the script again. My vega 56/64, RX570 , and radeon VII are working perfectly fine with the same monitor setup and yours. 

Also, when look at your VRAM usage, it's almost 2/3 full. That must be something that's been using your card....

 

 

You're right, it was just "stuck". I ran the OpenCL Geekbench test, then opened up the HWMonitorSMC2 pane to see if the frequencies would change - and the machine did the white screen freeze lockup. After power cycling the hack, the GPU core now fluctuates between 460-1000MHz. GPU Memory is locked at 2050MHz. I may have a faulty card - got it really cheap. I suspect maybe it was used for crypto mining.

 

Do your cards report the correct amount of total VRAM in HWMonitorSMC2? Mine adds up to around 3.25GB even though it's reported as a 4GB card in MacOS.

Share this post


Link to post
Share on other sites
1 minute ago, hackinbot said:

 

You're right, it was just "stuck". I ran the OpenCL Geekbench test, then opened up the HWMonitorSMC2 pane to see if the frequencies would change - and the machine did the white screen freeze lockup. After power cycling the hack, the GPU core now fluctuates between 460-1000MHz. GPU Memory is locked at 2050MHz. I may have a faulty card - got it really cheap. I suspect maybe it was used for crypto mining.

 

Do your cards report the correct amount of total VRAM in HWMonitorSMC2? Mine adds up to around 3.25GB even though it's reported as a 4GB card in MacOS.

 

My Radeon VII memory clock is also stuck at max in both the hack and windows (a known issue with the VII). But my RX570 / Vega never has this before. I highly recommend that you remove all monitoring kext / software then do a cold reboot and run the script to check mem clock again. 

with 4GB of VRAM, you will always get around 3.25 GB usable, that's normal. 

 

Share this post


Link to post
Share on other sites
1 hour ago, larabee said:

 

My Radeon VII memory clock is also stuck at max in both the hack and windows (a known issue with the VII). But my RX570 / Vega never has this before. I highly recommend that you remove all monitoring kext / software then do a cold reboot and run the script to check mem clock again. 

with 4GB of VRAM, you will always get around 3.25 GB usable, that's normal. 

 

 

Uninstalled iStat and HWMonitor. I never added any monitoring Kexts. Cold reboot. Found out that the Nitro+ series of video cards have 2 BIOS's which are selected using a dip switch on the card. Switched it over to the "quiet" BIOS position. Here's the results:

 

"Fan Speed(%)"=0
"Core Clock(MHz)"=337
"Memory Clock(MHz)"=1750
"Fan Speed(RPM)"=0
"Temperature(C)"=48

 

The memory clock is always 1750. I'll install Win10 on the hack this weekend to see if this is a software or hardware issue.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By BuXb
      SleepOnLowBattery (“SOLB”)
      by BugsB, based on a script by Toggi3 * + more code snippets from the www
       
      For those of us whose HackBook (or even real MacBook) doesn't automatically and properly go into power saving mode on very low battery but just powers down coldly, crashing macOS: “SOLB”, a small and RAM/ CPU wise very low footprint AppleScript based utility that checks the battery level every 2 minutes, running via daemon in the background.
       
      You can choose between two versions, either with or without sound. Both display a notification in the top right of your screen.
       
      Between ≤10 and >8% battery charge:

       
      Between ≤8 and >5% battery charge:

       
      On ≤ 5% battery charge you will see a 10 seconds countdown dialog box in 1 second intervals:

       

       
      which you can cancel, or have your your *ac*Book be sent to sleep when down to 0.
       
      The version with sound uses the pleasant macOS US female voice Allison. If the lady is not installed, you can download "her" via System Preferences, Accessibility, Speech (pane tab should get opened by the install script), click onto the two arrows to the right of System Voice, Customize, English (Unites States) -- Female, activate Allison, OK (macOS downloads voices to /System/Library/Speech/Voices - Allison consumes 120 MB).
       
      If you want to see/ see and listen first, disconnect your Mac from its power supply and double click the “run Demo” file in either folder, with or without sound.
       
      The launcher is installed per user, so one user can use the script with and another user the script without sound.
       
      Run your desired install.command, with or without sound. The script should be active right away without restart.
       
      Regarding the sound version, you can also:
      - download any other English voice of your liking and edit the name inside the script at the very top
      - download any language voice and translate the text inside the script
      Edit with Apple Script Editor, save, install, reboot.
       
      Tested working in macOS High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.1.
      Please feedback if this utility also works for you.
       
      If you have ideas, experience bugs, etc., please contribute as precise, succinct, productive and friendly as possible. In case of a bug, always include your version of macOS for me or others to try and help. Thank you.
       
      ENJOY
       
      VERSION HISTORY:
      2019-11-15 v. 1.1
          •    BUG FIX: changed all occurrences of ExternalChargeCapable to ExternalConnected in all Apple Script .scpt files (SleepOnLowBattery.scpt, SleepOnLowBatterySound.scpt, demo.scpt) to restore functionality
          •    IMPROVEMENT: made queries of MaxCapacity and CurrentCapacity more compatible to work with hopefully any system
          •    NEW: added Catalina compatibility to install scripts; verified Mojave compatibility
          •    NEW: Sound script uses voice Allison if installed, otherwise automatically defaults back to another English standard voice (Daniel, Alex or Fred)
       
      2018-11-10 v.1.0
          •    initial version
       
      IDEAS TO IMPLEMENT IN FUTURE RELEASES:
      Have the sound version install script check if Allison is installed, and if not, offer to download and install it. Purely cosmetic: find a way to have the display notification in the top right of the screen not display the Script Editor icon but the one of the utility without turning the utility into an app but by maintaining a script to keep the load footprint low. This is currently neither possible with an Apple Script nor with an Apple Script Bundle file, only with the script compiled into an app. One possibility might be a Perl approach, if someone volunteers. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      * Thanks to Toggi3 for the base script:
      https://hints.macworld.com/article.php?story=20110219013713667
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      THE CODE (of the version with sound):
      install.command:
       
      LaunchAgent SleepOnLowBatterySound.plist:
       
      Script SleepOnLowBatterySound.scpt:
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       
      SleepOnLowBattery (SOLB) by BugsB v.1.1 (2019-11-15).zip
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By kelvin henrique
      Faz pouco menos de uma semana que estou tentando dar boot usando um pendrive no lenovo g40-80, mas todas as vezes que tento algum kernel panic diferente acontece, não entendo tanto de hackintosh mas pelo que li tanto aqui no forum quanto em outros sites me fizeram constatar que talvez o erro seja falta de kexts, alguem possui os kexts para esse notebook ??
       
      primeiro erro que tive era porque estava usando um pendrive de 8gb, o recomendado é 16 no minimo pelo oque vi, fui la, comprei um de 32, mudou o kernel panic mas era só um dos erros resolvidos.
       
      especificações dele:
      Processador: Intel Core i3-5005U
      Grafico: Intel HD Graphics 5500
      originalmente ele vinha com um hd de 500gb e 4gb de ram, mudei pra um ssd de 128gb e 8 gb de ram
       
      ja percebi que unico problema desse notebook é que a placa de wifi não vai funcionar, mas quanto a isso não tem problema pois se conseguir mesmo instalar o mac eu comprou outra
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F10, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.1Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F10 to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f10.zip - Z390 MASTER Bios Revision F10
       
      Use this folder with igpu Enabled in bios for working Sidecar (Updated 1st Nov)
      AudioGods Z390 Master Vega Navi EFI.zip - Vega 56/64 Navi & Radeon VII DSDT
      AudioGods Z390 Master RX EFI.zip - RX Series DSDT
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these DSDT's)

       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Other OS
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 512MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Disabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       
       
×