Jump to content
AudioGod

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

519 posts in this topic

Recommended Posts

7 hours ago, AudioGod said:


just a wild guess here but it could have something to do with the T2 chip not being there. You could try changing to smbios 19,1 with or without the igpu enabled and see if that resolves it. (If igpu enabled then add slide=0 and your probably need a battery bios reset to get it to boot in for the first time)

 

Yeah I'm already on smbios 19,1 with igpu enabled and slide=0, so wouldn't be a T2 chip issue. Looks like it is working for others, so I'll have to start investigating other possibilities.

Share this post


Link to post
Share on other sites
Advertisement
On 11/3/2019 at 12:07 AM, AudioGod said:

 

just updated weg to 1.3.4 and your be fine again bud

 

Hello buddy! sadly upgraded WEG but problem still here (maybe is just less frequent)

 

On 11/3/2019 at 12:05 AM, texem said:

 why didn't you upgrade WEG to 134  ?

 

Because I usually tend to NOT touch anything when it's working :)

 

 

please is there anything else I can try?

 

maybe are the VGTAB settings injected?

 

Should I share my EFI?

Screenshot 2019-11-05 at 10.04.56.png

Share this post


Link to post
Share on other sites

I'm not having a lot of luck with this.

 

OS: 10.15.1 Catalina

CPU: i7 8700k + Corsair Hydro H150i

board: z390 Aorus Pro (f11 BIOS)

gpu: XFX RX 5700 XT Thicc II 8gb

ram: Corsair Vengeance 32GB (4x8GB) DDR4 3000

 

I've set all my BIOS settings to those spelled out in this guide, except for BIOS guard which I cannot find in F11.  "Intel Platform Trust Technology" is disabled though.

 

After running the shell command to create the installer, I've mounted the EFI and pasted the contents of AudioGods Z390 Pro EFI VEGA Navi Radeon VII F11 DSDT.zip.

 

Booting from the USB shows me the normal Clover boot screen, then I'm able to select the option to install Catalina.  When I select it, I don't get the normal scrolling text.  Everything goes black for several seconds, and then I see the attached image.

 

This is using a 1080p monitor connected via HDMI.  When I connected to a 4k tv, I got the same behavior except with a lot more of the black space.

 

I'm pretty novice when it comes to hackintoshing, and right now I'm pretty lost.  Any help would be appreciated.

IMG_1061.jpg

Share this post


Link to post
Share on other sites
6 hours ago, crytz said:

I'm not having a lot of luck with this.

 

OS: 10.15.1 Catalina

CPU: i7 8700k + Corsair Hydro H150i

board: z390 Aorus Pro (f11 BIOS)

gpu: XFX RX 5700 XT Thicc II 8gb

ram: Corsair Vengeance 32GB (4x8GB) DDR4 3000

 

I've set all my BIOS settings to those spelled out in this guide, except for BIOS guard which I cannot find in F11.  "Intel Platform Trust Technology" is disabled though.

 

After running the shell command to create the installer, I've mounted the EFI and pasted the contents of AudioGods Z390 Pro EFI VEGA Navi Radeon VII F11 DSDT.zip.

 

Booting from the USB shows me the normal Clover boot screen, then I'm able to select the option to install Catalina.  When I select it, I don't get the normal scrolling text.  Everything goes black for several seconds, and then I see the attached image.

 

This is using a 1080p monitor connected via HDMI.  When I connected to a 4k tv, I got the same behavior except with a lot more of the black space.

 

I'm pretty novice when it comes to hackintoshing, and right now I'm pretty lost.  Any help would be appreciated.

IMG_1061.jpg


I have a 5700 XT too and it works with my EFI but it’s not right yet thanks to Catalina so I’m still using a Vega56 for now and will try it again with the next os update.

 

try this anyway, go into the clover config and remove the agdpmod=pikera and -cdfon boot flags and try again buddy. :) 

Share this post


Link to post
Share on other sites
32 minutes ago, larabee said:

@AudioGod WhateverGreen is still not optimized for it. Do you feel adventurous ? Remove WEG and see if it works :) 

I can run my 5700xt with the current WEG kext and it works for me. Not great mind you but it works..lol

i sure don’t get a garbled green screen anyway.

Share this post


Link to post
Share on other sites

At first many thanks to @AudioGod and all the beautiful minds who made this build possible.

 

I'm still on Mojave 10.14.6, thus I went with  an older EFI (Z390 Pro DSDT EFI.zip) and BIOS F10 with small changes though.

 

BIOS Settings:

• BIOS → Windows 8/10 Features → Other OS
• BIOS → CSM Support → Disabled
• MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Enabled
• Peripherals → Initial Display Output → PCIe 1 Slot
• Peripherals → Trusted Computing → Security Device Support →  Disabled
• Peripherals → USB Configuration → Legacy USB Support →  Auto
• Peripherals → USB Configuration → XHCI Hand-off →  Enabled
• Peripherals → Network Stack Configuration → Network Stack →  Disabled
• Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
• Chipset → Vt-d → Disabled (I don't need it)
• Chipset → Internal Graphics : Enabled
• Chipset → DVMT Pre-Allocated : 32M
• Chipset → DVMT Total Gfx Mem : 128M
• Chipset → Above 4G Decoding : Enabled
• Chipset → Audio Controller → Enabled
• Chipset → Wake on LAN Enable : Disabled
• Power → Platform Power Management → Enabled
• Power → ErP → Enabled
• Power → RC6 (Render Standby) → Disabled

I've had sound distortions with the original EFI thus I've changed the following:

 

config.plist:

 

<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>AFGLowPowerState</key>
			<true/>
			<key>Inject</key>
			<string>11</string>
			<key>ResetHDA</key>
			<true/>
		</dict>
      	....

and updated:

 

- Lilu.kext to 1.3.9

- AppleALC,kext to 1.4.3

 

To Do:

- About this Mac showing I9 instead of I7

- Hot-Swap on SATA devices - thanks to @eSaF

 

Any suggestions how to fix them would be much appreciated.

 

Again, many thanks for this build.

Mojave 10.14.6.png

Geekbench 4.3.1.png

Geekbench 4.3.1 Compute.png

Info Bench.png

Info Compute.png

LuxMark.png

Hardware-Encoding.png

USB.png

sound.png

Edited by noctrl
Edited ToDo's

Share this post


Link to post
Share on other sites
2 hours ago, noctrl said:

- Hot-Swap on SATA devices

 

If I remember correctly you need to add this patch to your config.plist also in the BIOS you need to enable 'Hot Swop' for that particular port. Good luck.

 

Name - com.apple.driver.AppleAHCIPort

Find    - 40600200

Replace - 00000000

Comment - Patch Hotplug

Share this post


Link to post
Share on other sites

I have 2 questions:

1. Has anyone had any issues with random kernel panics when the computer is sleeping similar to this "Kernel Extensions in backtrace:
         com.apple.driver.watchdog(1.0)" ?

2. Has anyone had any success with OpenCore Bootloader?

Share this post


Link to post
Share on other sites
2 hours ago, eSaF said:

 

If I remember correctly you need to add this patch to your config.plist also in the BIOS you need to enable 'Hot Swop' for that particular port. Good luck.

 

Name - com.apple.driver.AppleAHCIPort

Find    - 40600200

Replace - 00000000

Comment - Patch Hotplug

 

Perfect! Thanks a lot for that one. It works like a charm. Beside that the external icon patch included in the config.plist must be an InfoPlistPatch!

			<dict>
				<key>Comment</key>
				<string>External Icons</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<string>45787465726E616C</string>
				<key>InfoPlistPatch</key>
				<true/>
				<key>Name</key>
				<string>AppleAHCIPort</string>
				<key>Replace</key>
				<string>496E7465726E616C</string>
			</dict>

 

hotplug.png

Edited by noctrl
Added a screenshot

Share this post


Link to post
Share on other sites

Hi Everyone,

 

Just joined.  This Hackintosh thing has been quite a journey for me over the last month.

 

Gigabyte Z390M Gaming + i3-9100F to i5 9600K to then deciding to return everything and just dual boot on my main rig (i7-7700K, Asus Z270G Strix board).  I had just got that finally working perfectly the day before yesterday and then I got the upgrade itch.  Switched out the board in my main rig with this beautiful beast, dropped in an i9-9900K, 64 GB DDR 3200, and an RX 580. (Main rig had a Water Cooled GTX 1080 which decided to poop itself the other day).  After a few hiccups here and there with the installer seeming to stall at 11 minutes remaining I decided to call it a night (3:30AM) and this morning I woke up to a complete install. Yay!  Then I ran into this thread this morning and wish I'd had stumbled on it yesterday to save me hours of headaches.  I think I'll do a fresh install again today following this guide just for the heck of it.

 

Anyway I have a question,  I'd like to understand why are we going with iMacPro 1,1 in this guide instead of 19,1?

 

Thanks for any input, I included some pictures of my build.  I'll take some better pictures of the rig once I run new tubing and clean the dust off the bad boy.

 

IMG_0383.JPG

IMG_0380.JPG

IMG_0374.JPG

IMG_0377.JPG

Share this post


Link to post
Share on other sites

@hungrywallet Hey buddy, I’m glad my thread and EFI has helped you,  i went with macpro1,1 as myself @larabee and @glasgood ran countless amounts of tests and found smbios macpro1,1 to be a lot more friendly with the nvram and in tests it scored higher. Also myself and @larabee prefer not having the igpu enabled and again smbios macpro1,1 just fits the bill better.

Saying all of that though there’s nothing wrong with iMac19,1 and it works perfectly with my EFI so if you want to switch to it then just add the flag slide=0 into the clover config and enable the igpu in the bios. If it doesn’t want to boot after you do that then all you have to do is pull the battery from the motherboard for a minute or two and then load back in your Bios profile and away you go.


little tip, if you Want to use a Vega or Radion VII or Navi gpu then unlock MSR on your motherboard and that will prevent those pesky memory allocation failures at startup. :)

Edited by AudioGod

Share this post


Link to post
Share on other sites

@hungrywallet the key point is pulling out the battery and load the bios profile after unlocking. iMac 19,1 will give you sidecar functionality. 

@AudioGod I freaking reflash my Pro with F10 then flash it back to F11, then unlock MSR, pull the battery out and left it overnight. Damn finally it complies. With the first 10 boot KP, it starts to boot just fine. Looks like I have a riot motherboard haha. 

Share this post


Link to post
Share on other sites
4 hours ago, larabee said:

@hungrywallet the key point is pulling out the battery and load the bios profile after unlocking. iMac 19,1 will give you sidecar functionality. 

@AudioGod I freaking reflash my Pro with F10 then flash it back to F11, then unlock MSR, pull the battery out and left it overnight. Damn finally it complies. With the first 10 boot KP, it starts to boot just fine. Looks like I have a riot motherboard haha. 

 

@larabee at last...lol...and do you prefer it or or have you run back to macpro1,1?

also change your boot flags in your config and make it more vanilla like the old EFI so just darkwake=0, slide=0 and dark=0 and remove the Broadcom kext fixes too. 

Edited by AudioGod

Share this post


Link to post
Share on other sites
10 hours ago, laxattack said:

I have 2 questions:

1. Has anyone had any issues with random kernel panics when the computer is sleeping similar to this "Kernel Extensions in backtrace:
         com.apple.driver.watchdog(1.0)" ?

2. Has anyone had any success with OpenCore Bootloader?

 

2) EFI-OpenCore-z390pro.zip

Share this post


Link to post
Share on other sites
4 hours ago, AudioGod said:

 

@larabee at last...lol...and do you prefer it or or have you run back to macpro1,1?

also change your boot flags in your config and make it more vanilla like the old EFI so just darkwake=0, slide=0 and dark=0 and remove the Broadcom kext fixes too. 

 

I've gone back to iMac Pro 1,1 for the moment, but now I can do whatever the heck I want. I think reflashing the bios + battery reset clear all of the problems now. 

I've removed all Broadcom kexts. I don't really need 'em anyway. 

Share this post


Link to post
Share on other sites
On 11/4/2019 at 8:03 PM, tasc said:

 

Yeah I'm already on smbios 19,1 with igpu enabled and slide=0, so wouldn't be a T2 chip issue. Looks like it is working for others, so I'll have to start investigating other possibilities.

 

I got the DRM video playback working by adding shikigva=1 to my boot args. Not sure why I have to do this, but it works.

 

I'm running 19,1 with enabled intel igpu. I'm injecting "AAPL,ig-platform-id" = <0300983e> to configure headless mode for the igpu.

 

Anyone know why I have to use that bootarg (shikigva) to make DRM work? I'm running on an AMD 560. Just want to make sure I'm not compromising something else by running that setting - DRM playback is not THAT important to me, but would like to have it working.

Share this post


Link to post
Share on other sites
14 minutes ago, tasc said:

 

I got the DRM video playback working by adding shikigva=1 to my boot args. Not sure why I have to do this, but it works.

 

I'm running 19,1 with enabled intel igpu. I'm injecting "AAPL,ig-platform-id" = <0300983e> to configure headless mode for the igpu.

 

Anyone know why I have to use that bootarg (shikigva) to make DRM work? I'm running on an AMD 560. Just want to make sure I'm not compromising something else by running that setting - DRM playback is not THAT important to me, but would like to have it working.

 

you dont need to inject the igpu, its all already done via the dsdt.

that could be why

remove it and shikigva=1 and try again bud

 

ive just updated the efi to make it iMac19,1 so download it and try it as is.

Edited by AudioGod

Share this post


Link to post
Share on other sites
19 minutes ago, AudioGod said:

 

you dont need to inject the igpu, its all already done via the dsdt.

that could be why

remove it and shikigva=1 and try again bud

 

ive just updated the efi to make it iMac19,1 so download it and try it as is.

 

Thanks @AudioGod. What did you update in the EFI? Something in the config.plist or something in the DSDT? Just trying to figure out what (if anything) needs to be updated on my side.

 

Update: Just tried without explicitly injecting platform and removing shikigva arg but it doesn't work, same issue as before. Also I noticed that when not injecting my platform, its injecting "3E910003" instead of "3E910008". I think back in the day, Glasgood told me that I should be using the last one based on my cpu i7 9700k.

 

Edited by tasc

Share this post


Link to post
Share on other sites
13 minutes ago, tasc said:

Thanks @AudioGod. What did you update in the EFI? Something in the config.plist or something in the DSDT? Just trying to figure out what (if anything) needs to be updated on my side.

 

not a lot really, added slide=0 For IGPU enabled, removed some bootflags and kexts, kext updates, smbios change and that's your lot.

we have also made a Simple way to unlock your MSR, its up on the guide now with instructions if you want to do it.

unless of course your coming from the old EFI and still running bios f10 then in that case its pretty major and I advise you flash to the new F11 bios and use the new EFI as a lot has changed including the DSDT

Edited by AudioGod

Share this post


Link to post
Share on other sites

Current EFI Updated 08/11/2019 

Minor changes made to the clover config, kexts updated plus now using SMBIOS iMac19,1 with iGPU enabled for fully working sidecar

Z390 Pro EFI VEGA Navi Radeon VII F11 DSDT iMac19,1.zip - Use with Bios revision F11 Only (Catalina 10.15.1 Vega, Navi, Radeon VII DSDT Installed) 

Z390 PRO EFI RX F11 DSDT iMac19,1.zip - Use with Bios revision F11 Only (Catalina 10.15.1 RX5XX DSDT Installed)
 

CFG Unlock (MSR) F11 BIOS Profile - The Easy Way 

Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU

 

@larabee Has kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam.

It also has all the bios settings listed on this guide pre done and saved onto the profile.

 

MSR Unlocked

 

1 - Download the profile and save it to a USB Key

2 - Go into the bios,

3 - Load the profile, 

4 - Save and exit

5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that.

6 - Reset your Motherboard by removing the power cable and then remove the battery from the motherboard for a minute or two to clear out the bios fully.

7 - Go back into your bios and load back in the saved profile you made,

8 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 

9 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked

 

    PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. 

Edited by AudioGod

Share this post


Link to post
Share on other sites
3 hours ago, tasc said:

 

I got the DRM video playback working by adding shikigva=1 to my boot args. Not sure why I have to do this, but it works.

 

I'm running 19,1 with enabled intel igpu. I'm injecting "AAPL,ig-platform-id" = <0300983e> to configure headless mode for the igpu.

 

Anyone know why I have to use that bootarg (shikigva) to make DRM work? I'm running on an AMD 560. Just want to make sure I'm not compromising something else by running that setting - DRM playback is not THAT important to me, but would like to have it working.

Same here.  Had to use the shikigva=1 flag to get DRM+ content to play in Apple TV+.  This is after a fresh install of the newly uploaded EFI for RX/F11/19,1.

 

Question, any reason why the EFI doesn't include the VirtualSMC.efi driver?  I manually dropped it in my driver folder seeing that the VirtualSMC kext is being utilized.

Share this post


Link to post
Share on other sites
6 hours ago, hungrywallet said:

 

Question, any reason why the EFI doesn't include the VirtualSMC.efi driver?  I manually dropped it in my driver folder seeing that the VirtualSMC kext is being utilized.


VirtualSMC.EFI is not needed as it makes no difference if you use it or not  with my EFI so why have the extra UEFI file if you don’t need it?

one of the goals for when I put this EFI together was to keep the EFI as minimal as possible when it comes to drivers and kexts. The DSDT and SSDT do most of the work so my advise is to try my EFI as is instead of bloating with stuff that’s not needed but saying that if you like VirtualSMC.EFI in there then add away my friend  :) 

 

Update - A fresh boot of Catalina doesn’t need shikgvga=1 to get DRM+ to work on my system. I’m doing a fresh instal as a test and it’s perfect for me with the EFI exactly how it is with no changes needed. Have you used a different bios setup or something?

 

Edited by AudioGod

Share this post


Link to post
Share on other sites

Have switched over to SMBIOS for iMac 19,1 ( sidecar ) and still using AptioMemoryFix,  added slide=0 and all perfect with @AudioGod's latest EFI. New BIOS update F11 is fantastic, finally no more bloody runtime allocation errors.  Added some recent BIOS screenshots to mac OS Catalina guide.

Happy hackintoshing everyone!!! :thumbsup_anim:

Share this post


Link to post
Share on other sites

@glasgood I hope your good buddy, Could you do me a favour and expand your guide say its for the z390 pro and also the z390 master please? 

Everything is exactly the same with this board and your guide its just a different efi and dsdt so I made a new mini guide for it. :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By BuXb
      SleepOnLowBattery (“SOLB”)
      by BugsB, based on a script by Toggi3 * + more code snippets from the www
       
      For those of us whose HackBook (or even real MacBook) doesn't automatically and properly go into power saving mode on very low battery but just powers down coldly, crashing macOS: “SOLB”, a small and RAM/ CPU wise very low footprint AppleScript based utility that checks the battery level every 2 minutes, running via daemon in the background.
       
      You can choose between two versions, either with or without sound. Both display a notification in the top right of your screen.
       
      Between ≤10 and >8% battery charge:

       
      Between ≤8 and >5% battery charge:

       
      On ≤ 5% battery charge you will see a 10 seconds countdown dialog box in 1 second intervals:

       

       
      which you can cancel, or have your your *ac*Book be sent to sleep when down to 0.
       
      The version with sound uses the pleasant macOS US female voice Allison. If the lady is not installed, you can download "her" via System Preferences, Accessibility, Speech (pane tab should get opened by the install script), click onto the two arrows to the right of System Voice, Customize, English (Unites States) -- Female, activate Allison, OK (macOS downloads voices to /System/Library/Speech/Voices - Allison consumes 120 MB).
       
      If you want to see/ see and listen first, disconnect your Mac from its power supply and double click the “run Demo” file in either folder, with or without sound.
       
      The launcher is installed per user, so one user can use the script with and another user the script without sound.
       
      Run your desired install.command, with or without sound. The script should be active right away without restart.
       
      Regarding the sound version, you can also:
      - download any other English voice of your liking and edit the name inside the script at the very top
      - download any language voice and translate the text inside the script
      Edit with Apple Script Editor, save, install, reboot.
       
      Tested working in macOS High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.1.
      Please feedback if this utility also works for you.
       
      If you have ideas, experience bugs, etc., please contribute as precise, succinct, productive and friendly as possible. In case of a bug, always include your version of macOS for me or others to try and help. Thank you.
       
      ENJOY
       
      VERSION HISTORY:
      2019-11-15 v. 1.1
          •    BUG FIX: changed all occurrences of ExternalChargeCapable to ExternalConnected in all Apple Script .scpt files (SleepOnLowBattery.scpt, SleepOnLowBatterySound.scpt, demo.scpt) to restore functionality
          •    IMPROVEMENT: made queries of MaxCapacity and CurrentCapacity more compatible to work with hopefully any system
          •    NEW: added Catalina compatibility to install scripts; verified Mojave compatibility
          •    NEW: Sound script uses voice Allison if installed, otherwise automatically defaults back to another English standard voice (Daniel, Alex or Fred)
       
      2018-11-10 v.1.0
          •    initial version
       
      IDEAS TO IMPLEMENT IN FUTURE RELEASES:
      Have the sound version install script check if Allison is installed, and if not, offer to download and install it. Purely cosmetic: find a way to have the display notification in the top right of the screen not display the Script Editor icon but the one of the utility without turning the utility into an app but by maintaining a script to keep the load footprint low. This is currently neither possible with an Apple Script nor with an Apple Script Bundle file, only with the script compiled into an app. One possibility might be a Perl approach, if someone volunteers. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      * Thanks to Toggi3 for the base script:
      https://hints.macworld.com/article.php?story=20110219013713667
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      THE CODE (of the version with sound):
      install.command:
       
      LaunchAgent SleepOnLowBatterySound.plist:
       
      Script SleepOnLowBatterySound.scpt:
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       
      SleepOnLowBattery (SOLB) by BugsB v.1.1 (2019-11-15).zip
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&amp;t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By kelvin henrique
      Faz pouco menos de uma semana que estou tentando dar boot usando um pendrive no lenovo g40-80, mas todas as vezes que tento algum kernel panic diferente acontece, não entendo tanto de hackintosh mas pelo que li tanto aqui no forum quanto em outros sites me fizeram constatar que talvez o erro seja falta de kexts, alguem possui os kexts para esse notebook ??
       
      primeiro erro que tive era porque estava usando um pendrive de 8gb, o recomendado é 16 no minimo pelo oque vi, fui la, comprei um de 32, mudou o kernel panic mas era só um dos erros resolvidos.
       
      especificações dele:
      Processador: Intel Core i3-5005U
      Grafico: Intel HD Graphics 5500
      originalmente ele vinha com um hd de 500gb e 4gb de ram, mudei pra um ssd de 128gb e 8 gb de ram
       
      ja percebi que unico problema desse notebook é que a placa de wifi não vai funcionar, mas quanto a isso não tem problema pois se conseguir mesmo instalar o mac eu comprou outra
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Master using bios revision F10, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII, 5700, 5700 XT
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
       @glasgood Has kindly put together a new simple Catalina install guide so Just Follow He's Guide For a Perfect Install. (glasgood put the guide together for the Z390 Pro but the two boards are so alike that you can follow this guide with no problems at all using the Z390 Master)
       
       
      HARDWARE USED
      • Intel I9 9900k @5.1Ghz
      • Gigabyte AORUS Z390 MASTER
      • Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • EK Custom Liquid Cooling Loop
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       

       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
      • Sidecar (only works using the iMac19,1 EFI and with your igpu Enabled)

       
      CLOVER EFI FOLDERS  
      please note - You must flash your Z390 MASTER bios to revision F10 to use any of these EFI's, The DSDT is not designed for any other Bios revision
      mb_bios_z390-aorus-master_f10.zip - Z390 MASTER Bios Revision F10
       
      Use this folder with igpu Enabled in bios for working Sidecar (Updated 1st Nov)
      AudioGods Z390 Master Vega Navi EFI.zip - Vega 56/64 Navi & Radeon VII DSDT
      AudioGods Z390 Master RX EFI.zip - RX Series DSDT
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these DSDT's)

       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&amp;t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      mb_bios_z390-aorus-master_f10
      Clover
      Clover Configurator
      Kext Updater
      RepairPermissions
       
       
      OPTIONAL DOWNLOADS
      BroadcomFix.zip   (Use these kexts if your Broadcom bluetooth/Wifi isn't working properly)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press Delete → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • Boot -> Windows 8/10 Features -> Other OS
      • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first)
      • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1
      • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice)
      • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled
      • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot
      • Settings -> IO Ports -> Internal Graphics -> Enabled
      • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M
      • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M
      • Settings -> IO Ports -> Aperture Size -> 512MB
      • Settings -> IO Ports -> Wifi -> Disabled
      • Settings -> IO Ports -> Audio Controller -> Enabled
      • Settings -> IO Ports -> Above 4G Decoding -> Disabled
      • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled
      • Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled
      • Settings -> Platform Power -> Platform Power Management -> Enabled
      • Settings -> Platform Power -> ErP -> Enabled
      • Settings -> Platform Power -> RC6(Render Standby) -> Enabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       
       
×