ho un problema con un monitor Dell p2715q 4k, funziona bene a prima vista, ma quando lavoro su programmi piu' pesanti, ho qualche problemino , del tipo che su certe azioni risulta rallentato a livello grafico. Invece se ridimensionato il monitor alla risoluzione nativa (3840x2160), sembra che questo problema sparisca. In pratica ho problemi solo nelle dimensioni intermedie. sapete se si puo' fare qualcosa? Il problema credo sia dovuto al monitor e non alla scheda video, perche' su un monitor full hd non ho problemi di rallentamento.
Per ora sto usando solo Lilu e wahtervergreen , senza questi il monitor nemmeno si accende.
I am asking you with a great request for help with a problem I can not deal with.
I hope I have chosen a good section on this topic
I have been using my Hackintosh for some time now
it does not cause me any more problems except for the one that irritates me
the system does not recognize my monitor and detects it as a
monitor monitor VGA
13,9'' (800 x 600)
Gigabyte GeForce 9600 GT 512 MB
My monitor model: LG Flatron W2243S
As you can see in the attached picture, the system does not recognize the monitor as a built-in screen
My main problem is that when the screen resolution is set to 1920x1080, black bars appear on the sides of the screen
It is not very comfortable, that's why I would like to change it and make the image look the whole width of the monitor
The monitor is connected to the graphics card with an adapter from the VGA connector to the DVI connector
this is my conifig.plist
I hope that I described my problem in a comprehensible way, thank you very much for your help
I am new, I hope I am posting in the correct forum.
My specs: Processor: Core i5 6500 Skylake 3.2ghz
Mobo: Gigabyte h170-d3h
M2SSD: WD Black 256gb PCIe (Mac OSx)
SSD: Samsung 860 Evo (WIndows 10)
HDD: WD Blue 1TB
GPU: Radeon RX 480
Monitor: BenQ RL2460 24"
I was able to install High Sierra on a new m2 drive, that I added to the above configuration with windows 10 already installed.
I had a few issues during install, including the monitor turning off at boot screen.
Unfortunately, this persists even now. It turns off at about 60% of the progress bar, and to turn it on again I have to unplug/plug back my hdmi.
Additionally, while all of the usb ports worked during install and while running it out of the clover I had on the usb stick, only the rear ones appear to work now.
The audio doesn't work either, though I added the correct patch according to my mobo
Lastly, my other drives are not recognized in the bios anymore. They run fine from boot override but they don't show up in the boot priority (while multiple entries of mac OS do, and they seem to increase in number at every reboot)