Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kushwavez
      Acer Aspire V15 V5-591G - macOS Sierra 10.12.6 - Big Sur 11
      Running Big Sur 11.0.1!
      (Sierra, High Sierra and Mojave needs "SATA-100-series-unsupported.kext" and unmodified "AirPortBrcmFixup.kext")
       
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      Motherboard: USOPP_SLS (Skylake-H PCH) BIOS: Insyde Corp. v 1.15 CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake) GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530 RAM: 16 GB DDR4 (2x 8 GB SAMSUNG 2133 MHz) WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth) Audio: Realtek HD Audio: ALC 255  Ethernet: Realtek RTL8168/8111 Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW) Webcam: HD Webcam HDD: TOSHIBA 500 GB HDD SSD: KINGSTON A2000 NVMe PCI-e SSD (if you want Windows dual-boot then you need M.2 SATA SSD since NVMe will not work on Windows due interfering with NVIDIA GTX 950M (bluescreen when loading drivers)) Display: 1366x768 (15.6", Matte) Battery: 6 cell 56Wh / 5040mAh Connectors:  1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard. Working:  
      Wi-Fi (with BCM94352Z) Bluetooth hand-off (With BCM94352Z) Full Graphics Acceleration Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color) HDMI & VGA Outputs Audio  Ethernet  App Store, Messages, FaceTime, Siri, iCloud Integrated webcam 3.0 USB Touchpad and Keyboard (with working gestures and Fn+Brightness keys) Battery info Sleep Mode NVMe PCI-e x4 SSD Power Management Hardware decoding/encoding (up to HEVC) Not working:
      Original Wi-Fi (Qualcomm Atheros QCNFA344A):  Only Bluetooth is working, Wifi is unsupported, changed to Broadcom BCM94352Z NVIDIA GeForce GTX 950M: Optimus not supported. Card Reader: Unsupported For Wi-Fi:
      1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it 2nd and best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo, BrcmPatchRAM3, AirportBrcmFixup kexts they're all in my attached zip). Or buy BCM94360NG for OOB support. You could buy these cards from ebay, aliexpress, or amazon Issues:
      - Sometimes Combo Jack audio is not working after sleep
      Not tested:
      - Hibernation
      - FileVault
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
       Download the install zip (bootpack & postinstall):  Click here (v5126) -> Acer_Aspire_V5-591G_Clover_v5126.zip (Tested: Sierra 10.12.6 -> macOS Big Sur 11.0.1)
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia, gibMacOS - Windows: Transmac, Vmware, Win32diskimager, gibMacOS)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.plist" -> you'll have more informations about the freeze
      - To disable SIP boot with "config_debug.plist"
       
      Please open the README.pdf in my install zip for more informations about the USB Installer & Post installation!
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict> Before updating to a new version of macOS please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
      Here some pictures:

       
      Running fine on Big Sur 11.0.1 
       

      Finally a fully working touchpad.
       
      Sierra 10.12.6
       
      High Sierra 10.13.6
       
      Mojave 10.14.6
       
      Catalina 10.15.7
      macOS & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
            5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      IF YOU CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      It's because your EFI is not 200 MB or not an "Apple" original EFI,  but don't worry, try another EFI mounter, or mount from terminal (I used EFI Mountain Show: Getting errors, but you can mount and use without problem) You also could "mount" the EFI from Windows: 1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ in administrator mode to manage EFI
      remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ in administrator mode to manage EFI
      mountvol b: /d (This will unmount your EFI) Useful Applications for Mac:
      EFI Mountain Show -> To easily mount your EFI Clover Configurator -> To easily manage your config.plist https://mackie100projects.altervista.org/download-clover-configurator/ PlistEditPro -> Advanced plist editor https://www.fatcatsoftware.com/plisteditpro/ iStat Menus -> To monitoring your devices https://bjango.com/mac/istatmenus/ Boom 3D -> To significantly increase your audio quality https://www.globaldelight.com/boom/ TextMate -> a basic code editor just like Notepad++ on Windows https://macromates.com Modified Wineskin to run basic Windows 32-bit or 64-bit (or DX9 games) applications on Catalina -> https://www.reddit.com/r/MacOS/comments/fobx5t/i_didnt_want_to_boot_windows_every_time_when_i/ CrossOver 20 -> Run DirectX 11 applications on Catalina=< https://www.codeweavers.com/crossover/ MaciASL -> View/Edit your .aml, .dsl files https://bitbucket.org/RehabMan/os-x-maciasl-patchmatic/downloads/ Hackintool -> All useful info, tools in one place https://github.com/headkaze/Hackintool IORegistryExplorer V2.1 -> To view your IO tables https://github.com/vulgo/IORegistryExplorer/releases/tag/v2.1 App Cleaner -> To delete your apps with caches https://freemacsoft.net/appcleaner/ Intel Power Gadget -> To see your frequencies https://software.intel.com/en-us/articles/intel-power-gadget Carbon Copy Cloner -> Advanced macOS drive backup utility https://bombich.com Commander One -> A Total Commander alternative for macOS https://mac.eltima.com/file-manager.html  
      Useful Applications for Windows:
      Total Commander -> To easily manage EFI https://www.ghisler.com mountvol b: /s -> To mount your system drive EFI EasyUEFI -> To manage boot orders and any bootloaders with ease https://www.easyuefi.com/index.html MiniTool Partition Wizard -> To mount your USB EFI, and manage other drives https://www.minitool.com/partition-manager/ Notepad++ -> Basic code editor for all type of files https://notepad-plus-plus.org gibMacOS -> A python script for downloading/creating macOS Internet Recovery USB from Windows (working internet is needed when installing) https://github.com/corpnewt/gibMacOS  
       
      Notes:
      For Sierra, High Sierra, Mojave you need to download and use the full AirPortBrcmFixup.kext for WiFi, and replace CtlnaAHCIPort.kext with SATA-100-series-unsupported.kext for AHCI Sata drives For Sierra only you need to replace SMCBatteryManager.kext with ACPIBatteryManager.kext for working Battery indicator  
      Changelog:
      2020.11.12: Touchpad now fully functional with gestures, Patched Fn+Brightness keys (Fn+Left, Fn+Right), repatched DSDT, changed SMBIOS to MacBookPro13,1 for better support, fixed CPU Stepping, fixed some wrong lines in config.plist, updated to Big Sur release, updated bootpack, updated guide. 2020.11.03: Tested macOS Sierra, High Sierra, Mojave, Catalina, Big Sur, updated guide 2020.11.01: Initial upload
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      El Capitan 10.11.6 -> Big Sur 11 - Windows 10
       
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound (all ports) USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) ASUS HyperKit and M.2 with a KINGSTON NVMe SSD - 250 GB Hardware decoding/encoding on both HD 530 and RX 5700 (HD 530 up to HEVC, RX 5700 at the time of writing VP9) iGPU only (with QuickSync) is used in the default config.plist To use dGPU for hw decode/encode and also use Intel QuickSync you need to start with "config_headless.plist" This will use iMac17,2 SMBIOS and shikigva=80 To use dGPU only boot with "config_amd.plist" also disable iGPU completely in BIOS. This will use iMacPro1,1 SMBIOS without iGPU System Integrity Protection is Enabled by default. If you need to boot with SIP disabled you may use "config_debug.plist" or disable it manually in Clover settings. If you want Enabled SIP but with allowing unsigned kexts you may boot with "CsrActiveConfig = 0x01"  
      What is not working:
      -  
       
      Not tested:
      Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: (This is for HD 530 in headless) Primary Display: Auto (to use dGPU only this must be PEG) iGPU Multi-monitor: Enabled (to use dGPU only this must be Disabled) RC6(Render Standby): Enabled (to use dGPU only this must be Disabled) DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5126): Click here -> Z170-DELUXE_Clover_v5126.zip (Tested: El Capitan 10.11.6 -> macOS Big Sur 11.0.1)  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia, gibMacOS - Windows: Transmac, Vmware, Win32diskimager, gibMacOS) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:

       
       



       
      El Capitan 10.11.6
       
      Sierra 10.12.6
       
      High Sierra 10.13.6
       
      Mojave 10.14.6
       
      Catalina 10.15.7
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Useful Applications for Mac:
      EFI Mountain Show -> To easily mount your EFI Clover Configurator -> To easily manage your config.plist https://mackie100projects.altervista.org/download-clover-configurator/ PlistEditPro -> Advanced plist editor https://www.fatcatsoftware.com/plisteditpro/ iStat Menus -> To monitoring your devices https://bjango.com/mac/istatmenus/ Boom 3D -> To significantly increase your audio quality https://www.globaldelight.com/boom/ TextMate -> a basic code editor just like Notepad++ on Windows https://macromates.com Modified Wineskin to run basic Windows 32-bit or 64-bit (or DX9 games) applications on Catalina -> https://www.reddit.com/r/MacOS/comments/fobx5t/i_didnt_want_to_boot_windows_every_time_when_i/ MaciASL -> View/Edit your .aml, .dsl files https://bitbucket.org/RehabMan/os-x-maciasl-patchmatic/downloads/ Hackintool -> All useful info, tools in one place https://github.com/headkaze/Hackintool IORegistryExplorer V2.1 -> To view your IO tables https://github.com/vulgo/IORegistryExplorer/releases/tag/v2.1 App Cleaner -> To delete your apps with caches https://freemacsoft.net/appcleaner/ Intel Power Gadget -> To see your frequencies https://software.intel.com/en-us/articles/intel-power-gadget Carbon Copy Cloner -> Advanced macOS drive backup utility https://bombich.com Commander One ->A Total Commander alternative for macOS https://mac.eltima.com/file-manager.html  
      Useful Applications for Windows:
      Total Commander -> To easily manage EFI https://www.ghisler.com gibMacOS -> A python script for downloading/creating macOS Internet Recovery USB from Windows (working internet is needed when installing) https://github.com/corpnewt/gibMacOS mountvol b: /s -> To mount your system drive EFI
      EasyUEFI -> To manage boot orders and any bootloaders with ease https://www.easyuefi.com/index.html
      MiniTool Partition Wizard -> To mount your USB EFI, and manage other drives https://www.minitool.com/partition-manager/
      Notepad++ -> Basic code editor for all type of files https://notepad-plus-plus.org
       
      Notes:
      No need to change anything inside Clover from El Capitan to Big Sur For macOS Mojave and older you might need the full AirPortBrcmFixup.kext for full WiFi support   
      Changelog:
      2020.11.12: Noticed that the CPU is always at 4200 Mhz, created an SSDT for proper CPU stepping. Updated to Big Sur release version, updated bootpack
      2020.11.03: Tested El Capitan, Sierra, High Sierra, Mojave, Catalina, Big Sur
      2020.11.01: Updated bootpack to Clover v5126, ready for macOS 11 Big Sur final release
      2020.04.23: Corrected layout-id to use all audio ports, updated bootpack
      2020.04.22: Deleted unnecessary boot-args, can boot without any custom boot-args (except agdpmod=pikera for RX 5700), updated bootpack
      2020.04.20: Deleted unnecessary lines from config.plist, updated bootpack
      2020.04.17: Replaced FakeSMC with VirtualSMC because FakeSMC is outdated (to see your frequencies use Intel Power Gadget) -> Removed unnecessary kexts, Updated all necessary kexts, updated Clover to v5112, updated bootpack, enabled SIP, deleted bootcamp theme
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By lizdav
      Hi,
       
      I would like to ask for some advice or help even.
       
      I have had some usability issues in the past with my hackintosh so I installed Mojave for the second time but it keeps producing the same exact problem. Most of the time the system stutters and lags after login. The app icons just bounce if I want to open them and even if it does it takes forever. Another thing I picked up on is that it seems like there's no internet access whenever this occurs. The problem ceases after like 2-3 restarts and everything is back to normal. 
       
      What could cause an issue like this? I had the same thing happening with my previous install but I thought that was because of unnecessary kexts I left in the EFI. I only have the bare minimum required this time so I'm kinda lost.
       
      Computer specs:
       
      Mobo: Gigabyte B360M D3H
      Graphics: Radeon Vega 64 8OC
      CPU: Intel i7 8700k
      Ram: 32 Gig
      SSD: Samsung Evo 860 250gb
       
      I also have a separate HDD with Windows 10 installed for gaming purposes. I would greatly appreciate any kind of help, thanks in advance!
       
      –David
       
       
      config.plist
    • By Forzenny
      Hi there,
       
      I managed to install Mojave on my MSI GP62-6QE laptop with somewhat success. The only annoying thing left is that everytime I shut it down it seemingly kernel panics and I get the "Your computer has restarted because of a problem" at startup.
       
      I tried many different things such as removing emuvariablesuefi64, checking FixShutdown in CloverConfig but it seems the NVRAM is causing this issue.
       
      I have deleted the nvram file from the EFI partition but it seems stuck somewhere else, I can't clear out the nvram from the terminal or in single user mode as it returns a "Not permitted" error.
      Clearing out the nvram by pressing F11 at the boot menu screen works however.
      crashlog.rtf
    • By Cyberdevs
      Mac mini 2018 Hackintosh
       
      This guide will help you setup macOS Mojave on your Gigabyte BRIX GB-BSi3H/GB-BSi5H/GB-BSi7H series.
       
       
      The best macOS version that works flawlessly is macOS Mojave which you can get almost everything to work with not much effort.
       
      Main Specs:
      CPU: Intel® Core™ i3-6100U2.3GHz
       
      Memory: 2 x SO-DIMM DDR3L slots (DDR3 1.35V) 1600MHz Max. 16GB
       
      LAN: Gigabit LAN (Intel i219V)
       
      Wifi Card: Intel® Dual Band Wireless-AC 3165
       
      Graphics: Intel® HD Graphics 520
      HDMI Resolution (Max.) 4096 x 2160 @ 24Hz
      Mini DP Resolution (Max.) 3840 x 2160 @ 60Hz
       
      Audio: Realtek ALC255
       
      Expansion Slots:
      1 x M.2 slot (2280_storage)
      1 x PCIe M.2 NGFF 2230 A-E key slot occupied by the WiFi+BT card
       
      Front I/O:
      2 x USB 3.0
      1 x head phone Jack
      1 x Mic phone Jack
       
      Rear I/O:
      1 x HDMI (1.4a)
      1 x Mini DisplayPort (1.2)
      2 x USB 3.0
      1 x RJ45
      1 x DC-In
      1 x Kensington lock slot
       
      Storage:
      Supports 2.5” HDD/SSD, 7.0/9.5 mm thick (1 x 6 Gbps SATA 3)
       
       
      My Specs:
      Intel® Core™ i3-6100U2.3GHz Processor
      8GB PC3L-DDR3 RAM (2x4GB Samsung Memory Modules)
      1 Plextor 250 GB M.2 SATA SSD Disk Drive
      1 Samsung EVO 860 500 GB SSD
       
       
      What works:
       
      USB ports:
      All 4 USB ports work perfectly fine with no need for using the custom SSDTs.
       
      Audio:
      Realtek ALC255 Audio codec works with AppleALC.kext (with Lilu) using Layout-id=11 (Thanks to the acidanthera developers (AKA dortania)
      (you can also use these layout-ids: 11, 13,15, 86)
       
      Lan:
      Intel Gigabit LAN (Intel i219V) works with IntelMausiEthernet.kext (Thanks to @Mieze) and IntelMausi.kext fork by acidanthera
       
      Graphics:
      Intel HD 520 works with Whatevergreen.kext
       
      Wi-Fi and Bluetooth:
      Intel Bluetooth works OOB
      macOS Mojave almost supports everything except for Intel Wi-Fi card which can be fixed with itlwm.kext and Heliport application which were developed by OpenIntelWireless project developers (thanks guy/s or gal/s)
       
      Here is the list of supported Intel Wi-Fi adapters that will work with itlwn.kext and Heliport.
       
      About activating the Wi-Fi you need to run the Heliport application which replaces macOS’s built-in Wi-Fi menu and you can scan and connect to all the available Wi-Fi networks around you.
      You need to add the Heliport.app to “Login Items” under the Users & Groups in System Preferences for it to load with macOS.
       
      Another issue with the Intel Wi-Fi and the macOS that I encountered is that the Signal Strength drops but it hasn’t disrupt my network connectivity so far so it could be a bug.
       
      Sleep works fine with macOS Mojave but I had no luck getting it to work on Catalina and Big Sur (I didn't even try that hard to get it to work anyways because I like Mojave better lol).
       
      What not works:
      The only thing that doesn’t work is the AirDrop which is because of the Intel Bluetooth and Wi-Fi and if you replace the Wi-Fi+BT card with a supported Broadcom adapter will work eventually.
       
      Here is the list of macOS Compatible Wi-Fi adapters (thanks to dortania group for the details list)
       
       
      Thanks to the Clover Bootloader's developers; Thanks to the acidanthera team and everyone else in the Hackintosh community for their hard work and support.
       
      Here is the EFI folder with Clover r5121:
      Gigabyte Brix Mojave Clover r5121.zip
×