Jump to content

4 posts in this topic

Recommended Posts

Hello,

 

I have installed OSx86 10.11 (El Capitan) on April 2016 on my Asus Z170 Deluxe system.

 

For installation I used this Thread.

 

I used it a lot and it worked well. Meanwhile I switched to Linux and I use Win10 time to time. So OSX was forgotten. Also it did not boot correctly anymore.

 

Now I wanted to start with a fresh installation and use OSX more often again. I want to use OSX 10.13 High Sierra. Is it working on my Asus Z170 Deluxe? I have the same Hardware as of April 2016 only the graphics card was updated to a Nvidia GTX1080.

 

My Hardware in detail: Asus Z-170-Deluxe (Bios 3801), i7-6700k, EVGA GeForce GTX 1080 SC GAMING ACX 3.0, Samsung 950 Pro/M2 NVME 512MB, HDD 4 TB)

Can I use some of support files from the old thread for the installation (see attachment)? Can I still use  Clover 2.3k r3292 Special Edition v2 ? Or do I need a newer version?

 

Has someone installed High Sierra successfully on the Asus Z170 Deluxe ?

 

About some hints where to start I would be thankful.

 

regards

JackBauer24

 

Z170DeluxeFiles.zip

Edited by JackBauer24

Share this post


Link to post
Share on other sites
Advertisement

@MaLd0n: Thank you for the hint how to start the installation.

 

I have successfully installed High Sierra on my SSD with the Olarila Image. Booting the system with USB-stick is also working.

Now I am a bit confused installing Clover on my SSD. Is it correct to install Clover on the "Macintosh HD"? I can't remember how I have done it in 2016 with El Capitan.

The Clover Configurator shows the "EFI on Windows 10, APFS Container [Macintosh HD]" entry were my old Clover version v2.3k r3224 from 2016 is installed.

This EFI partition is mounted but I can't see it in the Clover Installer or select it as destination. As reference I have attached the Clover installation-log from the 10.11 installation in 2016.

Can I simply overwrite the "Clover-" and "Boot-" folder on my EFI Partition to update the Clover installation? I am afraid of modifying the Clover installation on my EFI Partition until the PC doesn't boot with boot manager anymore.

 

What must I do to install it correctly?

 

clover_install_1.jpg

clover_install_2.jpg

efi_partition_cur_old_clover.jpg

efi_contents_clover.jpg

old_clover_install_log_2016.jpg

mac_disk_info.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By TimothyF
      My steps so far:
      Set up Catalina install USB exactly according to Plain Vanilla guide. Disconnect my Windows drive in PC, so that only the empty Hard Drive is connected to Motherboard. Boot to USB, select Install Catalina option. BIOS set to UEFI, Safe mode Off. Always get stuck at the same IOconsoleUsers: GIOScreenLockState point. Tried -radvesa, -radoff, nv-disable=0 boot options (separately), and disabling BIOS virtualization (vt-d) -> NO luck. This from the top search result https://www.reddit.com/r/hackintosh/comments/b5a6ry/ioconsoleusersgioscreenlockstate_3_blackscreen/  
      Screen pics attached. Here are the last couple of lines that could be important:
      GTrace synchronization point 4
      Unsupported CPU
      Unsupported PCH
      Adding ADGP mode validate property
      hmm.. mismatch sizes 3100 vs 20
      IOConsoleUsers: time(0) 0->0, lin 0, llk 1,
      IOconsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0
       
      Please give me some ideas what else might work. Thank you.


       
       
      Other details of Clover and Desktop PC below:
       
      Clover USB specs OS installer used: Catalina (10.15) Clover revision: 5103 Kexts included: ATH9KFixup.kext AppleALC.kext Lilu.kext RealtekRTL8111.kext USBInjectAll.kext VirtualSMC.kext WhateverGreen.kext config.plist: config.plist ------------------------------------------ Target Desktop specs: Dell Inspiron 3847 (64 bit) CPU: Intel Core i5-4460, 3.2 GHz, 4 cores Architecture: Haswell GPU: Intel HD 4600 Motherboard: Dell 088DT1 (version A01) Chipset: Intel H81 Install method: with USB, configured with Clover, 100% following Plain Vanilla guide for Desktops RAM: 12 GB, 2 slots Hard drive for installation: SATA HDD 4TB, by HGST LAN: RTL8111/8168/8411 WLAN: AR9565 (atheros) Audio: Realtek ALC661 (not 100% sure this is correct)  
    • By MaLd0n
      Install MacOS with Olarila Image, Step by Step, Install and Post Install  
      https://www.olarila.com/topic/5794-hackintosh-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Install Sierra/High Sierra and boot into system!   Post Installation   --Paste my EFI folder into EFI partition  EFI GA H110M-S2.zip     --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.GA H110M-S2.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By cixque
      CLOVER.zipCLOVER.zipDell Venue 11 Pro 7140
      ------------
      Specification
       
       
      Intel Core M 5Y71
       
      Intel HD Graphics 5300
       
      Intel Broadwell-U motherboard
       
      8GB Ram
       
      256GB SSD
       
      Dell DW1850e WWAN + GNSS GPS
       
      Intel Wireless 7265 + Intel Bluetooth
       
      NFC
       
       
      …..
       
       
       
       
       
      Mojave 10.14.6
       
      What works
      Native Power Manager (Generate Plugin type) Full Graphics with QE/CL Brightness (Add PNLF in Config.plist or DSDT Patch) — (Brightness slide bar) Touch Screen, and Pen (DSDT Patch + Voodoo I2C, I2CHID satellite KEXT) HDMI output with hot plug (Lilu + WhateverGreen) HDMI Audio with hot plug (Lilu + AppleALC) no Layout-id needed Front and Rear Cameras MicroSD slot - O2 Micro (I use Adding Arbitrary under Devices in Config file Method) Ref, Post #6 by Jake Jo https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/ Battery Indicator (ACPIbattery by Rehabman) ——>To utilise both battery, SSDT (by Rehabman) is needed in order to combine 2 batteries as one.
      Travel Keyboard Dell K12a001 (USBinjectall KEXT) Native Keyboard keys (Brightness, volume keys) WWAN card Dell DW1850e (OOB) Bluetooth -------------------
       
      What doesn’t work
       
       
      Sleep Wake — I have no idea how to fix it as it is required DSDT patch I guess. GPS NFC Audio ---> Realtek I2S Audio (PG0.35 for DELL)
       
      In DSDT entries is HDAUDIO\\FUNC_01&VEN_10EC&DEV_0282&SUBSYS_00000000&REV_1000\ Which indicates ALC282
       
      Audio ALC3263 (As it shown in BIOS) - Broadwell rt286 - Card1/Codec#0 (Utilised in I2S Mode) there is nowhere in BIOS to change to HDA mode). Drop OEM HDA and Fix HDA don’t do anything, still show 3 HDMI Audio outputs. If there is a DSDT patch to force HDA Audio mode, Please do enlighten me.
      As a result Internal Speaker, Internal Mic, and Headphone Jack doesn’t work.
       
      Touchpad on Travel Keyboard Dell K12a001 (Should work with DSDT Patch with pin configuration) I have no idea how. Obviously, Intel Wireless 7265 AC. For experimental purpose. https://github.com/daliansky/XiaoMi-Pro-Hackintosh/issues/330 — Knock yourself out. I managed to get it work for awhile but the real problem is kernel panic so I gave up. Ordering compatible card instead. ------------------
       
      Config.plist got it from Rehabman laptop config.
       
       
      BIOS version A20
       
      Enable:
       
      - Legacy Boot Rom
       
      Disable:
       
      - Secure Boot
       
      - TPM 2.0
       
      - Vt-d
       
      ------------
       
      SMBIOS - I use MacBook8,1. —- MacBookAir7,1-7,2 (Min Freq is at 1.2 GHz) MacBookPro12,1 Min Freq is at 800 Mhz and it is the default this cpu should be. Again, there is a way to set it right somewhere in this forum.
       
      ------------
       
      -->> DSDT Windows 8 patch
       
      System sees only one I2C Controller which control Touch Screen.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      -->> DSDT Windows 8.1 Patch
       
      System sees two I2C Controllers which control Touch Screen and Accelerometer.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      OOO>>> With Windows 8.1 patch which it should run with this one because it can see more of HID devices and controllers.
       
      Problem is Accelerometer (SHUB).
      Device can automatically rotate screen as it should be BUT it flips the screen wildly even with slightly movement. It stops only when device stays completely still. Eventually it breaks internal screen graphic. It becomes grabble. I restored internal screen graphic by connecting it to external monitor and set rotation of external screen to 0 degree. Then it is back to normal. (I guess it conflict with rotation setting) I disable SHUB in DSDT.
       
      ---------------------
       
      During Installation process Full Graphic acceleration can be activated straight away by Lilu and Whatevergreen. AppStore, iMessage and, FaceTime activate by NullEthernet and SSDT by Rehabman USBInjectAll needed for keyboard and other usb peripherals. Use other tool to keep certain ports active as Rehabman mention this KEXT is not good for a long run. Please do Correct me if I did something worng. Or any suggestions to make this thing runs better.
      CLOVER.zip
      IOReg_SysReport.zip
×