Jump to content
  1. vbmota

    vbmota

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DerNuntius
      Hi,
       
      Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
       
      Thank you for helping.
      Greedings,
      Hugo
       
       
      CLOVER.zip
    • By benmills1
      Hi, i can someone help me with installing mac OS Mojave on my HP ENVY - 15-as102na?
      I have an imac to use for setting up my usb & installing MacOS Mojave.There are various kext files etc that i'm not sure about and need some help as some are hardware specific.
      I tried previously but got stuck on an apple logo and couldn't get past that, and tried today and had problems with Clover.
      Once i get mac os on my 128gb m.2 ssd ( which i'll upgrade to either a 256gb or 512gb depending on how well this hackintosh works)
      I have a free 2.5" inch hdd bay where i'd like to install windows on in the future.
      I think i may have to replace my wireless card ( based on a few google results) which i'm fine with as long as i can see it working without just so i know i won't waste money
      Specs:
      Cpu: i5 7200u
      GPU: HD 620
      8GB ram
      Wifi card- Intel Wireless 7265 ( Intel® 802.11ac (2x2) )
      Motherboard - HP 81D2 & BIOS version is f.56
      https://support.hp.com/gb-en/document/c05311862
      Thanks
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/forum/download/file.php?id=25033
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By takeawaydave
      Running Mojave 10.14.6 (18G95) on a Dell Precision 7510 and trying to get all framebuffers working properly.
       
      The following CPU is being used: https://ark.intel.com/content/www/us/en/ark/products/89608/intel-xeon-processor-e3-1505m-v5-8m-cache-2-80-ghz.html
       
      The actual Device ID of the iGPU is 0x191D.
       
      There are the following graphical outputs:
       
      mDP
      HDMI
      Thunderbolt
       
      Clover 5058 (update to date at time of writing) is being used and up to date versions of Lilu 1.38, WEG 1.3.1
       
      Till now I've been running with the following config:
       

       
      with Model Name: MacBookPro13,3
       
      When using 191B:
       
      LDVS - Ok
      HDMI (no audio) : 1920x1080
      Thunderbolt (no audio) : 3440 x 1440
      no mDP
       

       
      191B-config-ioreg.zip is attached.
       
      When using 1912:
       
      No LDVS (as expected since this arrangement is targeted for iMac17,1
      HDMI (with audio): 1920 x 1080
      Thunderbolt (with audio) : 3440 x 1440
      no mDP
       
      1912-config-ioreg.zip attached
       
      Question:
       
      How can I get audio working as with 1912 on the 191B laptop config ? 
       
       
    • By ludufre
      Installing macOS Mojave 10.14.6 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      09/01/2019 15:57h GMT-0
      - Updated to 10.14.6.
       
      06/10/2019 00:44h GMT-0
      - Completely rewritten.
       
      10/17/2018 08:12h GMT-0
      - Fix Kexts permissions commands adjusted.
      - Removed FrameBuffer patch that is not needed.
      - Added audio solution and HDMI.
      - Unfortunately DisplayPort does not work.
      - Replaced Wifi/BT with DW1560 (BCM94352Z)
       
      10/11/2018 04:15h GMT-0
      - Added USB 3.0 patch.
      - Adjusted some steps.
      - Changed text formatting.
       
      10/11/2018 03:42h GMT-0
      - Added missing UEFI configuration.
       
      10/07/2018 00:36h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Not tested yet.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Make audio work.
      - Make HDMI audio work.
      - Test DisplayPort.
      - Make second ethernet work.
      - Replace Wifi/Bluetooth.
      - Test DP.
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover Configurator
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes. / 8 minutes with USB 3.0
       
       

      Install bootloader

      Download the CloverEFI (used 5058, from Automated Clover Builds) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended drivers (check all)
      - UEFI Drivers - Human Interface Devices (check all)
      - UEFI Drivers - FileVault 2 UEFI Drivers (check all, If you are going to use FileVault)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (if you are going to use NVMe)


       
       
      Make things works
       
      We'll make a full working flash drive, so follow these instructions:
       
      Will be mounted the EFI partition of the flash drive.
       
      Open the the /Volumes/EFI/CLOVER/config.plist inside this new partition with Clover Configurator (used 5.5.0.0)
       
      Important modifications
       
      config.plist
       
      ACPI Page
       
      - Check: SSDT - PluginType
       
      BOOT Page
       
      - Add: Arguments - darkwake=2
      - Check: Legacy - XMPDetection=Yes
       
      KERNEL AND KEXT PATCHES Page
       
      - Check: KernelPm
       
      RT VARIABLES Page
       
      - Change: CsrActiveConfig - 0x3E7
       
      SMBIOS Page
       
      - Change: Macmini8,1 - Mac mini (Late 2018) | Intel Core i7-8700B @ 3.20 GHz

       
      - Click: Generate New (few times in the two buttons)

       
       
      Need some Kexts in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext, ITEIT87x.kext and IntelCPUMonitor.kext inside of DMG version r240.
      - Download the Lilu.kext from here. I used the version 1.3.8.

       
      Intel UHD 630
       
      ACPI Page
      - Uncheck: Fixes - AddHDMI
      - Uncheck: Fixes - FixDisplay
      - Uncheck: Fixes - FixHDA
       
      GUI Page
      - Change: Screen Resolution - 3840x2160 (My monitor is 4K)

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the WhateverGreen.kext from here. I used the version 1.3.1.

       
      Audio ALC 1220 and HDMI audio

      BOOT Page
      - Add: Arguments - alcid=11

      DEVICES Page
      - Change: Audio - Inject - 11
      - Uncheck: Audio - AFGLowPowerState
      - Uncheck: Audio - ResetHDA

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the AppleALC.kext from here. I used the version 1.4.0.

       
      All USBs (2.0, 3.0, Type-C, internal)
       
      KERNEL AND KEXT PATCHES Page - KextsToPatch
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 1 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 2 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 3 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FF0F0F
      - Replace* [HEX]: 83FF3F0F
      - Comment: USB Port Limit Patch 4 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
       
      Need SSDT patch in the folder /EFI/CLOVER/ACPI/patched/
       
      - Download the SSDT-EC.aml, SSDT-UIAC.aml and SSDT-USBX attached bellow.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      LAN Cards
       
      Need a Kext for feach card in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the IntelMausiEthrenet.kext from here. I used the version 2018-1031.
      - Download the SmallTreeIntel82576.kext attached bellow. I do not remember where I found it.

       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: Periphelrals - Initial Display to IGP
      - Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Change value: Chipset - DVMT Pre-Allocated to 128M
      - Save & Exit Setup
       
      - Now, hold the F12
      - In the list, select your flash drive.
      - It will show twice. One with UEFI prefix and another without.
      - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "HD".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.6
       
      - Download and open latest CloverConfigurator
      - Open Mount EFI and click in Mount Partition in EFI Partitions list
      - Click in Open Partition that appears
      - Go to EFI -> CLOVER
      - Backup config.plist and ACPI folder to desktop
      - Go back and delete CLOVER folder
      (If you restart now you can't boot in macOS - DON'T RESTART)
      - Download latest Clover and install (link and config above)
      - Replace config.plist and ACPI folder from your desktop
       
      - Update Lilu.kext, AppleALC.kext, WhateverGreen.kext, HWSensors kexts (FakeSMC, ACPIMonitor, IntelCPUMonitor, ITEIT87x) in /Library/Extensions/
      - Run:
       
      sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i /  
       
      - Install macOS Update 10.14.6 and restart
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
       
       
      Z370N-WIFI v2.zip
×