Jump to content
fantomas

[pre-release] macOS Catalina

1,735 posts in this topic

Recommended Posts

Advertisement

Figured it out. Renamed EC0 via a Clover patch instead of through DSDT (where I had to rename a stack of matching entries to get the DSDT to compile).

 

Did anyone else lose their battery info in System Profiler after renaming EC0 to EC? I couldn't install the latest Catalina build until I did this and now my charge and cycle count values show "-1".

 

This is in Sierra and Catalina. Rolling back my previous DSDT with EC0 untouched fixes the problem, but breaks Catalina.

 

I'm using VoodooBatterySMC from the latest HWSensors from Slice (r241).

Edited by Riley Freeman

Share this post


Link to post
Share on other sites
8 hours ago, arsradu said:

@Andres ZeroCross Fixed it!! FINALLY!!!!!!

 

I was right when I said this happens with any SMBIOS and the fact that, with the same config, it just stopped working at some point.

 

But you were definitely right when you said Serial Ports! That option was enabled, and despite the fact that I don't remember giving much importance to that before with Catalina (when it worked), and despite the fact that, with the same option enabled, Mojave works just fine, THAT ACTUALLY FIXED IT! :)))

 

So yeah, it was an option in the BIOS, it wasn't the config, it wasn't the SMBIOS, and it looks like it is something that might have been recently added to MacOS, since it didn't happen with previous versions of Catalina (though I might have disabled that option before, without realising how important that was), and it definitely didn't happen with Mojave.

 

So yeah, to sum up:

1. SMBIOS change did nothing

2. fresh installation did nothing

3. setting the iGPU as primary, in my case at least, it didn't change anything.

 

What did make the whole difference, and I honestly didn't expect it to make all that difference, since to me it looked like the problem is iGPU related...not..serial ports related...was disabling Serial Ports in BIOS.

 

So yeah, a HUGE thank you to everyone for their feedback on this issue. You guys are awesome! :) 

 

Hello, I seem to have encountered the same problem as you. Can you elaborate on how you modified the BIOS settings?

Share this post


Link to post
Share on other sites
7 hours ago, xiaoM4095 said:

Hello, I seem to have encountered the same problem as you. Can you elaborate on how you modified the BIOS settings?

 

I'm not sure laptops have that option. So...I think in your case, the source of the issue might be different...? Do you get KP? If so, can you post the report you get after reboot? It might be different.

I think your issue might actually be related to the iGPU. Unless your experience says otherwise.

 

Anyway, this is for my desktop motherboard (and probably other desktop motherboards, as well). Similar naming.

IMG_0191_jpeg.thumb.png.8da6b84ef6cb0d7f333045d9729652c8.png

 

IMG_0192.thumb.jpeg.4ae0cbc6a91a46ee565e9f1d44949bae.jpeg

 

IMG_0193.thumb.jpeg.7bec3248ff405adda2a557b694942f60.jpeg

 

Edited by arsradu

Share this post


Link to post
Share on other sites
3 hours ago, xiaoM4095 said:

Hello, I seem to have encountered the same problem as you. Can you elaborate on how you modified the BIOS settings?


Set hibernatemode 0 for your Pmset,, 

And write detail your problem.

4 hours ago, Riley Freeman said:

Figured it out. Renamed EC0 via a Clover patch instead of through DSDT (where I had to rename a stack of matching entries to get the DSDT to compile).

 

Did anyone else lose their battery info in System Profiler after renaming EC0 to EC? I couldn't install the latest Catalina build until I did this and now my charge and cycle count values show "-1".

 

This is in Sierra and Catalina. Rolling back my previous DSDT with EC0 untouched fixes the problem, but breaks Catalina.

 

I'm using VoodooBatterySMC from the latest HWSensors from Slice (r241).


You can't just rename EC0 to EC in DSDT only,, some SSDT OEM have EC0 in their code. This will trouble you. So Rename EC0 to EC in config.plist is best solution (clover will rename all EC0 to EC in DSDT and SSDT OEM)

Share this post


Link to post
Share on other sites

I've noticed one difference here between Sierra and Catalina with the Clover EC0 rename patch. When I renamed EC0 in the DSDT AppleBusPowerControllerUSB showed up under the renamed EC in both systems. Now with the Clover patch it only shows up in Sierra, not Catalina.

Share this post


Link to post
Share on other sites
6 hours ago, arsradu said:

 

I'm not sure laptops have that option. So...I think in your case, the source of the issue might be different...? Do you get KP? If so, can you post the report you get after reboot? It might be different.

I think your issue might actually be related to the iGPU. Unless your experience says otherwise.

 

Anyway, this is for my desktop motherboard (and probably other desktop motherboards, as well). Similar naming.

IMG_0191_jpeg.thumb.png.8da6b84ef6cb0d7f333045d9729652c8.png

 

IMG_0192.thumb.jpeg.4ae0cbc6a91a46ee565e9f1d44949bae.jpeg

 

IMG_0193.thumb.jpeg.7bec3248ff405adda2a557b694942f60.jpeg

 

 

5 hours ago, Andres ZeroCross said:


Set hibernatemode 0 for your Pmset,, 

And write detail your problem.


You can't just rename EC0 to EC in DSDT only,, some SSDT OEM have EC0 in their code. This will trouble you. So Rename EC0 to EC in config.plist is best solution (clover will rename all EC0 to EC in DSDT and SSDT OEM)

I found the option you mentioned in the BIOS, but it has been disabled. Attach my panic report.

Anonymous UUID:       73E46EBA-13F5-C21A-BD7C-53473ED43527

Wed Sep 25 20:15:07 2019

*** Panic Report ***
Panic(CPU 2, time 57052043059): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0
RAX: 0x0000000000000000, RBX: 0x00000000fe036014, RCX: 0xffffff800b059cdf, RDX: 0xffffff800b059f74
RSP: 0xffffff811e7b3490, RBP: 0xffffff811e7b3500, RSI: 0xfffffe897e036014, RDI: 0x00000000fe036014
R8:  0x0000000000000000, R9:  0x00000000fffffffe, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000004, R15: 0x0000000000000000
RFL: 0x0000000000000087, RIP: 0xffffff800b059cf9, CS:  0x0000000000000008, SS:  0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff811f085f80 : 0xffffff800b065d7b mach_kernel : _interrupt + 0x12b
0xffffff811f085fd0 : 0xffffff800aee4d5d mach_kernel : _hndl_allintrs + 0x11d
0xffffff811e7b3500 : 0xffffff800b6ad2c9 mach_kernel : _serial_init + 0x679
0xffffff811e7b3510 : 0xffffff800b031b4a mach_kernel : _console_printbuf_clear + 0x7a
0xffffff811e7b3530 : 0xffffff800b031f39 mach_kernel : _cnputc_unbuffered + 0xe9
0xffffff811e7b3560 : 0xffffff800b032366 mach_kernel : _console_write + 0x296
0xffffff811e7b35a0 : 0xffffff800b031ab8 mach_kernel : _console_printbuf_putc + 0x68
0xffffff811e7b35c0 : 0xffffff800af5515f mach_kernel : ___doprnt + 0x9f
0xffffff811e7b36a0 : 0xffffff800b6044b1 mach_kernel : _IOLog + 0x131
0xffffff811e7b3850 : 0xffffff7f8f3e8fc7 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput19performFormatChangeEP13IOAudioStreamPK20_IOAudioStreamFormatPK18_IOAudioSampleRate + 0x2b
0xffffff811e7b38b0 : 0xffffff7f8ea13abd com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0x399
0xffffff811e7b3980 : 0xffffff7f8f3ebdfc com.apple.driver.AppleHDA : __ZN14AppleHDAStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0xb4
0xffffff811e7b39c0 : 0xffffff7f8ea1341d com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionb + 0x135
0xffffff811e7b3a50 : 0xffffff7f8f3e8e16 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput15initAudioStreamEv + 0x2b4
0xffffff811e7b3ab0 : 0xffffff7f8f3d8aac com.apple.driver.AppleHDA : __ZN14AppleHDAEngine12initHardwareEP9IOService + 0x21e
0xffffff811e7b3b10 : 0xffffff7f8f3e885d com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput12initHardwareEP9IOService + 0xf
0xffffff811e7b3b30 : 0xffffff7f8ea091d1 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOServiceP13IOAudioDevice + 0x111
0xffffff811e7b3b70 : 0xffffff7f8ea09087 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOService + 0x65
0xffffff811e7b3bb0 : 0xffffff7f8f3cc80b com.apple.driver.AppleHDA : __ZN14AppleHDADriver19activateAudioEngineEP13IOAudioEngineb + 0xf9
0xffffff811e7b3bf0 : 0xffffff7f8f3cd200 com.apple.driver.AppleHDA : __ZN14AppleHDADriver20activateAudioEnginesEv + 0xbe
0xffffff811e7b3c30 : 0xffffff7f8f3c7a7a com.apple.driver.AppleHDA : __ZN14AppleHDADriver18initHardwareActionEP9IOService + 0x316
0xffffff811e7b3c80 : 0xffffff800b63f5f8 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138
0xffffff811e7b3ce0 : 0xffffff7f8f3c7756 com.apple.driver.AppleHDA : __ZN14AppleHDADriver12initHardwareEP9IOService + 0x3c
0xffffff811e7b3d00 : 0xffffff7f8ea06588 com.apple.iokit.IOAudioFamily : __ZN13IOAudioDevice5startEP9IOService + 0x10e
0xffffff811e7b3d40 : 0xffffff7f8f3c95a2 com.apple.driver.AppleHDA : __ZN14AppleHDADriver13completeStartEv + 0x180
0xffffff811e7b3ed0 : 0xffffff7f8f3c9254 com.apple.driver.AppleHDA : __ZN14AppleHDADriver11startActionEv + 0xdc
0xffffff811e7b3f40 : 0xffffff800b63c8ae mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e
0xffffff811e7b3f80 : 0xffffff7f8f3c9132 com.apple.driver.AppleHDA : __ZN14AppleHDADriver23handleAsynchronousStartEPv + 0x58
0xffffff811e7b3fa0 : 0xffffff800aee413e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000->0xffffff7f8ea40fff
            dependency: com.apple.vecLib.kext(1.2.0)[0D01481C-BA28-3F00-9CD2-277955842FD6]@0xffffff7f8e956000
         com.apple.driver.AppleHDA(283.13)[A85E9421-A4EC-3E64-9577-93AC1B2AD9E2]@0xffffff7f8f3b8000->0xffffff7f8f4a0fff
            dependency: com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f8f212000
            dependency: com.apple.iokit.IONDRVSupport(557)[1C4E56EA-057E-3DBE-A323-E60698B193D5]@0xffffff7f8ee71000
            dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000
            dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f8f206000
            dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f8ee21000
            dependency: com.apple.driver.DspFuncLib(283.13)[BC0B6302-FD12-35AB-9F73-3CF862FC0203]@0xffffff7f8f278000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 -v debug=0x100 keepsyms=1  root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg

Mac OS version:
19A526h

Kernel version:
Darwin Kernel Version 19.0.0: Tue Jul 23 01:19:36 PDT 2019; root:xnu-6153.0.103.151.1~4/RELEASE_X86_64
Kernel UUID: 77E43123-9759-324A-BEE5-4C2404BC0BF3
Kernel slide:     0x000000000ac00000
Kernel text base: 0xffffff800ae00000
__HIB  text base: 0xffffff800ad00000
System model name: MacBookPro15,1 (Mac-937A206F2EE63C01)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

System uptime in nanoseconds: 57052522620
last loaded kext at 54468665790: com.apple.driver.AppleGraphicsDevicePolicy	4.1.30 (addr 0xffffff7f8f5ef000, size 86016)
loaded kexts:
(none)
panic(cpu 6 caller 0xffffff800b041eb1): "IPI timeout, unresponsive CPU bitmap: 0x4, NMIPI acks: 0x0, now: 0x1, deadline: 57052041087, pre-NMIPI time: 0xd4891107c, current: 0xd48986ea4, global: 1"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.0.103.151.1/osfmk/x86_64/pmap.c:2909
Backtrace (CPU 6), Frame : Return Address
0xffffff811ea73680 : 0xffffff800af3da1b mach_kernel : _handle_debugger_trap + 0x47b
0xffffff811ea736d0 : 0xffffff800b074aa5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff811ea73710 : 0xffffff800b06658b mach_kernel : _kernel_trap + 0x4fb
0xffffff811ea73760 : 0xffffff800aee4bb0 mach_kernel : _return_from_trap + 0xe0
0xffffff811ea73780 : 0xffffff800af3d107 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff811ea73880 : 0xffffff800af3d4eb mach_kernel : _panic_trap_to_debugger + 0x21b
0xffffff811ea738d0 : 0xffffff800b6cd559 mach_kernel : _panic + 0x61
0xffffff811ea73940 : 0xffffff800b041eb1 mach_kernel : _pmap_flush_tlbs + 0x841
0xffffff811ea739f0 : 0xffffff800b047afa mach_kernel : _pmap_remove_range_options + 0x36a
0xffffff811ea73ad0 : 0xffffff800b0487a6 mach_kernel : _pmap_remove_options + 0x96
0xffffff811ea73b30 : 0xffffff800afd54cb mach_kernel : _vm_map_destroy + 0x8eb
0xffffff811ea73c80 : 0xffffff800afdce1e mach_kernel : _vm_map_remove + 0x5e
0xffffff811ea73cb0 : 0xffffff800afd0766 mach_kernel : _kmem_free + 0x86
0xffffff811ea73ce0 : 0xffffff800b5c8a0f mach_kernel : __ZN11OSSerialize4freeEv + 0x4f
0xffffff811ea73d00 : 0xffffff800b66bb8b mach_kernel : _is_io_registry_entry_get_property_bin + 0x1eb
0xffffff811ea73d60 : 0xffffff800b025be4 mach_kernel : _iokit_server_routine + 0x6464
0xffffff811ea73db0 : 0xffffff800af43888 mach_kernel : _ipc_kobject_server + 0x238
0xffffff811ea73e10 : 0xffffff800af1a725 mach_kernel : _ipc_kmsg_send + 0x135
0xffffff811ea73e70 : 0xffffff800af31135 mach_kernel : _mach_msg_overwrite_trap + 0x2e5
0xffffff811ea73f00 : 0xffffff800b04ca65 mach_kernel : _mach_call_munger64 + 0x205
0xffffff811ea73fa0 : 0xffffff800aee5396 mach_kernel : _hndl_mach_scall64 + 0x16

BSD process name corresponding to current thread: WindowServer

EOF
Model: MacBookPro15,1, BootROM 220.260.170.0.0, 4 processors, Intel Core i5, 2.30 GHz, 8 GB, SMC 1.74f4
Graphics: kHW_IntelUHDGraphics630Item, Intel UHD Graphics 630, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2667 MHz, SK Hynix, HMA81GS6CJR8N-VK
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x133), Broadcom BCM43xx 1.0 (7.77.37.31.1a9)
Bluetooth: Version 6.0.7f10, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: KINGSTON SA400S37480G, 480.1 GB
USB Device: USB 3.1 Bus
USB Device: DataTraveler 3.0
USB Device: Bluetooth USB Host Controller
USB Device: Integrated Camera
Thunderbolt Bus: 

 

Share this post


Link to post
Share on other sites
41 minutes ago, xiaoM4095 said:

 

I found the option you mentioned in the BIOS, but it has been disabled. Attach my panic report.


Anonymous UUID:       73E46EBA-13F5-C21A-BD7C-53473ED43527

Wed Sep 25 20:15:07 2019

*** Panic Report ***
Panic(CPU 2, time 57052043059): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0
RAX: 0x0000000000000000, RBX: 0x00000000fe036014, RCX: 0xffffff800b059cdf, RDX: 0xffffff800b059f74
RSP: 0xffffff811e7b3490, RBP: 0xffffff811e7b3500, RSI: 0xfffffe897e036014, RDI: 0x00000000fe036014
R8:  0x0000000000000000, R9:  0x00000000fffffffe, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000004, R15: 0x0000000000000000
RFL: 0x0000000000000087, RIP: 0xffffff800b059cf9, CS:  0x0000000000000008, SS:  0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff811f085f80 : 0xffffff800b065d7b mach_kernel : _interrupt + 0x12b
0xffffff811f085fd0 : 0xffffff800aee4d5d mach_kernel : _hndl_allintrs + 0x11d
0xffffff811e7b3500 : 0xffffff800b6ad2c9 mach_kernel : _serial_init + 0x679
0xffffff811e7b3510 : 0xffffff800b031b4a mach_kernel : _console_printbuf_clear + 0x7a
0xffffff811e7b3530 : 0xffffff800b031f39 mach_kernel : _cnputc_unbuffered + 0xe9
0xffffff811e7b3560 : 0xffffff800b032366 mach_kernel : _console_write + 0x296
0xffffff811e7b35a0 : 0xffffff800b031ab8 mach_kernel : _console_printbuf_putc + 0x68
0xffffff811e7b35c0 : 0xffffff800af5515f mach_kernel : ___doprnt + 0x9f
0xffffff811e7b36a0 : 0xffffff800b6044b1 mach_kernel : _IOLog + 0x131
0xffffff811e7b3850 : 0xffffff7f8f3e8fc7 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput19performFormatChangeEP13IOAudioStreamPK20_IOAudioStreamFormatPK18_IOAudioSampleRate + 0x2b
0xffffff811e7b38b0 : 0xffffff7f8ea13abd com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0x399
0xffffff811e7b3980 : 0xffffff7f8f3ebdfc com.apple.driver.AppleHDA : __ZN14AppleHDAStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0xb4
0xffffff811e7b39c0 : 0xffffff7f8ea1341d com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionb + 0x135
0xffffff811e7b3a50 : 0xffffff7f8f3e8e16 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput15initAudioStreamEv + 0x2b4
0xffffff811e7b3ab0 : 0xffffff7f8f3d8aac com.apple.driver.AppleHDA : __ZN14AppleHDAEngine12initHardwareEP9IOService + 0x21e
0xffffff811e7b3b10 : 0xffffff7f8f3e885d com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput12initHardwareEP9IOService + 0xf
0xffffff811e7b3b30 : 0xffffff7f8ea091d1 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOServiceP13IOAudioDevice + 0x111
0xffffff811e7b3b70 : 0xffffff7f8ea09087 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOService + 0x65
0xffffff811e7b3bb0 : 0xffffff7f8f3cc80b com.apple.driver.AppleHDA : __ZN14AppleHDADriver19activateAudioEngineEP13IOAudioEngineb + 0xf9
0xffffff811e7b3bf0 : 0xffffff7f8f3cd200 com.apple.driver.AppleHDA : __ZN14AppleHDADriver20activateAudioEnginesEv + 0xbe
0xffffff811e7b3c30 : 0xffffff7f8f3c7a7a com.apple.driver.AppleHDA : __ZN14AppleHDADriver18initHardwareActionEP9IOService + 0x316
0xffffff811e7b3c80 : 0xffffff800b63f5f8 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138
0xffffff811e7b3ce0 : 0xffffff7f8f3c7756 com.apple.driver.AppleHDA : __ZN14AppleHDADriver12initHardwareEP9IOService + 0x3c
0xffffff811e7b3d00 : 0xffffff7f8ea06588 com.apple.iokit.IOAudioFamily : __ZN13IOAudioDevice5startEP9IOService + 0x10e
0xffffff811e7b3d40 : 0xffffff7f8f3c95a2 com.apple.driver.AppleHDA : __ZN14AppleHDADriver13completeStartEv + 0x180
0xffffff811e7b3ed0 : 0xffffff7f8f3c9254 com.apple.driver.AppleHDA : __ZN14AppleHDADriver11startActionEv + 0xdc
0xffffff811e7b3f40 : 0xffffff800b63c8ae mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e
0xffffff811e7b3f80 : 0xffffff7f8f3c9132 com.apple.driver.AppleHDA : __ZN14AppleHDADriver23handleAsynchronousStartEPv + 0x58
0xffffff811e7b3fa0 : 0xffffff800aee413e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000->0xffffff7f8ea40fff
            dependency: com.apple.vecLib.kext(1.2.0)[0D01481C-BA28-3F00-9CD2-277955842FD6]@0xffffff7f8e956000
         com.apple.driver.AppleHDA(283.13)[A85E9421-A4EC-3E64-9577-93AC1B2AD9E2]@0xffffff7f8f3b8000->0xffffff7f8f4a0fff
            dependency: com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f8f212000
            dependency: com.apple.iokit.IONDRVSupport(557)[1C4E56EA-057E-3DBE-A323-E60698B193D5]@0xffffff7f8ee71000
            dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8ea02000
            dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f8f206000
            dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f8ee21000
            dependency: com.apple.driver.DspFuncLib(283.13)[BC0B6302-FD12-35AB-9F73-3CF862FC0203]@0xffffff7f8f278000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 -v debug=0x100 keepsyms=1  root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg

Mac OS version:
19A526h

Kernel version:
Darwin Kernel Version 19.0.0: Tue Jul 23 01:19:36 PDT 2019; root:xnu-6153.0.103.151.1~4/RELEASE_X86_64
Kernel UUID: 77E43123-9759-324A-BEE5-4C2404BC0BF3
Kernel slide:     0x000000000ac00000
Kernel text base: 0xffffff800ae00000
__HIB  text base: 0xffffff800ad00000
System model name: MacBookPro15,1 (Mac-937A206F2EE63C01)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

System uptime in nanoseconds: 57052522620
last loaded kext at 54468665790: com.apple.driver.AppleGraphicsDevicePolicy	4.1.30 (addr 0xffffff7f8f5ef000, size 86016)
loaded kexts:
(none)
panic(cpu 6 caller 0xffffff800b041eb1): "IPI timeout, unresponsive CPU bitmap: 0x4, NMIPI acks: 0x0, now: 0x1, deadline: 57052041087, pre-NMIPI time: 0xd4891107c, current: 0xd48986ea4, global: 1"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.0.103.151.1/osfmk/x86_64/pmap.c:2909
Backtrace (CPU 6), Frame : Return Address
0xffffff811ea73680 : 0xffffff800af3da1b mach_kernel : _handle_debugger_trap + 0x47b
0xffffff811ea736d0 : 0xffffff800b074aa5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff811ea73710 : 0xffffff800b06658b mach_kernel : _kernel_trap + 0x4fb
0xffffff811ea73760 : 0xffffff800aee4bb0 mach_kernel : _return_from_trap + 0xe0
0xffffff811ea73780 : 0xffffff800af3d107 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff811ea73880 : 0xffffff800af3d4eb mach_kernel : _panic_trap_to_debugger + 0x21b
0xffffff811ea738d0 : 0xffffff800b6cd559 mach_kernel : _panic + 0x61
0xffffff811ea73940 : 0xffffff800b041eb1 mach_kernel : _pmap_flush_tlbs + 0x841
0xffffff811ea739f0 : 0xffffff800b047afa mach_kernel : _pmap_remove_range_options + 0x36a
0xffffff811ea73ad0 : 0xffffff800b0487a6 mach_kernel : _pmap_remove_options + 0x96
0xffffff811ea73b30 : 0xffffff800afd54cb mach_kernel : _vm_map_destroy + 0x8eb
0xffffff811ea73c80 : 0xffffff800afdce1e mach_kernel : _vm_map_remove + 0x5e
0xffffff811ea73cb0 : 0xffffff800afd0766 mach_kernel : _kmem_free + 0x86
0xffffff811ea73ce0 : 0xffffff800b5c8a0f mach_kernel : __ZN11OSSerialize4freeEv + 0x4f
0xffffff811ea73d00 : 0xffffff800b66bb8b mach_kernel : _is_io_registry_entry_get_property_bin + 0x1eb
0xffffff811ea73d60 : 0xffffff800b025be4 mach_kernel : _iokit_server_routine + 0x6464
0xffffff811ea73db0 : 0xffffff800af43888 mach_kernel : _ipc_kobject_server + 0x238
0xffffff811ea73e10 : 0xffffff800af1a725 mach_kernel : _ipc_kmsg_send + 0x135
0xffffff811ea73e70 : 0xffffff800af31135 mach_kernel : _mach_msg_overwrite_trap + 0x2e5
0xffffff811ea73f00 : 0xffffff800b04ca65 mach_kernel : _mach_call_munger64 + 0x205
0xffffff811ea73fa0 : 0xffffff800aee5396 mach_kernel : _hndl_mach_scall64 + 0x16

BSD process name corresponding to current thread: WindowServer

EOF
Model: MacBookPro15,1, BootROM 220.260.170.0.0, 4 processors, Intel Core i5, 2.30 GHz, 8 GB, SMC 1.74f4
Graphics: kHW_IntelUHDGraphics630Item, Intel UHD Graphics 630, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR4, 2667 MHz, SK Hynix, HMA81GS6CJR8N-VK
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x133), Broadcom BCM43xx 1.0 (7.77.37.31.1a9)
Bluetooth: Version 6.0.7f10, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: KINGSTON SA400S37480G, 480.1 GB
USB Device: USB 3.1 Bus
USB Device: DataTraveler 3.0
USB Device: Bluetooth USB Host Controller
USB Device: Integrated Camera
Thunderbolt Bus: 

 

 

Is this standard? Cause I've seen it before. And I just don't see the point for root-dmg.... Is this something specific to Laptops in general?

Boot args: dart=0 -v debug=0x100 keepsyms=1  root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg

Anyway, which ig-platform-id are you using with your config? Would you be able to clean the serials form your SMBIOS and post your config? I feel like there might be something wrong there. Or something that could be fixed from there.

Edited by arsradu

Share this post


Link to post
Share on other sites
I've noticed one difference here between Sierra and Catalina with the Clover EC0 rename patch. When I renamed EC0 in the DSDT AppleBusPowerControllerUSB showed up under the renamed EC in both systems. Now with the Clover patch it only shows up in Sierra, not Catalina.

I am using a fake ec device (Z170x) and am having the same issue, no more AppleBusPowerControllerUSB in ioreg on Catalina. I haven’t tested other versions of macOS as I’m only running 10.15.

The EC device is in ioreg it’s just missing its entry for AppleBusPowerControllerUSB.

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

apologize if I am in the wrong area here but can anyone tell me if there is any patch for MacPro 2010 in OS X catalina?

Share this post


Link to post
Share on other sites
5 minutes ago, Konami® said:

apologize if I am in the wrong area here but can anyone tell me if there is any patch for MacPro 2010 in OS X catalina?

 

Real MacPro 2010 or Hackintosh?

 

Can you complete your signature, please :)

Share this post


Link to post
Share on other sites

If this is a real MacPro 2010, for Mojave, you can use dosdude1's patcher. But...indeed, there doesn't seem to be one for Catalina...yet. Not sure if you can install Mojave and then update to Catalina. Not sure if that will work. Never used it. So...I don't know.

 

But anyway, as Mat said, we would need to know more about that hardware first. :) 

Share this post


Link to post
Share on other sites

New installation can be successful, but the kernel panic when data is restored through Time Machine.

屏幕快照2019年9月25日上午10.47.54.png

Edited by fangf2018

Share this post


Link to post
Share on other sites
3 hours ago, SavageAUS said:

I am using a fake ec device (Z170x) and am having the same issue, no more AppleBusPowerControllerUSB in ioreg on Catalina. I haven’t tested other versions of macOS as I’m only running 10.15.

The EC device is in ioreg it’s just missing its entry for AppleBusPowerControllerUSB.

 

 

Sent from my iPhone using Tapatalk

I have a same  issue  too AppleBusPowerController  is missing in ioreg on catalina beta 9 but didn't appear such a issue in Mojave  i think that apple something changed on Catalina beta 9

Share this post


Link to post
Share on other sites
On 6/16/2019 at 6:24 PM, ITzTravelInTime said:

 

Read the backtrace, it's clearly the sata system driver that crashes, probably just because you booted out of a drive attached to a non proprly configured or supported sata controller

I want to know how to fix this problem.

Share this post


Link to post
Share on other sites
43 minutes ago, fangf2018 said:

New installation can be successful, but the kernel panic when data is restored through Time Machine.

屏幕快照2019年9月25日上午10.47.54.png

 

This happened to me when I installed Catalina.  For me, I had a kext in ~/Library/Extensions that was causing the problem.  I don't recall the name of the kext but it had AHCI in its name.

Share this post


Link to post
Share on other sites
5 hours ago, arsradu said:

If this is a real MacPro 2010, for Mojave, you can use dosdude1's patcher. But...indeed, there doesn't seem to be one for Catalina...yet. Not sure if you can install Mojave and then update to Catalina. Not sure if that will work. Never used it. So...I don't know.

 

But anyway, as Mat said, we would need to know more about that hardware first. :) 

For all involved...

 

Apple has seen fit with Catalina to KILL OFF all prior Mac Pros!  The LATEST OS for a Mid-2010 Mac Pro 5,1 is Mojave.

 

NOW, can Catalina be "forced" onto a 5,1???  I'm sure someone will find a way to do it, BUT will it be stable???

 

Take the Mac Pro 5,1 to Mojave, (sans ANY NVIDIA Cards), and be happy to get it that far.  Mine is on High Sierra, AND will stay that way because of my need to HAVE to have NVIDIA Cards for CUDA Number Crunching for SETI@Home.

 

 

ymmv

Share this post


Link to post
Share on other sites
3 hours ago, mnfesq said:

 

当我安装Catalina时,这发生在我身上。对我而言,我在〜/ Library / Extensions中有一个kext引起了问题。我不记得kext的名称,但是它的名称是AHCI。

Are you fuison dreve? Are there any specific solutions?

Share this post


Link to post
Share on other sites
12 hours ago, arsradu said:

 

Is this standard? Cause I've seen it before. And I just don't see the point for root-dmg.... Is this something specific to Laptops in general?


Boot args: dart=0 -v debug=0x100 keepsyms=1  root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg

Anyway, which ig-platform-id are you using with your config? Would you be able to clean the serials form your SMBIOS and post your config? I feel like there might be something wrong there. Or something that could be fixed from there.

I just tested it during the installation phase, and the ig-platform-id I am using is 0x3E9B0000. The current situation is that if I inject ig-platform-id and layout-id at the same time, I get a kernel panic. If I only use one of them, I can smoothly enter the installation interface.

Share this post


Link to post
Share on other sites
4 hours ago, fangf2018 said:

Are you fuison dreve? Are there any specific solutions?

 

No fusion drive for me.  My specs are in my signature.  I just deleted the kext.  I didn't need it to run Catalina.  Once I deleted it, no more KP.

Share this post


Link to post
Share on other sites
5 minutes ago, mnfesq said:

 

No fusion drive for me.  My specs are in my signature.  I just deleted the kext.  I didn't need it to run Catalina.  Once I deleted it, no more KP.

??????Which one?

Share this post


Link to post
Share on other sites

Hey all!

 

If you're using my wrapped frameworks on DP9 and experiencing PerfPowerServices crashes, please install the newest version here.

 

I figured I should post this here (actually my first message on this site, I think!) because it's sort of a "silent" problem that could go unnoticed but impact performance/stability.

 

I'll try to keep up with this thread a bit more going forward, so feel free to @ me if you notice any weird behaviors. Though I do admit I'm not really knowledgeable in the hackintosh field.

 

Will

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NikTheNoob
      Hi,
       
      I'm rather new to Hackintosh and trying my first build with OpenCore on AMD, but I run into issues causing OpenCore to crash before even loading the macOS installer. As I'm not sure which one is causing the crash, I'm trying to resolve all of them and one of the error messages has to do with WhateverGreen, which I was able to see in this slow-mo loading video. Basically I'm getting an error that I'm running an unsupported processor, even though I think I was following this guide by the step.
      What could be causing this and what do I need to do to resolve it?
       
      CPU: AMD Ryzen 2700X
      MB: Gigabyte Aorus X470 Ultra Gaming
      Memory: 4x8 GB HyperX Predator, 3000 MHz Cl15
      Storage: Samsung Evo 970 Nvme 512 GB, Crucial MX500 500GB SATA
      GPU: MSI Radeon RX580 GamingX 8GB
    • By tonyx86
      This thread for installing Catalina on the Dell Latitude E6410 WITH NVIDIA GRAPHICS (BIOS A17, NVidia 3100m) will help you install a fresh installation of Catalina on your Dell Latitude E6410, it will help you upgrade from 10.15.2 to 10.15.3 (if you originally installed Catalina from this thread) and it will also help you upgrade from Mojave 10.14.6 if you have already installed Mojave by following the instructions here.  The instructions in this first post assume that you are installing Catalina in an APFS container.  If you are curious about the evolution of this solution and how sleep/wake was solved, review the Mojave installation thread.
       
      Important: This Thread is NOT intended to help you install macOS on a Latitude E6410 with Intel HD Graphics (without Nvidia graphics).  The DSDT attached to this first post (in E6410-Catalina.zip) is VERY SPECIFIC to the Nvidia graphics implementation and has not been edited for HD Graphics - there are elements required for HD Graphics that are missing from the attached DSDT and there are DSDT mods that have not been tested with HD Graphics.  Also, the kexts attached to this first post are specific to a Broadcom Wi-Fi card which must replace the original Intel Wi-Fi card.
       
      This first post will be modified to reflect lessons learned and to reflect the most current working state of my Latitude E6410 (with NVidia 3100m discrete graphics) running Catalina.  Issues, observations and performance tips are recorded toward the bottom of this first post.  My recommended CLOVER configuration is specified toward the bottom of this first post.
       
      *** If you want help with your installation, please post your issue along with problem reporting files generated using @black.dragon74's problem reporting tool.  Google 'GENERATE PROPER PROBLEM REPORTING FILES black.dragon74' to find it. ***.  If Catalina's Read-Only protections block your installation of black.dragon74's gen_debug script, please copy the attached gen_debug script to your Desktop, change script properties with the terminal command 'chmod a+x ~/Desktop/gen_debug' and run the script from your Desktop.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) Wi-Fi: Broadcom BCM 94352HMB (replaced original Wi-Fi card) BIOS (version A17) configured as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC:Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace:Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;   
      Versions of the software used in this installation are listed below the installation steps.  EFI and kexts for Catalina are attached to this first post in E6410-Catalina.zip.  CLOVER configuration is specified below the installation steps.
       
      Wi-Fi connection to an Access Point is delayed when using AppleALC for sound.  Do not use Apple ALC.  Use VoodooHDA pkg 2.9.2 v14 for sound.
       
      Steps to install Catalina on a Dell Latitude E6410 (BIOS A17, NVidia 3100m)
      Make sure that your system matches my system description above (including BIOS version, Wi-Fi card, BIOS settings) If performing an upgrade from Mojave or a previous version of Catalina, backup your Mojave or Catalina partition! (Carbon Copy or similar) Download Catalina Installer Download DosDude Catalina Patcher Use DosDude Patcher to create Catalina USB Installer Delete LegacyUSBInjector.kext (we're using @RehabMan's USBInjectAll.kext with custom SSDT) and delete SIPManager.kext (CLOVER is managing SIP) from Catalina USB Installer's /Library/Extensions folder Copy all but the FakeSMC sensor kexts in E6410-Catalina.zip (attached) LE folder to the Catalina USB Installer /Library/Extensions (copy all kexts (including FakeSMC.kext) but not the FakeSMC sensor kexts) Install CLOVER Bootloader (Legacy) on USB Installer using the EFI in the E6410-Catalina.zip (attached).  Use the CLOVER configuration specified below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Reset your Latitude E6410 NVRAM by doing the following (this may be important if you're making changes to your existing EFI and won't hurt anything if you're not making any changes) turn-off your laptop remove A/C power and main battery press and hold the power button for 30 seconds restore A/C power and battery Boot your Latitude E6410 from the Catalina USB Installer that you created in steps 5-8. Select "Reinstall macOS" (note that I have existing installations of Mojave and High Sierra on my Latitude E6410, so it's possible that this menu item changes to "Install macOS" if you don't have any previous macOS installations). Select your Catalina destination partition (which will be your Mojave or previous Catalina partition if you are upgrading) After the Catalina Installer reboots the first time, boot from the "macOS Installer" partition on the disk that you selected as your Catalina destination (not the macOS installer on the USB) After the Catalina Installer reboots the second time, boot the Catalina macOS Installer on the USB Select the Post Install Patcher utility Select only the following Post Install Patches (no other patches / options) Install Patch Updater Legacy Video After the Post Install Patcher reboots,  boot from the newly installed (or upgraded) Catalina partition and complete the macOS configuration Remove these kexts (if they exist) from /Library/Extensions: LegacyUSBInjector.kext, LegacyUSBVideoSupport.kext and SIPManager.kext If you are performing a fresh installation of Catalina: Install CLOVER on your boot disk and configure EFI using files in the attached E6410-Catalina.zip.  Use the CLOVER configuration below.  Your EFI Clover/kexts/Other folder needs only FakeSMC.kext, IntelMausiEthernet.kext, USBInjectAll.kext and VoodooPS2.kext.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Install all kexts in the attached E6410-Catalina.zip LE folder to your /Library/Extensions folder.  NOTE: These instructions assume installation of Brcm kexts in /Library/Extensions.  Read the Brcm install instructions if you're installing kexts in EFI/Clover/kexts/Other, since your installation and at least one kext WILL BE DIFFERENT. Copy HWMonitor from the application folder in the attached E6410-Catalina.zip to your Applications folder. Install VoodooHDA (I installed using the Classic method) Skip to Step 21 If you are upgrading from a previous version of Catalina using the instructions from this thread or from Mojave that you installed using the instructions here: Update Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /Library/Extensions) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. NOTE: These instructions assume installation of Brcm kexts in /Library/Extensions.  Read the Brcm install instructions if you're installing kexts in EFI/Clover/kexts/Other, since your installation and at least one kext WILL BE DIFFERENT. Update IntelMausiEthernet.kext Remove VoodooSDHC.kext from /Library/Extensions Re-install VoodooHDA if necessary (I installed using the Classic method) Ensure PROPER kext installation: If you're manually installing kexts in /Library/Extensions, make sure that you execute the following (in terminal) cd /Library/Extensions sudo chown -R root:wheel *.kext sudo chmod -R 755 *.kext sudo kextcache -i / After you execute 'sudo kextcache -i /' you should observe that ALL kexts are allowed.  If not, your kext directory attributes are probably incorrect.  Repeat kext installation and try again. Reboot from your new/upgraded Catalina partition Welcome to macOS Catalina! Change the keyboard type to ISO (System Preferences > Keyboard > Change Keyboard Type) Swap the Command and Option keys (System Preferences > Keyboard > Modifier Keys) Set hibernatemode: In terminal, execute sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo touch /var/vm/sleepimage sudo chflags schg /var/vm/sleepimage  
      Version Info at the time of this writing:
      Catalina Installer 10.15.3 CLOVER v2.5k r5103 DosDude Catalina Patcher: v1.3.0 Lilu.kext 1.4.1 AirportBrcmFixup.kext 2.0.6 BrcmFirmwareRepo.kext 2.5.1 BrcmBluetoothInjector.kext 2.5.1 BrcmPatchRAM3.kext 2.5.1 IntelMausiEthernet.kext 2.5.0
      VoodooHDA.kext 2.9.2 v14 (NOT AppleALC)
       
      What is not working (that was working in Mojave)
      SD Card Slot (had to remove VoodooSDHC.kext which caused system freeze on wake)  
      Known Issues and Their Solutions
      (No solution yet) Brightness slider does not work in System Preferences > Displays.  Brightness is easily controlled with Dell brightness keys.  There is some work on this later in this thread, but I will not be solving this as I'm content with the Dell brightness keys (and Ambient Light Sensor works to auto-adjust brightness). I continue to refine the DSDT and CLOVER config.plist to optimize my Latitude E6410 for multi-booting between various macOS versions (High Sierra, Mojave and Catalina at the time of this writing). If you upgrade your Latitude E6410 EFI using my attached EFI, you may find that your Latitude E6410 is stuck in a boot-loop that ends in a white screen and reboots.  Clear your system by doing the following: turn off your laptop, remove A/C power, remove the main battery, press and hold the power button for 30 seconds, restore A/C power and battery, boot normally.  I have only found this to be necessary (very rarely) after making an EFI change, but you may find it helpful if making kext changes in /Library/Extensions as well. (Work-around - no permanent solution yet) Cannot turn on Bluetooth after shutting-down with Bluetooth off.  Work-around is to leave Bluetooth on.  I don't use Bluetooth and don't mind, so this will likely be solved by someone else.  If you experience this issue and can't turn-on Bluetooth, I have found that putting the laptop to sleep (Fn-F1) and then waking the laptop restores proper operation of Bluetooth.  I have posted a problem description, logs and problem reporting files in this thread for help with this problem. (Solved - no further work required) Laptop does not sleep when closing lid.  Solution is to add a Notify (LID0) code to Method (BTNV) in the DSDT.  No surprise that the Latitude E6410 has yet another incomplete ACPI implementation.  I am using the same EFI for High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.3 and it works in all three macOSes. (No solution yet) No SD Card Slot (had to remove VoodooSDHC.kext) - I read somewhere that there is a solution that does not require any kexts (just a DSDT edit).  Haven't yet implemented this fix. (Not a problem that needs to be solved - leaving for historical purposes.  I am running Catalina without this.) - IOHWControl does not load under GFX0 (as observed in IORegistryExplorer).  Solution (if it needs to be solved) is to install AppleHWSensor.kext from a DosDude-patched Mojave /S/L/E in Catalina's /L/E.  Copy and install your own or use the kext attached to this post. (Solved - no further work required) Wi-Fi connection is delayed until a minute or so after boot - Use VoodooHDA and NOT AppleALC (Solved - no further work required) External USB ports do not work after waking from sleep (S3) - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Boot and shut-down time of Catalina is slower than Mojave - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Wi-Fi is not immediately available at OS startup - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Laptop freezes on wake - Remove VoodooSDHC.kext from /Library/Extensions  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z (I haven't noticed this issue for a while since I completed DSDT edits for Mojave, but keeping this here for historical purposes)  
      CLOVER Installation: Use these configuration options
      Install Clover in the ESP Boot Sectors Install boot0af in MBR Clover for BIOS (legacy) booting Clover EFI 64-bits SATA BIOS Drivers, 64-bit Recommended drivers FSInject File System drivers ApfsDriverLoader Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane After clicking "Continue", if prompted with "This Clover package is incompatible with this version of macOS," install anyway  
      After CLOVER installation is complete Copy the following from the attached E6410-Catalina.zip ACPI patched contents config.plist (change XX-MASKED-XX values to your own) kexts/Other (remove all other kext folders) Remove christmas and new year folders from themes (if present)  
      Credits
      Thanks to those who contributed to my Mojave solution and to the DosDude team (for the incredible macOS patchers), I think this Catalina installation was the easiest macOS installation that I have experienced (so far).  Many thanks to @Slice and his team for the incredible work on CLOVER and for continuing to support old legacy systems like this.  Also, thanks to @Mieze and @headkaze and others I'm sure for maintaining the Brcm kexts.  And finally, I still prefer to manually apply patches to the DSDTs in my systems.  CLOVER offers extensive patching functionality, but I'm old-school and like to have an error-free, fully-patched DSDT with a simple CLOVER config.plist.  I think that this manual DSDT patching approach (which required an extensive review and debugging of the original unpatched DSDT in this thread) is the reason that this Latitude E6410 is such a perfect MacBookPro6,2.  Thank you @RehabMan for being a great teacher and for always insisting on problem reporting files .
       
       
       

      AppleHWSensor.kext.zip

      gen_debug
      E6410-Catalina-3v5.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
    • By ltooz_audis
      Some people do have problem understanding AppleALC, how to use it for their own codecs. Here's how I used it for both Realtek ALC and IDT audio codecs.
      https://youtu.be/ZNUzQkb6p5g
      For more info on Catalina click here.
      Cheers,
      Louis
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
×