Jump to content
fantomas

[pre-release] macOS Catalina

1,735 posts in this topic

Recommended Posts

On 9/11/2019 at 6:02 PM, fusion71au said:

Update from DP7 to DP8 OK on my legacy Dell XPS M1530 with non metal Tesla Geforce 8600M GT.

Catalina patcher v1.1.1 already updated and working for DP8_19A558d with support for legacy non metal graphics cards, thanks to @dosdude & @ASentientBot 's latest Skylight Framework update :D.

 

Also works just fine on my laptop with Nvidia Fermi.. as usual, thanks. :whistle:

macOS-Catalina.jpg 

Share this post


Link to post
Share on other sites
Advertisement

Hi, guys. When I inject the layout id, I can't enter the system. How can I solve it?

 

Anonymous UUID:       73E46EBA-13F5-C21A-BD7C-53473ED43527

Sat Sep 14 20:22:58 2019

*** Panic Report ***
Panic(CPU 2, time 57850157582): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0
RAX: 0x0000000000000000, RBX: 0x00000000fe036014, RCX: 0xffffff8016259cdf, RDX: 0xffffff8016259f74
RSP: 0xffffff8129a0b490, RBP: 0xffffff8129a0b500, RSI: 0xfffffe8c3e036014, RDI: 0x00000000fe036014
R8:  0x0000000000000000, R9:  0x00000000fffffffe, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000004, R15: 0x0000000000000000
RFL: 0x0000000000000087, RIP: 0xffffff8016259cf9, CS:  0x0000000000000008, SS:  0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff812a2b0f80 : 0xffffff8016265d7b mach_kernel : _interrupt + 0x12b
0xffffff812a2b0fd0 : 0xffffff80160e4d5d mach_kernel : _hndl_allintrs + 0x11d
0xffffff8129a0b500 : 0xffffff80168ad2c9 mach_kernel : _serial_init + 0x679
0xffffff8129a0b510 : 0xffffff8016231b4a mach_kernel : _console_printbuf_clear + 0x7a
0xffffff8129a0b530 : 0xffffff8016231f39 mach_kernel : _cnputc_unbuffered + 0xe9
0xffffff8129a0b560 : 0xffffff8016232366 mach_kernel : _console_write + 0x296
0xffffff8129a0b5a0 : 0xffffff8016231ab8 mach_kernel : _console_printbuf_putc + 0x68
0xffffff8129a0b5c0 : 0xffffff801615515f mach_kernel : ___doprnt + 0x9f
0xffffff8129a0b6a0 : 0xffffff80168044b1 mach_kernel : _IOLog + 0x131
0xffffff8129a0b850 : 0xffffff7f9a5c1fc7 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput19performFormatChangeEP13IOAudioStreamPK20_IOAudioStreamFormatPK18_IOAudioSampleRate + 0x2b
0xffffff8129a0b8b0 : 0xffffff7f99c13abd com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0x399
0xffffff8129a0b980 : 0xffffff7f9a5c4dfc com.apple.driver.AppleHDA : __ZN14AppleHDAStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0xb4
0xffffff8129a0b9c0 : 0xffffff7f99c1341d com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionb + 0x135
0xffffff8129a0ba50 : 0xffffff7f9a5c1e16 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput15initAudioStreamEv + 0x2b4
0xffffff8129a0bab0 : 0xffffff7f9a5b1aac com.apple.driver.AppleHDA : __ZN14AppleHDAEngine12initHardwareEP9IOService + 0x21e
0xffffff8129a0bb10 : 0xffffff7f9a5c185d com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput12initHardwareEP9IOService + 0xf
0xffffff8129a0bb30 : 0xffffff7f99c091d1 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOServiceP13IOAudioDevice + 0x111
0xffffff8129a0bb70 : 0xffffff7f99c09087 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOService + 0x65
0xffffff8129a0bbb0 : 0xffffff7f9a5a580b com.apple.driver.AppleHDA : __ZN14AppleHDADriver19activateAudioEngineEP13IOAudioEngineb + 0xf9
0xffffff8129a0bbf0 : 0xffffff7f9a5a6200 com.apple.driver.AppleHDA : __ZN14AppleHDADriver20activateAudioEnginesEv + 0xbe
0xffffff8129a0bc30 : 0xffffff7f9a5a0a7a com.apple.driver.AppleHDA : __ZN14AppleHDADriver18initHardwareActionEP9IOService + 0x316
0xffffff8129a0bc80 : 0xffffff801683f5f8 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138
0xffffff8129a0bce0 : 0xffffff7f9a5a0756 com.apple.driver.AppleHDA : __ZN14AppleHDADriver12initHardwareEP9IOService + 0x3c
0xffffff8129a0bd00 : 0xffffff7f99c06588 com.apple.iokit.IOAudioFamily : __ZN13IOAudioDevice5startEP9IOService + 0x10e
0xffffff8129a0bd40 : 0xffffff7f9a5a25a2 com.apple.driver.AppleHDA : __ZN14AppleHDADriver13completeStartEv + 0x180
0xffffff8129a0bed0 : 0xffffff7f9a5a2254 com.apple.driver.AppleHDA : __ZN14AppleHDADriver11startActionEv + 0xdc
0xffffff8129a0bf40 : 0xffffff801683c8ae mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e
0xffffff8129a0bf80 : 0xffffff7f9a5a2132 com.apple.driver.AppleHDA : __ZN14AppleHDADriver23handleAsynchronousStartEPv + 0x58
0xffffff8129a0bfa0 : 0xffffff80160e413e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f99c02000->0xffffff7f99c40fff
            dependency: com.apple.vecLib.kext(1.2.0)[0D01481C-BA28-3F00-9CD2-277955842FD6]@0xffffff7f99b56000
         com.apple.driver.AppleHDA(283.13)[A85E9421-A4EC-3E64-9577-93AC1B2AD9E2]@0xffffff7f9a591000->0xffffff7f9a679fff
            dependency: com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f9a3eb000
            dependency: com.apple.iokit.IONDRVSupport(557)[1C4E56EA-057E-3DBE-A323-E60698B193D5]@0xffffff7f9a04a000
            dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f99c02000
            dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f9a3df000
            dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f99ffa000
            dependency: com.apple.driver.DspFuncLib(283.13)[BC0B6302-FD12-35AB-9F73-3CF862FC0203]@0xffffff7f9a451000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 -v debug=0x100 keepsyms=1  root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg

Mac OS version:
19A526h

Kernel version:
Darwin Kernel Version 19.0.0: Tue Jul 23 01:19:36 PDT 2019; root:xnu-6153.0.103.151.1~4/RELEASE_X86_64
Kernel UUID: 77E43123-9759-324A-BEE5-4C2404BC0BF3
Kernel slide:     0x0000000015e00000
Kernel text base: 0xffffff8016000000
__HIB  text base: 0xffffff8015f00000
System model name: MacBookPro15,1 (Mac-937A206F2EE63C01)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

System uptime in nanoseconds: 57850636261
last loaded kext at 55338187126: com.apple.driver.AppleGraphicsDevicePolicy	4.1.30 (addr 0xffffff7f9a7c8000, size 86016)
loaded kexts:
(none)
panic(cpu 4 caller 0xffffff8016241eb1): "IPI timeout, unresponsive CPU bitmap: 0x4, NMIPI acks: 0x0, now: 0x1, deadline: 57850152745, pre-NMIPI time: 0xd78234802, current: 0xd782aae2d, global: 1"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.0.103.151.1/osfmk/x86_64/pmap.c:2909
Backtrace (CPU 4), Frame : Return Address
0xffffff913acab680 : 0xffffff801613da1b mach_kernel : _handle_debugger_trap + 0x47b
0xffffff913acab6d0 : 0xffffff8016274aa5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff913acab710 : 0xffffff801626658b mach_kernel : _kernel_trap + 0x4fb
0xffffff913acab760 : 0xffffff80160e4bb0 mach_kernel : _return_from_trap + 0xe0
0xffffff913acab780 : 0xffffff801613d107 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff913acab880 : 0xffffff801613d4eb mach_kernel : _panic_trap_to_debugger + 0x21b
0xffffff913acab8d0 : 0xffffff80168cd559 mach_kernel : _panic + 0x61
0xffffff913acab940 : 0xffffff8016241eb1 mach_kernel : _pmap_flush_tlbs + 0x841
0xffffff913acab9f0 : 0xffffff8016247afa mach_kernel : _pmap_remove_range_options + 0x36a
0xffffff913acabad0 : 0xffffff80162487a6 mach_kernel : _pmap_remove_options + 0x96
0xffffff913acabb30 : 0xffffff80161d54cb mach_kernel : _vm_map_destroy + 0x8eb
0xffffff913acabc80 : 0xffffff80161dce1e mach_kernel : _vm_map_remove + 0x5e
0xffffff913acabcb0 : 0xffffff80161d0766 mach_kernel : _kmem_free + 0x86
0xffffff913acabce0 : 0xffffff80167c8a0f mach_kernel : __ZN11OSSerialize4freeEv + 0x4f
0xffffff913acabd00 : 0xffffff801686bb8b mach_kernel : _is_io_registry_entry_get_property_bin + 0x1eb
0xffffff913acabd60 : 0xffffff8016225be4 mach_kernel : _iokit_server_routine + 0x6464
0xffffff913acabdb0 : 0xffffff8016143888 mach_kernel : _ipc_kobject_server + 0x238
0xffffff913acabe10 : 0xffffff801611a725 mach_kernel : _ipc_kmsg_send + 0x135
0xffffff913acabe70 : 0xffffff8016131135 mach_kernel : _mach_msg_overwrite_trap + 0x2e5
0xffffff913acabf00 : 0xffffff801624ca65 mach_kernel : _mach_call_munger64 + 0x205
0xffffff913acabfa0 : 0xffffff80160e5396 mach_kernel : _hndl_mach_scall64 + 0x16

BSD process name corresponding to current thread: WindowServer

EOF

 

Share this post


Link to post
Share on other sites
21 minutes ago, xiaoM4095 said:

Hi, guys. When I inject the layout id, I can't enter the system. How can I solve it?

 


Anonymous UUID:       73E46EBA-13F5-C21A-BD7C-53473ED43527

Sat Sep 14 20:22:58 2019

*** Panic Report ***
Panic(CPU 2, time 57850157582): NMIPI for unresponsive processor: TLB flush timeout, TLB state:0x0
RAX: 0x0000000000000000, RBX: 0x00000000fe036014, RCX: 0xffffff8016259cdf, RDX: 0xffffff8016259f74
RSP: 0xffffff8129a0b490, RBP: 0xffffff8129a0b500, RSI: 0xfffffe8c3e036014, RDI: 0x00000000fe036014
R8:  0x0000000000000000, R9:  0x00000000fffffffe, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000004, R15: 0x0000000000000000
RFL: 0x0000000000000087, RIP: 0xffffff8016259cf9, CS:  0x0000000000000008, SS:  0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff812a2b0f80 : 0xffffff8016265d7b mach_kernel : _interrupt + 0x12b
0xffffff812a2b0fd0 : 0xffffff80160e4d5d mach_kernel : _hndl_allintrs + 0x11d
0xffffff8129a0b500 : 0xffffff80168ad2c9 mach_kernel : _serial_init + 0x679
0xffffff8129a0b510 : 0xffffff8016231b4a mach_kernel : _console_printbuf_clear + 0x7a
0xffffff8129a0b530 : 0xffffff8016231f39 mach_kernel : _cnputc_unbuffered + 0xe9
0xffffff8129a0b560 : 0xffffff8016232366 mach_kernel : _console_write + 0x296
0xffffff8129a0b5a0 : 0xffffff8016231ab8 mach_kernel : _console_printbuf_putc + 0x68
0xffffff8129a0b5c0 : 0xffffff801615515f mach_kernel : ___doprnt + 0x9f
0xffffff8129a0b6a0 : 0xffffff80168044b1 mach_kernel : _IOLog + 0x131
0xffffff8129a0b850 : 0xffffff7f9a5c1fc7 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput19performFormatChangeEP13IOAudioStreamPK20_IOAudioStreamFormatPK18_IOAudioSampleRate + 0x2b
0xffffff8129a0b8b0 : 0xffffff7f99c13abd com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0x399
0xffffff8129a0b980 : 0xffffff7f9a5c4dfc com.apple.driver.AppleHDA : __ZN14AppleHDAStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionP12OSDictionaryb + 0xb4
0xffffff8129a0b9c0 : 0xffffff7f99c1341d com.apple.iokit.IOAudioFamily : __ZN13IOAudioStream9setFormatEPK20_IOAudioStreamFormatPK29_IOAudioStreamFormatExtensionb + 0x135
0xffffff8129a0ba50 : 0xffffff7f9a5c1e16 com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput15initAudioStreamEv + 0x2b4
0xffffff8129a0bab0 : 0xffffff7f9a5b1aac com.apple.driver.AppleHDA : __ZN14AppleHDAEngine12initHardwareEP9IOService + 0x21e
0xffffff8129a0bb10 : 0xffffff7f9a5c185d com.apple.driver.AppleHDA : __ZN19AppleHDAEngineInput12initHardwareEP9IOService + 0xf
0xffffff8129a0bb30 : 0xffffff7f99c091d1 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOServiceP13IOAudioDevice + 0x111
0xffffff8129a0bb70 : 0xffffff7f99c09087 com.apple.iokit.IOAudioFamily : __ZN13IOAudioEngine5startEP9IOService + 0x65
0xffffff8129a0bbb0 : 0xffffff7f9a5a580b com.apple.driver.AppleHDA : __ZN14AppleHDADriver19activateAudioEngineEP13IOAudioEngineb + 0xf9
0xffffff8129a0bbf0 : 0xffffff7f9a5a6200 com.apple.driver.AppleHDA : __ZN14AppleHDADriver20activateAudioEnginesEv + 0xbe
0xffffff8129a0bc30 : 0xffffff7f9a5a0a7a com.apple.driver.AppleHDA : __ZN14AppleHDADriver18initHardwareActionEP9IOService + 0x316
0xffffff8129a0bc80 : 0xffffff801683f5f8 mach_kernel : __ZN13IOCommandGate9runActionEPFiP8OSObjectPvS2_S2_S2_ES2_S2_S2_S2_ + 0x138
0xffffff8129a0bce0 : 0xffffff7f9a5a0756 com.apple.driver.AppleHDA : __ZN14AppleHDADriver12initHardwareEP9IOService + 0x3c
0xffffff8129a0bd00 : 0xffffff7f99c06588 com.apple.iokit.IOAudioFamily : __ZN13IOAudioDevice5startEP9IOService + 0x10e
0xffffff8129a0bd40 : 0xffffff7f9a5a25a2 com.apple.driver.AppleHDA : __ZN14AppleHDADriver13completeStartEv + 0x180
0xffffff8129a0bed0 : 0xffffff7f9a5a2254 com.apple.driver.AppleHDA : __ZN14AppleHDADriver11startActionEv + 0xdc
0xffffff8129a0bf40 : 0xffffff801683c8ae mach_kernel : __ZN10IOWorkLoop9runActionEPFiP8OSObjectPvS2_S2_S2_ES1_S2_S2_S2_S2_ + 0x3e
0xffffff8129a0bf80 : 0xffffff7f9a5a2132 com.apple.driver.AppleHDA : __ZN14AppleHDADriver23handleAsynchronousStartEPv + 0x58
0xffffff8129a0bfa0 : 0xffffff80160e413e mach_kernel : _call_continuation + 0x2e
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f99c02000->0xffffff7f99c40fff
            dependency: com.apple.vecLib.kext(1.2.0)[0D01481C-BA28-3F00-9CD2-277955842FD6]@0xffffff7f99b56000
         com.apple.driver.AppleHDA(283.13)[A85E9421-A4EC-3E64-9577-93AC1B2AD9E2]@0xffffff7f9a591000->0xffffff7f9a679fff
            dependency: com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f9a3eb000
            dependency: com.apple.iokit.IONDRVSupport(557)[1C4E56EA-057E-3DBE-A323-E60698B193D5]@0xffffff7f9a04a000
            dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f99c02000
            dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f9a3df000
            dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f99ffa000
            dependency: com.apple.driver.DspFuncLib(283.13)[BC0B6302-FD12-35AB-9F73-3CF862FC0203]@0xffffff7f9a451000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 -v debug=0x100 keepsyms=1  root-dmg=file:///Install%20macOS%20Catalina%20Beta.app/Contents/SharedSupport/BaseSystem.dmg

Mac OS version:
19A526h

Kernel version:
Darwin Kernel Version 19.0.0: Tue Jul 23 01:19:36 PDT 2019; root:xnu-6153.0.103.151.1~4/RELEASE_X86_64
Kernel UUID: 77E43123-9759-324A-BEE5-4C2404BC0BF3
Kernel slide:     0x0000000015e00000
Kernel text base: 0xffffff8016000000
__HIB  text base: 0xffffff8015f00000
System model name: MacBookPro15,1 (Mac-937A206F2EE63C01)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

System uptime in nanoseconds: 57850636261
last loaded kext at 55338187126: com.apple.driver.AppleGraphicsDevicePolicy	4.1.30 (addr 0xffffff7f9a7c8000, size 86016)
loaded kexts:
(none)
panic(cpu 4 caller 0xffffff8016241eb1): "IPI timeout, unresponsive CPU bitmap: 0x4, NMIPI acks: 0x0, now: 0x1, deadline: 57850152745, pre-NMIPI time: 0xd78234802, current: 0xd782aae2d, global: 1"@/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.0.103.151.1/osfmk/x86_64/pmap.c:2909
Backtrace (CPU 4), Frame : Return Address
0xffffff913acab680 : 0xffffff801613da1b mach_kernel : _handle_debugger_trap + 0x47b
0xffffff913acab6d0 : 0xffffff8016274aa5 mach_kernel : _kdp_i386_trap + 0x155
0xffffff913acab710 : 0xffffff801626658b mach_kernel : _kernel_trap + 0x4fb
0xffffff913acab760 : 0xffffff80160e4bb0 mach_kernel : _return_from_trap + 0xe0
0xffffff913acab780 : 0xffffff801613d107 mach_kernel : _DebuggerTrapWithState + 0x17
0xffffff913acab880 : 0xffffff801613d4eb mach_kernel : _panic_trap_to_debugger + 0x21b
0xffffff913acab8d0 : 0xffffff80168cd559 mach_kernel : _panic + 0x61
0xffffff913acab940 : 0xffffff8016241eb1 mach_kernel : _pmap_flush_tlbs + 0x841
0xffffff913acab9f0 : 0xffffff8016247afa mach_kernel : _pmap_remove_range_options + 0x36a
0xffffff913acabad0 : 0xffffff80162487a6 mach_kernel : _pmap_remove_options + 0x96
0xffffff913acabb30 : 0xffffff80161d54cb mach_kernel : _vm_map_destroy + 0x8eb
0xffffff913acabc80 : 0xffffff80161dce1e mach_kernel : _vm_map_remove + 0x5e
0xffffff913acabcb0 : 0xffffff80161d0766 mach_kernel : _kmem_free + 0x86
0xffffff913acabce0 : 0xffffff80167c8a0f mach_kernel : __ZN11OSSerialize4freeEv + 0x4f
0xffffff913acabd00 : 0xffffff801686bb8b mach_kernel : _is_io_registry_entry_get_property_bin + 0x1eb
0xffffff913acabd60 : 0xffffff8016225be4 mach_kernel : _iokit_server_routine + 0x6464
0xffffff913acabdb0 : 0xffffff8016143888 mach_kernel : _ipc_kobject_server + 0x238
0xffffff913acabe10 : 0xffffff801611a725 mach_kernel : _ipc_kmsg_send + 0x135
0xffffff913acabe70 : 0xffffff8016131135 mach_kernel : _mach_msg_overwrite_trap + 0x2e5
0xffffff913acabf00 : 0xffffff801624ca65 mach_kernel : _mach_call_munger64 + 0x205
0xffffff913acabfa0 : 0xffffff80160e5396 mach_kernel : _hndl_mach_scall64 + 0x16

BSD process name corresponding to current thread: WindowServer

EOF

 

 

Search in Clover GUI Option menu, I don't remember if is possible. You can also block temporarly AppleALC (Option/System parameters)

Share this post


Link to post
Share on other sites
On 9/11/2019 at 1:42 PM, matgeo said:

M trackpad lost with latest beta.

Voodooi2c not loading.

Same here in DP8.
sudo kextcache -u / did not help1363715758_Bildschirmfoto2019-09-14um20_13_25.thumb.png.bd74079f42ccfc33c2410b49ddb3645f.png

Edited by windowless31

Share this post


Link to post
Share on other sites
4 hours ago, eng_redaesm said:

 

after updating to dp8 i got this panic  and the strange thing is one time boot and one time panic any help appreciated 

 

219010925_WhatsAppImage2019-09-15at12_29_10AM.thumb.jpeg.66df56d9938887386b38bc17b8e1bd9a.jpeg

 

Remove panic log first.

Clover Find code    = 008a0284 c07447
Clover Replace code = 008a0284 c0EB47

1971260430_kernelpaniclog-rm01.jpg.bd33fcd9018759228f844e99eabf6d62.jpg

Share this post


Link to post
Share on other sites
8 hours ago, crazybirdy said:

 

Remove panic log first.

Clover Find code    = 008a0284 c07447
Clover Replace code = 008a0284 c0EB47

1971260430_kernelpaniclog-rm01.jpg.bd33fcd9018759228f844e99eabf6d62.jpg

 

this after applying what you said 

WhatsApp Image 2019-09-15 at 2.08.52 PM.jpeg

Share this post


Link to post
Share on other sites
1 hour ago, eng_redaesm said:

 

this after applying what you said 

WhatsApp Image 2019-09-15 at 2.08.52 PM.jpeg

Issue of /System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/IOBluetoothSerialManager.kext.

Try to find solution or just remove it and rebuild cache without it.

Share this post


Link to post
Share on other sites

n5mr7b.jpghgABrW.jpgPTcwXL.jpg

Le 13/09/2019 à 17h06, iGPU a déclaré:

Dans Mojave, AppleBusPowerController est correctement injecté dans EC (basé sur la version X299), simplement en déclarant le périphérique EC (voir attachehd SSDT). Voici comment il devrait apparaître: Pas d'EC0 ni d'AppleACPIEC en parallèle avec AppleBusPowerController (selon la recommandation de Vit9696 de ne pas être renommé Mac; voir également joint SSDT).

 

image.png.9dbff055210236d81d08260a65eb436a.png

 

Mais dans Catalina, utilisant le même SSD, ne contient pas AppleBusPowerController. Je sais que le SSDT fonctionne car je peux révéler ou supprimer le périphérique EC0 ou empêcher le périphérique EC d'apparaître. Mais peu importe les combinaisons que j'ai testées, AppleBusPowerController n'est pas injecté dans EC:

 

1494873829_OC-EC3.png.cf81b7aacf8e631fa5cf2f703e79111c.png

 

Existe-t-il un moyen d'injecteur AppleBusPowerController dans EC à Catalina? Merci.

SSDT-X299-EC0-USBX.aml

 

Edited by pg7

Share this post


Link to post
Share on other sites
On 9/14/2019 at 10:31 PM, Matgen84 said:

 

Search in Clover GUI Option menu, I don't remember if is possible. You can also block temporarly AppleALC (Option/System parameters)

When I disabled AppleALC, I was able to enter the system smoothly, but when I used AppleALC and injected the id, I got a kernel panic. Vit9696 said that this is not a problem with AppleALC. At present, I don't know how to solve it.

Share this post


Link to post
Share on other sites
4 hours ago, xiaoM4095 said:

When I disabled AppleALC, I was able to enter the system smoothly, but when I used AppleALC and injected the id, I got a kernel panic. Vit9696 said that this is not a problem with AppleALC. At present, I don't know how to solve it.

 

What codec do you have?

Type F2 in Clover GUI for Preboot.log. What is your EFI Folder?  and post it.

 

Please, complete your signature (CPU, mobo, etc...).

 

Share this post


Link to post
Share on other sites
6 hours ago, xiaoM4095 said:

When I disabled AppleALC, I was able to enter the system smoothly, but when I used AppleALC and injected the id, I got a kernel panic. Vit9696 said that this is not a problem with AppleALC. At present, I don't know how to solve it.

One of the possible solution is to use VoodooHDA.kext without AppleALC.

Share this post


Link to post
Share on other sites
On 9/17/2019 at 1:48 PM, Matgen84 said:

 

What codec do you have?

Type F2 in Clover GUI for Preboot.log. What is your EFI Folder?  and post it.

 

Please, complete your signature (CPU, mobo, etc...).

 

I am very sorry, I have been busy on the forum recently. This is the attachment you need.

Preboot.txt

EFI.zip

On 9/17/2019 at 3:49 PM, Slice said:

One of the possible solution is to use VoodooHDA.kext without AppleALC.

I got the same kernel panic using VoodooHDA.kext.

Share this post


Link to post
Share on other sites
2 hours ago, xiaoM4095 said:

I am very sorry, I have been busy on the forum recently. This is the attachment you need.

Preboot.txt

EFI.zip

I got the same kernel panic using VoodooHDA.kext.

 

What codec do you have? Necessary to know what layout-id

 

Please, complete your signature (Desktop or Laptop, CPU mobo, etc...).

Edited by Matgen84

Share this post


Link to post
Share on other sites
31 minutes ago, Matgen84 said:

 

What codec do you have? Necessary to know what layout-id

 

Please, complete your signature (Desktop or Laptop, CPU mobo, etc...).

My sound card model is ALC236, and the layout-id used is 18.

codec#0.txt

Share this post


Link to post
Share on other sites
58 minutes ago, xiaoM4095 said:

My sound card model is ALC236, and the layout-id used is 18.

codec#0.txt

 

Yes. Layout-id is 18 in AppleALC/Ressources. You can try others Layout-id for your codec using boot-args: e.g alcid=layout — to set value layout-id (cf AppleALC Wiki)

 

before, do you already rebuild kernel and kext cache?

 

Your laptop is  Lenovo Legion Y530-15ICH? If Yes, for Lenovo, codec = realtek ALC3240!!!

 

Take a look: a link for Lenovo Legion Y520. config.plist or this one for Y530 EFI Folder (Feb '19)

Edited by Matgen84

Share this post


Link to post
Share on other sites

Update from DP7 to DP8 went smoothly on a Thinkpad X260. Indeed, rebuilding kext cache from Mac OS proved problematic, I had to boot into recovery, delete the prebuilt kernel cache and rebuild using kextcache -u. It now seems to work fine.

 

Everything still works, but brightness range is limited - AppleBacklightInjector loads but doesn't seem to be working - or something change in AppleBacklight and we need a new kernel patch for Clover to enable full brightness range.

 

EDIT: Well, even though WhateverGreen's backlight patches did not work for me in the past, they now seem to do so fine. So in essence removing the injector + clover patch and letting WEG do its thing works in giving me full brightness range.

Edited by silencer51

Share this post


Link to post
Share on other sites

Hi guys,

 

Anyone else having wake issues with RX cards and Catalina Beta 8? This used to work before. Now it just doesn't anymore. System goes to sleep just fine. But it just doesn't wake up graphics after sleep. Same config.

 

Update: I disabled Inject Intel. Now it does wake up the screen, but can't move the mouse pointer, and keyboard seems to be stuck, as well. Everything is pretty much frozen.

 

I feel this has to be related to the iGPU. And...after fiddling around with the ig-platform-id, I'm pretty sure that's the cause. Thing is...the same ig-platform-id (for headless connection) used to work before. I just don't know what to change now to make it work again...

Edited by arsradu

Share this post


Link to post
Share on other sites
On 9/20/2019 at 2:53 PM, Matgen84 said:

Your laptop is  Lenovo Legion Y530-15ICH? If Yes, for Lenovo, codec = realtek ALC3240!!!

I have no problems at 10.13.6-10.14.6, only there is a problem at 10.15, I am sure my sound card model is ALC236.Very strange, I injected the layout-id in 10.15 and I got a kernel panic.

On 9/20/2019 at 2:53 PM, Matgen84 said:

Take a look: a link for Lenovo Legion Y520. config.plist or this one for Y530 EFI Folder (Feb '19)

I recommend this EFI, haha.

Share this post


Link to post
Share on other sites
19 minutes ago, xiaoM4095 said:

I have no problems at 10.13.6-10.14.6, only there is a problem at 10.15, I am sure my sound card model is ALC236.Very strange, I injected the layout-id in 10.15 and I got a kernel panic.

I recommend this EFI, haha.

 

I recommend to contact AppleALC developer :hysterical:

Share this post


Link to post
Share on other sites
23 hours ago, Matgen84 said:

 

I recommend to contact AppleALC developer :hysterical:

 

7 hours ago, Slice said:

I don't think so. He has the issue also with VoodooHDA so the problem is elsewhere.

I have already fed back the question to vit9696, but vit9696 said that this is not a problem with AppleALC.

Share this post


Link to post
Share on other sites
13 hours ago, xiaoM4095 said:

 

I have already fed back the question to vit9696, but vit9696 said that this is not a problem with AppleALC.

In my Z87 hackintosh at 10.14.5/10.14.6/10.15.betas previous working RTL8111.kext/Lilu.kext/AppleALC.kext in /EFI/Clover/kexts/Other need put in /System/Library/Extensions , otherwise both RTL8111G networking and ALC-1150 failed to load.

Please try this way to see whether it works for you.

Share this post


Link to post
Share on other sites

the best value for disable SIP in Catalina beta8 is 

 

<key>CsrActiveConfig</key>
<string>0x3E7</string>

 

We have all of the infos in TERMINAL WINDOW with csrutil status

 

1946869752_Sanstitreq.png.bcaed23443f295e8b57cf5049e247aa1.png

 

 

See result of installing kext in SLE

2102879913_Sanstitre.thumb.png.2223e826e384027c45be61f2882f012b.png

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NikTheNoob
      Hi,
       
      I'm rather new to Hackintosh and trying my first build with OpenCore on AMD, but I run into issues causing OpenCore to crash before even loading the macOS installer. As I'm not sure which one is causing the crash, I'm trying to resolve all of them and one of the error messages has to do with WhateverGreen, which I was able to see in this slow-mo loading video. Basically I'm getting an error that I'm running an unsupported processor, even though I think I was following this guide by the step.
      What could be causing this and what do I need to do to resolve it?
       
      CPU: AMD Ryzen 2700X
      MB: Gigabyte Aorus X470 Ultra Gaming
      Memory: 4x8 GB HyperX Predator, 3000 MHz Cl15
      Storage: Samsung Evo 970 Nvme 512 GB, Crucial MX500 500GB SATA
      GPU: MSI Radeon RX580 GamingX 8GB
    • By tonyx86
      This thread for installing Catalina on the Dell Latitude E6410 WITH NVIDIA GRAPHICS (BIOS A17, NVidia 3100m) will help you install a fresh installation of Catalina on your Dell Latitude E6410, it will help you upgrade from 10.15.2 to 10.15.3 (if you originally installed Catalina from this thread) and it will also help you upgrade from Mojave 10.14.6 if you have already installed Mojave by following the instructions here.  The instructions in this first post assume that you are installing Catalina in an APFS container.  If you are curious about the evolution of this solution and how sleep/wake was solved, review the Mojave installation thread.
       
      Important: This Thread is NOT intended to help you install macOS on a Latitude E6410 with Intel HD Graphics (without Nvidia graphics).  The DSDT attached to this first post (in E6410-Catalina.zip) is VERY SPECIFIC to the Nvidia graphics implementation and has not been edited for HD Graphics - there are elements required for HD Graphics that are missing from the attached DSDT and there are DSDT mods that have not been tested with HD Graphics.  Also, the kexts attached to this first post are specific to a Broadcom Wi-Fi card which must replace the original Intel Wi-Fi card.
       
      This first post will be modified to reflect lessons learned and to reflect the most current working state of my Latitude E6410 (with NVidia 3100m discrete graphics) running Catalina.  Issues, observations and performance tips are recorded toward the bottom of this first post.  My recommended CLOVER configuration is specified toward the bottom of this first post.
       
      *** If you want help with your installation, please post your issue along with problem reporting files generated using @black.dragon74's problem reporting tool.  Google 'GENERATE PROPER PROBLEM REPORTING FILES black.dragon74' to find it. ***.  If Catalina's Read-Only protections block your installation of black.dragon74's gen_debug script, please copy the attached gen_debug script to your Desktop, change script properties with the terminal command 'chmod a+x ~/Desktop/gen_debug' and run the script from your Desktop.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) Wi-Fi: Broadcom BCM 94352HMB (replaced original Wi-Fi card) BIOS (version A17) configured as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC:Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace:Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;   
      Versions of the software used in this installation are listed below the installation steps.  EFI and kexts for Catalina are attached to this first post in E6410-Catalina.zip.  CLOVER configuration is specified below the installation steps.
       
      Wi-Fi connection to an Access Point is delayed when using AppleALC for sound.  Do not use Apple ALC.  Use VoodooHDA pkg 2.9.2 v14 for sound.
       
      Steps to install Catalina on a Dell Latitude E6410 (BIOS A17, NVidia 3100m)
      Make sure that your system matches my system description above (including BIOS version, Wi-Fi card, BIOS settings) If performing an upgrade from Mojave or a previous version of Catalina, backup your Mojave or Catalina partition! (Carbon Copy or similar) Download Catalina Installer Download DosDude Catalina Patcher Use DosDude Patcher to create Catalina USB Installer Delete LegacyUSBInjector.kext (we're using @RehabMan's USBInjectAll.kext with custom SSDT) and delete SIPManager.kext (CLOVER is managing SIP) from Catalina USB Installer's /Library/Extensions folder Copy all but the FakeSMC sensor kexts in E6410-Catalina.zip (attached) LE folder to the Catalina USB Installer /Library/Extensions (copy all kexts (including FakeSMC.kext) but not the FakeSMC sensor kexts) Install CLOVER Bootloader (Legacy) on USB Installer using the EFI in the E6410-Catalina.zip (attached).  Use the CLOVER configuration specified below.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Reset your Latitude E6410 NVRAM by doing the following (this may be important if you're making changes to your existing EFI and won't hurt anything if you're not making any changes) turn-off your laptop remove A/C power and main battery press and hold the power button for 30 seconds restore A/C power and battery Boot your Latitude E6410 from the Catalina USB Installer that you created in steps 5-8. Select "Reinstall macOS" (note that I have existing installations of Mojave and High Sierra on my Latitude E6410, so it's possible that this menu item changes to "Install macOS" if you don't have any previous macOS installations). Select your Catalina destination partition (which will be your Mojave or previous Catalina partition if you are upgrading) After the Catalina Installer reboots the first time, boot from the "macOS Installer" partition on the disk that you selected as your Catalina destination (not the macOS installer on the USB) After the Catalina Installer reboots the second time, boot the Catalina macOS Installer on the USB Select the Post Install Patcher utility Select only the following Post Install Patches (no other patches / options) Install Patch Updater Legacy Video After the Post Install Patcher reboots,  boot from the newly installed (or upgraded) Catalina partition and complete the macOS configuration Remove these kexts (if they exist) from /Library/Extensions: LegacyUSBInjector.kext, LegacyUSBVideoSupport.kext and SIPManager.kext If you are performing a fresh installation of Catalina: Install CLOVER on your boot disk and configure EFI using files in the attached E6410-Catalina.zip.  Use the CLOVER configuration below.  Your EFI Clover/kexts/Other folder needs only FakeSMC.kext, IntelMausiEthernet.kext, USBInjectAll.kext and VoodooPS2.kext.  Be sure to replace the XX-MASKED-XX parameters in the attached config.plist with your own values. Install all kexts in the attached E6410-Catalina.zip LE folder to your /Library/Extensions folder.  NOTE: These instructions assume installation of Brcm kexts in /Library/Extensions.  Read the Brcm install instructions if you're installing kexts in EFI/Clover/kexts/Other, since your installation and at least one kext WILL BE DIFFERENT. Copy HWMonitor from the application folder in the attached E6410-Catalina.zip to your Applications folder. Install VoodooHDA (I installed using the Classic method) Skip to Step 21 If you are upgrading from a previous version of Catalina using the instructions from this thread or from Mojave that you installed using the instructions here: Update Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /Library/Extensions) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. NOTE: These instructions assume installation of Brcm kexts in /Library/Extensions.  Read the Brcm install instructions if you're installing kexts in EFI/Clover/kexts/Other, since your installation and at least one kext WILL BE DIFFERENT. Update IntelMausiEthernet.kext Remove VoodooSDHC.kext from /Library/Extensions Re-install VoodooHDA if necessary (I installed using the Classic method) Ensure PROPER kext installation: If you're manually installing kexts in /Library/Extensions, make sure that you execute the following (in terminal) cd /Library/Extensions sudo chown -R root:wheel *.kext sudo chmod -R 755 *.kext sudo kextcache -i / After you execute 'sudo kextcache -i /' you should observe that ALL kexts are allowed.  If not, your kext directory attributes are probably incorrect.  Repeat kext installation and try again. Reboot from your new/upgraded Catalina partition Welcome to macOS Catalina! Change the keyboard type to ISO (System Preferences > Keyboard > Change Keyboard Type) Swap the Command and Option keys (System Preferences > Keyboard > Modifier Keys) Set hibernatemode: In terminal, execute sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo touch /var/vm/sleepimage sudo chflags schg /var/vm/sleepimage  
      Version Info at the time of this writing:
      Catalina Installer 10.15.3 CLOVER v2.5k r5103 DosDude Catalina Patcher: v1.3.0 Lilu.kext 1.4.1 AirportBrcmFixup.kext 2.0.6 BrcmFirmwareRepo.kext 2.5.1 BrcmBluetoothInjector.kext 2.5.1 BrcmPatchRAM3.kext 2.5.1 IntelMausiEthernet.kext 2.5.0
      VoodooHDA.kext 2.9.2 v14 (NOT AppleALC)
       
      What is not working (that was working in Mojave)
      SD Card Slot (had to remove VoodooSDHC.kext which caused system freeze on wake)  
      Known Issues and Their Solutions
      (No solution yet) Brightness slider does not work in System Preferences > Displays.  Brightness is easily controlled with Dell brightness keys.  There is some work on this later in this thread, but I will not be solving this as I'm content with the Dell brightness keys (and Ambient Light Sensor works to auto-adjust brightness). I continue to refine the DSDT and CLOVER config.plist to optimize my Latitude E6410 for multi-booting between various macOS versions (High Sierra, Mojave and Catalina at the time of this writing). If you upgrade your Latitude E6410 EFI using my attached EFI, you may find that your Latitude E6410 is stuck in a boot-loop that ends in a white screen and reboots.  Clear your system by doing the following: turn off your laptop, remove A/C power, remove the main battery, press and hold the power button for 30 seconds, restore A/C power and battery, boot normally.  I have only found this to be necessary (very rarely) after making an EFI change, but you may find it helpful if making kext changes in /Library/Extensions as well. (Work-around - no permanent solution yet) Cannot turn on Bluetooth after shutting-down with Bluetooth off.  Work-around is to leave Bluetooth on.  I don't use Bluetooth and don't mind, so this will likely be solved by someone else.  If you experience this issue and can't turn-on Bluetooth, I have found that putting the laptop to sleep (Fn-F1) and then waking the laptop restores proper operation of Bluetooth.  I have posted a problem description, logs and problem reporting files in this thread for help with this problem. (Solved - no further work required) Laptop does not sleep when closing lid.  Solution is to add a Notify (LID0) code to Method (BTNV) in the DSDT.  No surprise that the Latitude E6410 has yet another incomplete ACPI implementation.  I am using the same EFI for High Sierra 10.13.6, Mojave 10.14.6 and Catalina 10.15.3 and it works in all three macOSes. (No solution yet) No SD Card Slot (had to remove VoodooSDHC.kext) - I read somewhere that there is a solution that does not require any kexts (just a DSDT edit).  Haven't yet implemented this fix. (Not a problem that needs to be solved - leaving for historical purposes.  I am running Catalina without this.) - IOHWControl does not load under GFX0 (as observed in IORegistryExplorer).  Solution (if it needs to be solved) is to install AppleHWSensor.kext from a DosDude-patched Mojave /S/L/E in Catalina's /L/E.  Copy and install your own or use the kext attached to this post. (Solved - no further work required) Wi-Fi connection is delayed until a minute or so after boot - Use VoodooHDA and NOT AppleALC (Solved - no further work required) External USB ports do not work after waking from sleep (S3) - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Boot and shut-down time of Catalina is slower than Mojave - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Wi-Fi is not immediately available at OS startup - Upgrade Lilu.kext and replace BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext (in /L/E) with latest BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext. (Solved - no further work required) Laptop freezes on wake - Remove VoodooSDHC.kext from /Library/Extensions  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z (I haven't noticed this issue for a while since I completed DSDT edits for Mojave, but keeping this here for historical purposes)  
      CLOVER Installation: Use these configuration options
      Install Clover in the ESP Boot Sectors Install boot0af in MBR Clover for BIOS (legacy) booting Clover EFI 64-bits SATA BIOS Drivers, 64-bit Recommended drivers FSInject File System drivers ApfsDriverLoader Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane After clicking "Continue", if prompted with "This Clover package is incompatible with this version of macOS," install anyway  
      After CLOVER installation is complete Copy the following from the attached E6410-Catalina.zip ACPI patched contents config.plist (change XX-MASKED-XX values to your own) kexts/Other (remove all other kext folders) Remove christmas and new year folders from themes (if present)  
      Credits
      Thanks to those who contributed to my Mojave solution and to the DosDude team (for the incredible macOS patchers), I think this Catalina installation was the easiest macOS installation that I have experienced (so far).  Many thanks to @Slice and his team for the incredible work on CLOVER and for continuing to support old legacy systems like this.  Also, thanks to @Mieze and @headkaze and others I'm sure for maintaining the Brcm kexts.  And finally, I still prefer to manually apply patches to the DSDTs in my systems.  CLOVER offers extensive patching functionality, but I'm old-school and like to have an error-free, fully-patched DSDT with a simple CLOVER config.plist.  I think that this manual DSDT patching approach (which required an extensive review and debugging of the original unpatched DSDT in this thread) is the reason that this Latitude E6410 is such a perfect MacBookPro6,2.  Thank you @RehabMan for being a great teacher and for always insisting on problem reporting files .
       
       
       

      AppleHWSensor.kext.zip

      gen_debug
      E6410-Catalina-3v5.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
    • By ltooz_audis
      Some people do have problem understanding AppleALC, how to use it for their own codecs. Here's how I used it for both Realtek ALC and IDT audio codecs.
      https://youtu.be/ZNUzQkb6p5g
      For more info on Catalina click here.
      Cheers,
      Louis
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
×