Jump to content

1,149 posts in this topic

Recommended Posts

Advertisement
4 hours ago, tikizondo94 said:

Im running into this same issue with the latest beta on my Dell 7559. First beta worked fine. But now it auto shuts down during boot. Same verbose output. I have not been able to locate the ".early_boot.plist" within EndpointSecurtiy kext. Any other ideas?

 

I believe this was addressed already.  I had the same problem and it turned out to be the SMCBatteryManager.kext for VirtualSMC.  Until it gets updated, you can use FakeSMC with RehabMan's ACPIBatteryManager.kext.

Share this post


Link to post
Share on other sites
39 minutes ago, mnfesq said:

 

I believe this was addressed already.  I had the same problem and it turned out to be the SMCBatteryManager.kext for VirtualSMC.  Until it gets updated, you can use FakeSMC with RehabMan's ACPIBatteryManager.kext.

You are the man! Thank you. My bad for asking about an already addressed issue. Thanks @mnfesq

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, asdesoso said:

About Driver Extensions (.dext) comparison with .kexts

 

I think this pdf is a great information for our hackintoshes.

 

macOS 10.15 will be the last release to fully support kexts without compromises (Page 87).

yes, this means that we have to port all the kexts we care about to the new model and possibly make some kernel hacks to still use the older ones, we are safe until apple removes the iokit code from the kernel

Edited by ITzTravelInTime

Share this post


Link to post
Share on other sites
5 hours ago, MorenoAv said:

I hope that this is only a bug... :yes:

First..

$ killall Finder

Then goto it's Preferences

Share this post


Link to post
Share on other sites
7 hours ago, arsradu said:

 

Try to change the ig-platform-id on your iGPU patch. Had the same issue on Haswell on my desktop, managed to fix it thanks to @polyzargone here who suggested switching to a headless ig-platform-id. That fixed it right up for me. My guess is the issue is the same on your rig (iGPU related). But most likely the ig-platform-id is gonna be different.

any you suggest for HD520?  CPU is 6100u, using 0x19160000 right now

Share this post


Link to post
Share on other sites
Posted (edited)
50 minutes ago, thesuffering said:

any you suggest for HD520?  CPU is 6100u, using 0x19160000 right now

 

Not sure...but you can try this one for example: 

0x19160002

You can also choose others for Skylake from here. Also, for Catalina, Lilu & WEG need to be either updated to unreleased versions (newest possible, not newest available), ooor you can use -lilubetaall boot flag.

Edited by arsradu

Share this post


Link to post
Share on other sites
13 hours ago, hardcorehenry said:

The only issue with sleep on my haswell Catalina is that wakes directly into desktop without login screen, but it will be probably fixed with next betas.

Can you show me your config incl. kexts please? Still stuck on a freezing system after wake

 

Many thanks in advance

 

URBANsUNITED

Share this post


Link to post
Share on other sites
Posted (edited)
On 7/2/2019 at 6:52 PM, headkaze said:

It looks like beta 3 has solved my issue with excessive logging causing performance issues.

 

I think the debug level in Catalina beta 1 and 2 was set too high (or some kext's were compiled with excessive logging). For example I was getting log messages for every in report received by my KVM hid device:

 


2019-06-20 08:52:06.122905-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.152892-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.182884-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.212887-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.242914-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.272910-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.302911-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.319939-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x100000456] CompleteInReport actualByteCount:4
2019-06-20 08:52:06.332902-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.362919-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.392912-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.422917-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15
2019-06-20 08:52:06.423924-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x100000456] CompleteInReport actualByteCount:4
2019-06-20 08:52:06.452930-0700 localhost kernel[0]: (AppleUserHIDDrivers) [<private>:756][HIDDriverKit][0x10000045d] CompleteInReport actualByteCount:15

 

Hi, need your advice.

I am on Catalina b2.

Trying to get my Intel HD 540 working on Skylake Intel i7-6520U.

I need Framebuffer dump.

Downloaded Lilu and WEG latest Debug versions. Put them in Clover/Kexts/Others. Both Kexts are loading. With fake ig-platform-id=0x12345678. I checked with kextstat.

I use -igfxdump in bootarg. After I modify config.plist, use FB properties from Mojave and no ig-platform-id. After booting it goes to black screen. At least after I should have igfx dump, but I don't see it. Does Hackingtool works with Catalina, cause I don't see this option for Framebuffer? Where Framebuffer dump should go? To Catalina, or Catalina-Data?

Thanks

 

 

Edited by valeryimm

Share this post


Link to post
Share on other sites
6 hours ago, URBANsUNITED said:

Can you show me your config incl. kexts please? Still stuck on a freezing system after wake

 

Many thanks in advance

 

URBANsUNITED

I'm now on OpenCore bootloader so my config won't help. VirtualSMS contain plugins.1815795684_ScreenShot2019-07-05at14_43_08.png.fbb34b5de35efbe68f45ad40ba8f722c.png

Share this post


Link to post
Share on other sites
Posted (edited)
23 minutes ago, hardcorehenry said:

yep. PentiumG3220Haswell

please help me i can't run OC 

processor pentium G4400 skylake

motherboard gigabyte H110M

Gpu nvidia gt710

Edited by mashuk12

Share this post


Link to post
Share on other sites
Posted (edited)
2 hours ago, mashuk12 said:

please help me i can't run OC 

processor pentium G4400 6th gen 

motherboard gigabyte H110M

Gpu nvidia gt710

I'm not sure if you are able to boot with fake CPUID. I didn't try. To boot my catalina I needed Fake haswell family patch in my kernel patch section. Sorry, I'm not able to help you with Fake Skylike family patch. You'd have to ask @PMheart or @Meowthra to help you.

Edited by hardcorehenry

Share this post


Link to post
Share on other sites
6 hours ago, Andrey1970 said:

VSMC 1.0.6 

Fixed SMCBatteryManager with 10.15beta3

 

I tried out this version of VirtualSMC and, while it allowed my laptop to boot and detect the battery, I lost my CPU frequency sensor (but only in Catalina b3).  It works just fine with my Mojave installation.

Share this post


Link to post
Share on other sites
20 minutes ago, mnfesq said:

 

I tried out this version of VirtualSMC and, while it allowed my laptop to boot and detect the battery, I lost my CPU frequency sensor (but only in Catalina b3).  It works just fine with my Mojave installation.

VSMC does not contain the frequency sensors. Frequency requires IPG, but IPG does not work with 10.15

Share this post


Link to post
Share on other sites
1 hour ago, Andrey1970 said:

VSMC does not contain the frequency sensors. Frequency requires IPG, but IPG does not work with 10.15

 

I have used VirtualSMC.kext and IPG.. Frequency is detected and IPG is working too in Catalina DP 3

Screen Shot 2019-07-06 at 02.55.16.png

Share this post


Link to post
Share on other sites
7 hours ago, valeryimm said:

HAfter booting it goes to black screen. At least after I should have igfx dump, but I don't see it. Does Hackingtool works with Catalina, cause I don't see this option for Framebuffer?

The data is already available in Hackintool so you don't need to dump it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By eliot6001
      I don't know whether my LAN device will work on MAC and Which version of mac but i still want to run MAC on my PC, Also i checked my CPU-GPU and it turned out that i can Run MAX High sierra but i realized that some people have trouble with Sound and Internet connection so Here's the NAME of my LAN device:
       
      PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05\4&45F2A70&0&00E1 as (LAN DEVICE took the name from device manager in  windows). 
      also from compatibleIds i got this:
      PCI\VEN_10EC&DEV_8136&REV_05
       
      Is it Supported on any version of macOS ?
    • By Aldaro
      I have been running macOS Mojave on my system for 3 months and everything was working pretty well.  After taking an update for clover, my entire system got wrecked, and I cannot even boot to an installation environment anymore (which I really need to do since I am starting back at square one).  I still have the old EFI folder backed up, but I know it'll only be a matter of time before Apple introduces an update that requires me to update Clover in order to work correctly.  I have tried all the available memory fixes, but none of them seem to work.  I was previously using the original osxaptiofix; so, I gave v2, and v3 a try, but to no success.  I read somewhere on the main discussion board for clover that AptioMemoryFix was no longer going to be supported and I therefor decided to skip over it (not to mention it isn't even available in newer clover installation packages).
       
      System specs:
      Motherboard: GIGABYTE Z390 M GAMING
      CPU Intel core i5 9600k @ stock 3.7GHz
      RAM 32GB DDR4 2667MHz
      GPU AMD Radeon RX 580 with 8GB of GDDR5
      SSD Intel 660p 512GB NVME
      NIC: Intel i210 10/100/1000 as it is natively supported in macOS
       
      I have been using the iMac 19,1 SMBIOs as I built this machine to match it as close as humanly possible.  As for my UEFI settings, I did the usual:
      Disabled Windows specific features and secure boot
      Enabled XHCI hand off
      Enabled Above 4G decoding
      Disabled onboard NIC since it is made irrelevant by my intel i210
       
      --INJECT KEXTS--
      FakeSMC
      Lilu
      WhateverGreen
      AppleALC
      USBInjectAll -- WITH PATCHED SSDT in /EFI/CLOVER/ACPI/patched
      Below are images of the errors I am receiving when trying to boot the macOS Mojave installer.
       
      with original osxaptiomemoryfix

       
      osxaptiofixv2

       
      osxaptiofixv3

       
      Anyway, if somebody can help me figure out what's going on, that'd be greatly appreciated.  My ultimate goal is to get an install with minimal clover patches as to be better prepared when the winds of change from Apple come roaring.
       
      p.s: I have also attached a copy of my EFI folder
       
       
      EFI.zip
    • By kalpesh2804
      Laptop Inbuilt Wifi and Battery Indicator not working in Catalina. (HP Pavilion 15t-au 100 Laptop)
       
       
      Laptop Config:
      HP Pavilion 15t-au100 * i7-7500u 2.90Ghz * Intel HD 620 Graphic Adapter * Intel Dual Band Wireless AC-3168 * Kingston SATA3 SSD 500 GB * HP Camera
×