Jump to content
fantomas

[pre-release] macOS Catalina

1,735 posts in this topic

Recommended Posts

3 minutes ago, arsradu said:

 

You're not the only one. Right now, I would say this looks like a bug with Catalina, and I think it will be fixed with future updates. It's not really a big issue to me. So, if you're not in a hurry, maybe wait for the next updates and see if the issue gets fixed.

Thanks for the notice.

Share this post


Link to post
Share on other sites
Advertisement
On 6/3/2019 at 8:45 PM, fantomas1 said:

Beta 2 working on X99 5960X

ASUS X99 E WS

Sending my EFI. Please take care of serial number.

All bacK USB ports working @ the right speed. Also two front USB 2.

Best 

 

 

 

 

EFI.zip

Share this post


Link to post
Share on other sites
On 6/6/2019 at 10:35 AM, kidooe said:

 

just apply this patch in your config.plist 

Is your graphics acceleration working? I have the same CPU and can only boot without acceleration.

Share this post


Link to post
Share on other sites
22 minutes ago, Sherlocks said:

still not working?

나의 SM-N960N 의 Tapatalk에서 보냄
 

Yes it works, as i said above, no more Lapic panics, boots 10.15.0.19A487l correctly.

 

No problems anymore

 

Also, can anyone post the fakesmc.kext that boots Catalina.

Does the Mojave version boot the Catalina or is there a new one available.

 

Thanks and regards

 

Share this post


Link to post
Share on other sites
8 minutes ago, macq said:

Yes it works, as i said above, no more Lapic panics, boots 10.15.0.19A487l correctly.

 

No problems anymore

 

Also, can anyone post the fakesmc.kext that boots Catalina.

Does the Mojave version boot the Catalina or is there a new one available.

 

Thanks and regards

 

fakesmc.kext is the same that MOJAVE :)

FakeSMC.kext.zip

Edited by arcade33

Share this post


Link to post
Share on other sites

updated from software update. Night Shift does not work. KP after wake up from sleep

Kernel Extensions in backtrace: com.apple.iokit.IOGraphicsFamily(557.0)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f8d3fc000->0xffffff7f8d44bfff

dependency: com.apple.iokit.IOPCIFamily(2.9)[A9910C15-795F-33DB-9D91-807A41269356]@0xffffff7f8a6a7000

com.apple.driver.AppleHDAController(283.13)[072BC69C-694B-3921-A7C6-7E4982A2ECFF]@0xffffff7f8d661000->0xffffff7f8d67cfff

dependency: com.apple.iokit.IOPCIFamily(2.9)[A9910C15-795F-33DB-9D91-807A41269356]@0xffffff7f8a6a7000

dependency: com.apple.iokit.IOAudioFamily(300.2)[36458D20-C250-375B-9978-7F4E536DD8C6]@0xffffff7f8bbea000

dependency: com.apple.iokit.IOHDAFamily(283.13)[5BBCFD57-A34D-3AF5-990F-AAF8391C86F1]@0xffffff7f8d655000

dependency: com.apple.iokit.IOGraphicsFamily(557)[21B2E1AE-9952-3C62-B79A-F44C9D333EF4]@0xffffff7f8d3fc000

1015185670_CapturadePantalla2019-06-20ales18_49_59.png.1efb5c0335ee584a1795f1772b884932.png 

1889093324_CapturadePantalla2019-06-20ales19_11_28.png.cfc814a1a50b1d33f22b7d6bdee62ae7.png

Edited by Pharuk
Update

Share this post


Link to post
Share on other sites

please share your efi iam pentium user but can't boot 

22 hours ago, hardcorehenry said:

Macos Catalina installed with Open Core on very unsupported graphic Radeon and Pentium CPU. Thanks @ASentientBot for your patch and of course Open Core Developers for your amazing work.524407296_ScreenShot2019-06-19at19_59_53.png.78bf9e46e504b857f263c667059e764f.png2052305910_ScreenShot2019-06-19at20_01_03.png.1a9b29669b20ab03a45e3030e73c774e.png

please share your efi iam pentium user but can't boot without fakecpuid

plese share 

Edited by mashuk12

Share this post


Link to post
Share on other sites
10 hours ago, arsradu said:

Hi there! :) 

 

Quick question: are you using HDMI or DP with your RX 580?

 

I'm using mainly the HDMI output but also tried DP and they both work the same.

Share this post


Link to post
Share on other sites

is anyone else having issues (specifically with adobe apps) they lost the icons on the update to beta 1. and then lost the icons again on the beta 2 update :(

Share this post


Link to post
Share on other sites
Just now, polyzargone said:

 

I'm using mainly the HDMI output but also tried DP and they both work the same.

Yep...I just tried HDMI...and I've got the exact same issue. :))) So...I'm back to WTF is going on here? :))

Share this post


Link to post
Share on other sites
1 minute ago, arsradu said:

Yep...I just tried HDMI...and I've got the exact same issue. :))) So...I'm back to WTF is going on here? :))

 

Is your iGPU enabled?

Share this post


Link to post
Share on other sites
Just now, polyzargone said:

 

Is your iGPU enabled?

Uhm... it is, cause I need it for Preview and QuickLook. Yours isn't?

Edited by arsradu

Share this post


Link to post
Share on other sites
7 minutes ago, arsradu said:

Uhm... it is, cause I need it for Preview and QuickLook. Yours isn't?

 

It is too.

 

What ig-platform-id did you set?

Edited by polyzargone

Share this post


Link to post
Share on other sites
3 minutes ago, polyzargone said:

 

Yes.

 

What ig-platform-id did you set?

I'm using 0x0d220003. Same one I'm using with Mojave (no issues there). Same config, so, of course all the settings are exactly the same.

Share this post


Link to post
Share on other sites

What is lapic? And is it possible to boot Catalina dp2 with "12345678" and whatevergreen?

Share this post


Link to post
Share on other sites
10 hours ago, fantomas1 said:

 

And how it is going with 0x67?

 

It is the same.

 

In fact, I realized that it fails if you're trying to use the command right after a fresh boot/reboot but oddly, it succeeds after a while. I don't really know what's going on but it seems that the system needs a moment to allow write access to the protected folders such as /System or /Library.

 

Again, this is non-sense to me but I'm definitely not an expert on the matter :D!

Share this post


Link to post
Share on other sites
5 hours ago, Sherlocks said:

hi hp laptop users.

please test lapic fix on beta2 and mojave.

NEW LAPIC FIX.zip

Didn't work on my HP 250 G5. Of course I have Kernel LAPIC=true in config.plist/KernelAndKextPatches.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      This guide is a work in progress and will be updated as I refine the installation.
       
      Background
      This is my first "modern" hack supporting UEFI and my first hack using Clover "on-the-fly" patches.  My previous hacks
       
      Laptop: Thinkpad T61 / Nvidia NVS 140m Laptop: Dell Latitude E6410 / Nvidia G3100m Desktop: Gigabyte G31 / GeForce 9600 Desktop: Biostar TH55HD / Sapphire Pulse RX580 (Google "Catalina Biostar TH55HD" and look for user name deeveedee)  
      are all perfectly running Catalina and I patched them all "manually" - all DSDT patches applied with MaciSL with virtually no Clover on-the-fly patching and all booted Legacy Clover.  This UEFI hack was MUCH easier and took about 20 hours vs. a combined hundreds of hours for the old hacks.  I wanted a hack that was a little more future proof and I think this is it.  I hope you enjoy this as much as I am enjoying it.  It is a perfect MacMini8,1.
       
      My system specs
      HP EliteDesk 800 G4 Mini (I7-8700T / UHD 630 / Q370 Chipset / 32GB DDR4 RAM) 3 x DP Ports (connected to monitors using DP -> DVI adapters) 6 x USB 3.1 1 x USB Type-C 3.1 2 x NVMe SSD (M.2 PCIe x4 2280/2230 combo ports) 1 x SATA6 SSD 1 x Intel Ethernet RJ-45 Conexant CX20632 Audio Codec SMBIOS MacModel MacMini 8,1 Unsupported M.2 PCIe x1 2230 Intel Wi-Fi (currently disabled in BIOS).  I may replace this with Brcm, but am using only Ethernet (IntelMausi) for now.  
      Installation Steps: To be provided
      See attached EFI and /L/E kexts in EliteDesk.zip archive See installation methodology here See references here  
      What is not working
      Wi-Fi / Bluetooth (intentional since I have not yet replaced my Intel card).  
      What is not tested
      USB c 3.1 port Microphone port  
      What is working
      Everything not mentioned above Sleep / Wake Multiple displays with IGPU graphics acceleration, hot pluggable display ports and DP->DVI adapters USB 3.1 ports Audio (internal speaker and headphone jack) Ethernet Auto-sensing headphone jack automatically switches to internal speaker when headphones removed  
      Known Issues and their solutions
      (Solved. Cycle power on the new display) A new display may not be detected if the new display is plugged into an unused display port while the HP EliteDesk 800 G4 Mini is sleeping. Solution is to cycle power on the new display after waking the EliteDesk 800 G4 Mini. Cycling display power on the newly added display causes displays to be re-detected. (Solved. Problem resolves itself after a few boot cycles) After applying the Catalina 10.15.5.02 supplemental update, Catalina booted to a single display.  After a few boot cycles, multi-display operation was restored to normal. (Solved and included in the attached EliteDesk.zip archive) Unable to upgrade from 10.15.4 to 10.15.5 when using IntelMausiEthernet.kext.  Solution is to switch to IntelMausi.kext (Rev 1.0.2 here). (Solved and included in the attached EliteDesk.zip archive) Some USB devices were not recognized. My SSDT-UIAC.aml was incomplete and did not specify all required USB port types (missing SSxx ports). The attached EliteDesk.zip archive includes this fix. (Reported this as a possible Clover issue - no solution yet) Clover boot loader may default to Recovery volume after a normal shutdown.  Work-around is to select your normal macOS volume.  This may only happen when Clover is configured to boot LastBootedVolume and may be "fixable" by explicitly setting a boot volume (haven't tested this). (No longer observed) At least one display blanks (sleeps) when plugging / unplugging USB device (observed in front USB 3.1 ports).  Display wakes immediately on keyboard and mouse activity, so this is a minor issue but may be indicative of another issue. (Solved - this is a BIOS setting and requires no macOS changes) Safari has problems loading insanelymac web pages after sleep / wake.  I suspect that the problem is with the embedded video on the pages.  Also observed video problem in AppStore after sleep/wake.  Console: VideoDecodersUnavailable.  Solution is to enable Intel ME in BIOS. (Solved and included in the attached EliteDesk.zip archive) Display does not fully wake after resuming from sleep (needs an extra mouse or keyboard stimulus to fully wake).  Solution is to change boot arg darkwake=0 to darkwake=2.  Other values of darkwake may work as well, but this is the first I tried and it worked. (Solved and included in the attached EliteDesk.zip archive) -disablegfxfirmware boot arg is not required with WEG.  I inadvertently left this boot arg after I encountered an endless gfx firmware update boot loop while working on my FB patching.  This boot arg is no longer necessary after completing FB patching with WEG. (Solved and included in the attached EliteDesk.zip archive): Sometimes, CMOS time is lost on shutdown or restart.  Solution is to enable Clover's Apple RTC fix in config.plist. (Solved and included in the attached EliteDesk.zip archive) headphone jack doesn't work.  Solution is to change HDEF layout-id to 28. (Solved and included in the attached EliteDesk.zip archive) System freezes on wake from sleep because of a kernel panic related to hda-gfx (my system does not have HDMI and my DP->DVI adapters do not drive monitor speakers).  Solution is to add No-hda-gfx property to HDEF as described here.  This property is recognized as a Lilu flag and prevents loading hda-gfx. (Solved and included in the attached EliteDesk.zip archive) Device (PMCR) is not defined.  Solution is a SSDT that "injects" the missing device. (Solved and included in the attached archive) eficheck is loaded (not sure why this is bad, but may be a privacy issue - see here). Solution is to add updated EFICheckDisabler kext that include Q370 chipset.  See here.  
      BIOS Version / Configuration: To be provided
      Version: 02.11.01 Rev.A Intel ME must be enabled for proper sleep / wake of UHD 630
       
      Clover Configuration
      Clover for UEFI booting only Install Clover in the ESP UEFI Drivers Recommended drivers AudioDxe DataHubDxe FSInject SMCHelper File System drivers ApfsDriverLoader VBoxHfs Memory fix drivers AptioMemoryFix Additional drivers NvmExpressDxe Install RC scripts on target volume Themes Choose your desired theme Install Clover Preference Pane (option not available when installing on USB thumb drive)  
      UHD 630 Framebuffer Patching: To be provided
       
      Current Versions
      Catalina 10.15.5.02 Clover (UEFI) r5119 Lilu.kext 1.4.5 WhateverGreen.kext 1.4.0 AppleALC.kext 1.5.0 IntelMausi 1.0.3 (Not IntelMausiEthernet)  
      Credits To be provided
       
       







      EliteDesk800 G4 Mini - Rev 0.82.zip
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
      -Donations with PicPay 
      @danielnmaldonado
      -Donation with Mercado Livre 
      https://tinyurl.com/y9evkj5u
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -Tutorial
      https://tinyurl.com/re2c9sz
       
      -Post Installation
      Paste EFI folder into EFI Partition in your SSD, reboot and extract one full dump with this app and post here!
      https://tinyurl.com/ybwr9kq3
      RunMe.app
      https://tinyurl.com/y9562hz7
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--
       









































       
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, headkaze, onemanosx, erroruser, Jenny David, Sampath007, Facebook Hackintosh community, Facebook Olarila community, SchmockLord, daliansky and many, many, many others!
       
      We're all here to have fun and learn from each other!
    • By dmpcoke
      Hi,
       
      I followed the OC guide, and installed Catalina 10.15.5 on my PC.
      The installation went very well. Most parts also work well after I login to the desktop except the following
      issue:
      Each time I tried to log back into the desktop from sleep, I would get a black screen very shortly after I entered the desktop.
      And black screen will last from a few seconds to a few minutes, no exact lasting time.
      Keyboards and mouse are still working during black screen, I can see the operations after the monitor works again.
       
      It connects LG monitor via DP port and I tried to modified the dp version between 1.2 and 1.4, got the same issue.
       
      Attached my entire OC folder, I'm so appreciated if someone could help me check it out, or tell me which part I should focus on.
       
      Thanks in advance!
       
      P.S. Here is my PC summary: Dell Optiplex 7060 MFF
       
      CPU Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz; 8th Gen, Coffee Lake GPU Intel(R) UHD Graphics 630 RAM Team Group 32 GB (2 × 16GB), 2400 MHz, DDR4 Chipset
      Intel 300 Series LPC (Q370) – A306 Audio Realtek ALC255/3234 (Codec ID: 0x10EC0255) Ethernet Intel(R) Ethernet Connection I219-LM WiFi/BT M.2 BCM43224 802.11a/b/g/n Storage Samsung SSD 970 EVO 500GB USB Ports Type-C × 1,USB 3.0 × 5 Video Output DP × 2 Monitor LG 4K 3840 x 2160 @ 60 Hz
      BIOS v1.4.2 OC.zip
×