Jump to content

1,362 posts in this topic

Recommended Posts

Well, it did for me :

 


polyzargone@MacBook-Optimus ~ % sudo cp -R /Volumes/ESP/EFI/CLOVER/kexts/Other/BrcmBluetoothInjector.kext /System/Library/Extensions
Password:
polyzargone@MacBook-Optimus ~ %

 

914625274_Capturedecran2019-06-18a19_43_44.thumb.png.a0bbbf54c3ed94842e958adf97e9061b.png

 

CsrActiveConfig is set as 0x3E7

 

Unsupported Mac are… Mac so maybe that explains why it fails…

Share this post


Link to post
Share on other sites
Advertisement
Posted (edited)
5 minutes ago, polyzargone said:

Well, it did for me :

 

 


polyzargone@MacBook-Optimus ~ % sudo cp -R /Volumes/ESP/EFI/CLOVER/kexts/Other/BrcmBluetoothInjector.kext /System/Library/Extensions
Password:
polyzargone@MacBook-Optimus ~ %

 

 

 

CsrActiveConfig is set as 0x3E7

 

Unsupported Mac are… Mac so maybe that explains why it fails…

I have Mac Book Pro and 4 Hackintosh and its not working on beta 2 here so you are lucky

Edited by chris1111

Share this post


Link to post
Share on other sites

It stands to reason that Catalina would get to the point that you can't modify the systems files directly.  There had to be a reason why Catalina divided its installation into a system partition and a data partition.

1712237541_CatalinaPartitions.thumb.png.b46a550cff63309e0279c446943fd0d9.png

 

Share this post


Link to post
Share on other sites

Very strange…

 

Because I just tried on another Hack and indeed, it fails :

 


polyzargone@Skylake1st ~ % sudo cp -R /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext /System/Library/Extensions
Password:
cp: /System/Library/Extensions/RealtekRTL8111.kext: Read-only file system
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext: Read-only file system
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Info.plist: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/MacOS: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents/MacOS: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents/MacOS: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/MacOS/RealtekRTL8111: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents/Resources: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources/en.lproj: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents/Resources/en.lproj: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources/en.lproj: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources/en.lproj/InfoPlist.strings: No such file or directory

 

 

I usually install the same software on my rigs so I don't know why it works on one and not another :worried_anim:.

Share this post


Link to post
Share on other sites
Posted (edited)
2 minutes ago, polyzargone said:

Very strange…

 

Because I just tried on another Hack and indeed, it fails :

 

 


polyzargone@Skylake1st ~ % sudo cp -R /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext /System/Library/Extensions
Password:
cp: /System/Library/Extensions/RealtekRTL8111.kext: Read-only file system
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext: Read-only file system
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Info.plist: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/MacOS: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents/MacOS: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents/MacOS: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/MacOS/RealtekRTL8111: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents/Resources: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources/en.lproj: No such file or directory
cp: /Volumes/ESP/EFI/CLOVER/kexts/Other/RealtekRTL8111.kext/Contents/Resources/en.lproj: unable to copy extended attributes to /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources/en.lproj: No such file or directory
cp: /System/Library/Extensions/RealtekRTL8111.kext/Contents/Resources/en.lproj/InfoPlist.strings: No such file or directory

 

 

I usually install the same software on my rigs so I don't know why it works on one and not another :worried_anim:.

How did you install Beta-2 on Working hack Update or reinstall ?

Edited by chris1111

Share this post


Link to post
Share on other sites
Just now, chris1111 said:

How did you install Beta-2 on Working hack Update or reinstall ?

 

Over Beta 1 as I did on both Hacks.

 

The only differences I see is that the one where it fails has a full APFS filesystem and the other one has a mix of NTFS, Ext4, HFS+ and APFS :

 

25028583_Capturedcran2019-06-1820_18_21.thumb.png.d97b6ab45b4fa5cd64cdf3345d57744e.png

1529770200_Capturedecran2019-06-18a20_18_16.thumb.png.3c963565bdf923124ed252b108aaec4e.png

Share this post


Link to post
Share on other sites
1 hour ago, fivos1996 said:

Hi. Just tried it and it still doesn't work. I keep getting the Local APIC panic without cpus=1. Please check my CLOVER folder and let me know if I'm missing something.

CLOVER.zip

Hi. Just tried it and it still doesn't work. I keep getting the Local APIC panic without cpus=1. Please check my CLOVER folder and let me know if I'm missing something.

Hi, its not your clover, this lapic fix is not working for me as well.

I think we need to wait for @PMheart to re look and fix it.

 

Thanks

 

Share this post


Link to post
Share on other sites
On 6/8/2019 at 1:06 PM, dvil said:

I'm having exactly the same problem, when I try to access Netflix or play an Amazon Prime video, Safari freezes the computer. My GPU is a 4GB 570+ Nitro, is your GPU a 4GB by any chance? I suspect is a video memory corruption problem, maybe driver related.

 

The card works perfectly in Mojave by the way.

This problem is still present in Catalina beta 2 :( hopefully it will be sorted in a future version. 

Share this post


Link to post
Share on other sites
2 hours ago, mnfesq said:

 There had to be a reason why Catalina divided its installation into a system partition and a data partition.

 

Improve security.

macOS has its own 'read-only' partition (unless you disable SIP), aka first APFS volume, while your data are located on second APFS volume. The idea behind is to prevent people from erasing macOS files (system files) by mistake, and to protect your macOS against possible attacks (speech for Mac users :P ).

In fact, only one disc will be visible in the Finder, but in a program like the Disk Utility, the both of them will be visible.

 

This new feature also is a problem for backup software, such as CCC - Its owner is claiming that actually CCC does not know how to handle this OS / data separation.

Share this post


Link to post
Share on other sites
11 hours ago, arsradu said:

Thanks! Could you, please, tell me what do you mean by this: "I downloaded it from Logitech website after installed developers..."?

I'm not sure I understand what you mean. Also, I suppose you got the Mojave version, right?

I downloaded the G510 installation files off https://www.logitech.com/en-us website, and installed on top of Catalina developers ("beta 1"). I upgraded to Catalina developers "beta 2" and it still works fine.

Share this post


Link to post
Share on other sites
5 hours ago, macq said:

Hi, its not your clover, this lapic fix is not working for me as well.

I think we need to wait for @PMheart to re look and fix it.

 

Thanks

 

The hex data in the kernel binary of beta 2 is different so we just need to find the correct value to find and replace...

Share this post


Link to post
Share on other sites
3 hours ago, fantomas1 said:

This new feature also is a problem for backup software, such as CCC - Its owner is claiming that actually CCC does not know how to handle this OS / data separation.

 

Technically, it should be that, when you restore your installation from back up, you install a fresh copy of the OS and then back up only the data partition.  At least in theory that's how it should be.

Share this post


Link to post
Share on other sites
On 6/4/2019 at 2:20 AM, mnfesq said:

I have Catalina up and running but cannot get video kexts loaded.  I'm hoping it's just a matter of waiting for Lilu and WEG to be updated for 10.15.  Also, my Broadcom Wifi card caused a KP when using AirportBrcmFixup.kext.  When I reverted to FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext, wifi worked fine.  If anyone has any tips for loading intel IGPU kexts, let me know.

Do you have a problem with waking up the display after sleep? I have Iris hd 540 and it goes black after wake up.

Share this post


Link to post
Share on other sites
2 hours ago, luky35 said:

When I want to install Clover Bootloader Catalina Beta 2 I get this notice (picture).

Please help?

 

http://shrani.si/f/1/Ba/2Jcvb3SL/clover.png

Run this command before using Clover package

Just by double click on command

And now you will have an option Install anyway

Gatekeeper-RW-SSD.zip

Share this post


Link to post
Share on other sites

I thing new Mac Pro supported LGA 3647 (28 core).

 

https://www.apple.com/ca/mac-pro/specs/

 

Share this post


Link to post
Share on other sites
12 hours ago, mnfesq said:

 

Technically, it should be that, when you restore your installation from back up, you install a fresh copy of the OS and then back up only the data partition.  At least in theory that's how it should be.

 

Hi @mnfesq @fantomas1

 

CCC works on new version for Catalina

 

CCC 5 (beta): Provisional support for macOS 10.15 Catalina

Are you beta-testing Apple's new macOS 10.15 Catalina? Help us test CCC 5 against macOS Catalina by joining our beta program. Open CCC 5 on Catalina, and CCC should automatically prompt to install our latest beta.

Please choose Ask a Question from CCC's Help menu to let us know if you encounter any problems or have questions about support for new features of that OS.

 

Share this post


Link to post
Share on other sites

@chris1111
Do you already have a download version of Old NVIDIA macOS Catalina-V2 ¿¿¿

Share this post


Link to post
Share on other sites
6 minutes ago, luky35 said:

@chris1111 hi,

 

Thank you very much,
Clover Bootloader was installed OK.

Now I have a problem with startup, which stops like an image and does not go on.

Please help if you can.
I attach my EFI.

 

http://shrani.si/f/3I/9G/3Czm2qAa/image.png

 

EFI.zip

PUT FAKESMC.KEXT IN OTHER :)

Share this post


Link to post
Share on other sites
46 minutes ago, luky35 said:

@chris1111 hi,

 

Thank you very much,
Clover Bootloader was installed OK.

Now I have a problem with startup, which stops like an image and does not go on.

Please help if you can.
I attach my EFI.

 

http://shrani.si/f/3I/9G/3Czm2qAa/image.png

 

EFI.zip

What is the PC you are trying to install Cata ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Slice
      I successfully installed macOS 10.11.6 and Windows 7 Pro SP1 in UEFI mode on the laptop.
      I know, there are detailed guides here and on osxlatitude.com but I was not agree with them and carefully check and test every step to tune my Mac.
       
      Hardware
      Intel® Core� i5-3320M CPU @ 2.60GHz, speedstep works with Clover default settings
      Chipset Intel 7 series, no patches needed
      Video: IntelHD4000 or NVS5200M switchable in BIOS, work in both cases
      LAN; Intel 82579LM, works with IntelMausiEthernet.kext v2.2.1
      Audio: IDT 92HD93BXX, works with VoodooHDA 2.9.0.
      SDHC reader O2Micro; works with native AppleSDHC.kext with Clover Arbitrary properties.
      USB3.0 works natively if not disabled in DSDT
      PS2 keyboard and touchpad works with VoodooPS2.
      WiFi: Dell Intel WiFi was replaced by Dell DW1520, Broadcom BCM943224HMS. DeviceID=4353
      LCD Screen 1366x768
      BIOS A12. Initially was A02. Then I flashed A23 and found it is quite bad. The screen is full of artefacts. Flash A12 and all is OK. Not tested other versions.
      For some reason BIOS can switched from Intel to Nvidia by itself so I have to do my solution working independent on this state.
       
      WiFi
      It is not working OOB although it has DeviceID known to Apple. The reason is WhiteList in the driver.
      I set MacModel as MacBookPro10,1 while the WiFi will work on MacBookAir. I make a patch in Clover.
      As well a patch for channels.
      I deleted a kext Brcm4331 because it has the same DeviceID. Let kext Brcm4360 to work alone.
       
      VideoCards
      In Bios we can set Optimus = Enable/Disable
      If Enable then we have two videocards Intel first and Nvidia second. In this case additional SSDT-3.aml will switch off Nvidia.
      If Disable then we have only Nvidia card. It will work if Board-ID taken from iMac13,2.
      But here there is contradiction with WiFi with required Board-ID from MacBookAir.
      So I take MacModel as MacBookPro10,1 which is most close by CPU IvyBridge.
      Set BoardID like iMac13,2 to make Nvidia working.
      Patch BoardID in Brcm4360 to make WiFi working.
      Now I have
      Inject->
      ->Intel=YES
      ->Nvidia=YES
      and SSDT-3.aml in ACPI\patched folder. This SSDT will switch off Nvidia if Intel card ON.
      For Intel graphics there is a patch against 8 apples at start.
      This Nvidia 5200 is Fermi and works in ElCapitan.
       
      Brightness
      No special kexts.
      The brightness controlled by keys F1,F2 and slider in Control Panel in both case Intel or Nvidia. Details here  #72 
       
      DSDT and SSDT
      This is very long story and finally I have working sleep in both cases Intel or Nvidia.
       
      Sensors
      I use my HWSensors3 with FakeSMC 3.5.2.
      I got monitoring:
      CPU temperature
      GPU temperature
      GPU main frequency
      GPU shader frequency
      Battery state % full, time to charged or time to empty.
      Battery voltage dinamically.
      Battery amperage dynamically. I can see it changes on heavy games.
      HDD temperature.

       
      Audio
      I like VoodooHDA and have no problems with it.
      The sound is clear, loud, and switchable between internal speaker and headphone.
      Mic is working.
       
      Bluetooth
      Just tested with BTFirmwareUpdate.kext and it works in 10.11.6. I not needed it so switched off by wireless switch at right side.
      For 10.13.6 there is other kext BRCMInjector.
       
      Keyboard, Touchpad and Touchstick
      Post #14
      I made my fork of the VoodooPS2 driver, take here sources and release version
      https://github.com/SergeySlice/VoodooPS2-for-ALPS
       
      My config, ACPI files and kexts are in attachment.
      05.12.2017
      EFI.7z
       
      EDITED:
      Better DSDT in the post #6.
      Sleep working even when AC inserted.
       
      EDITED 06.12.2018
      Now I have HighSierra and this is my EFI folder. Note, HighSierra is possible only with Intel graphics (Optimus is enabled in BIOS)
       

       
       
      Welcome to discussion!
      EFI-E6430.7z
      BRCMInjector.kext.zip
    • By Drovosek
      Unfortunately this is not my PC, I just decided to share the found config successful installation.
      https://vk.com/photo-12954845_457251886
       
      Hardware:
      OS X 10.15.0 Beta 2 
      CPU Intel XEON E5 2650 v3
      MB MSI X99A RAIDER
      AMD Radeon RX VEGA 56 video card
      Kingston HyperX Fury DDR4 2133Mhz 20gb memory
      Crucial 4gb 2400Mhz
      Sound E-MU 0202, Alc892 and AMD DisplayPort Audio
      Intel Gigabit LAN network
      WI-FI Broadcom BCM94360CS2
      BCM20702 BT (trackpad and keyboard work in the BIOS)
      BP Enermax Platimax 1000W
      AirDrop works.
      SSD NVMe Reina 480gb
      Samsung 850 Pro 120gb
      Dell U2713H monitor
      USB 15 ports are registered manually. 3.0 works. 
      Services usual, SpeedStep instituted through kekst. 
      Sleep is unstable.
       
      EFI: https://vk.com/doc207634019_512032268
       

      EFI.zip
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---DSDT patch requests is here---
       
      https://olarila.com/forum/viewtopic.php?f=19&t=1131
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  AptioMemory --> (consigliato) ->  Link download
       Può essere solo aggiunto manualmente scaricando dal link sopra e collocandolo nella rispettiva cartella
       NOTA: in questo caso non selezionare nessun OsxAptioFixDRV durante l'installazione di clover oppure rimuovetelo                        successivamente. 
                               : Driver64UEFI  ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
                               : Selezionate l'altri driver come da successiva immagine,
       
      *Nota: Altri driver che si possono usare  al suo posto  sono:
       informazioni 
       
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       Oppure direttamente da usb  
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      C_I_M.zip
       
       
       
       
       
       
       
       
       
       
       
       
       
×