Recently Browsing 1 member
OK, it's been a while since I posted something here. The new Catalina was out last month, the current version is 10.15.1. I decided to install on my HP Envy 13" Kaby Lake. This one should work for all Kaby Lake laptops out there and also with MOJAVE OS too. So read carefully and watch the videos.
1. You can't install Catalina on MBR unless you patch it, but it too complicated for me and I like to try the APFS system now instead of HFS. So, if you create the external USB drive using Boot Disk Utility, it won't install.
2. Replace original WIFI-Bluetooth COMBO with DW1560 or better.
3. Thanks to Lilu and people on Hackintosh world, things are much easier to install than before: Clover boot loader 5070, Lilu 1.3.9, Whatevergreen 1.3.4, AppleAlc 1.4.3, AirportBrcmFixup.kext, Bluetooth Patchram3 (I found BrcmPatchRAM3.kext + BrcmFirmwareData.kext + BrcmBluetoothInjector.kext), Hackintool is a must, VoodooPS2Controller.kext for trackpad, USBinjectAll , ACPIBatteryManager from rehabman, FakeSMC.kext.
4. Use a 1GB USB flash drive, use Boot Disk Utility to create an EFI folder, then copy it to the EFI folder of the External USB SSD hard drive.
I'll post more in details, but with these, you can boot Catalina without any problems.
Hi All - quick thing - I have a NUC 8i7BEH with 32GB RAM and 2 x 1TB SSD drives. Each drive has its own OS - Windows 10 and Catalina 10.15.
Clover works well - Catalina Boots, so does Windows.
Catalina - has sound over HDMI (to my monitor's speakers)
Windows - no audio device found - It does show Realtek and Intel Display Drivers - but the speaker has a red"x" and in Devices, there is no entry for Microphone Array under Audio Input/Output. It does, however, show Intel display over the HDMI - but actually no sound.
I have tried reinstalling Realtek drivers - now here's the thing...when it installs, it first uninstalls existing Realtek drivers - at this stage (and it's important) the sound starts working - as if uninstalling did the trick. As part of the installing, I have to reboot and upon reboot, it actually reinstalls the Realtek drivers. After that, I'm back to square 1. Unsure if it's the config.plist or boot args in clover. But something with Clover for sure.
I have tested this by removing the Mac Drive with clover and just booting directly to Windows 10 bootloader and everything works as it should, I have sound over HDMI and the audio device shows. Just not when I boot with Clover.
has anyone experienced this and have thoughts or pointers.
Thanks a ton!
*Update bios/uefi to F7+*
1- Go to M.I.T./Advanced Frequency Settings tab
Extreme Memory Profile (X.M.P.) - Profile 1
2- Go to BIOS tab
CSM Support - Disabled
3- Go to Peripherals/Thunderbolt(TM) Configuration tab
Security Level - No Security
Thunderbolt USB Support - Enabled
GPIO3 Force Pwr - Enabled
4- Go to Chipset tab
Internal Graphics - Enable
https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
*Use this folder with FULL DSDT PATCHED
*Use this folder with FULL DSDT PATCHED
---Extract one Full dump for DSDT edits, post files---
GIGABYTE Z390 DESIGNARE
Intel Core i9-9900K
CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
MSI RX Vega 64 AIR Boost 8G OC
Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular
TP-Link Archer T9E
Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
-FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---
-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
Thanks to KGP for SSDT Thunderbolt
Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
We're all here to have fun and learn from each other!