jonny33 Posted May 31, 2019 Share Posted May 31, 2019 Hi, A little bit of backstory: I have HP ProBook 440 G5, I installed Mojave with Rehabman's guide even though it's saying my device is experimental but reported as working. Everything works find except the headphone jack. Here on the forum I've found a kext +ssdt patch which resolved the problem with my headphone jack, but completely messes up with my power management. The battery completely dissapeared and whenever I unplug the laptop it restarts, also it restarts after around 5-10 min of work just randomly. Removing the kext and the patch fixes the issues. So I'm no expert but I assume there's something with the DSDT which needs fine tuning. Could you please take a look at my setup and help me if you can I'm attaching complete reporting files (DSDT/Clover etc.) because since I've used the hot patch guide some of the patches are most likely present in the config.plist file. P.S The ssdt patch which compliments the AppleALC present given to me is called SSDT-CX8200.aml you can find it in clover/acpi/patched debug_17941.zip Link to comment Share on other sites More sharing options...
Allan Posted May 31, 2019 Share Posted May 31, 2019 Run this app, and upload the file result here. RunMe Maybe @MaLd0n can take a look for ya! Link to comment Share on other sites More sharing options...
jonny33 Posted June 1, 2019 Author Share Posted June 1, 2019 You can find the outcome of the Runme attached Send me maxs-MacBook-Pro.zip Link to comment Share on other sites More sharing options...
jonny33 Posted June 3, 2019 Author Share Posted June 3, 2019 Bump @MaLd0n could you please take a look. (sorry for being anoying) Link to comment Share on other sites More sharing options...
MaLd0n Posted June 4, 2019 Share Posted June 4, 2019 22 hours ago, jonny33 said: Bump @MaLd0n could you please take a look. (sorry for being anoying) check if work good DSDT.aml.zip use it in config.plist change EC0 to EC 4543305f 45435f5f change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 brightnness, check ssdt+weg kext Link to comment Share on other sites More sharing options...
jonny33 Posted June 4, 2019 Author Share Posted June 4, 2019 3 hours ago, MaLd0n said: check if work good DSDT.aml.zip use it in config.plist change EC0 to EC 4543305f 45435f5f change GFX0 to IGPU 47465830 49475055 change HDAS to HDEF 48444153 48444546 change HECI to IMEI 48454349 494d4549 change SAT0 to SATA 53415430 53415441 brightnness, check ssdt+weg kext Should I remove anything from config.plist or just change the things you listed, also should I remove anything from acpi/patched and just put your file in there or keep the things I already have? also what do you mean by "brightnness, check ssdt+weg kext" I already have whatevergreen installed? Link to comment Share on other sites More sharing options...
jonny33 Posted June 5, 2019 Author Share Posted June 5, 2019 I tried the DSDT and the patches you listed (with the ones I already had it acpi/patched present as well) the audio is working alright but the computer again restarts randomly and I have a problem with the GPU now for display the system says that I have external display and the GPU has only 7 mb in about this Mac. and the brightness is not working. I'm attaching new files of the runme app as well as the error log that the system wants to send to apple after a faulty restart. error log.rtf Send me maxs-MacBook-Pro.zip Link to comment Share on other sites More sharing options...
jonny33 Posted June 7, 2019 Author Share Posted June 7, 2019 Bump :/ Link to comment Share on other sites More sharing options...
jonny33 Posted June 10, 2019 Author Share Posted June 10, 2019 Bump2 @MaLd0n Link to comment Share on other sites More sharing options...
Recommended Posts