Jump to content

3,246 posts in this topic

Recommended Posts

Hi @obus and @fabiosun

 

Could you please try if these two patches work? (which is supposed to perform the same thing as what FakeCPUID in Clover does)

 

#1

Base: _cpuid_set_info
Comment: FakeCPUID - Model 0xE (0x5E, SKL), 10.14
Count: 1
Enabled: YES
Find: 89C1C0E904880D
Identifier: kernel
Limit: 0
Mask: (LEAVE THIS EMPTY)
MatchKernel: 18.
Replace: B90E000000880D
ReplaceMask: (LEAVE THIS EMPTY)
Skip: 0
#2

Base: _cpuid_set_info
Comment: FakeCPUID - Ext 0x5 (0x5E, SKL), 10.14
Count: 1
Enabled: YES
Find: 89C1C1E91080
Identifier: kernel
Limit: 0
Mask: (LEAVE THIS EMPTY)
MatchKernel: 18.
Replace: B90500000080
ReplaceMask: (LEAVE THIS EMPTY)
Skip: 0

 

Or this full Patch entry:

	<key>Kernel</key>
	<dict>
		<key>Patch</key>
		<array>
			<dict>
				<key>Base</key>
				<string>_cpuid_set_info</string>
				<key>Comment</key>
				<string>FakeCPUID - Model 0xE (0x5E, SKL), 10.14</string>
				<key>Count</key>
				<integer>1</integer>
				<key>Enabled</key>
				<true/>
				<key>Find</key>
				<data>
				icHA6QSIDQ==
				</data>
				<key>Identifier</key>
				<string>kernel</string>
				<key>Limit</key>
				<integer>0</integer>
				<key>Mask</key>
				<data>
				</data>
				<key>MatchKernel</key>
				<string>18.</string>
				<key>Replace</key>
				<data>
				uQ4AAACIDQ==
				</data>
				<key>ReplaceMask</key>
				<data>
				</data>
				<key>Skip</key>
				<integer>0</integer>
			</dict>
			<dict>
				<key>Base</key>
				<string>_cpuid_set_info</string>
				<key>Comment</key>
				<string>FakeCPUID - Ext 0x5 (0x5E, SKL), 10.14</string>
				<key>Count</key>
				<integer>1</integer>
				<key>Enabled</key>
				<true/>
				<key>Find</key>
				<data>
				icHB6RCA
				</data>
				<key>Identifier</key>
				<string>kernel</string>
				<key>Limit</key>
				<integer>0</integer>
				<key>Mask</key>
				<data>
				</data>
				<key>MatchKernel</key>
				<string>18.</string>
				<key>Replace</key>
				<data>
				uQUAAACA
				</data>
				<key>ReplaceMask</key>
				<data>
				</data>
				<key>Skip</key>
				<integer>0</integer>
			</dict>
		</array>
	</dict>

 

Note: Assuming that both of you are using and testing under 10.14, those 2 patches above were made based off 10.14.4 (18E226), for earlier versions, please send me the kernel and I will take a look.

Edited by PMheart
better explanation

Share this post


Link to post
Share on other sites
Advertisement
2 hours ago, PMheart said:

Hi @obus and @fabiosun

 

Could you please try if these two patches work? (which is supposed to perform the same thing as what FakeCPUID in Clover does)

 


#1

Base: _cpuid_set_info
Comment: FakeCPUID - Model 0xE (0x5E, SKL), 10.14
Count: 1
Enabled: YES
Find: 89C1C0E904880D
Identifier: kernel
Limit: 0
Mask: (LEAVE THIS EMPTY)
MatchKernel: 18.
Replace: B90E000000880D
ReplaceMask: (LEAVE THIS EMPTY)
Skip: 0

#2

Base: _cpuid_set_info
Comment: FakeCPUID - Ext 0x5 (0x5E, SKL), 10.14
Count: 1
Enabled: YES
Find: 89C1C1E91080
Identifier: kernel
Limit: 0
Mask: (LEAVE THIS EMPTY)
MatchKernel: 18.
Replace: B90500000080
ReplaceMask: (LEAVE THIS EMPTY)
Skip: 0

 

Or this full Patch entry:


	<key>Kernel</key>
	<dict>
		<key>Patch</key>
		<array>
			<dict>
				<key>Base</key>
				<string>_cpuid_set_info</string>
				<key>Comment</key>
				<string>FakeCPUID - Model 0xE (0x5E, SKL), 10.14</string>
				<key>Count</key>
				<integer>1</integer>
				<key>Enabled</key>
				<true/>
				<key>Find</key>
				<data>
				icHA6QSIDQ==
				</data>
				<key>Identifier</key>
				<string>kernel</string>
				<key>Limit</key>
				<integer>0</integer>
				<key>Mask</key>
				<data>
				</data>
				<key>MatchKernel</key>
				<string>18.</string>
				<key>Replace</key>
				<data>
				uQ4AAACIDQ==
				</data>
				<key>ReplaceMask</key>
				<data>
				</data>
				<key>Skip</key>
				<integer>0</integer>
			</dict>
			<dict>
				<key>Base</key>
				<string>_cpuid_set_info</string>
				<key>Comment</key>
				<string>FakeCPUID - Ext 0x5 (0x5E, SKL), 10.14</string>
				<key>Count</key>
				<integer>1</integer>
				<key>Enabled</key>
				<true/>
				<key>Find</key>
				<data>
				icHB6RCA
				</data>
				<key>Identifier</key>
				<string>kernel</string>
				<key>Limit</key>
				<integer>0</integer>
				<key>Mask</key>
				<data>
				</data>
				<key>MatchKernel</key>
				<string>18.</string>
				<key>Replace</key>
				<data>
				uQUAAACA
				</data>
				<key>ReplaceMask</key>
				<data>
				</data>
				<key>Skip</key>
				<integer>0</integer>
			</dict>
		</array>
	</dict>

 

Note: Assuming that both of you are using and testing under 10.14, those 2 patches above were made based off 10.14.4 (18E226), for earlier versions, please send me the kernel and I will take a look.

It works like a treat even for version macOS 10.14.4 (18E2034).

Thank's again PMhart for your efforts.

Edited by obus

Share this post


Link to post
Share on other sites

X86PlatformPlugin and X86PlatformShim is not loading with OC on my rig.

Anybody else having the same problem?

How to enable plugin type and drop Oem SSDTs?

 

Any ideas?

Screenshot 2019-04-29 at 18.35.39.png

Edited by obus

Share this post


Link to post
Share on other sites
3 hours ago, obus said:

X86PlatformPlugin and X86PlatformShim is not loading with OC on my rig.

Anybody else having the same problem?

How to enable plugin type and drop Oem SSDTs?

 

Any ideas?

Screenshot 2019-04-29 at 18.35.39.png

 

Take a look at sample ssdt in /doc/AcpiSamples directory, compil SSDT-PLUG.dsl and add it to injection and drop what you want. 

 

You can try first without dropping all SSDT this example is just to show you howto use those options.

 

337107271_Capturedcran2019-04-2918_56_23.png.57a81ec62773c9d1b8147d220bf8a2b7.png

Fred 

Edited by FredWst

Share this post


Link to post
Share on other sites

This is a great change in the boot loader , i am using clover and it is working flawlessly but i would like to try this new boot loader , i did as on the installation process but my system stop after the acpi injection , can anyone help me so i can send my patched dsdt and ssdt and config plist file , waiting any reply , again , thank you for this new boot loader. 

Share this post


Link to post
Share on other sites

Has anyone had an issue with booting from NVMe as some are reporting issues on the Z390, im on Asus Prime Z370 PII with Sata Disabled and just use a 970 Evo on bottom M2 Slot with PCIEx4 booted with Opencore with Native speeds :thumbsup_anim:

Screenshot 2019-04-29 at 23.36.35.png

Share this post


Link to post
Share on other sites
18 minutes ago, MacFriedIntel said:

Has anyone had an issue with booting from NVMe as some are reporting issues on the Z390, im on Asus Prime Z370 PII with Sata Disabled and just use a 970 Evo on bottom M2 Slot with PCIEx4 booted with Opencore with Native speeds :thumbsup_anim:

 

 

thanks on the heads up will check it out an try on mine as have a asus z370-p

Edited by errorexists

Share this post


Link to post
Share on other sites
7 hours ago, WarDoc said:

if someone wants to make a logog for this bootloader pass it to me please also this is bringing attention slowly to the project 

 

Amazing video! Thank you for your contribution ;)

Share this post


Link to post
Share on other sites

This logo should be something along the lines of a Apple with half of it missing showings the apple core.

Share this post


Link to post
Share on other sites
On 4/28/2019 at 6:31 PM, errorexists said:

any one using a samsung 970 pro nvme m.2 with OpenCore as it doesnt seem to show in the boot selector only the ssd's will show

still having issue with boot selection on asus z390-a an the z370-p
im using mojave 10.14.4 used olarila install with clover boot loader with out issues an maldon provided the openCore release an i have gone through my bios settings to make sure all is good as i am unable to do a debug as i can not see the mojave in the selector as the mojave beta is on a ssd card the ones i am trying to load are on 970 nvme evo m.2 & (pro) but yet windows does show as its on a samsung nvme m.2 evo

as i opened a bug report @vit9696  closed an says to ask here as there is no way i can do a debug for the issue ahh im lost here lol
Untitled3245.jpg.459579e5a4d9e7c44655df121720e934.jpg

Share this post


Link to post
Share on other sites
3 hours ago, errorexists said:

still having issue with boot selection on asus z390-a an the z370-p
im using mojave 10.14.4 used olarila install with clover boot loader with out issues an maldon provided the openCore release an i have gone through my bios settings to make sure all is good as i am unable to do a debug as i can not see the mojave in the selector as the mojave beta is on a ssd card the ones i am trying to load are on 970 nvme evo m.2 & (pro) but yet windows does show as its on a samsung nvme m.2 evo

as i opened a bug report @vit9696  closed an says to ask here as there is no way i can do a debug for the issue ahh im lost here lol
Untitled3245.jpg.459579e5a4d9e7c44655df121720e934.jpg

 

 

I'm having the same issue. I have an NVME Samsung 960 Pro that I boot fine with Clover, but it does not even appear with OC. Using GB Z390 Aorus Ultra.

Share this post


Link to post
Share on other sites
40 minutes ago, Download-Fritz said:

"sudo nvram -c" in macOS, but this has nothing to do with OC

Only work with hardware NVRAM.

Edited by obus

Share this post


Link to post
Share on other sites

Even with the Pendrive formatted in right way, I can't boot from it.

 

I've put the OC and BOOT folders with the correct content inside each other, but it don't show up. <_<

Share this post


Link to post
Share on other sites
3 hours ago, Allan said:

Even with the Pendrive formatted in right way, I can't boot from it.

 

I've put the OC and BOOT folders with the correct content inside each other, but it don't show up. <_<

jump in discord we will help you out 

Share this post


Link to post
Share on other sites

hello

 

 insyde bios have problems with OC

 

I only see apple logo then the UEFI boot stop from the usb

 

just waiting new releases from OC

 

good hack

Share this post


Link to post
Share on other sites
2 hours ago, artur_pt said:

hello

 

 insyde bios have problems with OC

 

I only see apple logo then the UEFI boot stop from the usb

 

just waiting new releases from OC

 

good hack

My insyde #2 works.

IgnoreInvalidFlexRatio Yes

ReleaseUsbOwnership Yes

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By DanZiRuleZ
      Dear All, 
       
      trying to install Catalina on my ASUS Z87 Plus, I followed the Haswell guide to the letter, all set up now, USB stick boots ok, Catalina installs on SSD, but then when trying to boot it I am receiving Kernel Panic and no idea how to move forward. 
       
      Have the debug options, but opencore will only dump boot messages where I don't see much sticking out.
       
      My last resort would be just installing clover on the already installed SSD's EFI partition, it at all possible. High Sierra is working fine and I did get Clover with Mojave once but stuck with High Sierra with my GTX960 video card...
       
      Attached is the kernel panic and my EFI setup if anyone can help me troubleshoot.
      Many thanks
      D.
       

      EFI.zip
    • By n.d.k
      After several weeks of testing OC bootloader,  disecting its source code and also Clover's source code as well, I finally switch from Clover to OC as my main bootloader. Wait! don't get the wrong idea that OpenCore is better than Clover. They both work equally well, producing a bootable macOS as an end result with simliar boot time. OC design direction is different with Clover, I believe it's not intended as a Clover replacement, but more narrowing down to macOS specifically. However, macOS is not the only OS that i am using, so, i decided to add some minimal necessary source code modification to the OC to get some of the features I need. I like to share my customized OC forked https://github.com/n-d-k/OpenCorePkg , you have to compile it yourself if you want, i will not provide pre build binary.    
       
      Additional features/changes:
      ============
       
      [ Multi-Boot ]
        - ACPI patches are optional for non macOS with setting ACPI->Quirks->EnableForAll to yes (default is no).
        - Booter Quirtks, SMBIOS and Device Properties patches will only applied to macOS.
          
      [ Hotkeys ]
        - Full functional Hotkeys [1-9] corresponding to Boot Entry's Index number and dedicated W (Windows) / X (macOS) keys can be used without seeing Boot Picker.
        - While in boot picker, F10 can use to take a snapshot of the screen.
                
      [ Ui Boot Picker ]
        - Bios Date/time, auto boot to the same OS or manual set to always boot one OS mode, and OC version are displayed in boot picker.
        - Auto boot to previous booted OS (if Misc->Security->AllowSetDefault is NO/false).
        - macOS Recovery/Tools Entries are hidden by default, use Spacebar in Boot Menu as a toggle on/off to show/hide hidden entries.
                
      [ Custom Entries ]
         - Custom entries are now listed first in picker menu and by the orders they are appeared in Misc->Boot->Entries, before all other entries.
         - Ability to change entry name found by auto scanner by adding custom entry with the exact same device path,
           this will give users the option to complete change how all boot entries listed in Boot Picker.
          
      [ Others ]
         - No verbose apfs.efi driver loading (if using apfs.efi instead of ApfsDriverLoader.efi).
          - ndk-macbuild.tool script are set to compile with latest edk2 (One can easily set to stable edk2 if prefer).
          - NvmExpressDxe driver build script are also available for system without native nvme support. (Compatible with OC and Clover).
       
      Usage:
       - To build OpenCore, run "./ndk-macbuild.tool" at Terminal (require Xcode and Xcode Command Line Tool installed, and open xcode to accept license agreement before compiling).
       - To build NvmExpressDxe driver, run "./buildnvme.sh".
       
      4k screen resolutions

       
       

       
      Customized by @btwise

       
       
       
    • By SniperBuddy
      Hello guys,
      I'm relatively new to the world of hackintosh.
      I'm trying to install the latest Mac OS - Catalina with the help of Opencore, however, this is the error that's displayed while booting from the USB:
       
      https://drive.google.com/open?id=1Xd4V2wZ2fEsgRyfVcXlJHXMPGa85g2s3
       
      You can take a look at my config.plist file from here - https://drive.google.com/file/d/17FZpTcVp4RFSaxdm6yW4uELkt7MaLdmt/view?usp=sharing
       
      I'm using the Acer E575 G laptop with Kabylake (i5 7200u)
       
      Any help would be gladly appreciated!
       
       
       
       
    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
    • By BlitzPanzer
      Catalina 10.15.3, OC 0.5.5

      Follow the OpenCore AMD Vanilla Guide, everything works fine iMessage, Siri, FaceTime, Continuity, Airdrop, Audio, WiFi
      But here is the problem
      Once I restart or shutdown and reboot, I will have kernel panic, so i have to reboot once again, then no more kernel panic, straight back to the system.
      Down below are the 3 kernel panic reports I got after I am back to the system, also provided specs, kexts, drivers and config.plist I used.
      Please someone help me with the problem
      Thanks in advanced   

      System Specs
      CPU: Ryzen R5 3600
      MOBO: MSI B450 Mortar Max
      RAM: Kingston HyperX Fury 16GB*2 3200MHz DDR4
      SSD: Kingston A2000 500GB NVMe PCIe
      GPU: Gigabyte RX 570 Gaming 4G v2.0
      PCIe: BCM943602CS Kexts:
      AppleALC
      AppleMCEReporterDisabler
      BrcmBluetoothInjector
      BrcmPatchRAM3
      HDMIAudio
      Lilu
      MacProMemoryNotificationDisabler
      NightShiftUnlocker
      NVMeFix
      RealtekRTL8111
      VirtualSMC
      WhateverGreen Drivers:
      ApfsDriverLoader
      AppleUsbKbDxe
      FwRuntimeServices
      VBoxHfs config.plist:
      https://drive.google.com/file/d/1M22Tvn7W-Zf_b_-J52oLcfjECj5qAcp6/view

      Kernel Panic Report 1
      panic(cpu 0 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9f212fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffffa3ce87c000, CR3: 0x00000000263ba000, CR4: 0x00000000003406e0 RAX: 0xffffffa3ce87c000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffffa3ce75bb60, RBP: 0xffffffa3ce75bb80, RSI: 0xffffff806d3141c0, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805cc7c900, R13: 0xffffff835806f000, R14: 0x0000000000000000, R15: 0xffffff8068d2da50 RFL: 0x0000000000010246, RIP: 0xffffff7f9f212fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffffa3ce87c000, Error code: 0x0000000000000002, Fault CPU: 0x0, PL: 0, VF: 1 Backtrace (CPU 0), Frame : Return Address 0xffffffa3ce75b5c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffffa3ce75b610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffffa3ce75b650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffffa3ce75b6a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75b6c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffffa3ce75b7c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffffa3ce75b810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffffa3ce75b880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffffa3ce75ba00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffffa3ce75ba50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75ba70 : 0xffffff7f9f212fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffffa3ce75bb80 : 0xffffff7f9f24a795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffffa3ce75bba0 : 0xffffff7f9f212ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffffa3ce75bbe0 : 0xffffff7f9f2325c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffffa3ce75bc30 : 0xffffff7f9f1b8adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffffa3ce75bc70 : 0xffffff7f9f1b64be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffffa3ce75bd00 : 0xffffff7f9f128534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffffa3ce75bd80 : 0xffffff7f9f1b488e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffffa3ce75bde0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffffa3ce75be40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffffa3ce75bef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffffa3ce75bf50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffffa3ce75bfa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000->0xffffff7f9f1b2fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c185000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c228000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9f1b3000->0xffffff7f9f6f7fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 47565362999  
      Kernel Panic Report 2
      panic(cpu 10 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9e629fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d25d2000, CR3: 0x0000000029068000, CR4: 0x00000000003406e0 RAX: 0xffffff83d25d2000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d14c3b60, RBP: 0xffffff83d14c3b80, RSI: 0xffffff805f6adb80, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805fba2580, R13: 0xffffff835b02e000, R14: 0x0000000000000000, R15: 0xffffff80631191e0 RFL: 0x0000000000010246, RIP: 0xffffff7f9e629fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffff83d25d2000, Error code: 0x0000000000000002, Fault CPU: 0xa, PL: 0, VF: 1 Backtrace (CPU 10), Frame : Return Address 0xffffff83d14c35c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d14c3610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d14c3650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d14c36a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c36c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d14c37c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d14c3810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffff83d14c3880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d14c3a00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d14c3a50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c3a70 : 0xffffff7f9e629fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d14c3b80 : 0xffffff7f9e661795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d14c3ba0 : 0xffffff7f9e629ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d14c3be0 : 0xffffff7f9e6495c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d14c3c30 : 0xffffff7f9e5cfadb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d14c3c70 : 0xffffff7f9e5cd4be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d14c3d00 : 0xffffff7f9e52a534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d14c3d80 : 0xffffff7f9e5cb88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d14c3de0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d14c3e40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d14c3ef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d14c3f50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d14c3fa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000->0xffffff7f9e5b5fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c3f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c09f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9e5ca000->0xffffff7f9eb0efff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 38416992755  
      Kernel Panic Report 3
      panic(cpu 8 caller 0xffffff801da652fa): Kernel trap at 0xffffff7fa084dfe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d44cd000, CR3: 0x000000002b260000, CR4: 0x00000000003406e0 RAX: 0xffffff83d44cd000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d319bb60, RBP: 0xffffff83d319bb80, RSI: 0xffffff8066659c00, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff8061f35280, R13: 0xffffff835d231000, R14: 0x0000000000000000, R15: 0xffffff806189db90 RFL: 0x0000000000010246, RIP: 0xffffff7fa084dfe3, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff83d44cd000, Error code: 0x0000000000000002, Fault CPU: 0x8, PL: 0, VF: 1 Backtrace (CPU 8), Frame : Return Address 0xffffff83d319b5c0 : 0xffffff801d93bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d319b610 : 0xffffff801da734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d319b650 : 0xffffff801da64f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d319b6a0 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319b6c0 : 0xffffff801d93b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d319b7c0 : 0xffffff801d93b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d319b810 : 0xffffff801e0d2aa9 mach_kernel : _panic + 0x61 0xffffff83d319b880 : 0xffffff801da652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d319ba00 : 0xffffff801da64ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d319ba50 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319ba70 : 0xffffff7fa084dfe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d319bb80 : 0xffffff7fa0885795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d319bba0 : 0xffffff7fa084def0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d319bbe0 : 0xffffff7fa086d5c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d319bc30 : 0xffffff7fa07f3adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d319bc70 : 0xffffff7fa07f14be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d319bd00 : 0xffffff7fa074e534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d319bd80 : 0xffffff7fa07ef88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d319bde0 : 0xffffff801e01b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d319be40 : 0xffffff801e01adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d319bef0 : 0xffffff801e01a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d319bf50 : 0xffffff801e01c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d319bfa0 : 0xffffff801d8e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000->0xffffff7fa07d9fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9e5f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9e29f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7fa07ee000->0xffffff7fa0d32fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001d600000 Kernel text base: 0xffffff801d800000 __HIB text base: 0xffffff801d700000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 27776834167  
      config.plist
×