Jump to content

2,466 posts in this topic

Recommended Posts

Finally had the supplemental update installed.
 
I have a dual display setup, one 4K monitor and one 2K monitor with portrait orientation. The installer boots right in if I unplugged the 2K monitor!
 
Could this be a bug?



It should be not, did you disable CSM in bios???


Sent from my iPhone using Tapatalk
Finally had the supplemental update installed.
 
I have a dual display setup, one 4K monitor and one 2K monitor with portrait orientation. The installer boots right in if I unplugged the 2K monitor!
 
Could this be a bug?



It should be not, did you disable CSM in bios???


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
Advertisement
 
 
 
 
5 minutes ago, Andres ZeroCross said:

 

 


It should be not, did you disable CSM in bios???


Sent from my iPhone using Tapatalk


It should be not, did you disable CSM in bios???


Sent from my iPhone using Tapatalk

 

 

 

CSM is disabled in BIOS

Share this post


Link to post
Share on other sites
11 hours ago, Andres ZeroCross said:


just put the binary find and replace to config.plis of OpenCore's config.plist. Picture below show about Patch of AMD9500Controller.kext (kext to patch in clover's config.plist).

And about KernelToPatch, what's kind of kernel do you want to patch??. Kernel -> Quirks contains about some kernel patch mostly
image.thumb.png.3de4aa819d35a534e679305f7933f082.png

 

I made a mistake: only KextToPatch (ACPI) for my old IvyBridge config.

 

For new one (Z390 Aorus Master), I search a patch AppleAHCIPort for Hot-Plug (Catalina compatible)

Share this post


Link to post
Share on other sites
Posted (edited)

With previous OC version, i got no problem with Wake from more than around 1 hours sleep of my PC. Always get this kernel panic with latest commit.

I am pretty sure 100% no problem with it before,, should "DiscardHibernateMap=No" affect on this,, i have set YES for now. But need 1 hours sleep of PC to get the result

Screen Shot 2019-08-08 at 12.29.08.png

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

5 cycles sleep and wake are no problem (tried it with sleep under 5 minutes and wake again with DiscardHibernateMap=YES).

But i can't sleep my pc more than 5 minutes. I am working with my pc right now. Will report for result soon after take my pc in sleep mode in 1 hour or more

 

image.png.7565e874a33ecd6c7359a3f6ccad4177.png

Share this post


Link to post
Share on other sites
 
I made a mistake: only KextToPatch (ACPI) for my old IvyBridge config.
 
For new one (Z390 Aorus Master), I search a patch AppleAHCIPort for Hot-Plug (Catalina compatible)



Can you explain to me the advantage of using Hot-plug sata?? I never use this patch for my Z170 or Z390.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

good day.

 

i start to use OC today but have one issue.

 

bcz i have 2 nvme and 1 ssd, one have win10, one have catalina and one have mojave.

 

anyone know how to set OC to boot to a specify Drive i/o the first default one?

thanks.

Share this post


Link to post
Share on other sites
1 minute ago, iTTT said:

good day.

 

i start to use OC today but have one issue.

 

bcz i have 2 nvme and 1 ssd, one have win10, one have catalina and one have mojave.

 

anyone know how to set OC to boot to a specify Drive i/o the first default one?

thanks.


System Preferences -> Startup Up Disk -> Select Disk then reboot. Selected disk will be default ones. It's like real mac habit

Share this post


Link to post
Share on other sites
15 minutes ago, Andres ZeroCross said:


System Preferences -> Startup Up Disk -> Select Disk then reboot. Selected disk will be default ones. It's like real mac habit

 

wow. just that simple?

 

thanks much, i will test it later.

Share this post


Link to post
Share on other sites
1 hour ago, Andres ZeroCross said:

 

 


Can you explain to me the advantage of using Hot-plug sata?? I never use this patch for my Z170 or Z390.


Sent from my iPhone using Tapatalk

 

 

 

With Hot-Plug patch in Clover, you can plug and unplug SATA disk without reboot system. Like external drive.

 

I use it for 7 Series on Mojave. Don't test on 11 Series on Catalina.

 

	<dict>
				<key>Comment</key>
				<string>patch AppleAHCIPort for ICH * by vit9696</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QGACAA==
				</data>
				<key>InfoPlistPatch</key>
				<false/>
				<key>Name</key>
				<string>com.apple.driver.AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				AAAAAA==
				</data>
			</dict>

 

Share this post


Link to post
Share on other sites
16 minutes ago, Matgen84 said:

 

With Hot-Plug patch in Clover, you can plug and unplug SATA disk without reboot system. Like external drive.

 

I use it for 7 Series on Mojave. Don't test on 11 Series on Catalina.

 


	<dict>
				<key>Comment</key>
				<string>patch AppleAHCIPort for ICH * by vit9696</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QGACAA==
				</data>
				<key>InfoPlistPatch</key>
				<false/>
				<key>Name</key>
				<string>com.apple.driver.AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				AAAAAA==
				</data>
			</dict>

 

 

 

Binary can still be founded,, it's should work in Catalina
image.thumb.png.3cf49e489a9fefc48d3bd6c9eee24d77.png

Share this post


Link to post
Share on other sites
8 minutes ago, Andres ZeroCross said:

 

 

Binary can still be founded,, it's should work in Catalina
image.thumb.png.3cf49e489a9fefc48d3bd6c9eee24d77.png

 

Thanks

 

What is your tool for binary?

 

Ok for Clover/Catalina. What about OC? So sorry for my poor English, I don't understand well to put KextToPatch in OC Config.plist.

Share this post


Link to post
Share on other sites
Posted (edited)
36 minutes ago, Matgen84 said:

 

With Hot-Plug patch in Clover, you can plug and unplug SATA disk without reboot system. Like external drive.

 

I use it for 7 Series on Mojave. Don't test on 11 Series on Catalina.

 


	<dict>
				<key>Comment</key>
				<string>patch AppleAHCIPort for ICH * by vit9696</string>
				<key>Disabled</key>
				<false/>
				<key>Find</key>
				<data>
				QGACAA==
				</data>
				<key>InfoPlistPatch</key>
				<false/>
				<key>Name</key>
				<string>com.apple.driver.AppleAHCIPort</string>
				<key>Replace</key>
				<data>
				AAAAAA==
				</data>
			</dict>

 


With this patch, all connected Storage to 3rd party controller (ASMEDIA) with "Physical Interconnect: PCI" become Orange (ejectable).

I don't like this,, but the patch is still working. I will undone it
image.thumb.png.f2728ece914efda0a5e2511ac35bde15.png
 

 

Take a look, Hot-Plug is working,, IOREG Shows it
image.thumb.png.685d798afd0517400f97434c55002753.png

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites
Posted (edited)

Btw @Matgen84 i have checked your IOREG Output. Your board doesn't have any Other PCI Controller Sata except Intel. Hot-plug patch won't work for you. Because you only have Intel Sata Controller.

Different with mine, i have Intel Sata Controller, Asmedia ASM1062 Controller (3rd party controller onboard), and PCIe to Sata 3 (ASM1060). 

image.thumb.png.c9d6ac36af0e3796d2b51634da211622.png

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites
Posted (edited)

@Matgen84

Ok, i have mistake. patch work for all sata controller, not just PCIe Controller (3rd party controller).

Just need to Enable Hot Plug to certain Sata Port in BIOS, and use this patch. All my Internal storage (PCie + Intel Controller) except NVME become External / Ejectable / Hot-Plug.

IMG_3718.png

 

 

Screen Shot 2019-08-08 at 15.56.07.png

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

Just for your information :
Enable Hot Plug Port Sata in BIOS but without using this patch will break your sleep. (I have tested it). So if you disable SATA Hot Plug patch, you need to disable hot plug port in BIOS too.

Share this post


Link to post
Share on other sites
Posted (edited)

Hi all!

Will test to set EnableWriteUnprotector = Yes but this quirk requires OC_FIRMWARE_RUNTIME protocol implemented in FwRuntimeServices.efi.

I don't understand how to implement that protocol. Is it something I should configure in config.plist or something I need to configure in some other way?

 

With the latest release I'm unable to boot with FwRuntimeServices.efi. 

I'm stuck here and I don't really know how to debug.

 

1866342970_Screenshot2019-08-08at11_56_36.thumb.png.6a38c1915473407dbb3538d1b9e7028c.png

 

Any help appreciated

config.plist

Edited by obus

Share this post


Link to post
Share on other sites
Hi all!

Will test to set EnableWriteUnprotector = Yes but this quirk requires OC_FIRMWARE_RUNTIME protocol implemented in FwRuntimeServices.efi.

I don't understand how to implement that protocol. Is it something I should configure in config.plist or something I need to configure in some other way?

 

With the latest release I'm unable to boot with FwRuntimeServices.efi. 

I'm stuck here and I don't really know how to debug.

 

1866342970_Screenshot2019-08-08at11_56_36.thumb.png.6a38c1915473407dbb3538d1b9e7028c.png

 

Any help appreciated

config.plist

 

 

RequestBootVarRouting=YES

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
1 hour ago, Andres ZeroCross said:

@Matgen84

Ok, i have mistake. patch work for all sata controller, not just PCIe Controller (3rd party controller).

Just need to Enable Hot Plug to certain Sata Port in BIOS, and use this patch. All my Internal storage (PCie + Intel Controller) except NVME become External / Ejectable / Hot-Plug.

IMG_3718.png

 

 

Screen Shot 2019-08-08 at 15.56.07.png

 

There is a issue with the Hot-Plug patch for your Mobo or OS. On my 7 Series board,  SATA drives shows as internal drives, not external. This patch must be update, just my opinion.

Hi,

 

I don't understand this issue with NVRAM. Please help.

 

 

Capture d’écran 2019-08-08 à 12.13.29.png

Share this post


Link to post
Share on other sites
 

There is a issue with the Hot-Plug patch for your Mobo or OS. On my 7 Series board,  SATA drives shows as internal drives, not external. This patch must be update, just my opinion.

Hi,

 

I don't understand this issue with NVRAM. Please help.

 

 

1695145719_Capturedcran2019-08-0812_13_29.png.f2f5d7fcde571e6a2031864e1294c717.png

 

 

Ofcourse sata drives = internal. What do you mean??

 

Nvram issue? Try this "AvoidRuntimeDefrag= YES"

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
11 minutes ago, Andres ZeroCross said:

 

 

RequestBootVarRouting=YES

 

 

Sent from my iPhone using Tapatalk

Already set to YES in config.plist

 

Thank's anyway.

Share this post


Link to post
Share on other sites
Already set to YES in config.plist
 
Thank's anyway.



Your booter combinations should be same like@justin


Sent from my iPhone using Tapatalk
Already set to YES in config.plist
 
Thank's anyway.



Your booter combinations should be same like@justin


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
20 minutes ago, Andres ZeroCross said:

 

 


Ofcourse sata drives = internal. What do you mean??

Nvram issue? Try this "AvoidRuntimeDefrag= YES"


Sent from my iPhone using Tapatalk


Ofcourse sata drives = internal. What do you mean??

Nvram issue? Try this "AvoidRuntimeDefrag= YES"


Sent from my iPhone using Tapatalk

 

 

 

Thanks. I try "AvoidRuntimeDefrag= YES" after update config.plist 0.0.3--->0.0.4

 

Right, SATA drives=internal. But on your desktop screenshot, the drives are yellow icons as external drives. On my old system, there are grey icons as internal disks. 

Share this post


Link to post
Share on other sites
37 minutes ago, Andres ZeroCross said:

Your booter combinations should be same like@justin
Sent from my iPhone using Tapatalk

 

 

That doesn't work. DisableVariableWrite = YES only on Z390, B360, H310 whit nonworking NVRAM.

My board has native NVRAM.

Share this post


Link to post
Share on other sites
Posted (edited)
41 minutes ago, Matgen84 said:

 

Thanks. I try "AvoidRuntimeDefrag= YES" after update config.plist 0.0.3--->0.0.4

 

Right, SATA drives=internal. But on your desktop screenshot, the drives are yellow icons as external drives. On my old system, there are grey icons as internal disks. 


It's detect as external disk (orange icon) because hot-plug or patch is running. 

18 minutes ago, obus said:

That doesn't work. DisableVariableWrite = YES only on Z390, B360, H310 whit nonworking NVRAM.

My board has native NVRAM.


Don't mix new booter feature with old files. Update your opencore and applesupport files to latest version. And reupload your config.plist
image.png.ee8efead7c7c908a26fb6b1c075acc80.pngimage.png.6a0805726637e3caddecb7b065f0406c.png

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/viewtopic.php?f=28&amp;t=10578
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By notiflux
      Unfortunately, this project has come to a halt, at least for now. I don't have enough time to work on the project and it's lacking behind, so please don't use it for configuring OpenCore, it will produce broken configuration files.
      I will leave the source code on GitHub, so in case someone wants to take over the project, they can.
       
      original post:
      OpenCore Configurator Source
    • By clockT
      sono un pò arrugginito ..e volevo chiedere un aiuto su come installare opencore anzichè clover. ho provato ma dopo il post installazione riesco solo a far partire catalina tramite pendrive. quale congifurazione sbaglio?
      EFI.zip

    • By rusty-bits
      Command line tool that will build a working EFI folder based on the settings in the config.plist file.
      https://github.com/rusty-bits/OC-tool
       
       
      you can also copy your config.plist to the RELEASE folder and double-click OC-tool  
      this is the same as running
      ./OC-tool -uo build release from the command line  
       
      see the wiki for more info  
       
      https://github.com/rusty-bits/OC-tool/wiki
       
      added functionality to the -T option  (update ver 1.6pt)  

      TUI (Text based User Interface) now has limited functionality  
      kexts, drivers, tools and quirks can be toggled on or off, then by pressing g an EFI folder will be created based on what you set  
       
       
      working:  
      - BOOT/BOOTx64.efi built automatically  
      - OC/OpenCore.efi build automatically
      - OC/ACPI folder built automatically from settings in ACPI/Add section of config.plist  
      - - the tool can compile .dsl to .aml on the fly if iasl is present, but I recommend compiling them to .aml yourself for the tool to move over  
      - OC/Drivers folder built automatically from settings in UEFI/Drivers section of config.plist  
      - OC/kexts folder built automatically from settings in Kernel/Add section of config.plist  
      - OC/Tools/Shell.efi built automatically from setings in Misc/Tools section of config.plist  
      - OC/vault.plist and OC/vault.sig are built automatically from the Misc/Security/RequireVault setting in config.plist  
      - can specify debug or release version of resources to be built  
      - parses plist files internally, no longer needs to call /usr/libexec/PlistBuddy which may not exist on Catalina  
      - kexts, drivers, tools and quirks can be enabled or disabled before building the EFI by using the -T option  
       
×