Jump to content

5,108 posts in this topic

Recommended Posts

Advertisement

After updating to the latest version, I want to experience the sound effect of the boot interface, but I found that it could not play. After getting the log, I found that the prompt was not supported. I wonder if this is my sound card model not supported?

image.thumb.png.248a22609aac1aca44f7f20c93eff848.png

 

Is this my sound card not supported? My sound card is Conexant CX20724!

Edited by btwise

Share this post


Link to post
Share on other sites
55 minutes ago, btwise said:

After updating to the latest version, I want to experience the sound effect of the boot interface, but I found that it could not play. After getting the log, I found that the prompt was not supported. I wonder if this is my sound card model not supported?

image.thumb.png.248a22609aac1aca44f7f20c93eff848.png

 

Is this my sound card not supported? My sound card is Conexant CX20724!


 I don't know,, change zh-Hans:25 to en:252 for prev-lang:kbd maybe 

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

Hi

Trying to get the Chime sound..... this is what I get 

 

03:565 00:010 OCAU: System volume is 32 (calculated from 32) - Success
03:576 00:010 OCAU: Matching PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,01000000)...
03:586 00:010 HdaCodecAudioIoGetOutputs(): start
03:598 00:012 HdaCodecGetSupportedPcmRates(): start
03:609 00:011 HdaCodecGetOutputDac(): start
03:621 00:012 HdaCodecGetSupportedPcmRates(): start
03:631 00:010 HdaCodecGetOutputDac(): start
03:642 00:010 HdaCodecGetSupportedPcmRates(): start
03:652 00:010 HdaCodecGetOutputDac(): start
03:662 00:010 HdaCodecGetSupportedPcmRates(): start
03:672 00:010 HdaCodecGetOutputDac(): start
03:682 00:010 HdaCodecGetSupportedPcmRates(): start
03:693 00:010 HdaCodecGetOutputDac(): start
03:703 00:010 HdaCodecGetSupportedPcmRates(): start
03:713 00:010 HdaCodecGetOutputDac(): start
03:725 00:012 OCAU: 1/1 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (6 outputs) - Success
03:735 00:010 OCAU: Cannot find specified audio device - Not Found
03:746 00:010 OC: Audio connection failed - Not Found

I try to use Audio over HDMI of my Vega56.... not sure what the not found Audio device means.

What could I try next?

Share this post


Link to post
Share on other sites
1 hour ago, Andres ZeroCross said:


 I don't know,, change zh-Hans:25 to en:252 for prev-lang:kbd maybe 

I think it has nothing to do with language!

Share this post


Link to post
Share on other sites
18 minutes ago, btwise said:

I think it has nothing to do with language!


Did you really read the doc???? however if Zh language is not found it should be used EN as default language, but it's bug or other.

But the fact is, prev-lang:kbd is related to Voice assistant

image.png.d069fc24f97bb8df0a6c051a3d899cbb.png

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites
2 minutes ago, Andres ZeroCross said:


Did you really read the doc???? however if Zh language is not found it should be used EN as default language, but it's bug or other.

But the fact is, prev-lang:kbd is related to Voice assistant

image.png.d069fc24f97bb8df0a6c051a3d899cbb.png

I just need the sound "ocefiaudio_voiceover_boot.wav", whose file name has no language attribute!

Share this post


Link to post
Share on other sites
39 minutes ago, Mike Ranger said:

Hi

Trying to get the Chime sound..... this is what I get 

 


03:565 00:010 OCAU: System volume is 32 (calculated from 32) - Success
03:576 00:010 OCAU: Matching PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,01000000)...
03:586 00:010 HdaCodecAudioIoGetOutputs(): start
03:598 00:012 HdaCodecGetSupportedPcmRates(): start
03:609 00:011 HdaCodecGetOutputDac(): start
03:621 00:012 HdaCodecGetSupportedPcmRates(): start
03:631 00:010 HdaCodecGetOutputDac(): start
03:642 00:010 HdaCodecGetSupportedPcmRates(): start
03:652 00:010 HdaCodecGetOutputDac(): start
03:662 00:010 HdaCodecGetSupportedPcmRates(): start
03:672 00:010 HdaCodecGetOutputDac(): start
03:682 00:010 HdaCodecGetSupportedPcmRates(): start
03:693 00:010 HdaCodecGetOutputDac(): start
03:703 00:010 HdaCodecGetSupportedPcmRates(): start
03:713 00:010 HdaCodecGetOutputDac(): start
03:725 00:012 OCAU: 1/1 PciRoot(0x0)/Pci(0x3,0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (6 outputs) - Success
03:735 00:010 OCAU: Cannot find specified audio device - Not Found
03:746 00:010 OC: Audio connection failed - Not Found

I try to use Audio over HDMI of my Vega56.... not sure what the not found Audio device means.

What could I try next?


Can you upload your config.plist?? How did you write the AudioDevice properties???

2 minutes ago, btwise said:

I just need the sound "ocefiaudio_voiceover_boot.wav", whose file name has no language attribute!

For BootChime is yes (universal), but not for VoiceAssistant  (it's depend your prev-lang:kbd)

Share this post


Link to post
Share on other sites

@btwise, either your audio card is unsupported, or your AudioOut is not correct, try to bruteforce all the values from 0 to N-1 outputs.

 

@Mike Ranger, you have incorrect AudioCodec. If you look closely, your card has it at address 1, while you have address 0 requested.

Share this post


Link to post
Share on other sites
1 hour ago, Mike Ranger said:

I try to use Audio over HDMI of my Vega56

HDMI not support.

2 hours ago, Andres ZeroCross said:

 I don't know,, change zh-Hans:25 to en:252 for prev-lang:kbd maybe 


If there is no specified language, there will be an English automatically.

Share this post


Link to post
Share on other sites
13 minutes ago, vit9696 said:

either your audio card is unsupported, or your AudioOut is not correct, try to bruteforce all the values from 0 to N-1 outputs.

I also think the sound card is not supported, but I don't know exactly which models AudioDxe supports. The output values of 0 and 1 log have no errors, and the error is indicated after trying 2, so there are not many values to try!

 

You are a developer god worth worshipping!:)

Share this post


Link to post
Share on other sites
5 hours ago, Andres ZeroCross said:

OpenCore latest Commit with External GUI + Audio (Boot Chime and VoiceAssistant) :)

 

You move only on one step to the menu, try to click quickly arrows several times, you shall transfer directly to some steps. Otherwise it is a problem ndk.

Share this post


Link to post
Share on other sites
5 minutes ago, Andrey1970 said:

 

You move only on one step to the menu, try to click quickly arrows several times, you shall transfer directly to some steps. Otherwise it is a problem ndk.


Ok, i tested with PickerMode Builtin and external

With Builtin
- After boot chime then VoiceAssistant will mention all entry until finish (i can't interrupt it with arrow button even with many press on it, is this by designed??)
- After VoiceAssistant finish mention all entry, then i press then arrow 1x and Voice assistant mention entry name, then i press arrow key several times (4x maybe) and i can fast move the entry selection (I though it good and normal)

With External
- After boot chime then VoiceAssistant will mention all entry until finish (i can't interrupt it with arrow button even with many press on it, is this by designed??)
- After VoiceAssistant finish mention all entry, then i press then arrow 1x and Voice assistant mention entry name, then i press arrow key several times (4x maybe) and I CAN'T fast move the entry selection (I thought it's NDK-BootPicker.efi problem / bug)

Share this post


Link to post
Share on other sites
3 minutes ago, Andres ZeroCross said:

and I CAN'T fast move the entry selection (I thought it's NDK-BootPicker.efi problem / bug)

Yes it is bug ndk.

Share this post


Link to post
Share on other sites
7 minutes ago, Andres ZeroCross said:

After boot chime then VoiceAssistant will mention all entry until finish (i can't interrupt it with arrow button even with many press on it, is this by designed??)

Yes it is normal.

You shall understand that it for people with sight problems.

Share this post


Link to post
Share on other sites
35 minutes ago, Andrey1970 said:

HDMI not support.


If there is no specified language, there will be an English automatically.

 

Well.... then if HDMI Audio is not supported please add it to the documentation.

To me that is a crucial feature, because ideally you have audio from your monitor... my monitor only supports HDMI audio.

For Notebooks this is a different situation, but I guess most users here use Desktop machines.

Is it technically feasible to have HDMI audio as well?

Another thought.... there might be users who just want the chime without the other audio support... something to consider.

 

Thanks

 

Share this post


Link to post
Share on other sites
8 minutes ago, Mike Ranger said:

 

Well.... then if HDMI Audio is not supported please add it to the documentation.

To me that is a crucial feature, because ideally you have audio from your monitor... my monitor only supports HDMI audio.

For Notebooks this is a different situation, but I guess most users here use Desktop machines.

Is it technically feasible to have HDMI audio as well?

Another thought.... there might be users who just want the chime without the other audio support... something to consider.

 

Thanks

 

 

Ask https://github.com/Goldfish64

Share this post


Link to post
Share on other sites

Guys, I'm having lots of problems trying to install Catalina (with OpenCore 0.55) in this computer:

CPU: intel i7-2600 (Sandy Bridge)
MAINBOARD: Gigabyte GA-P67A-D3-B3 (rev. 1.0) bios F7
GPU: ASUS GT640-2GD3 (Kepler)

I've carefully followed this guide, using Legacy Emulated NVRAM settings:
https://khronokernel.github.io/Opencore-Vanilla-Desktop-Guide/config.plist/ivy-bridge.html

But the computer hangs at the Apple Logo, and I noticed that all my BIOS settings are reset to factory defaults!!

This mainboard unfortunately has the dreaded "Gigabyte Hybrid EFI" bios, and I'm guessing that's the source of my suffering :( Is there anything I can do?

This computer is able to boot with Clover (using legacy boot), but I'd really like to migrate to OpenCore

Share this post


Link to post
Share on other sites

Realtek ALC1220 on AMD MSI mobo, somewhat works. It only plays the boot chime sound 1/3 of the length though.

 

OCAU: Matching PciRoot(0x0)/Pci(0x8,0x1)/Pci(0x0,0x4)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000)
OCAU: 1/2 PciRoot(0x0)/Pci(0x3,0x1)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (6 outputs) - Success
OCAU: 2/2 PciRoot(0x0)/Pci(0x8,0x1)/Pci(0x0,0x4)/VenMsg(A9003FEB-D806-41DB-A491-5405FEEF46C3,00000000) (5 outputs) - Success

 

Edited by Pavo

Share this post


Link to post
Share on other sites

Guys finally I got this and saying Audio connection failed.

 

272255879_ScreenShot2020-02-29at17_52_11.thumb.png.a878d0b07e21b3672158d0255fe10dae.png

 

I set up this way but still saying Audio Connection Failed;

 

491771208_ScreenShot2020-02-29at18_14_56.thumb.png.794891b35b1c05671870102871142e69.png

Share this post


Link to post
Share on other sites
Just now, telepati said:

Guys finally I got this and saying Audio connection failed.

 

272255879_ScreenShot2020-02-29at17_52_11.thumb.png.a878d0b07e21b3672158d0255fe10dae.png

 

I set up this way but still saying Audio Connection Failed;

 

491771208_ScreenShot2020-02-29at18_14_56.thumb.png.794891b35b1c05671870102871142e69.png

Your AudioCodec and AudioOut is wrong, AudioCodec should be 0 and AudioOut looks like it is 0 or 2.

Share this post


Link to post
Share on other sites
2 hours ago, vit9696 said:

either your audio card is unsupported, or your AudioOut is not correct, try to bruteforce all the values from 0 to N-1 outputs.

In the same environment, using bootchimecfg of goldfish, test playing the built-in ChimeData is completely normal, but it cannot be played under OC!

image.png.cc1ef88d01be8b5d51bde46599b3c8e4.png

Share this post


Link to post
Share on other sites
9 minutes ago, Pavo said:

Your AudioCodec and AudioOut is wrong, AudioCodec should be 0 and AudioOut looks like it is 0 or 2.

I used 0/0 and looks like working on debug.log. But I can't hear the sound on boot that's weird.

 

312680541_ScreenShot2020-02-29at18_26_55.thumb.png.095150533e694a2ce8c80a1cea565276.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By blackosx
      Do you want to quickly find your boot log, or ever wanted to know which version of bootloader is installed on your disk(s), had the need to dump your BIOS from OS X, just curious about your own system setup or been asked to provide your setup information to others when asking for assistance?
       
      DarwinDumper is a useful collection of readily available tools, and scripts wrapped in an application framework giving you a convenient method to quickly gather a system overview of your hack or Mac. And rest assured that enabling the privacy option will mask sensitive data like the IOPlatformSerialNumber, IOPlatformUUID, IOMACAddress(s), USB Serial Number(s), SystemSerialNumber, serial-number, fmm-mobileme-token-FMM, MLB and ROM efi vars and CustomUUID in the dumped files and report.
       
      Current Release Version: 3.0.4, though latest beta DarwinDumper_v3.1.0b6



      The system dumps are saved to a folder or your choice, but defaulting to the same directory as the main application. You can choose to setup a symlink to make it simple to run DarwinDumper from the Terminal.
       
      There is an option to create an html report showing a complete overview of the dumps. This report will mostly just contain the text dumps as you'll find in the main dump directory, but for some dumps there is extra processing to try to present the information in a better way. For example, the Disk Partitions and Unique ID's dump will show a visual map of the disk layout, and the DMI Tables (SMBIOS) dump will show the data split by table type.
       

       
      Note: The html report does not contain all files from a complete dump so if seeking assistance for a problem and you wish to send someone a DarwinDump then you will want to send the complete dump directory and not just the .html report file.
       
      The following can be read and dumped by DarwinDumper:
      - ACPI tables.
      - Audio codec and further info.
      - Boot loaders and configuration files.
      - CPU info.
      - Device-properties.
      - Disk partition structure / info.
      - Disk sectors (hex).
      - DMI (SMBIOS).
      - EDID.
      - I/O Kit Registry.
      - EFI Memory Map.
      - EFI vars (some).
      - Kernel information
      - Kexts - (list of currently loaded kexts).
      - Memory.
      - NVRAM (both Apple specific and UEFI firmware variables).
      - SMC Keys.
      - LSPCI (PCI vendor & device codes) dumps.
      - Power (Sleep/Hibernate) settings.
      - RTC.
      - System Profiler.
      - System BIOS.
      - System Log(s).
      - Video BIOS.
       
      License:
      DarwinDumper is licensed under GNU General Public License, version 3.0 (GPLv3).
       
      Tools included:
      AnalyseVBIOS
      Copyright: Not Known. License: Not known Source: http://www.insanelymac.com/forum/topic/211294-information-on-vesa-modes-in-atinvidia-bios/   AppleIntelInfo Copyright: © 2012-2017 Pike R. Alpha. All rights reserved. License: Creative Commons Attribution-NonCommercial https://github.com/Piker-Alpha/AppleIntelInfo   atomdis Copyright: Michael Larabel @ Phoronix.com License: GPL Version 2 Source: http://www.phoronix.com/scan.php?page=article&item=amd_atombios_dumper   bgrep Copyright 2009 Felix Domke <tmbinc@elitedvb.net>. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:      1. Redistributions of source code must retain the above copyright notice, this list of       conditions and the following disclaimer.      2. Redistributions in binary form must reproduce the above copyright notice, this list       of conditions and the following disclaimer in the documentation and/or other materials       provided with the distribution.   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the copyright holder.   Source: https://github.com/tmbinc/bgrep   bdmesg Copyright 2010 by Islam M. Ahmed Zaid. All rights reserved. License: GPL Version 2 Source: http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/util/bdmesg.c   cmosDumperForOsx Created by rafirafi, revised extensively by STLVNUB License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2432&st=0&p=21522&&do=findComment&comment=21522   csrstat Created by Piker-Alpha Copyright: © 2015-2017) by Pike R. Alpha License: Information not available Source: https://github.com/Piker-Alpha/csrstat   dmidecode http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2488   dumpACPI Created by blackosx. Idea taken from PHPdev32's MacIASL. Source: https://bitbucket.org/blackosx/dumpacpi   edid-decode Created by Adam Jackson, revised by Andy Vandijck License: Information not available Original Source: http://cgit.freedesktop.org/xorg/app/edid-decode Revised Source: http://bit.ly/1qAzqxb   fdisk440 Apple Computer, Inc. License: APSL v2.0 Source: http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj   FirmwareMemoryMap script Amit Singh (showbootermemorymap) License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2447&st=120&p=19329&&do=findComment&comment=19329   flashrom http://flashrom.org/Flashrom License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2485&view=findpost&p=40285   getcodecid Copyright © 2012 AnV Software. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/285277-getcodecid-command-line-tool-to-detect-codec-id/   getdump Created by fassl?, modifications by Slice and AutumnRain? License: Information not available Source: https://svn.code.sf.net/p/voodoohda/code/tranc/getdump.c   gfxutil Copyright 2008 mcmatrix. All rights reserved. License: Information not available http://forum.netkas.org/index.php?PHPSESSID=q2isd338ihjjpcgbng7tne08pdv7tr4f&topic=64.0 Source: https://dl.dropbox.com/u/222155/gfxutil_source.zip   iasl Copyright © 2000 – 2014 Intel Corporation. License: Information not available Source: https://github.com/acpica/acpica   ioregwv Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/ioregwv   lzma Copyright © 2013 Igor Pavlov. License: GNU Lesser General Public License Source: http://www.7-zip.org/sdk.html   lzvn Copyright: © 2014 Apple Computer, Inc. All rights reserved. License: APSL Credit: Piker-Alpha, Andy Vandijck, MinusZwei. https://github.com/Piker-Alpha/LZVN   MacGap2 Created by Tim Debo. All rights reserved. License: MIT Source: https://github.com/MacGapProject/MacGap2   nvram Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/nvram   oclinfo Copyright © 2009 cmf License: GPL Version 2 Source: http://www.insanelymac.com/forum/topic/170796-opencl-info/   pciutils driver (DirectHW.kext) DirectHW is Copyright © 2008-2010 coresystems GmbH License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2480   pciutils lspci Copyright © 1997--2008 Martin Mares License: GPL Version 2 Source Code: https://kernel.googlesource.com/pub/scm/utils/pciutils/pciutils.git/+/master   Macpmem driver (Macpmem.kext) Copyright © 2007-2011 Volatile Systems. Copyright 2013-2014 Google Inc. All Rights Reserved. License: GPL Version 2 Source Code: https://github.com/google/rekall/tree/master/tools/osx/MacPmem]https://github.com/google/rekall/tree/master/tools/osx/MacPmem   RadeonDump Created by Dong Luo. Copyright 2008. All rights reserved. Modified by Andy Vandijck License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   radeon_bios_decode Created by Dong Luo. Copyright 2008. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   smbios-reader http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2208   SMC_util3 Copyright © 2006 devnull  License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=23230   VoodooHDA.kext Created by fassl?, modifications by Slice and AutumnRain? License: https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h]https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h Source: https://sourceforge.net/p/voodoohda/code/HEAD/tree/]https://sourceforge.net/p/voodoohda/code/HEAD/tree/   x86info Written to succeed CPUID by Phil Karn (KA9Q). Contributed to by various people. OS X compatability by Slice License: GPL Version 2 Original Source: https://github.com/kernelslacker/x86info Revised Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=41134  
       
      Running DarwinDumper from the command line:
      From Terminal, you can initiate DarwinDumper by running the following script directly.
       
       
       
      /DarwinDumper.app/Contents/Resources/public/bash/script.sh To help with this, the UI has a Symlink option which you can click to create a symbolic link which points to the above script. DarwinDumper can then be subsequently run from the command-line by loading a new Terminal window and typing darwindumper followed by return.

      Credits (in alphabetical order):
      Adam Jackson, Amit Singh, Andy Vandijck, Apple Inc., arsradu, bcc9, blackosx, cmf, DieBuche, dmazar, Dong Luo, droplets, ErmaC, Felix Domke, Google Inc., Intel Corporation, InsanelyDeepak, JrCs, Kabyl, Kynnder, Martin Mareš, mcmatrix, Michael Larabel, Mickey1979, phcoder, Phil Karn, Piker-Alpha, rafirafi, гык-sse2, Slice ,sonotone, STLVNUB, THe KiNG, Trauma, Volatile Systems, xsmile, !Xabbu.
       
      DarwinDumper was originally inspired as an open project by Trauma, it has remained an open project and please keep it an open project, so if you make any changes or additions to it then please share your work here.
       
      Please report any feedback, requests or bugs.
       
      Please note:
      DarwinDumper v3 requires OS X 10.9 and newer to run in the Finder, though it should work from the command line okay on older OS versions.

      The following link retains the download for v2.9.9.2 for older OS versions.

      DarwinDumper Download
    • By alexbohariuc
      Hey guys, I'm new here, so hello world!
       
      Here we go. 
      I have the following configuration:
      Gigabyte Aorus Master Z390 i9 9900K Sapphire Vega 64 Nitro+ Corsair Vengeance 64GB 3000Mhz Corsair H150i PRO (disconnected from the internal USB) Samsung Evo 970 1 TB - Catalina Install Intel 660p 1tb - simple storage drive  
      I have the latest Catalina version installed with OpenCore 0.5.8 Bootloader.
      I have followed the guide, and also relied on this EFI, since I have the same hardware: https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh

      When idle the pc freezes - becomes unresponsive and my router disconnects from the internet (Archer C9, connected via PPPOE user/pass).
      Besides the freezing issue, which I’m not sure where it comes from, the internet disconnection just puzzles me. Any ideas?
       
      Things I tried so far:
       
      Reset NVRAM Disabled cfg lock Removed the BT BCM94360CS2 from the internal USB port (solved the sleep issue) Removed IntelMausiEthernet.kext and disabled the NIC in BIOS - saw some similar problems related to this Used Vgtab to generate the power table for the video card (Sapphire Vega 64 Nitro+)  
      Also, before OC bootloader is loaded I get this message, but otherwise boots normally:
      OC: Setting NVRAM 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:rtc-blacklist - Not Found
       
      I'll try replacing IntelMausiEthernet.kext with IntelMausi from Acidanthera, but I don't think it will make any difference since disabling the NIC and removing IntelMausiEthernet didn't do anything.
      Delete the entries from Add and Block in config.plist to remove the NVRAM error above - although since it boots I don't think it's related to my freezing issue.
       
      Any ideas?
       
      Thanks in advance!
    • By STLVNUB
      Script file to clone and help build Clover, Opencore (official and unofficial) repos
      Script will create link to itself in /usr/local/bin/bob
      Wouldn't hurt to check there are no "Bob"'s there, i "Hope" there isn't.
      Then you only need to type bob. and a parameter
      "n" for NDK repo, unofficial
      "a" for ACID repo, official
      "c" for CLOVER
      It also takes "all" for ALL, if your game
       
      Easier typing bob than.....usual stuff
      Enjoy
       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By heiza
      Ryzen 7 2700X
      ASUS Prime X470 Pro
      32GB G.Skill Ripjaws V DDR4-3200
      ASRock Phantom Gaming Vega 56
       
      My motherboard doesn’t have an option for 4G encoding. And boot modes are listed as ”Windows UEFI Mode” and “Other OS”.
       
×