Jump to content

3,294 posts in this topic

Recommended Posts

X299 sample SSDT

 

ACPI patch

Comment  -   change _DSM to XDSM  Support SSDT Direct patch For XHCI, LPC0, SAT1,

Find          -   5F44534D

Replace   -    5844534D

 

X299-SSDT.zip

Share this post


Link to post
Share on other sites
Advertisement

Hi, I use Thinkpad T450s, here is my EFI: https://github.com/crazyi/Hackintosh-Catalina-OpenCore-Lenovo-T450s-efi

 

OC 0.5.0-0.5.3 works perfectly on my laptop until I upgrade it to 0.5.4, I can not use number key to choose pickers.

The only changes I make in the config.plist are adding some new quirks mentioned in the configuration.pdf and all these new quirks are set to faulse.

Can anyone give me some tips?

 

Config.plist

opencore-2020-01-17-110836.txt

Edited by crazyi

Share this post


Link to post
Share on other sites

First check Configuration.pdf if you have doubts or if you think you're missing something, and try to stick with it as much as you can. 

 

https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Configuration.pdf

 

Check Khronokernel's guide in matter of keyboard issues and whether to choose to enable built-in support or disabling it and using AppleUSBdxe.efi

 

Set this if you're not using the driver previously mentioned

  • ShowPicker: YES

    • Shows OpenCore's UI, needed for seeing your available drives or set to NO to follow default option

  • UsePicker: YES

    • Uses OpenCore's default GUI, set to NO if you wish to use a different GUI

 

KeySupport: YES

  • Enables OpenCore's built in key support and required for boot picker selection, do not use with AppleUsbKbDxe.efi

 

https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide

Edited by 1Ale1
clarification on main guide added

Share this post


Link to post
Share on other sites
30 minutes ago, 1Ale1 said:

First check Configuration.pdf if you have doubts or if you think you're missing something, and try to stick with it as much as you can. 

 

https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/Configuration.pdf

 

Check Khronokernel's guide in matter of keyboard issues and whether to choose to enable built-in support or disabling it and using AppleUSBdxe.efi

 

Set this if you're not using the driver previously mentioned

  • ShowPicker: YES

    • Shows OpenCore's UI, needed for seeing your available drives or set to NO to follow default option

  • UsePicker: YES

    • Uses OpenCore's default GUI, set to NO if you wish to use a different GUI

 

KeySupport: YES

  • Enables OpenCore's built in key support and required for boot picker selection, do not use with AppleUsbKbDxe.efi

 

https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide

Thanks for your tips, problem solved.

But it is weird those config works well in oc 0.5.3

Share this post


Link to post
Share on other sites
9 hours ago, syn909 said:

@Ellybz

I got it here you posted it a while back. I got rid of the errors! Curious are you using the USBX ssdt? From what I read we "need it" but it does not seem like thats the case. Also you able to boot into the Recovery partition? I heard it might not work due to my card being a rx 5700xt not sure

I wasn't originally but I'm using it now. It regulates power on USB ports much better while using sleep/wake functions. Never tried recovery. I'm cloning my drives with CCC (in case of any issue).

Edited by Ellybz

Share this post


Link to post
Share on other sites

Hi guys! After years of Clover I was curious to try OpenCore, booted from USB;
1st build with Gigabyte Z370 + i5 + integrated graphics + NVME SSD & Mojave worked flawlessly with native NVRAM,
2nd build with Gigabyte Z390 + i9 + Radeon graphics + NVME SSD & Mojave can't boot, stuck at
apfs_module_start:1393: load: com.apple.filesystem.apfs...
virtual IOReturn IONVMeController:CreateSubsissionQueue...

 

I spent some hours to understand what happens, after reading Configuration pdf, anyone went trough my same problem?
Because I'm using Emulated NVRAM with Clover is it possible that nvram.plist or CloverHelper on the main drive are interfering with OC?

Thanks!

Edit: SSDT-AWAC is loaded on both builds
Update: Tested SSDT-RTC0, removed nvram.plist and CloverHelper, tried different settings, still can't boot from main drive or install usb. If someone want to take a look at my Config.plist here is the link: https://pastebin.com/vri9HQ0U
photo of the screen/error: https://ibb.co/NyFSZc3

Edited by Simonej
Update

Share this post


Link to post
Share on other sites
7 hours ago, Simonej said:

Hi guys! After years of Clover I was curious to try OpenCore, booted from USB;
1st build with Gigabyte Z370 + i5 + integrated graphics + NVME SSD worked flawlessly with native NVRAM,
2nd build with Gigabyte Z390 + i9 + Radeon graphics + NVME SSD can't boot, stuck at
apfs_module_start:1393: load: com.apple.filesystem.apfs...
virtual IOReturn IONVMeController:CreateSubsissionQueue...

 

I spent some hours to understand what happens, after reading Configuration pdf, anyone went trough my same problem?
Because I'm using Emulated NVRAM with Clover is it possible that nvram.plist or CloverHelper on the main drive are interfering with OC?

Thanks!

 

did you load SSDT-AWAC.aml? 

Share this post


Link to post
Share on other sites
7 hours ago, justin said:

 

did you load SSDT-AWAC.aml? 

 Yes Justin, already tried

Share this post


Link to post
Share on other sites

I want to install windows 10 using BootCamp. I remember trying a couple of months and worked, now it is showing this... How can I fix it? 

 

I'm running OC 0.5.4 and MacOS Catalina 10.15.2

Screenshot 2020-01-20 at 04.58.23.png

Share this post


Link to post
Share on other sites

Any idea why am I getting this with OC? I suspected it to be a SMBIOS problem. But it's already the latest firmware, as far as I know.

OC.zip

Screenshot 2020-01-20 at 5.34.10 PM.png

Share this post


Link to post
Share on other sites
34 minutes ago, Muntashir said:

Any idea why am I getting this with OC? I suspected it to be a SMBIOS problem. But it's already the latest firmware, as far as I know.

OC.zip

Screenshot 2020-01-20 at 5.34.10 PM.png

New firmware versions were part of 0.5.4 release.. have you updated to it?

Share this post


Link to post
Share on other sites
2 minutes ago, canyondust said:

New firmware versions were part of 0.5.4 release.. have you updated to it? 

I'm on currently on 0.5.4.

5 minutes ago, gengik84 said:

automatic= Yes 

OK. Let me try.

Share this post


Link to post
Share on other sites
18 minutes ago, gengik84 said:

try again

Well, it worked. Probably keeping Bios and Firmware configs empty would work as well. But question is what did I do wrong?

Share this post


Link to post
Share on other sites
5 minutes ago, Download-Fritz said:

@Erroruser SSDT-PMC will fix Z390 NVRAM

yes i have done that 

but with the others need to be redone or they are just good to use as i have them?

Share this post


Link to post
Share on other sites

Hi to all , why i am seeing this while my config plist have all the smbios properly configutre , i am using OC latest release , , Os Catalina, any help please

Screenshot 2020-01-20 at 18.51.00.png

Share this post


Link to post
Share on other sites
6 minutes ago, PC IT said:

Hi to all , why i am seeing this while my config plist have all the smbios properly configutre , i am using OC latest release , , Os Catalina, any help please

Screenshot 2020-01-20 at 18.51.00.png

 

1292284065_ScreenShot2020-01-20at21_01_48.png.c6df82d95399dcaed902ff40679777fc.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By DI2edd
      Hi,
       
      I'm writing from a Catalina QEMU/KVM VM which, I must say, works pretty damn well besides the fact that rebooting just doesn't work. But first, a bit of background:
      I'm using OpenCore 0.5.5 through DuetPkg because I'm forced on SeaBIOS (legacy boot) because of legacy IGD passthrough (OVMF doesn't support the semi-hack that's needed for it to function), and that works well enough; I switched from Clover because it didn't allow me to use the "host" cpu model on QEMU, which OpenCore did, and so far so good.
       
      The problem is that, whenever i attempt a reboot, the screen would just turn black and thats's it. I can even see that every 30 seconds it polls the battery's status through ACPI (I modified QEMU for that and left some debugging printfs).
      On the other hand, shutting down works as expected. One thing I noticed is that, on shutdown, I can see the last line of verbose output on the screen is "CPU_HALTED", whereas on reboot I don't get that (don't even know if that's to be expected).
       
      The point is that I'm not even sure this is a bootloader issue, because I booted a Fedora live ISO through OpenCore, and that rebooted with no problems, but at the same time I remember that with Clover I didn't have such an issue. Perhaps it was one of Clover's "Fixes" that is not automatic with OpenCore?
       
      Anyway, I attached my config.plist.
       
      Thank you.
      config.plist
    • By SniperBuddy
      Hello guys,
      I'm relatively new to the world of hackintosh.
      I'm trying to install the latest Mac OS - Catalina with the help of Opencore, however, this is the error that's displayed while booting from the USB:
       
      https://drive.google.com/open?id=1Xd4V2wZ2fEsgRyfVcXlJHXMPGa85g2s3
       
      You can take a look at my config.plist file from here - https://drive.google.com/file/d/17FZpTcVp4RFSaxdm6yW4uELkt7MaLdmt/view?usp=sharing
       
      I'm using the Acer E575 G laptop with Kabylake (i5 7200u)
       
      Any help would be gladly appreciated!
       
      Edit: I've fixed this problem by following this guide completely - https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/intel-config.plist/kaby-lake
       
      This is due to OpenCore being unable to find any drives with the current ScanPolicy, setting to 0 will allow all boot options to be shown
       
       
       
       
       
       
       
    • By DanZiRuleZ
      Dear All, 
       
      trying to install Catalina on my ASUS Z87 Plus, I followed the Haswell guide to the letter, all set up now, USB stick boots ok, Catalina installs on SSD, but then when trying to boot it I am receiving Kernel Panic and no idea how to move forward. 
       
      Have the debug options, but opencore will only dump boot messages where I don't see much sticking out.
       
      My last resort would be just installing clover on the already installed SSD's EFI partition, it at all possible. High Sierra is working fine and I did get Clover with Mojave once but stuck with High Sierra with my GTX960 video card...
       
      Attached is the kernel panic and my EFI setup if anyone can help me troubleshoot.
      Many thanks
      D.
       

      EFI.zip
    • By n.d.k
      After several weeks of testing OC bootloader,  disecting its source code and also Clover's source code as well, I finally switch from Clover to OC as my main bootloader. Wait! don't get the wrong idea that OpenCore is better than Clover. They both work equally well, producing a bootable macOS as an end result with simliar boot time. OC design direction is different with Clover, I believe it's not intended as a Clover replacement, but more narrowing down to macOS specifically. However, macOS is not the only OS that i am using, so, i decided to add some minimal necessary source code modification to the OC to get some of the features I need. I like to share my customized OC forked https://github.com/n-d-k/OpenCorePkg , you have to compile it yourself if you want, i will not provide pre build binary.    
       
      Additional features/changes:
      ============
       
      [ Multi-Boot ]
        - ACPI patches are optional for non macOS with setting ACPI->Quirks->EnableForAll to yes (default is no).
        - Booter Quirtks, SMBIOS and Device Properties patches will only applied to macOS.
          
      [ Hotkeys ]
        - Full functional Hotkeys [1-9] corresponding to Boot Entry's Index number and dedicated W (Windows) / X (macOS) keys can be used without seeing Boot Picker.
        - While in boot picker, F10 can use to take a snapshot of the screen.
                
      [ Ui Boot Picker ]
        - Bios Date/time, auto boot to the same OS or manual set to always boot one OS mode, and OC version are displayed in boot picker.
        - Auto boot to previous booted OS (if Misc->Security->AllowSetDefault is NO/false).
        - macOS Recovery/Tools Entries are hidden by default, use Spacebar in Boot Menu as a toggle on/off to show/hide hidden entries.
                
      [ Custom Entries ]
         - Custom entries are now listed first in picker menu and by the orders they are appeared in Misc->Boot->Entries, before all other entries.
         - Ability to change entry name found by auto scanner by adding custom entry with the exact same device path,
           this will give users the option to complete change how all boot entries listed in Boot Picker.
          
      [ Others ]
         - No verbose apfs.efi driver loading (if using apfs.efi instead of ApfsDriverLoader.efi).
          - ndk-macbuild.tool script are set to compile with latest edk2 (One can easily set to stable edk2 if prefer).
          - NvmExpressDxe driver build script are also available for system without native nvme support. (Compatible with OC and Clover).
       
      Usage:
       - To build OpenCore, run "./ndk-macbuild.tool" at Terminal (require Xcode and Xcode Command Line Tool installed, and open xcode to accept license agreement before compiling).
       - To build NvmExpressDxe driver, run "./buildnvme.sh".
       
      4k screen resolutions

       
       

       
      Customized by @btwise

       
       
       
    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
×