Jump to content

3,294 posts in this topic

Recommended Posts

Advertisement

the solution to that is DevirtualiseMmio=true, which causes an early kernel crash... I heard whitelisting did not work, but it's not a report I trust. I expected you did all that already

Share this post


Link to post
Share on other sites
Posted (edited)

i miss latest part (whitelisting) because i have understood you say it was not useful

DevirtualizeMmio produces an early kernel crash as you said (not info from this on screen)

Edit

sorry seen now offtopic message

 

 

 

Edited by fabiosun
typo

Share this post


Link to post
Share on other sites
On 1/4/2020 at 9:29 PM, Andrey1970 said:

 

Try

Thank you !!

I've compiled it and it solved my power management problem.

 

Before i got 1.8PKG on intel power gadget while now i'm back on 0.8PKG (as was before when i was using a normal SSD)!

 

Thanks to all the devs !!

 

Mattia

 

Share this post


Link to post
Share on other sites

I'm surprised to see OpenCore almost working 100% on my first try...

 

I have one issue that I'm not sure how to debug... I use a separate encrypted APFS NVME that contains all of my /Users data. This disk normally auto mounts at boot, but I've noticed that it no longer works when I boot with OpenCore (Note it works fine booting though Clover).

When I open the disk utility, I can see the disk, but it's greyed out and I don't seem to have an option to decrypt/mount the disk. It feels like File Vault is simply non-functional. When I read through the OpenCore related data, it mentions how AppleImageLoader is not needed so I never bother loading it into my configuration.

 

Screen Shot 2020-01-07 at 4.24.59 PM.png

Share this post


Link to post
Share on other sites

Hello been trying to switch from clover to OpenCore but nothing seems to be working. I get the dreaded black screen and stuck at 

 

19:465 00:031 Prelinked status - Success
 

 

Here's my log and EFI.

 

Thanks for any help you can give. Tried 18,1 and 19,2 SMBIO 

 

| [CPU][Intel Core i7-8700K 3.7 GHz 6-Core Processor] | [CPU Cooler][Corsair H100i v2 70.69 CFM Liquid CPU Cooler] | [Motherboard][MSI Z370M GAMING PRO AC Micro ATX LGA1151 Motherboard] | [Memory][G.Skill Trident Z 16 GB (2 x 8 GB) DDR4-3200 Memory] | [Storage][Samsung 850 EVO-Series 500 GB 2.5" Solid State Drive] | [Video Card][Asus Radeon RX 580 8 GB ROG STRIX Video Card]

EFI.zip

opencore-2020-01-07-022337.txt

Share this post


Link to post
Share on other sites
1 hour ago, audiohackintosh said:

Hello been trying to switch from clover to OpenCore but nothing seems to be working. I get the dreaded black screen and stuck at 

 

19:465 00:031 Prelinked status - Success
 

 

Here's my log and EFI.

 

Thanks for any help you can give. Tried 18,1 and 19,2 SMBIO 

 

| [CPU][Intel Core i7-8700K 3.7 GHz 6-Core Processor] | [CPU Cooler][Corsair H100i v2 70.69 CFM Liquid CPU Cooler] | [Motherboard][MSI Z370M GAMING PRO AC Micro ATX LGA1151 Motherboard] | [Memory][G.Skill Trident Z 16 GB (2 x 8 GB) DDR4-3200 Memory] | [Storage][Samsung 850 EVO-Series 500 GB 2.5" Solid State Drive] | [Video Card][Asus Radeon RX 580 8 GB ROG STRIX Video Card]

EFI.zip

opencore-2020-01-07-022337.txt

Not an expert by any means but:

Get rid of all clover stuff

clean out kexts to only necessary ones

compile latest OC and create new config.plist using sample in doc's folder

I run a z390 board with a 580 and need no boot arg. i would think that is true on a 370 board

It is necessary to read the Reference Manual to get a viable system 

Share this post


Link to post
Share on other sites
1 minute ago, ken394 said:

Not an expert by any means but:

Get rid of all clover stuff

clean out kexts to only necessary ones

compile latest OC and create new config.plist using sample in doc's folder

I run a z390 board with a 580 and need no boot arg. i would think that is true on a 370 board

It is necessary to read the Reference Manual to get a viable system 

Hmm I followed the vanilla guide pretty exactly at first but that didn't work so I started porting over what worked on my clover config and still no luck. I'll try one more time but I'm not really expecting any different result. 

Share this post


Link to post
Share on other sites

Anyone knows how to get proper temp sensor info on my Radeon RX 5700? In HWMonitorSMC2 i see VRAM and Utilization.

843764797_Screenshot2020-01-10at00_04_16.png.fd1c9662a8d8570b164e89143179d89f.png

Share this post


Link to post
Share on other sites

 

 

Hi @PMheart

Can you check _cpuid_set_info 10.15.2

Intel Core i9-9980XE Skylake X

FakeCPUID

0x050654

 

 

#1

Base: _cpuid_set_info
Comment: FakeCPUID - Model 0xE (0x5E, SKL), 10.15.2
Count: 1
Enabled: YES
Find: 89C1C0E9 04FEC1
Identifier: kernel
Limit: 0
Mask: (LEAVE THIS EMPTY)
MatchKernel: 
Replace: B90E0000 00880D
ReplaceMask: (LEAVE THIS EMPTY)
Skip: 0

#2

Base: _cpuid_set_info
Comment: FakeCPUID - Ext 0x5 (0x5E, SKL), 10.15.2
Count: 1
Enabled: YES
Find: 89C1C1E9 1089
Identifier: kernel
Limit: 0
Mask: (LEAVE THIS EMPTY)
MatchKernel: 
Replace: B9050000 0080
ReplaceMask: (LEAVE THIS EMPTY)
Skip: 0

Can you check for 10.15.2.

Thanks PMheart.

Edited by nmano

Share this post


Link to post
Share on other sites

Hi @nmano, could you please explain why do you use patches for XCPM support for Xeons in a separate topic? OpenCore should have these builtin as explained in https://github.com/acidanthera/bugtracker/issues/365. We got a question from a user who found this and got very confused as this is definitely not what we designed.

  • Cpuid1Data/Cpuid1Mask are a replacement for xcpm_bootstrap patch (and FakeCPUID), and they should really be <d4 06 03 00 (fake id)…> <ff ff ff ff… all zeroes> correspondingly.
  • AppleXcpmCfgLock and AppleXcpmExtraMsrs should cover all the other patches

Perhaps something went wrong? Could you please provide us with the details?

Share this post


Link to post
Share on other sites

@nmano why do you need of those Patches?

Your CPU inserted on an ASUS x299 Sage 10g does not need any pathcing for it..only msr unlock to enable in motherboard bios
gigabyte x299 should also be unlocked (x299 designare ex was)

 

 

 

Share this post


Link to post
Share on other sites
3 hours ago, vit9696 said:

Hi @nmano, could you please explain why do you use patches for XCPM support for Xeons in a separate topic? OpenCore should have these builtin as explained in https://github.com/acidanthera/bugtracker/issues/365. We got a question from a user who found this and got very confused as this is definitely not what we designed.

  • Cpuid1Data/Cpuid1Mask are a replacement for xcpm_bootstrap patch (and FakeCPUID), and they should really be <d4 06 03 00 (fake id)…> <ff ff ff ff… all zeroes> correspondingly.
  • AppleXcpmCfgLock and AppleXcpmExtraMsrs should cover all the other patches

Perhaps something went wrong? Could you please provide us with the details?

Then it turns out cpu emulation is not working ?

2020-01-10 в 16.14.20.png

NO-Patch .png

+Patch-xcpm_bootstrap .png

Архив.zip

Edited by pitrysha

Share this post


Link to post
Share on other sites
31 minutes ago, vit9696 said:

@pitrysha, in your archive you fake to a CPU without XCPM support, I don't know what for and hot it is supposed to work. Most likely it should be d4 06 03 or c3 06 03.

Thanks . Everything works .

2020-01-10 в 17.36.45.zip

Share this post


Link to post
Share on other sites
8 hours ago, vit9696 said:

Hi @nmano, could you please explain why do you use patches for XCPM support for Xeons in a separate topic? OpenCore should have these builtin as explained in https://github.com/acidanthera/bugtracker/issues/365. We got a question from a user who found this and got very confused as this is definitely not what we designed.

  • Cpuid1Data/Cpuid1Mask are a replacement for xcpm_bootstrap patch (and FakeCPUID), and they should really be <d4 06 03 00 (fake id)…> <ff ff ff ff… all zeroes> correspondingly.
  • AppleXcpmCfgLock and AppleXcpmExtraMsrs should cover all the other patches

Perhaps something went wrong? Could you please provide us with the details?

Thanks @vit9696

Cpuid1Data-> 54060500 00000000 00000000 00000000

Cpuid1Mask->D4060300 00000000 00000000 00000000

Still I have to fix

ProcessorType not work properly.

If I run Geekbench 5 restart my system before report.

This topic for X99 XCPM patches get CPU p-States and CPU C3-Cores.

 

 

681793834_ScreenShot2020-01-10at1_12_36PM.png.3591bfdfb4d35aaecae686c26cbb6d15.png

 

imageproxy.php?img=&key=c17464ef1b1b51c71711755598_ScreenShot2020-01-10at1_17_34PM.thumb.png.c27b5f0b3f0ebdd253d4487a9f9a3da8.png

Edited by nmano

Share this post


Link to post
Share on other sites

@pitrysha, thanks for the test, this makes good sense to me.

 

@nmano, you do not understand what Cpuid1Data and Cpuid1Mask are, your values are garbage. See what @pitrysha did.

Cpuid1Data D4060300 00000000 00000000 00000000

Cpuid1Mask FFFFFFFF 00000000 00000000 00000000

 

As for ProcessorType, you set 0xF01, but it is only compatible with 8, 10, 14, or 18 cores.

Share this post


Link to post
Share on other sites

Attached are some bootlogs achieved with opencore 0.53 debug version

I have used two different rigs (AMD rigs) thanks to @iCanaro of macos86.it for his working 3950x system

3950x is working

3970x is not working
I would like to understand if also for opencore devs these logs seem similar as it seems to me..so problem is not related with bootloader itself but maybe some missing patches

 

Inside also a clover debug log

 

Thank you for your time and skills!

debug_OC 3950x_3970x_clover 3970x.zip

Share this post


Link to post
Share on other sites

@fabiosun, from the logs it looks like boot failed at boot.efi stage. Most likely due to memory allocation failure. Unfortunately we do not know any resolution at the moment and we also have no plans to perform any investigation as AMD is not a priority for us for the time being.

Share this post


Link to post
Share on other sites
1 hour ago, vit9696 said:

@pitrysha, thanks for the test, this makes good sense to me.

 

@nmano, you do not understand what Cpuid1Data and Cpuid1Mask are, your values are garbage. See what @pitrysha did.

Cpuid1Data D4060300 00000000 00000000 00000000

Cpuid1Mask FFFFFFFF 00000000 00000000 00000000

 

As for ProcessorType, you set 0xF01, but it is only compatible with 8, 10, 14, or 18 cores.

C3060300 for Haswell
D4060300 for Broadwell
Found on the Internet

Share this post


Link to post
Share on other sites
1 hour ago, fabiosun said:

@pitrysha

@nmano cpu is not of a type you say above and it is working without faking a bad  cpu type

 

If  do not enable the CPU Emulate or Patch _xcpm_bootstrap © Pike R. Alpha, the system will not boot. Сan enable PMDrvr.text instead. How right?

Архив.zip

Share this post


Link to post
Share on other sites
3 hours ago, vit9696 said:

@pitrysha, thanks for the test, this makes good sense to me.

 

@nmano, you do not understand what Cpuid1Data and Cpuid1Mask are, your values are garbage. See what @pitrysha did.

Cpuid1Data D4060300 00000000 00000000 00000000

Cpuid1Mask FFFFFFFF 00000000 00000000 00000000

 

As for ProcessorType, you set 0xF01, but it is only compatible with 8, 10, 14, or 18 cores.

I try Like this still CPU Type not work.

Geekbench 5 - worked now

Cpuid1Data  D4060300 00000000 00000000 00000000  

Cpuid1Mask  FFFFFFFF 00000000 00000000 00000000 

1495265211_ScreenShot2020-01-10at5_45_10PM.thumb.png.13331b08e118b48574fef42b83ca8284.png

 

933914941_ScreenShot2020-01-10at5_13_18PM.thumb.png.f04f0266f493350f34a3781dba1bc236.png

 

1937333053_ScreenShot2020-01-10at5_14_20PM.thumb.png.c357bfeec12137920f1be167e75c2773.png

 

Edited by nmano

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By DI2edd
      Hi,
       
      I'm writing from a Catalina QEMU/KVM VM which, I must say, works pretty damn well besides the fact that rebooting just doesn't work. But first, a bit of background:
      I'm using OpenCore 0.5.5 through DuetPkg because I'm forced on SeaBIOS (legacy boot) because of legacy IGD passthrough (OVMF doesn't support the semi-hack that's needed for it to function), and that works well enough; I switched from Clover because it didn't allow me to use the "host" cpu model on QEMU, which OpenCore did, and so far so good.
       
      The problem is that, whenever i attempt a reboot, the screen would just turn black and thats's it. I can even see that every 30 seconds it polls the battery's status through ACPI (I modified QEMU for that and left some debugging printfs).
      On the other hand, shutting down works as expected. One thing I noticed is that, on shutdown, I can see the last line of verbose output on the screen is "CPU_HALTED", whereas on reboot I don't get that (don't even know if that's to be expected).
       
      The point is that I'm not even sure this is a bootloader issue, because I booted a Fedora live ISO through OpenCore, and that rebooted with no problems, but at the same time I remember that with Clover I didn't have such an issue. Perhaps it was one of Clover's "Fixes" that is not automatic with OpenCore?
       
      Anyway, I attached my config.plist.
       
      Thank you.
      config.plist
    • By SniperBuddy
      Hello guys,
      I'm relatively new to the world of hackintosh.
      I'm trying to install the latest Mac OS - Catalina with the help of Opencore, however, this is the error that's displayed while booting from the USB:
       
      https://drive.google.com/open?id=1Xd4V2wZ2fEsgRyfVcXlJHXMPGa85g2s3
       
      You can take a look at my config.plist file from here - https://drive.google.com/file/d/17FZpTcVp4RFSaxdm6yW4uELkt7MaLdmt/view?usp=sharing
       
      I'm using the Acer E575 G laptop with Kabylake (i5 7200u)
       
      Any help would be gladly appreciated!
       
      Edit: I've fixed this problem by following this guide completely - https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/intel-config.plist/kaby-lake
       
      This is due to OpenCore being unable to find any drives with the current ScanPolicy, setting to 0 will allow all boot options to be shown
       
       
       
       
       
       
       
    • By DanZiRuleZ
      Dear All, 
       
      trying to install Catalina on my ASUS Z87 Plus, I followed the Haswell guide to the letter, all set up now, USB stick boots ok, Catalina installs on SSD, but then when trying to boot it I am receiving Kernel Panic and no idea how to move forward. 
       
      Have the debug options, but opencore will only dump boot messages where I don't see much sticking out.
       
      My last resort would be just installing clover on the already installed SSD's EFI partition, it at all possible. High Sierra is working fine and I did get Clover with Mojave once but stuck with High Sierra with my GTX960 video card...
       
      Attached is the kernel panic and my EFI setup if anyone can help me troubleshoot.
      Many thanks
      D.
       

      EFI.zip
    • By n.d.k
      After several weeks of testing OC bootloader,  disecting its source code and also Clover's source code as well, I finally switch from Clover to OC as my main bootloader. Wait! don't get the wrong idea that OpenCore is better than Clover. They both work equally well, producing a bootable macOS as an end result with simliar boot time. OC design direction is different with Clover, I believe it's not intended as a Clover replacement, but more narrowing down to macOS specifically. However, macOS is not the only OS that i am using, so, i decided to add some minimal necessary source code modification to the OC to get some of the features I need. I like to share my customized OC forked https://github.com/n-d-k/OpenCorePkg , you have to compile it yourself if you want, i will not provide pre build binary.    
       
      Additional features/changes:
      ============
       
      [ Multi-Boot ]
        - ACPI patches are optional for non macOS with setting ACPI->Quirks->EnableForAll to yes (default is no).
        - Booter Quirtks, SMBIOS and Device Properties patches will only applied to macOS.
          
      [ Hotkeys ]
        - Full functional Hotkeys [1-9] corresponding to Boot Entry's Index number and dedicated W (Windows) / X (macOS) keys can be used without seeing Boot Picker.
        - While in boot picker, F10 can use to take a snapshot of the screen.
                
      [ Ui Boot Picker ]
        - Bios Date/time, auto boot to the same OS or manual set to always boot one OS mode, and OC version are displayed in boot picker.
        - Auto boot to previous booted OS (if Misc->Security->AllowSetDefault is NO/false).
        - macOS Recovery/Tools Entries are hidden by default, use Spacebar in Boot Menu as a toggle on/off to show/hide hidden entries.
                
      [ Custom Entries ]
         - Custom entries are now listed first in picker menu and by the orders they are appeared in Misc->Boot->Entries, before all other entries.
         - Ability to change entry name found by auto scanner by adding custom entry with the exact same device path,
           this will give users the option to complete change how all boot entries listed in Boot Picker.
          
      [ Others ]
         - No verbose apfs.efi driver loading (if using apfs.efi instead of ApfsDriverLoader.efi).
          - ndk-macbuild.tool script are set to compile with latest edk2 (One can easily set to stable edk2 if prefer).
          - NvmExpressDxe driver build script are also available for system without native nvme support. (Compatible with OC and Clover).
       
      Usage:
       - To build OpenCore, run "./ndk-macbuild.tool" at Terminal (require Xcode and Xcode Command Line Tool installed, and open xcode to accept license agreement before compiling).
       - To build NvmExpressDxe driver, run "./buildnvme.sh".
       
      4k screen resolutions

       
       

       
      Customized by @btwise

       
       
       
    • By Krani93
      Hi guys,
       
      I'm trying to install Catalina on a Lenovo m720q (i5-8600T with B360).
      After some other issues I'm know stuck at attached screen.
      Im using latest opencore version and have my EFI folder attached.
       
      Can someone help me I've got no clue what to try next :/ 
       
       
      Cheers!

      EFI.7z
×