Jump to content
About Just Joined group Read more... ×

6,427 posts in this topic

Recommended Posts

22 hours ago, LAbyOne said:

git clone https://github.com/acidanthera/audk UDK
cd UDK
source edksetup.sh
make -C BaseTools

build -a X64 -b RELEASE -t XCODE5 -p MdeModulePkg/MdeModulePkg.dsc -m MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf || exit 1

# or Debug

build -a X64 -b DEBUG -t XCODE5 -p MdeModulePkg/MdeModulePkg.dsc -m MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf || exit 1


 

Perfect, thanks! 

22 hours ago, LAbyOne said:

git clone https://github.com/acidanthera/audk UDK
cd UDK
source edksetup.sh
make -C BaseTools

build -a X64 -b RELEASE -t XCODE5 -p MdeModulePkg/MdeModulePkg.dsc -m MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf || exit 1

# or Debug

build -a X64 -b DEBUG -t XCODE5 -p MdeModulePkg/MdeModulePkg.dsc -m MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf || exit 1


 

Perfect, thanks! 

Share this post


Link to post
Share on other sites
Advertisement
13 hours ago, NorthAmTrans said:

 

Sure!

 

For starters here's what I looked for. In IOReg under SATA (or SAT0 if no name change) you see "name" and mine was "pci8086,a282" so I dug through whatever SATA Unsupported I could find until I found one with IOname matches.

SATA-unsupported.kext.zip

 

 

Thanks!  I'll look into it.

Share this post


Link to post
Share on other sites

Hi - I've been trying to boot macOS Catalina on a new Lenovo X1 Carbon 7 which has a new Comet Lake i7-10710u. I see in ProcessorInfo.h that we don't have this processor defined yet. I wonder if this could contribute to the boot issue. Hoping this can help the devs add Comet Lake support.

 

After I select to boot the macOS installer, it performs kext injection but hangs here and does not proceed:

78:816 00:112 Prelinked status - Success

 

Attached is my debug log file (with full verbose logging) and here is the CPU info:

Signature A0660 Stepping 0 Model A6 Family 6 Type 0 ExtModel A ExtFamily 0

So i7-10710u Comet Lake is model 0xA6.

opencore-2020-01-04-014053.txt

Share this post


Link to post
Share on other sites
Posted (edited)

Can anyone help me? New to OpenCore.

 

Specs:

Dell 7567

i7 7700HQ

16GB RAM

Intel HD 630 + GTX 1050Ti

 

Followed the OpenCore vanilla guide and tried to boot with minimal setup. I can't see any options to select in OpenCore menu.

EFI.zip

82304809_2700475370032002_1083988331773034496_n.jpg

Edited by Nihhaar
Added specs

Share this post


Link to post
Share on other sites
Posted (edited)
13 hours ago, Nihhaar said:

Can anyone help me? New to OpenCore.

 

Specs:

Dell 7567

i7 7700HQ

16GB RAM

Intel HD 630 + GTX 1050Ti

 

Followed the OpenCore vanilla guide and tried to boot with minimal setup. I can't see any options to select in OpenCore menu.

EFI.zip

82304809_2700475370032002_1083988331773034496_n.jpg

try to put on your config scanpolicy=0

 

Edited by fabiosun

Share this post


Link to post
Share on other sites
Posted (edited)

Hi

So i also can now boot into recovery, after a lot of trial and error.

The following problem I have still with booting into recovery.

When I remove the -v boot flag, I get a black screen once boot is completed.

When I boot with -v into recovery, display is fine once boot is completed.

 

The only thing that seems to help is adding "agpmod=pikera"

But then booting into to OSX produces a funny login-screen resolution.

What could be the reason for black screen in recovery?

It happens as soon as a remove verbose mode flag from boot arguments.

 

Edit:

I am not sure if this is OC related or Whatevergreen related, or a combination of the settings I use in OC and using WG.

 

Thanks, Mike

 

Edited by Mike Ranger

Share this post


Link to post
Share on other sites
Posted (edited)
24 minutes ago, fabiosun said:

try to put on your config scanpolicy=0

 

Thank you, it worked!

 

It seems like opencore team deliberately put wrong defaults so that users will read the configuration?

Edited by Nihhaar

Share this post


Link to post
Share on other sites
Posted (edited)
24 minutes ago, Nihhaar said:

Thank you, it worked!

 

It seems like opencore team deliberately put wrong defaults so that users will read the configuration?

Default config are not wrong as are not working for all

Their goal I think is help people to learn and thinking :)

 

Edited by fabiosun
typo

Share this post


Link to post
Share on other sites
32 minutes ago, Nihhaar said:

It seems like opencore team deliberately put wrong defaults so that users will read the configuration?

If you would *actually* read the PDF instead of just talking about being made, you would know why this is the default.

Share this post


Link to post
Share on other sites
Posted (edited)

I am trying to do a serial kernel debug with an USB serial port adapter connected via cable to a Windows 64 bit pc and using on it terminal app (https://sites.google.com/site/terminalbpp/) and CoolTerm (https://freeware.the-meiers.org/)

My goal is to have some useful data to share to devs/coder with some interst on AMD trx40 new platform

using opencore debug 0.53 and boot arg flag debug=0x11448

I can't see any printed value or useful info in log

Any advice about it?

 

Edited by fabiosun

Share this post


Link to post
Share on other sites
10 hours ago, fabiosun said:

I am trying to do a serial kernel debug with an USB serial port adapter connected via cable to a Windows 64 bit pc and using on it terminal app (https://sites.google.com/site/terminalbpp/) and CoolTerm (https://freeware.the-meiers.org/)

My goal is to have some useful data to share to devs/coder with some interst on AMD trx40 new platform

using opencore debug 0.53 and boot arg flag debug=0x11448

I can't see any printed value or useful info in log

Any advice about it?

 

 

But for USB serial port adapter need driver.

Share this post


Link to post
Share on other sites
3 hours ago, Andrey1970 said:

 

But for USB serial port adapter need driver.

You mean a driver for opencore bootloader?

in windows i have it

for opencore no

 

Share this post


Link to post
Share on other sites

I have another question regarding Quirks that are built into OpenCore

 

Currently for my system to boot, I need at least:

Comment         String  <-> 5960XPatch 10.14 by PMHeart
Disabled        Boolean <-> No
Find            Data<-> 483D0000 0040
InfoPlistPatch  Boolean <-> No
MatchOS         String <-> 10.14.x,10.15.x
Name            String<-> IOPCIFamily
Replace         Data<-> 483D0000 0080

and 

Comment    String  <-> _xcpm_pkg_scope_msrs by JamesK
Disabled   Boolean <-> No
Find       Data<-> 31D2E879 FDFFFF
MatchOS    String <-> 10.15.x
Replace    Data<-> 31D29090 909090

In Clover, both are not needed if the XCPMKernel Flag is selected. Without, the system will not boot.

 

Is this functionality covered in OpenCore as well through a quirk?

Thanks, Mike

 

 

Share this post


Link to post
Share on other sites

Is it possible to disable XCPM in opencore for Skylake cpu ? I’m asking this because in clover i had FakeCpuId 0x0306a0 and NullCpuPowerManagement.kext so that HWP could work without XCPM. In opencore, I tried to set emulate CpuIdData A0060300 and CpuIdMask FFFFFFFF but boot fails with that settings.

Share this post


Link to post
Share on other sites
7 hours ago, fabiosun said:

You mean a driver for opencore bootloader?

in windows i have it

for opencore no

 

 

On the side OpenCore you have the real serial port?

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, Andrey1970 said:

 

On the side OpenCore you have the real serial port?

no
logilink usb to serial adapter
my trx40 motherboard and many Others do not have real serial port

 

Edited by fabiosun

Share this post


Link to post
Share on other sites
Posted (edited)

I am asking because i do not know
A pci express serial card could be seen by default?

Otherwise no serial debug is possible for normal user on many TRX40 motherboard

 

Edited by fabiosun

Share this post


Link to post
Share on other sites

thank you

Have you others advices for this task?

i am asking because in opencore pdf configuration there is a section where serial port debugging is discussed

 

Share this post


Link to post
Share on other sites

My goal was to understand if it is a problem of kernel Patches available at this moment or a bootloader problem, in a previous message you were talking about a serial debug so i started from there with limited knowdlege

thank you agai for your advice

 

Share this post


Link to post
Share on other sites
Posted (edited)

yeah, you serial debug XNU to retrieve the KP log, but that is not related to OC

EDIT: You could also try to mod the kernel to dump thr KP to NVRAM, but yet again I cannot help you with that and it is offtopic

Edited by Download-Fritz

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By amirali mahmoudi
      hi
      i have a problem since updated my opencore to 0.6.2
      My audio output is set to headphones, and every time i turn on the pc , i need set this on internal speakers
      and the other problem is that sometimes my hackintosh wake up from sleep after 2 second and sometimes its work fine
      i've checked my config.plist in sanity checker and dortania and its all good but these problems still exist 
      Can you help me out please ?
       
      asus z390 p 
      i7 9700k
      rx 590 8gb
      wifi/bt/handoff works fine
      catalina 10.15.7
      opencore 0.6.2
    • By VortexisTV
      Hi, I made sure I got the right kexts and bios settings for my system, and followed every step I could take on Dortania's opencore github guide but I was met with kernel panic. I sanity checked my config.plist and made sure I had the exact settings for my Whiskey Lake laptop. I've dumped my DDST and generated SSDTs using the SSDTTime method, except XOSI (I tried manually recompiling the GPIO SSDT but I also got the same kernel error). I made sure I deleted unnecessary kexts and ACPIs. I'm thinking that my Zenbook laptop has a specific way of handling Hackintosh. If anyone could take a look into my EFI folder and find what's causing them It would be greatly appreciated.
       
      EFI and kernel panic picture is attached below
       
      ASUS Zenbook UX331FN
      i5-8265U
      Intel UHD Graphics 620
      8GB of SDDR4
      Opencore 0.6.2
      Kernel_Panic.zip

    • By dadamaja
      Hi all!!
       
      After using my old Dell Clover convert for a few years, I recently built a new Catalina box using OpenCore.  Everything works perfectly and has been very stable.  The only thing that is not working is unlocking with my Apple Watch.  The screen says "Unlocking with Apple Watch" with the spinning graphic and then just prompts for my password.  It does not shake or anything as if the password is incorrect.  My 2014 MBP unlocks without issue and they both use the same iCloud account.  I purchased the Fenvi FV-T919 pci-e adapter and BT, WIFI, Handoff, and Airdrop are all working without issue.  I confirmed in system preferences that unlock is supported and made sure that automatic login is disabled in my profile.  I have cleared keys out of the keystore, restarted a number of times, logged out and back into iCloud all to no avail.  Anyone else having this issue?  Thanks in advance!!
       
      More info my build:
      Asus PRIME z370-A II
      Core i7 9700K
      32 GB PC3200 Crucial Ballistix RAM
      Sapphire Pulse RX380 
      Samsung 970 Evo Plus
      Fenvi FV-T919
      2x Seagate Barracuda 4TB
      CoolerMaster MasterLiquid ML240L V2
       
    • By rvilbert
      Hi all,
       
      I have been trying to install Big sur on Opencore and i believe i'm almost there but i get stuck on a grey screen with my mouse pointer just before i can see the installer screen.
      I have applied the various SSDT patches for X99. I thought that was linked to VirtualSMC which I replaced by FakeSMC but same issue. I also declared my graphic card in config.plist as i thought it could come from there but that's not the issue (Radeon RX 570).
      I have been scratching my head for some time now. Any idea from anyone please.
       
      I have attached my EFI folder and my ioreg extract. Let me know if you need anything else.
       
      Thanks a million.
       
      My config:
      Asus X99 Deluxe
      Core-i7 5960x
      Radeon RX 570
       
      @RemB
      @jmacie
      I would appreciate your help please. Any views of what could be wrong? Thanks a lot
       
      OpenCore 0.6.2 for X99 BIG SUR.zip
      X99 iMac Pro.ioreg.zip
    • By chris1111
      Here my theme of OC 

      How to create are own Theme with Icnspack-Builder
       

       
      You can Download the themes with ➤ Themes Downloader
      You can also have the themes on ➤ Github
      You can also have the themes on ➤ HTML Page
       
×