Jump to content
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VMware Workstation on a Windows Host
       
      I wanted to make a simple guide on how to create a vanilla OS X El Capitan virtual machine running on a Windows host.  The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are many guides and videos on the net about running OS X on Windows machines using pre-made VMWare disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from various threads in the Multibooting and Virtualisation section of this forum eg
       
      Workstation 11/12, Player 7/12, Fusion 7/8 and ESXi 6 Mac OS X Unlocker 2 by @Donk How to Install OS X 10.x from Snow Leopard to El Capitan in VMware Workstation 10/12, Player 6/8 or ESXi 5/6 by @MSOK HOW TO: Create a bootable El Capitan ISO for VMware Credit and thanks to @Donk, @Albert Nietsnie and @MSOK for all their hard work in creating and testing the VMware Unlocker program.
       
      Requirements
      Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X) 4GB or more RAM (2GB or more will be needed for OS X) Hard Disk with at least 40GB free for Virtual Machine VMware Workstation 12 or later VMware Unlocker 2.0.7 or later Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#41 16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Unmount any attached install image/InstallESD.dmg (if currently mounted) by rebooting the system or running the hdiutil unmount command in terminal eg
       
      3.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes….
       
       
       
      4.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 5.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
      Updates:
      @shela has created an ISO generating script compatible with OS X 10.6-10.12: create_osx_iso post #362.
      See post#30 for macOS_iso_cim.tool script to create ISO for macOS 10.13+ using Apple's createinstallmedia utility.
       
      Install and Patch VMware Workstation 12 on your PC
      1.  Download and install VMWare Workstation Player 12 or later
      2.  Download and extract Unlocker 2.0.7 or later to your USB stick…
      3.  Run the win-install.cmd as administrator by right clicking the file in Windows explorer or run it from an Administrative Command Prompt.
       



       
      Create an El Capitan Virtual Machine
      1.  Double click on the VMware Workstation 12 Player icon on your desktop and click “Create a New Virtual Machine”.  Choose “I will install the operating system later” at the How will you install screen….
       

      2.  Select Apple Mac OS X as the Guest operating system and OS X 10.11 as the version.  By default, an OS X 10.11 folder will be created in your Documents\Virtual Machines folder.
       


      3.  Under Specify Disk Capacity, you can leave the default 40GB or set a larger value.  I personally store the virtual disk as a single file.  Click Finish and you will see OS X 10.11 on the Main Screen of Workstation 12.
       


      4.  Next, we need to edit the virtual machine settings to map the virtual SATA CD/DVD drive to the El Capitan installation iso we created earlier.
       


       
      5.  To prevent the virtual machine from crashing in Windows, the virtualHW.version set in the vmx configuration file needs to be changed from 12 to 10 (alternatively, the line smc.version = "0" can be added to the file).  The OS X 10.11.vmx file can be edited with the WordPad program (navigate to the OS X 10.11 virtual machine folder with Windows Explorer and right click on the file to open in WordPad).
       


       
      6.  For HW10, set USB compatibility to USB 2.0, otherwise your mouse and keyboard might not work in the virtual machine.
       

      7.  Finally click “Play virtual machine”
       

      Installation of El Capitan
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I’ve named the drive Macintosh HD but you can enter whatever you like eg El_Capitan.
       



      3.  Quit DU and choose Macintosh HD to install El Capitan on.
       

      4.  After 20-30 min (depending on how fast your system is), the installation will complete and the VM will automatically reboot…
       

      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
       


      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
       


      7.  Finally, you will arrive at the El Capitan Desktop.  You should eject the Installation iso now by right clicking and selecting “Eject OS X Base System”.  This will allow you to install VMware Tools….
       



      8.  After rebooting, the VM can now be resized or run at full screen resolution.  Audio and network/internet should also work OOB.
       

       
      SMBIOS Customization and iMessage Vars
      To make the Virtual Machine more "Mac like", you can edit the vmx file to add unique identifiers from a real Mac's SMBIOS -
      eg for an iMac 11,3 SMBIOS, you can enter the following lines....
      smbios.reflectHost = "FALSE" board-id.reflectHost = "FALSE" board-id = "Mac-F2238BAE" hw.model.reflectHost = "FALSE" hw.model = "iMac11,3" serialNumber.reflectHost = "FALSE" serialNumber = "W80#######6" Refer How to spoof real Mac in VMware - Multi-booting and Virtualisation.
       
      The critical variables for iMessage/Facetime activation are MLB & ROM.  By default, VMware "reflects" the host's MLB and ROM since it assumes you are running the OSX guest on a real Mac host - see post#42 by @Donk.
       
      If the host is a Windows PC, the following lines need to be added to the vmx file (requires virtualHW.version 12 and smc.version = "0")....
      efi.nvram.var.ROM.reflectHost = "FALSE" efi.nvram.var.MLB.reflectHost = "FALSE" system-id.enable = "TRUE" and the MLB, ROM and optionally system-id entered manually eg
      efi.nvram.var.MLB = "W80######BA1A" (MLB can be 13 or 17 characters long, alphanumeric string) efi.nvram.var.ROM = "<=>?@A" (ROM is entered here as a 6 character ASCII string) uuid.bios = "## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##" <---Optional (if you want to inject a given system-id hexadecimal value) Note the output for ROM from imessage_debug is a 12 character hexadecimal that needs to be entered here as a 6 character ASCII string eg using an Hex to ASCII converter we find that "3c3d3e3f4041" hex is equivalent to   "<=>?@A".
       
      Vanilla Mavericks and Yosemite
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Enjoy
       
      Update for macOS 10.12 Sierra
      The above settings still work for macOS Sierra after upgrading to VMware Workstation 12.5 and unlocker 2.0.8 - see post #13.
       
      Update for macOS 10.13 High Sierra and 10.14 Mojave
      See post#30 for macOS_iso_cim.tool script to create ISO for macOS using Apple's createinstallmedia utility.
      Post#41 describes how to build "Install macOS ******.app" on the fly from installer files downloaded beforehand in /SharedSupport folder.
       
      Update for macOS 10.15beta Catalina
      See post Update for macOS Catalina 10.15beta
       
      CECI.zip
      CYI.tool.zip
      CMI.tool.zip
    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       

       
       
       
      **FOR**  GIGABYTE Z390 AORUS PRO
       
       
       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
      Hackintosh Vanilla Desktop Guide
      /r/Hackintosh - corpnewt
       
       
      MONITORCONTROL
      JoniVR & theOneyouseek
       
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
      UPDATES
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB ( connected to monitor with DisplayPort )
       
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16  In this build, both memory modules are installed in memory slots DDR4_A1  and DDR4_B1 
       
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  
      OR
      • WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
      ** Avoid Samsung EVO 970 PLUS as Hackintosh has problem with that device **
       
       
      WORKING
       
      • Sound 
      • HDMI Port on AMD RX580 / 590 ( Ensure you disable BIOS CSM if using HDMI on RX580 / RX590 )
      • HDMI Port on Aorus Z390 Motherboard ( Ensure you have correct BIOS settings as per this guide for Intel only)
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Handoff
      • Continuity
       

       

       
       
       

       
       
       
       
       
      PREAMBLE - BEFORE YOU START 
       
      Here detailed, is all the  steps towards building a successful and stable Aorus Pro Z390 Hackintosh, if you are a first time Hackintosher, this guide will have you quickly up and running with the Aorus Pro Z390 Hackintosh. To rule out any problems from the go,
      only have the disc that you plan to install macOS Mojave connected to the Aorus Pro, disconnect any other Windows / Linux or data drives, external drives from your Aorus Pro. Windows / Linux and data drives can be connected after successful installation of macOS Mojave
      If you have more than 16 GB of memory, then install macOS Mojave with just 16GB, you can later add any additional memory. Install memory modules in slots DDR4_A1  and DDR4_B1. This build has the Wi-Fi combo PCI-e card installed in slot PCIEX1_3
      with its 9 pin USB cable attached to motherboard header F_USB2. 
       
      If using the Corsair H100i v2 AIO cooler with USB cable connected to motherboard header F_USB1, you will need to enable hot-patch ( explained in guide ) in config.plist for working sleep, wake from sleep will only work by pressing Power Button.
      However, If not using the Corsair H100i v2  USB cable, then you have wake from sleep using Keyboard / Mouse or Power Button.
      The Corsair USB cable is only required if using Corsair Link software in Windows for custom Fan or LED settings.
       
      Install macOS Mojave on its own physical drive, so do not try and install macOS Mojave onto a free partition on a disc that contains Windows.
      Remove any Thunderbolt cards, Thunderbolt card can be reinserted after installation.  Double check your BIOS settings are the same as this guide. 
       
       
      AMD Vega card's  will work with this guide, but If you plan to use a Sapphire Pulse Vega 56 then please read @AudioGod ==>post  regarding the Sapphire Pulse 56.
       
       
       
      Following are unsupported / problematic
       
      • Intel Optane ( if you have this, remove it before installation of macOS Mojave )
       
      • Samsung EVO Plus drives ( firmware problem with macOS )
       
      • XFX Radeon RX 580
       
      • NVIDIA GTX / RTX not supported in macOS Mojave
       
      • Fenvi T919 Wireless Card, it seems Bluetooth is not working out of box for some users ( Maybe the USB port attached to Fenvi bluetooth is wrongly configured, or the SSDT-UIAC.aml port connector was not configured as Internal, or maybe some other reason )
         Save yourself a headache --->  RECOMMENDED WIFI CARD WORKING OUT OF BOX (OOB)  is ---> ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS 
       
       
       
      Q - WILL THIS GUIDE WORK WITH MY NON AORUS Z390 PRO MOTHERBOARD ?
      A - Possibly may work with other Z390 chipset motherboards. See very bottom of page for PRE & POST - INSTALL AORUS X 390 EFI's ( will require USB SSDT fix  )
       
      Q - I notice you have the Aorus Pro Z390 version, will this guide work with Aorus Pro Z390 WiFi version ?
      A - Yes, but onboard Intel / Intel CNVi WIFII /Bluetooth will not work with macOS and you will have to disable HS14 for Bluetooth to function properly on BCM943602CS or BCM94331CD WiFi/Bluetooth Combo cards ( more info at bottom of guide) .
       
       
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      Download the following:
       
      • CLOVER
       
      • PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
       
      •  POST-INSTALL Aorus Pro Z390 EFI - RX580.zip
       
       
      //OPENCORE EXPERIMENTAL EFI FOR RX580==> EFI.zip
       
       
       
       
       
       
      // INTEL UHD 630 EFI  Aorus Pro Z390 EFI's below. For those who do not have a Graphics Card Installed in PCIe Slot, requires Initial Display Output BIOS setting to be changed to IGFX  spoiler below!
       
      •  PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
      •  POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
       
       
       
       
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder as will cause intermittent memory allocation errors on boot, explained in guide)
       
       
      OPTIONAL DOWNLOADS
       
      • Native Display Brightness with MonitorControl
       
      • VoodooHDA.kext.zip 

      • ThemeEngine 
       
      • Assets.car 
       
       
      // Not really needed but IF no sound on Wake from Sleep then use SSDT-ALC1220 and CodecCommander
      • SSDT-ALC1220.aml  ( Resolves Audio Sound on Wake, place in Clover / ACPI / Patched )
       
      • CodecCommander.kext.zip ( Resolves Audio Sound on Wake, place in Clover / Kexts / Other )
       
       
       
       
      PART 2 - BIOS SETTINGS (version F9 )
       
       
      Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Disabled
      • Chipset → Internal Graphics → Enabled
      • Chipset → DVMT Pre-Allocated → 256M
      • Chipset → DVMT Total Gfx Mem → MAX 
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Disabled ( Change to enabled after macOS is installed )
      • Power → ErP → Disabled  ( Can be enabled if you have RGB lighting that you want to power off when shutting down Hackintosh. Thanks @AudioGod for flagging this up)
      • Power → RC6 (Render Standby) → Disabled
       
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Disabled
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customise button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip  OR  if NO graphics card installed in PCIe slot, then use PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip( Video below ) 
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
       
      INSTALL NOTE
       
      ENSURE BIOS: Above 4G Decoding is set to Disabled 
      if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
       
      Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts. 

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
       Here is a walkthrough of the full process using the macOS Mojave USB Installer on the Aorus Z390 Pro. 
       
       
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      At next restart, press F12 and boot from external UEFI USB device and choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
      To boot from the internal system drive without the installer: 
       
      Download and install Clover with RC Scripts on target volume.  
      If your Aorus Pro Z390 has AMD RX 580 then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - RX580.zip  folder and paste it inside the the System Drive EFI partition.          OR
      If your Aorus Pro Z390 has no graphics card installed in PCIe slot, then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip  folder and paste it inside the the System Drive EFI partition.   
       

       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      // UPDATE 21st MAY 2019
       
      Possibly Clover Configurator now automatically populates correct values for working iMessages when you select an SMBIOS.  
       

       
      After selecting SMBIOS, example iMac19,1 for Aorus Pro with RX580 ( image above ) then go to Apple and ensure you have the "serial number is not valid " message. Done!
       
      If you still have problems connecting to iMessage, test and ensure that AirDrop is working, then follow instructions inside spoiler. 

       
       
      • Mount internal drive EFI/ESP partition
      • Go to folder CLOVER → drivers64UEFI 
      • Place both EMUVariableUefi-64.efi inside → drivers64UEFI
       
       
      Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
       
      • Slide = 0
       

       
       
      Shutdown and then press power on button on PC.
       
      • You should now be able to Log into iCloud, iMessages and FaceTime
       
       
       
      • NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder 
      • Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
       
       
      // UPDATE 22nd May 2019 
       
      • It seems that there are no "Couldn't allocate runtime area"  errors when continuing to use EMUVariableUefi-64.efi since updating to macOS Mojave 10.14.5 and using Clover version r4920. 
      • It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area”  post errors.
       
       
       
       
      PART 9 – ENABLE TRIM for Solid State Flash Drives
       
      Open Terminal and enter the following command:
      sudo trimforce enable  
       
       
       
       
      DEFAULT SSDT –  USB PORTS FIX CONFIGURATION WITH FRONT USB-C - SSDT USBPorts.kext ALREADY INSIDE AORUS Z390 EFI FOLDER  – Provided by @AudioGod  
       
       

       

       
      If you have USBC on Computer Chassis / Case, then SS01 and SS02 is mapped to that USB C port 
       

       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
      OPTIONAL: Set Wi-Fi Country Code
       
       
       
       
       
       
      OPTIONAL: System Information - PCI
       
       
       
       
       
       
       
      External USB Storage:  Fix "disk did not eject properly" message upon wake from sleep
       
       
       
       
       
       
       
      OPTIONAL:  Native Display Brightness - with MonitorControl

       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       

       
       
       
       
      OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
       
       
       
       
       
      FRAMEBUFFER PATCHING  – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro
       


       
       
       
       
       
       
      FINAL CUT PRO  – Configuration for AMD RX5xx 
       
       
       
       
      AORUS PRO Z390 WIFI version with Intel CNVi  – Disable Bluetooth on HS14
       
      Resolve bluetooth issue  reported by @eSaF 
       
       
       
       
       
       
      CLOVER  – Updating / Upgrade Clover boot loader 
       
       
       
       
       
       
      SLEEP  – Sleep and Automatic Sleep

       
       
       
       
       
       
       
       
      SLEEP  – Resolving Instant Wake ( Corsair H100i v2 AIO )
       
       
       
       
       
       
       
       
      WIFI  – Clover Hotpatch PXSX to ARPT
       
       
       
       
       
       
       
       
       
       
      RECOMMENDED READING  – Excellent Hackintosh Vanilla guide created by CorpNewt with in depth tutorial on Clover.  
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake
       
       
       
       
       
       
       
       
       
      AORUS Z390 MOTHERBOARD X  – EFI WITH NO USB SSDT, WITH PORTS LIMIT PATCH, WITH SSDT-GPRW SLEEP / WAKE FIX
       
      Q - I notice you have the Aorus Pro Z390 version, will this guide work with other Gigabyte Aorus Z390  motherboards ?
      A - Possibly, but it is not guaranteed that these EFI folders below may work. 
       
       
      PRE-INSTALL Aorus X Z390 EFI - RX580.zip
      POST-INSTALL Aorus X Z390 EFI - RX580.zip
       
      PRE-INSTALL Aorus X Z390 EFI - Intel UHD630.zip
      POST-INSTALL Aorus X Z390 EFI - Intel UHD630.zip
       
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      SSDT-UIAC.aml.zip
      SSDT-UIAC.dsl.zip
       
      CodecCommander.kext.zip
      SSDT-ALC1220.aml.zip
       
      POST-INSTALL Aorus Pro Z390 EFI - RX580 2.zip
    • By ThatsMatt
      Salve, sono nuovo nel forum e mi serviva una mano nell'installazione dell' ultima versione di MacOs sul mio notebook HP Pavilion 15-ak112nl.
      Specifiche Tecniche: 
      CPU: Intel Core i7-6700HQ (2.60 / 3.50 GHz, 4 core, 6 MB CACHE L3). 
      Scheda Grafica: Intel HD Graphics 530 + NVIDIA GeForce GTX 950M 4 GB DDR3.
      Hard Disk: 1 TB SATA 5400 rpm.
      Ram: 8 GB DDR3L-1600.
      Audio: altoparlanti stereo Bang & Olufsen PLAY. 
      Rete: LAN 10/100, WLAN 802.11b/g/n, bluetooth 4.0 (Miracast).
      Grazie in Anticipo a chi mi risponderà
    • By crazybirdy
      Patched OSInstaller.framework to allow macOS 10.14 installation on MBR HFS+ partition.
       
      To use those patched files you must follow HowTo to create an USB installer. You can't just run the app downloaded from Mac App Store.
      The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.14 HFS Firmware check by crazybirdy.
       
      What is this patched OSInstaller doing?
      1. Patch the MBR check, allow macOS 10.14 installation on MBR partition.
      2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware".
      3. Patch to stop auto-convert to APFS , "ConvertToAPFS=false" is no longer worked with 10.14.
      4. This patched MBR OSInstaller will never convert to APFS, and will always install as HFS+ partition.
      5. This patched MBR OSInstaller method works with both MBR HFS+ and GPT HFS+ partition (GPT+recovery).
      No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch.
       
      What's the difference between createinstallmedia method, MBR-Manual-Method, and MBR-Automatic-Method?
      As the following....
      1. createinstallmedia method,
          needs stage 1, stage 2 installation process, which is worked with GUID partition only, always convert to APFS format.
      2. MBR-Manual-Method (same as 10.12),
          install via stage 2 manually, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format.
          We can manually format as MBR or GPT, HFS+ or APFS on installation screen like as 10.12.
          We can manually select MBR HFS+ partition to install 10.13 and 10.14 on installation screen now.
          Needn't to update the MBR-Manual-Method files, it will still work on 10.13, and 10.14 future versions, I think so.
          It can be installed as Fresh installation on formated blank partition only, but can't be installed as update from previous version.
      3. MBR-Automatic-Method (new for 10.13+),
          install via stage 2 automatically, which is worked with both MBR and GUID, HFS+ and APFS, will never convert the partition format.
          It can be installed as Fresh installation on formated blank partition, and can be installed as update from previous version.

      How to make 10.14 installer for MBR (MBR-Manual-Method)?
      Just use EasyMBR-InstallerMaker to make installer, it works with both MBR and GPT.
      Read HowTo inside the dmg first, same as 10.12.
      Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave?
      Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly?
       
      How to make 10.14 installer for MBR (MBR-Automatic-Method)?
      Just use 14MBRinstallerMaker to make installer, it works with both MBR and GPT.
      Read HowTo inside the dmg first, same as 10.13.
      Read HowTo Q/A Q5. How to patch to work with CPU SSE4.1 only for Mojave?
      Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      Read HowTo Q/A Q7. How to update 10.14.x combo-update to MBR and GPT with installScript directly?
       
      And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
       


       
      Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      A6. Some people download installer app from App Store, and get only 18 MB size, not the complete installer app (5.68 GB). You should boot to 10.12, or 10.13 to download it again from App Store, or use script Q6-DownloadFullApp/installScript_1014fullapp to download the full installer app via swscan.apple.com.
       

       
×