Jump to content
5kr1p7

Troubles with Mojave on AMD FX

1 post in this topic

Recommended Posts

Just installed Mojave 10.14.1 (guided by the Shaneee tutorial) and faced a number of problems:

 

  1. Annoying USB related errors loop when system boot (if anyone got this just wait longer). Entering commands in single user mode commands was really challenging with screen full of errors
  2. Reboot/shutdown doesn't work (after lines in console just black screen. Need to push reset/power button)
  3. Computer doesn't wake up after sleep
  4. Browser are crashing on some web pages (Safari and Chrome on same pages (can't login on rutracker.org for example))

 

USB error:

...
2019-04-02 23:52:57.982767+0300 0x1adc     Default     0x0                  0      0    kernel: (AppleUSBEHCI) 000122.778171 UHC4@53000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010030 USBSTS 0x00004008
2019-04-02 23:52:57.982779+0300 0x1ad3     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.778184 UHC6@56000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010
2019-04-02 23:52:57.985297+0300 0x1ad3     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.780706 UHC6@56000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-04-02 23:52:57.985320+0300 0x1ad3     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.780730 UHC6@56000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000008
2019-04-02 23:52:57.985339+0300 0x1ad3     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.780750 UHC6@56000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-04-02 23:52:58.021308+0300 0x1ad1     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.816718 UHC2@52000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010
2019-04-02 23:52:58.023653+0300 0x1ad1     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.819066 UHC2@52000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-04-02 23:52:58.023664+0300 0x1ad1     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.819078 UHC2@52000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000008
2019-04-02 23:52:58.023673+0300 0x1ad1     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.819087 UHC2@52000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-04-02 23:52:58.088634+0300 0x1ad7     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.884043 UHC4@53000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000010
2019-04-02 23:52:58.091464+0300 0x1ad7     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.886874 UHC4@53000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-04-02 23:52:58.091481+0300 0x1ad7     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.886893 UHC4@53000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000008
2019-04-02 23:52:58.091495+0300 0x1ad7     Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000122.886909 UHC4@53000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2019-04-02 23:52:58.092790+0300 0x1ad8     Default     0x0                  0      0    kernel: (AppleUSBEHCI) 000122.888199 UHC6@56000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010030 USBSTS 0x00004008
2019-04-02 23:52:58.131032+0300 0x1ae4     Default     0x0                  0      0    kernel: (AppleUSBEHCI) 000122.926440 UHC2@52000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010030 USBSTS 0x00004008
2019-04-02 23:52:58.196398+0300 0x1ae9     Default     0x0                  0      0    kernel: (AppleUSBEHCI) 000122.991807 UHC4@53000000: AppleUSBEHCI::StopUSBBus: USBSTS.HCHalted did not set as expected: USBCMD 0x00010030 USBSTS 0x00004008
...

 

Can anyone who fixed theese issues share kexts archive, config.plist, kernel newer than the manual? My PC specs in signature.

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly except for sleep.  I'm starting this thread hoping to help others install Mojave on their E6410s and to diagnose and resolve the sleep issue.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread (Many thanks, @duduclx !!!) and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.5 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 5, not the original version) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) MacOS: Mojave 10.14.5 CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)   
      What is NOT working:
      Sleep (display goes blank, but power light stays on.  System cannot wake and must be forced off with power button) Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Display Port Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS) Camera (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: @PlutoDelic) for working external VGA display. Headphone jack  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z  


      CLOVER.zip
    • By fusion71au
      Patch Catalina or Mojave macOS Installer App for Unsupported Machines
       
      Often for economic reasons, Apple prevents the Installer.app for its latest macOS from installing on older machines perfectly capable of running it eg macOS 10.14 Mojave on Unsupported Macs Thread.
       

       
      In Mojave 10.14, @ASentientBot posted a method to patch the distribution file in OSInstall.mpkg to enable the Mojave installer to install on unsupported machines (with or without graphics card metal support). 
       
      In Catalina 10.15beta, the above method no longer works since Apple is checking OSInstall.mpkg for its file signature and the mandatory requirement in Catalina to install to 2 separate apfs volumes necessitates using the original Catalina macOS Base System Installer.  Fortunately, it is still possible to substitute High Sierra’s Apple Signed OSInstall.mpkg inside the Catalina or Mojave InstallESD.dmg by making it R/W.
       
      The procedure below will allow Macs or Hacks able to install High Sierra to also install Catalina or Mojave (eg SMBIOS MacPro5,1, iMac11,3, MacBook Pro7,1 which have been unsupported in macOS 10.14.x and 10.15beta) -credit to @ASentientBot's post.
       
      Prerequisites
      1. Mac or Hack capable of and running High Sierra 10.13.x
      2. An original, untouched copy of OSInstall.mpkg from High Serra InstallESD.dmg - attached OSInstall_10.13.6.mpkg.zip save to your ~/Downloads folder
      3. macOS Installer App eg for Catalina beta or Mojave downloaded to /Applications
      4. Add NVRAM boot arg (or Clover config.plist boot arg on a hack) -no_compat_check to enable system to boot to final completed Mojave or Catalina install.
       
      Procedure
      1. Open Terminal and type the following
       
      open /Applications/Install*/Contents/SharedSupport/InstallESD.dmg (assuming the Catalina or Mojave Installer App is in /Applications)  
      2. Open Disk Utility, click File|New Image|Image from ‘InstallESD”
      3. Save as read/write image, no encryption in /Applications
      4. Unmount InstallESD in DU by clicking the "eject" icon next to it
       
       
      5. Open the R/W InstallSD.dmg in /Applications and replace Catalina’s/Mojave's OSInstall.mpkg with High Sierra’s version by typing in terminal
       
      open /Applications/InstallESD.dmg cp ~/Downloads/OSInstall_10.13.6.mpkg /Volumes/InstallESD/Packages/OSInstall.mpkg  
      6. Unmount InstallESD in DU by clicking the "eject" icon next to it
      7. Replace original Catalina/Mojave InstallESD.dmg with our patched one, making a backup of the original.  In terminal, type
       
      sudo mv /Applications/Install*/Contents/SharedSupport/InstallESD.dmg /Applications/InstallESD_orig.dmg sudo mv /Applications/InstallESD.dmg /Applications/Install*/Contents/SharedSupport/  
      8.  Test the newly patched installer!…

    • By Coddyx
      Hi,
       
      I followed the AMD OSX Vanilla Guide and managed to successfully build my first hackingtosh.
      Everything works great EXCEPT for my MSI - Radeon RX 580 8 GB GAMING X.
      I ran some benchmarks (and tried World of Warcraft) and I am getting ~50% of the performance I am usually getting in Windows 10.
      Unigine Heaven reports ~950 vs 1750 in Windows and World of Warcraft runs @ 30 fps lowest settings vs 60 fps ultra settings in Windows.
       
      Here are the kexts I am using:
      AppleALC Lilu NullCPUPowerManagement RealtekRTL811 VirtualSMC WhateverGreen  
      I should mention that this is an AMD hackingtosh running on Ryzen 5 1600 3.2 GHz 6-Core Processor.
       
      I read and I completely understand that I should not expect 100% performance. But I believe a 50% drop is out of the ordinary.
       
      If anyone has ideas on what I could try to up the performance it would be greatly appreciated.
       
      Thank you!
       
       
×