Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By wowood
      I build a HackMini with GB-BRi5H-8250, follow the https://dortania.github.io guide, everything work fine, except 2 tiny problems.
      hope someone can help me,thanks very much.
       
      system info
      - macOS 10.14.6
      - OpenCore 0.5.9
      - SMBios iMac19,1
       
      problems
      - my device is a desktop, but get a battery tab in Energy Saver.
      - hdmi audio not work after startup. It work fine after I plug and unplug the hdmi cable or toggle the display power button.
       
       

       
       
      OC.zip
    • By danieldbird
      Hi all,
      Wondering if anyone has seen this issue before. My cursor started jumping to a fixed position every say 10 seconds, then all of a sudden just gets stuck in that position and any attempt to move it does nothing and the cursor reverts to the same fixed position. Everything was fine for ages, then this started occurring.

      Here is a short video of it:
      Cursor stuck
       
      Any help or guidance greatly appreciated.
    • By ltooz_audis
      This is the way I patched my DSDT and SSDTs to get perfect sleep/wake and USB ports on my Skylark i7-6600u HD520 HP EliteBook 820 G3.
       
       
      Cheers,
      Louis
    • By nyichiban1
      So I got some new hardware:
      Asus Z490I Gaming ITX
      NZXT H1 Case
      Intel i9-10900
      samsung 970 EVO plus NVME
      SK Hynix 1TB SSD
      32GB G.Skill 3200 C14 Ram
      MSI 5700 XT Evoke
       
      So I got windows installed and wanted to install macOS using opencore. I had no luck getting past the [EB|#LOG:EXITBS:START] error and decided to use someone else's EFI who had the same motherboard minus the CPU and GPU (i7-10700k and Radeon VII). I went ahead with that EFI and voila got it to install and got past the error I had. The issue was after the install there is a reboot and that's where it hangs and give me an error log that I attached. Tried a few more things to see what I could do but was stuck on that error log every single time. Decided to try again today and now I can't get past the original error log. I've looked at the dortania guide for that error and tried everything it suggested but still won't get past the error. Not sure what else to do but to try Clover maybe. Anyone have any suggestions? I've attached my EFI as well. Thanks in advance.
      Installer_Log_8-Jul-2020.txt
      EFI.zip
×