Jump to content

80 posts in this topic

Recommended Posts

---INSTALLATION TUTORIAL---

 

---Original Post---

https://olarila.com/forum/viewtopic.php?f=45&t=9172

 

---USB---

https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/

 

---CLOVER FOLDER---

 

CLOVER.zip

 

 

--MOBO
GigaByte Z390 M Gaming

vLUqUdR.png
YE1efdP.png

--PROCESSOR
Intel Core i9-9900K

QNu6K0R.jpg

--COOLER
CoolerMaster MasterLiquid ML120R RGB

SPuPOTw.jpg

--MEMORY
Corsair Dominator Platinum 16GB (2 x 8GB)

NeLh8Vh.jpg

--GPU
Sapphiretech Radeon RX 590 8 GB GDDR5

nvggQwG.jpg

 

--SSD
Samsung 970 EVO NVMe M2 Flash Drive

jpEdeFU.jpg

--POWER SUPPLY
EVGA 750 N1, 750W

dKUhfbT.jpg

--WIRELESS
TP-Link Archer T9E

n3F7hoM.jpg

--BLUETOOTH
Orico BTA-403

G0ljPNl.jpg

--CASE
Thermaltake View 21 Tempered Glass Edition

jc1HnoK.jpg

--DSDT Patches--

-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM / REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

--SCREENSHOTS--

gLIACW3.png
SG0vfPP.png
drJI1jz.png
0swQKKY.png
BgynKrh.png
t2Ybws6.png
uZYGQ4I.png
kYiGw9m.png
a8aam5e.png
xTRiTnB.png
oGwYI6W.png
HwQkfjm.png
U6i0pkW.png
bF0hDlG.png
XDjHFcd.png
xPnMDDp.png
jONJ9uk.png
GfAvPl2.png
PUoUvhU.png
wM3yVBj.png
BFLb7MN.png
I7VRS7k.png
BkM4bCu.png
e2BDcs2.png
So1UwPJ.png
dAde9y0.png
p2szExD.png
giKv4Ry.png
KuEsArh.png

--BruceX--

 

--USB-C-- test with SanDisk Ultra USB-STICK 128gb
doGHBKh.png
7jCZ16i.png

 

-Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!

We're all here to have fun and learn from each other!

Share this post


Link to post
Share on other sites
Advertisement
2 hours ago, Baio77 said:

Hi Mald0n, since January I have given myself identical configuration except that x CPU, my I7 8700 ......
I leave the OEM folder attached, now I will test yours ....

Thank's

Z390 M GAMING-CF.zip

 

u don't need emuvariable, have a fix in dsdt for it and many others

 

post one full dump, ill edit one good dsdt for u

https://olarila.com/files/Utils/RunMe.app.zip

 

 

 

Share this post


Link to post
Share on other sites
Posted (edited)

I tried using your Clover files, but machine won't boot with it. I've got the board up and running with my Clover. 

Clover 4920

i3-8100

Framebuffer configured

HS03 port is only USB2. Since only 15 ports avail, I disconnected some HS0X ports to meet the requirement. Can't get that HS03 to be USB 3 speeds though using Hackintool app. (I think I still have USBINJECTALL.KEXT in /Other. Should have taken that out.)

2 4920 (Framebuffer,USB - HS03 only usb2, i3-8100).zip

Edited by buzzworm
uploaded clover

Share this post


Link to post
Share on other sites
3 hours ago, buzzworm said:

I tried using your Clover files, but machine won't boot with it. I've got the board up and running with my Clover. 

Clover 4920

i3-8100

Framebuffer configured

HS03 port is only USB2. Since only 15 ports avail, I disconnected some HS0X ports to meet the requirement. Can't get that HS03 to be USB 3 speeds though using Hackintool app. (I think I still have USBINJECTALL.KEXT in /Other. Should have taken that out.)

2 4920 (Framebuffer,USB - HS03 only usb2, i3-8100).zip

post one full dump

--Run_Me
RunMe.app
https://www.youtube.com/watch?v=k9wmIfGLe3A

Share this post


Link to post
Share on other sites
7 hours ago, buzzworm said:

Here you go. 

Send me Z390.zip

1- Replace Full Clover Folder

CLOVER.zip

2- Install Clover again with correct options
Last Clover Version UEFI
La5CMRr.png
3- Reboot
4- Extract original tables with F4 key in Clover boot screen, files generated in Clover/acpi/origin
4- Extract new Send_me

Share this post


Link to post
Share on other sites

FYI this is how I'm going to setup the USB ports. Using the 2 internal USB2 headers and the internal USB3 header.

Screen Shot 2019-04-25 at 8.12.02 AM.png

Share this post


Link to post
Share on other sites
8 hours ago, buzzworm said:

Thanks. Here's the new one. 

Send me Z390 (v2).zip

 

I don't have the BCM94360CD wifi card installed yet. Waiting for the PCIE adapter

 

7 hours ago, buzzworm said:

FYI this is how I'm going to setup the USB ports. Using the 2 internal USB2 headers and the internal USB3 header.

Screen Shot 2019-04-25 at 8.12.02 AM.png

use it for 10.14.4 and 10.14.5

config.plist.zip

Share this post


Link to post
Share on other sites
42 minutes ago, buzzworm said:

thanks. What about that custom DSDT? I don't see that attached.

 

inside clover/acpi/patched, dsdt and ssdt6 for usb, use it with last config.plist

Share this post


Link to post
Share on other sites

I don't understand. You had me press f4 at clover boot screen. Didn't that create those Patched ACPI files? So you just provide a config.plist? Just trying to be clear about it.

Share this post


Link to post
Share on other sites
4 minutes ago, buzzworm said:

I don't understand. You had me press f4 at clover boot screen. Didn't that create those Patched ACPI files? So you just provide a config.plist? Just trying to be clear about it.

use it, only it

CLOVER.zip

 

i need tables with F4 just for check or patch a untouched table, but if u have a good renames in config.plist don't need

 

ur full DSDT i put in clover/acpi/patched

Share this post


Link to post
Share on other sites

I see your changed DSDT file, but are these the only changes you made? Is this because the config.plist is handling the renames? I'm just trying to understand it all.

 

Screen Shot 2019-04-25 at 5.30.34 PM.png

Share this post


Link to post
Share on other sites
28 minutes ago, buzzworm said:

I see your changed DSDT file, but are these the only changes you made? Is this because the config.plist is handling the renames? I'm just trying to understand it all.

 

Screen Shot 2019-04-25 at 5.30.34 PM.png

in previous folder have a full dsdt patched too ;) i just change little things in last clover folder, extract DSDT with F4 key and compare with last DSDT edited

 

renames in config.plist is mandatory to avoid conflicts in some OEM SSDT, for example, if we rename HDAS to HDEF in DSDT need rename HDAS to HDEF in SSDT OEM too, Clover rename patches solve it on the fly ;) 

Share this post


Link to post
Share on other sites
Quote

in previous folder have a full dsdt patched too ;) i just change little things in last clover folder

 

I never got a previous folder. You sent only 1 full clover.zip. The comparison was based off of the that, which is the original DSDT from pressing f4 and then your patched DSDT. The only changes I see are you changing AMI to GLORILA. That's the only change. Are you sure you sent me the right DSDT file? Feels like there should be a lot more changes based off of your list of DSDT fixes.

 

-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM / REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

 

Share this post


Link to post
Share on other sites
1 minute ago, buzzworm said:

 

I never got a previous folder. You sent only 1 full clover.zip. The comparison was based off of the that, which is the original DSDT from pressing f4 and then your patched DSDT. The only changes I see are you changing AMI to GLORILA. That's the only change. Are you sure you sent me the right DSDT file? Feels like there should be a lot more changes based off of your list of DSDT fixes.

 


-FIX ERRORS AND WARNINGS
-FIX ACPI ERRORS
-REMOVE UNUSED SCOPES / DEVICES
-HIGH PRECISION EVENT TIMER
-SATA SERIE 10 ID
-DMAC
-REMOVE 22K LINES, PROBLEMATIC and UNUSED
-FIX K.P in REBOOT
-NVRAM / REAL TIME CLOCK
-SLPB
-DARWIN / WINDOWS 2015
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-REAL TIME CLOCK
-ARTC
-IRQs
-SBUS
-MIKEY
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-UAR1
-LAN
-FWHD
-USBX
-PMCR
-PPMC
-XSPI
-GMM
-IMEI
-EC
-PNLF
-ARPT
-GFX0
-NVME
-DTGP
-ACQUIRE MUT0 0XFFFF
-OPERATION REGION GPIO
-MUTEX MUT0 0x00
-EXTERNAL REFERENCES
-UNKNOWNOBJ
-HDMI / HDAU
-FULL RENAMED DEVICES

 

 

here

first folder have a full dsdt patched too 

Share this post


Link to post
Share on other sites
8 minutes ago, buzzworm said:

this is what's in that clover.zip folder from the link. nothing in ACPI. just empty folders.

 

Screen Shot 2019-04-25 at 6.43.50 PM.png

inside clover/acpi/patched

Captura de Tela 2019-04-25 às 22.52.31.png

and u see all pathes loads in Send me Z390 (v2).zip, essentials, cosmetics

Captura de Tela 2019-04-25 às 22.53.12.png

 

Share this post


Link to post
Share on other sites

I see the patches in PCI. thanks. 

USB2 ports aren't working, tho. USB3 are.

Hackintool doesn't show USB2 devices being plugged in. Only USB3.

 

Before I switched to your Clover folder, I created a 15 port patch. In my old Clover I have ACPI/patched:

SSDT-EC.aml

SSDT-UIAC.aml

SSDT-USBX.aml

 

Should I install those files back, then remove USBInjectall.kext and remove USB port limit patches?

 

 

Share this post


Link to post
Share on other sites
6 hours ago, buzzworm said:

I see the patches in PCI. thanks. 

USB2 ports aren't working, tho. USB3 are.

Hackintool doesn't show USB2 devices being plugged in. Only USB3.

 

Before I switched to your Clover folder, I created a 15 port patch. In my old Clover I have ACPI/patched:

SSDT-EC.aml

SSDT-UIAC.aml

SSDT-USBX.aml

 

Should I install those files back, then remove USBInjectall.kext and remove USB port limit patches?

 

 

use only it, usb work with this clover folder, don't need any ssdt

 

CLOVER.zip

Share this post


Link to post
Share on other sites

All USB ports are working.  So with each 10.14.x update I'll need to update the "USB port limit patch #1 10.14.x modify by DalianSky(credit ydeng)" limits?

 

Rehabman says to build custom SSDT and limit ports to 15 (using Hackintool). Thought this was the way to go if I don't want to patch with each update. Which is best?

Share this post


Link to post
Share on other sites
1 hour ago, buzzworm said:

All USB ports are working.  So with each 10.14.x update I'll need to update the "USB port limit patch #1 10.14.x modify by DalianSky(credit ydeng)" limits?

 

Rehabman says to build custom SSDT and limit ports to 15 (using Hackintool). Thought this was the way to go if I don't want to patch with each update. Which is best?

dont need custom ssdt, use with all port, no problems

 

this patch work for 10.14.5 too ;)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By shinho73
      I need a good vanilla guide for AMD A8 7600 with A58M-E FM2+ mother board and Palit GEforce GT 730. Any help will be greatly appreciated. Thank you.



    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       
       

       
      GIGABYTE AORUS PRO Z390
       
       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
      Hackintosh Vanilla Desktop Guide
      /r/Hackintosh - corpnewt
       
       
      MONITORCONTROL
      JoniVR & theOneyouseek
       
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
      UPDATES
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB ( connected to monitor with DisplayPort )
       
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16  In this build, both memory modules are installed in memory slots DDR4_A1  and DDR4_B1 
       
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • 1st RECOMMENDED WIFI CARD →  ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      OR
      • 2nd RECOMMENDED WIFI CARD → WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
       
       
       
      WORKING
       
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration AMD RX 580 / AMD Vega
      • iMessages
      • Facetime
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       

       
       

       

       
       
       
       
       
       
      PREAMBLE - BEFORE YOU START 
       
      Here detailed, is all the  steps towards building a successful and stable Aorus Pro Z390 Hackintosh, if you are a first time Hackintosher, this guide will have you quickly up and running with the Aorus Pro Z390 Hackintosh. To rule out potential problems from the go,
      only have the disc that you plan to install macOS Mojave connected to the Aorus Pro, disconnect any other Windows / Linux or data drives, external drives from your Aorus Pro. Windows / Linux and data drives can be connected after successful installation of macOS Mojave
      If you have more than 16 GB of memory, then install macOS Mojave with just 16GB or RAM installed, you can later add any additional memory. Install memory modules in slots DDR4_A1  and DDR4_B1.
       
      This build has a recommended Wi-Fi combo PCI-e card installed in slot PCIEX1_3 with its 9 pin USB cable attached to motherboard header F_USB2.  ( ensure WiFi card is seated properly in PCIe slot and cable is firmly attached to WiFi card and motherboard header F_USB2 ) 
       
      If using the Corsair H100i v2 AIO cooler with USB cable connected to motherboard header F_USB1, you will need to enable hot-patch ( explained in guide ) in config.plist for working sleep, wake from sleep will only work by pressing Power Button.
       
      Install macOS Mojave on its own physical drive, so do not try and install macOS Mojave onto a free partition on a disc that contains Windows.
      Remove any Thunderbolt cards, Thunderbolt card can be reinserted after installation.  Double check your BIOS settings are the same as this guide. 
       
       
       
      Following are unsupported / problematic
       
      • Intel Optane ( if you have this, remove it before installation of macOS Mojave )
       
      • Samsung EVO Plus drives ( ensure you update Plus drive to latest firmware to avoid problems )
       
      • XFX Radeon RX 580
       
      • NVIDIA GTX / RTX not supported in macOS Mojave
       
       
       
      Q - WILL THIS GUIDE WORK WITH MY NON AORUS Z390 PRO MOTHERBOARD ?
      A - Possibly, though you may have to create your own USBPorts fix. 
       
      Q - I notice you have the Aorus Pro Z390 version, will this guide work with Aorus Pro Z390 WiFi version ?
      A - Possibly, but onboard Intel / Intel CNVi WIFII /Bluetooth will not work with macOS and you will have to disable HS14 for Bluetooth to function properly. 
       
      Q - Can I use my AMD Vega Card ?
      A - Yes, AMD Vega card's  will work with this guide, but If you plan to use a Sapphire Pulse Vega 56 then please read @AudioGod ==>post  regarding the Sapphire Pulse 56.
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      • Update BIOS to version F10 
       
      • CLOVER
       
      •  Aorus Pro Z390 EFI.zip
       
      • Aorus PRo Z390 EFI - THE OC VERSION.zip  <== OC VERSION
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • Hackintool
       
       
      OPTIONAL DOWNLOADS
       
      • Native Display Brightness with MonitorControl

      • ThemeEngine 
       
      • Assets.car 
       
       
      // Not really needed but IF no sound on Wake from Sleep then use SSDT-ALC1220 and CodecCommander
      •   ( Resolves Audio Sound on Wake, place in Clover / ACPI / Patched )
       
      •  ( Resolves Audio Sound on Wake, place in Clover / Kexts / Other )
       
       
       
       
      PART 2 - BIOS SETTINGS (Version F10 )
       
       
      Here is a list of the BIOS settings that I use ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled  ( Optionally, can be enabled after macOS is installed, your choice )
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled ( can be enabled or disabled, your choice!)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Disabled ( Optionally, can be enabled after macOS is installed )
      • Power → CEC 2019 Ready → Disabled 
      • Power → ErP → Disabled  (can be enabled or disabled, your choice !)
      • Power → RC6 (Render Standby) → Disabled
       
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Disabled ( Optionally, can be enabled after macOS is installed, your choice )
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customise button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip  Aorus Pro Z390 EFI.zip   ( Video below ) 
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
       
      INSTALL NOTE
       
      ENSURE BIOS: Above 4G Decoding is set to Disabled 
      if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
       
      Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts. 

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
       Here is a walkthrough of the full process using the macOS Mojave USB Installer on the Aorus Z390 Pro. 
       
       
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      At next restart, press F12 and boot from external UEFI USB device and choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
      To boot from the internal system drive without the installer: 
       
      Download and install Clover with RC Scripts on target volume.  
      Copy the EFI folder from inside Aorus Pro Z390 EFI.zip  folder and paste it inside the the System Drive EFI partition.         
       

       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      // UPDATE 21st MAY 2019
       
      Possibly Clover Configurator now automatically populates correct values for working iMessages when you select an SMBIOS.  
       
       

       
       
      After selecting SMBIOS, example iMac19,1 for Aorus Pro with RX580 ( image above ) then go to Apple and ensure you have the "serial number is not valid " message. Done!
       
      If you still have problems connecting to iMessage, test and ensure that AirDrop is working, then follow instructions inside spoiler. 

       
       
       
       
       
       
       
       
       
       
      PART 9 – ENABLE TRIM for Solid State Flash Drives
       
      Open Terminal and enter the following command:
      sudo trimforce enable  
       
       
       
       
       
      PART 10 – FRAMEBUFFERS  FOR RADEON AMD RX580, VEGA CARD's
       
       
       
       
       
      DEFAULT USB FIX –  USB PORTS CONFIGURATION 
       
       

       

       
      If you have USBC on Computer Chassis / Case, then SS01 and SS02 is mapped to that USB C port 
       

       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
       
       
       
       
       
       
       
      OPTIONAL: Set Wi-Fi Country Code
       
       
       
       
       
       
      OPTIONAL: System Information - PCI
       
       
       
       
       
       
       
      External USB Storage:  Fix "disk did not eject properly" message upon wake from sleep
       
       
       
       
       
       
       
      OPTIONAL:  Native Display Brightness - with MonitorControl

       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       

       
       
       
       
       

      OPTIONAL USB PORTS FIX  – Create your own SSDT or USBPorts.kext
       
       
       
       
       
      FRAMEBUFFER PATCHING  – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro  NOT REQUIRED AS GUIDE IS USING SMBIOS FOR IMAC PRO 1,1
       


       
       
       
       
       
       
      FINAL CUT PRO  – Configuration for AMD RX5xx  NOT REQUIRED AS GUIDE IS USING SMBIOS FOR IMAC PRO 1,1 
       
       
       
       
      AORUS PRO Z390 WIFI version with Intel CNVi  – Disable Bluetooth on HS14
       
      Resolve bluetooth issue  reported by @eSaF 
       
       
       
       
       
       
      CLOVER  – Updating / Upgrade Clover boot loader  (If hack is stable, don't update unless you have problems)
       
       
       
       
       
       
      SLEEP  – Sleep and Automatic Sleep

       
       
       
       
       
       
       
       
      SLEEP  – Resolving Instant Wake ( Corsair H100i v2 AIO )
       
       
       
       
       
       
       
       
      WIFI  – Clover Hotpatch PXSX to ARPT
       
       
       
       
       
       
       
       
       
       
       
      RECOMMENDED READING  – Excellent Hackintosh Vanilla guide created by CorpNewt with in depth tutorial on Clover.  
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
      EFI NON DSDT SMBIOS iMac Pro 1,1 Clover v2.5k r5018 
      Aorus Pro Z390 EFI - RX580.zip   OR  Aorus Pro Z390 EFI - Vega-56.zip 
       
      EFI FOR SMBIOS iMac 19,1 for use with GPU & IGPU enabled in BIOS
      PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
      POST-INSTALL Aorus Pro Z390 EFI - RX580.zip ( Has OsxAptioFix2Drv-free2000.efi ==> recommended reading before use )
       
      EFI FOR INTEL UHD 630 SMBIOS iMAC 18,1  
       Aorus Pro Z390 EFI - Intel UHD630.zip( Has OsxAptioFix2Drv-free2000.efi ==> recommended reading before use )
       
       
    • By Pedro Diniz
      Hello Friends, how are ya?

      Could you help me with a problem?

      I followed some guides like: https://www.insanelymac.com/forum/topic ... coffeelake -dsdt /

      and the installation of high Sierra 10.13.6 (17G8030) and nvidia webdrivers (correspondent to OS version) went smoothly, the problem starts when I try to boot the GPU.

      Hardware:
      MOBO: Aorus B360M gaming 3 (rev.1)
      CPU: i5 8400
      GPU: GTX 1060 OC Galax redblack

      BIOS:
      Fast boot - disabled
      windows 8/10 features - other os
      lan pxe - disabled
      storage boot option - UEFI
      other pci devices - UEFI
       
      Initial display output - PCie 1 slot
      Intel's Platform Trust Technology (PTT) - disabled
      sata mode selection - AHCI
      XHCI hand off - enabled
      VT-d - disabled
      internal graphics - auto


      The problem is:
      I can log into the system normally without using my nvidia GPU but when I boot the system with the flags for webdrivers to work I fall into the login screen but it keeps flashing, I can see the mouse and I can move it but the screen flashes and the following error appears when the screen goes "black": IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0. I searched for this error on the internet and tried to solve but to no avail so far.

      If someone can help me I would be extremely grateful! thanks in advance!

      Clover file attached.
      CLOVER.zip
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI CLOVER Z390 DESIGNARE.zip
       
      ---OPENCORE FOLDER---
      *Use this folder with FULL DSDT PATCHED
      EFI OPENCORE Z390 DESIGNARE.zip
       
      ---DSDT patch requests is here---
       
      https://olarila.com/forum/viewtopic.php?f=19&t=1131
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
×