Jump to content
  1. Derty

    Derty

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Aldaro
      So I've had my current hack up, and running now for several months, and it has been great up until now. I took the 10.15.4 update, as well as its supplemental update, and things went downhill really fast. For one, the dreaded, wake from sleep = black display issue has once again popped up, as well as an issue in which the display, if it does wake from sleep, has a weird color to it (the bug closely resembles the pink display problem). Moreover, clover will not boot into single user mode, or properly boot in verbos mode. The system will boot, but it's like the -v flag is being completely ignored. I cannot seem to figure out what's going on, but the situation is pretty bad (especially since at the start of this week, I had a rock solid build). Any insight into this would be greatly appreciated, as I can no longer get some of my work done; thank you to all who read this. I have attached a picture of the display glitch I'm experiencing below.

      System specs:
      Motherboard: Asus prime Z370-A MK ii
      CPU: Core i5 9600k
      GPU: Sapphire pulse RX 580 rev. 2 (This variant has a switch on the card for "gaming" and "compute" modes).
      Storage: 2x Samsung 970 evos (500 GBs) and a 4TB HDD for data
      PSU: Seasonic 750w 80+ platinum
      Wi-Fi + bluetooth: Broadcom BCM 94630CD - works OOB
      Ethernet: Intel i210 gigabit PCIE x1 - again, works OOB
       
       

    • By IDON-NO
      Supplemental update
      macOS Catalina 10.15.4 (19E287)
       
      Update went Fine 
       
      https://developer.apple.com/news/releases/?id=04082020b

    • By End3rPower50
      Hi, i want install MacOS catalina in my laptop.
      i created a USB bootable with Catalina and Clover but it crashed at startup.
      Thanks in advance. 
       
      P.S I upload my EFI’s folder and crash screenshot
       
      Sorry for my bad english.
       
      This is my laptop: 
      CPU: intel i7 6500U 
      Graphics: Intel HD Graphics 520
      Ethernet: Realtek FE Family 
      Wireless: Dell 1820A (BCM94350ZAE)
      USB 3.0
       

      EFI.zip
    • By kushwavez
      A really good motherboard with macOS compatible bult-in Wifi & Bluetooth

      ASUS Z170-Deluxe (with Wifi)
      BIOS: v3801
      CPU: i7-6700K 4.0 to 4.2 GHz (w/o OC)
      RAM: 1x 16 GB Corsair DDR4 2400 MHz
      GPU: Intel HD 530 (Headless) & ASUS Radeon RX 5700 OC 8 GB
      Audio: ALC 1150
      Ethernet: I219V2, I211-AT
      WiFi & Bluetooth: Broadcom BCM94360HMB Half-Mini-PCI-E
      More Specs: https://www.asus.com/Motherboards/Z170-DELUXE/specifications/
       
      Catalina 10.15.4 - Windows 10
      What is working:
      BCM94360HMB Wifi and Bluetooth AirDrop, Handoff, FaceTime, Messages, App Store, iCloud, etc. Intel HD 530 (QE/CI tested, but now I'm using it in headless) Sleep RX 5700 (QE/CI with 2 1080p monitors connected) Sound USB Ports Two Ethernet ports macOS with a light OC (4.12 GHz - 4.5 Ghz, XMP, ASUS optimal) No problem so far ASUS HyperKit with a KINGSTON NVMe SSD - 250 GB  
      What is not working:
      -  
       
      Not tested:
      VideoProc says that Hardware Decoding\Encoding is fully supported and enabled on both HD 530 and RX 5700 but I didn't test it Thunderbolt (no equipment)  
      Issues:
      None  
      BIOS Settings:
      Boot\CSM (Compatibility Support Module): Launch CSM: Disabled Boot\Secure Boot: OS type: Other OS Secure Boot State: Disabled Advanced\System agent (sa) Configuration: VT-d: Enabled Graphics Configuration: Primary Display: Auto iGPU Multi-monitor: Enabled RC6(Render Standby): Enabled DVMT Pre-Allocated: 128M Advanced\PCH Storage Configuration: SATA Mode Selection: AHCI HyperKit: Enable (if you have NVMe SSD with ASUS HyperKit) Advanced\CPU Configuration: Intel Virtualization Technology: Enabled CPU- Power Management Control: Intel SpeedStep: Enabled CPU- C-States: Enabled Intel SpeedShift: Enabled  
      Getting ready for installation:
      Download the bootpack (Clover v5107): Click here -> asus-z170_clover_5107.zip  
      Installation:
      Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) Copy my Clover folder to the USB's EFI folder Boot with the Installer USB If you have any problem (kp or freeze) boot with config_debug.plist to see what causes the issue  
      Post Installation:
      Download Clover Configurator and generate a new Serial Number for yourself  
      Some pictures:
       

       




       
       
       
      Catalina & Windows 10 Dual-Boot (clean install, on one drive):
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac)
       Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart
      Boot into your Win installer, Format the partition you created for Win, install. 
      Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: 
      bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi  
      You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)  
      Mounting EFI from Windows:
      Open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Total Commander or Explorer++ in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI)  
      Notes:
       
      2020.03.26: Updated to 10.15.4 -> Updated WhateverGreen, Lilu -> Updated Clover to v5107
      2020.03.23: Removed "EmuVariableUefi.efi" -> deleted, caused false nvram map, now it's native, updated Clover to v5106
      2020.02.11: Updated to 10.15.3 -> No problem when/after installing
      2020.01.19: Added ASUS HyperKit NVMe SSD to the "What is working" list
      2020.01.12: Tested system with OC, added more informations to BIOS settings
      2020.01.11: Added SmallTreeIntel82576.kext for 2nd Ethernet, Tested Ethernet ports
      2020.01.11: First upload
       
    • By Rohan20
      Opencore is running really really slow on Catalina 10.15.4. So It was running perfectly before I put the ssdt-pnlf for enabling Brightness control. it is running really slow and I verified my config with the sanity checker and its all correct. can someone please help. I am attaching my oc folder.

       
      https://www.dropbox.com/s/drkek0eaz19ina5/OC.zip?dl=0
       
×