Jump to content
glasgood

Glasgood's macOS Mojave [SUCCESS][GUIDE] for Aorus Z390 Pro

24 posts in this topic

Recommended Posts

Posted (edited)

GLASGOOD'S

 

MOJAVE HACKINTOSH GUIDE 

 

 

SystemProfiler.png.bf80abf85aa3d32656523d058dc04dd1.png

 

**FOR**  GIGABYTE Z390 AORUS PRO

 

IMG_4698.thumb.JPG.dbeecbad056f7a2111c4e83aa0b169ba.JPG

 

 

CREDITS & THANKS

 

@MaLd0n

His help with EFI configuration and DSDT

 

CLOVER  TEAM

Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al

 

APPLEALC

Acidanthera, vit9696

 

VOODOOHDA

autumnrain, slice2009, zenith432

 

ESP PRO MOUNTER

@Micky1979 

 

HACKINTOOL

@headkaze

 

CLOVER CONFIGURATOR

Mackie100

 

THEME ENGINE

Alex Zielenski

 

INSANELYMAC

OLARILA

 

Hackintool Tutorial

daliansky

 

MONITORCONTROL

JoniVR & theOneyouseek

 

and many more....

 

------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

PART LIST

 

Intel I7 8700 

Gigabyte Z390 AORUS PRO

Gigabyte AORUS RADEON RX 580 8GB

Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16

Corsair RM650x 80 Plus Gold Power Supply Unit

Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler

Samsung EVO 500GB SSD (2.5) macOS Mojave

Samsung EVO 250 GB SSD (2.5) Windows 10 Pro

NZXT H500 Mid Tower ATX Case

 

 RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  

OR

WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )

 

 

 

WORKING

 

Sound 

HDMI audio on RX580

Ethernet Port

WiFi

SSD Trim

USB 3.0 & 2.0 

AirDrop

iCloud

Hardware Acceleration

iMessages

Facetime

Handoff

Continuity

 

 

 

SystemInfo.png.e076c4142770894753332904fe51c52d.png

 

1796751503_Screenshot2019-03-03at13_51_08.png.811dcea52b63267a2f099e7f53b0501b.png

 

Mac-x-video.thumb.png.22cb041ebe8ccb1e757b6632ec8b7185.png

 

 

 

 

 

PART 1 - DOWNLOAD 

 

 

Download the following:

 

CLOVER

 

• Aorus Z390 Pro EFI .zip

 

ESP MOUNTER PRO v1.9

 

macOS MOJAVE 

 

CLOVER CONFIGURATOR

 

EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder, explained in guide)

 

OsxAptioFix2Drv-free2000.efi ( Replace AptioMemoryFix-64.efi post install )

 

 

OPTIONAL DOWNLOADS

 

Native Display Brightness with MonitorControl

 

• VoodooHDA.kext.zip 


ThemeEngine 

 

Assets.car 

 

 

 

PART 2 - BIOS SETTINGS (version F5 )

 

 

Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )

 

Enter BIOS Press F12 Enter Setup

Save & Exit Load Optimized Defaults

 

BIOS Windows 8/10 Features Other OS

BIOS CSM Support Enabled

 

Peripherals Initial Display Output PCIe 1 Slot

Peripherals Trusted Computing Security Device Support   Disable

Peripherals Intel(R)Bios Guard Intel BIOS Guard Support   Disable

Peripherals USB Configuration Legacy USB Support   Enabled

Peripherals USB Configuration XHCI Hand-off   Enabled

Peripherals Network Stack Configuration Network Stack   Disabled

Peripherals SATA And RST Configuration SATA Mode Selection   AHCI

 

Chipset Vt-d Disabled

Chipset Internal Graphics Enabled

Chipset DVMT Pre-Allocated 64M

Chipset DVMT Total Gfx Mem 256M

Chipset Audio Controller Enabled

Chipset Above 4G Decoding Enabled

 

Power ErP Disabled

Power RC6 (Render Standby) Enabled

 

// IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 

MIT Smart Fan 5 Settings CPU Fan Control mode PWM 

 

Save & Exit Save & Exit Setup

 

SCREEN DUMP SPOILERS

 

Spoiler

 

 

782998380_00-SaveANDExit.thumb.jpg.93b0376d738ce1b84ed58a49fa385cde.jpg

 

 

00.thumb.jpg.a20af599bc753037bc33d879a2e133a8.jpg

 

01-SmartFan.thumb.jpg.72deba62803c04ee34f407a8caef5dba.jpg

 

962807422_02-System.thumb.jpg.686f499b45bcbd139745c6156820daf7.jpg

 

1542013231_03-OtherOS.thumb.jpg.fa746b1ef4b220d459d2865b4428bf2d.jpg

1950972799_04-Peripherals-PCIe1-Slot.thumb.jpg.7258d18d2dc9e0458a61289c087e1c7b.jpg

1114870657_05-Peripherals-Security.thumb.jpg.7f8d1e9a45b1bd6ab95cf55f3771c5cc.jpg

332935054_06-Peripherals-Intel-BIOS-GAURD.thumb.jpg.50c1af4ebc9130e1130c1c3683dea94b.jpg

 

1895690419_07-USB-CONFIG.thumb.jpg.f898d55dd792447195da3aa58cc56927.jpg

 

27185155_08-Peripherals-Network-Stack.thumb.jpg.4148b91fafa7a2dec40cf1cccb25c3fb.jpg

1309713841_09-Peripherals-SATA.thumb.jpg.72dc186afc478db8cdb437d29fc13244.jpg

1485963417_10-Chipset-VT-d.thumb.jpg.80721032ac0b19e46c333a54fd77735f.jpg

70576641_11-Chipset-Internal-Graphics.thumb.jpg.e46cf9777fca8a7cec2cbde4f20befe4.jpg

 

1764041700_12-Power.thumb.jpg.f0e71bd3efa571f61a37ecc8e964fbdb.jpg

 

2008688695_14-SaveANDExit.thumb.jpg.cb9f597097284a9a28ae3f0302e52398.jpg

 

 

 

 

 

 

 

PART 3 – CREATE A MOJAVE USB FLASH INSTALLER

 

Prepare USB Installer for Mojave ( Video below )

 

Insert USB drive

Launch /Applications/Utilities/Disk Utility

Disk Utility View Show All Devices

On Left-hand panel External (Identify your USB device in left hand panel)

Click and highlight your USB device in the left-hand panel.

Click erase button.

Name: USB

Format: Mac OS Extended (Journaled )

Scheme: GUID Partition Map

Click Erase button.

 

Place the downloaded MacOS Mojave app into Applications folder.

Open Terminal copy and paste:

 

sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created

  Enter

 

 

 

 

 

 

 

PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 

 

Make Mojave USB flash drive installer bootable.( Video below )

 

Launch Clover application, double click.

Click Continue Continue Continue 

Click Change Install Location button.

Click Install macOSMojave USB installer Continue

Click Customize button

Choose:

  • Clover for UEFI booting only
  • Install Clover in the ESP
  • Themes
  • UEFI Drivers
  • Install RC scripts on target volume

Click Install button

Installation Complete!

 

Video:

 

 

 

 

 

 

PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO

 

Replace Clover EFI folder with the customised AORUS Z390 configuration ( Video below )

 

Install ESP Mounter Pro v1.9

Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )

 

1615917467_ESPPRO1.png.b15b828693b97de8c9c7e85207e011ab.png

 

1211977075_ESPPRO2.png.39ed1278d738292399174ffe275a49e3.png

 

 

 

Open mounted EFI partition found on desktop

Copy all the contents from Aorus 390 Pro EFI folder

Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.

 

 

COPYandREPLACE.thumb.png.b26f28324445dfd5da10c3b309a77b9b.png

 

 

 

 

 

 

 

 

PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE


INSERT USB INSTALLER INTO THE USB 2.0 PORT  

 

Spoiler

 

 

Aorus.png.096c980136f4fc243f931e1fca732eba.png

 

 

Power on PC and press F12 Choose bootable USB drive from boot menu.

 

Spoiler

 

IMG_0190.thumb.JPG.7fac7dd8e8b515061a405014b3278a6f.JPG

 

 

 

Install macOS Mojave to internal solid state or hard drive.

 

NOTE

During install the system will reboot and you will see onscreen message EXC_CORPSE_NOTIFY exception. This instance is normal,  no skeletons !.

 

 

When system returns to the Clover boot menu choose:

 

Boot macOS Install Prebooter from Preboot

 

Spoiler

PreBootCLover.thumb.JPG.4e2f77feae7ced1055474ea77fe56001.JPG

 

 

After next restart choose:

 

Boot macOS from Macintosh

 

Spoiler

IMG_6620.thumb.JPG.e1ab9267ca269c97a202a9aadad76a32.JPG

 

 

Proceed with macOS Mojave install

Spoiler

 

01.thumb.png.758bb8d16108ff2be4829f8ee7d59d16.png

 

02.thumb.png.591e0577ba54b0374bcf40ab59f96321.png

03.thumb.png.2c03c5b576f7147f7d6a8fc6409342b4.png

 

04.thumb.png.cbbb59f48b9c1c07847be3c681b40ea4.png

 

06.thumb.png.f26cd65602497fcf6f8f7b4e30760699.png

 

07.thumb.png.d6a69e099f98c5fbc8ad44563a1c82fa.png

 

 

08.thumb.png.214f06fd9cd75054bf7e69d66e4c880c.png

 

09.thumb.png.1479d4b737a62afd3ba658d36219fed5.png

 

10.thumb.png.78cc4b87995adffce8e020db673c979d.png

 

11.thumb.png.b11587b7ebc666171dcddd8b8bd41a00.png

 

12.thumb.png.16fd7e42a39711f21ac5cb24694a246f.png

 

14.thumb.png.9c5c29d877346c712949892466298666.png

 

16.thumb.png.686821efa877624f69348bc1763f754e.png

 

17.thumb.png.4a8cd0fdaef672edcee3c429652c68da.png

 

18.thumb.png.98e5cf8227c58c77d59f1b12a9aa3b4b.png

 

19.thumb.png.678b1544385946f88c2647c0814103d2.png

 

DO NOT LOG INTO ICLOUD AT THIS TIME - CHOOSE SETUP LATER!!!!

 

20.thumb.png.b0c5591b39f9dfda722f8af7a94bd7d2.png

 

21.thumb.png.3413d3b4a04b43c32f6f847e212e1223.png

 

22.thumb.png.d6808755bee95849e1104060d1ce5cf4.png

 

23.thumb.png.b7ae168f4f1cc9009effbc7d416ee447.png

 

24.thumb.png.c9306e66fa2bcdeeeca9f799aac7cf24.png

 

25.thumb.png.e1a953becbf6344afa2729c789666cfe.png

 

 

 

 

 

 

 

macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.

 

Installed.thumb.png.f8a42a2aefc81d26464ae0a8d2787636.png

 

 

 

 

 

 

PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE

 

Make internal drive bootable ( Video below )

 

So far, Aorus Pro can only boot with the aid of the Mojave USB Installer.

To boot from the internal drive, copy Clover EFI folder from  Mojave USB installer into the  Internal EFI drive.

 

Using ESP Mounter Pro, mount internal EFI/ESP partition and external USB EFI/ESP

Copy contents from USB EFI/ESP partition and paste into internal EFI/ESP

 

 

Video:

 

 

 

Remove USB Mojave installer and shut down and restart.

 

Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 

 

 

 

 

 

PART 8 – ENABLE IMESSAGES & FACETIME 

 

 

Configure Config.plist for iMessages. ( Video below )

 

SMBIOS = Mac Mini 8.1

Rt Variables —> ROM —> is your MAC address (delete colons from Mac address)

MLB field =  Enter serial number generated and append 5 random characters

SmUUID = in Terminal run command “uuidgen” and copy it to SmUUID field

Board Serial is same as MLB field.

 Clover Configurator —>  Save 

 

Video:

 

 

 

Mount internal drive EFI/ESP partition

Go to folder CLOVER drivers64UEFI 

Delete AptoMemoryFix-64.efi

Place both EMUVariableUefi-64.efi and OsxAptoFix2Drvfree2000.efi inside drivers64UEFI

 

 

Using Clover Configurator, add the following argument to config.plist using Clover Configurator.

 

Slide = 0

 

Slide0.thumb.png.1a2b210ef6b3c15333871de6acaefe41.png

 

 

Shutdown and then press power on button on PC.

 

You should now be able to Log into iCloud, iMessages and FaceTime

NOW delete EMUVariableUefi-64.efi from CLOVER drivers64UEFI Folder 

 Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )

It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as:Couldn’t allocate runtime area  post errors.

 

 

 

 

 

DEFAULT SSDT –  DEFAULT SSDT USB PORTS FIX CONFIGURATION - SSDT ALREADY INSIDE AORUS Z390 EFI FOLDER

 

AorusZ390Port.png.510138c145af1e571497160e3d6843e1.png

 

NZXTportsSSDT.jpg.bb1a6538809c461c36deb3225f51d6c8.jpg

 

1021096465_AorusZ370ProMainboardcopy.png.d4de28551e71d60b25a229a7ea105f21.png

 

 

Limitation: USB2 devices can not be used on SS03 → SS08

 

 

 

 

 

 

------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------

 

 

 

 

 

 

OPTIONAL:  Enable HDMI Audio on RX580
 

Spoiler

 

HDMI-Audio-RX580.png.c76c00e9934ca96d5f1ba4a397e873bc.png

 

 

Download VoodooHDA.kext from top page of this guide and place in Clover → Kexts → Other   ( and thats it done !)

Or

Download https://sourceforge.net/projects/voodoohda/ VoodooHDA.kext and configure yourself ( Video below )

 

EnableHDMIAudioRX580.png.2011c0d6dd1bcb7c055aa5cdee11c916.png

 

 

 

Shutdown and restart

 

 

 

 

 

 

 

 

 

 

 

 

OPTIONAL:  Native Display Brightness - with MonitorControl


 

Spoiler

 

MonitorControl.png.d974a1ab5d86c48fea586022b7a47547.pngDCC-CI.png.97d312dce3281c7517ca22ae8077538e.pngMonitorControlSettings.png.fe3837eeb8e29abd82c40cbf1480b5cb.png

 

 

Requires a monitor with DDC/CI support  for this app to work. Also make sure your monitor has DDC/CI enabled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
 

Spoiler

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE

 

Spoiler

 

sysProfile.png.9e25a5b3c2efbc462fde98ba7c90f96a.png

 

 

Open Terminal, then copy and paste command below. ( Video below )


open . /Applications/Utilities/System\ Information.app/Contents/Resources/

 

  • Copy and Paste original Assets.car to desktop ( save original as a backup )
  • Replace Assets.car within Resources with downloaded Assets.car  ( enter password ).
  • Alternatively you can create your own with your favourite photo editing software, then use ThemeEngine to create Assets.car file. 

 

 

 

 

 

 

 

 

 

 

 

OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 

 

Spoiler

 

1652479414_AoruZ370Pro.png.a2b6374609a19a941a7a25627b99756b.png

 

 

NZXTportsSSDT.jpg.bb1a6538809c461c36deb3225f51d6c8.jpg

 

DOWNLOAD:  SSDT-UIAC.aml

DOWNLOAD:  SSDT-UIAC.dsl

 

 Limitation: USB-C is disabled and one USB3 port

 

 

 

 

 


OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 

 

Spoiler

 

 

 

AorusZ390Port.png.510138c145af1e571497160e3d6843e1.png

 

 

NZXTports.jpg.8f619e955f4730821d2cd1b35a2013e4.jpg

 

 

DOWNLOAD: Alt2-SSDT-UIAC.aml.zip

DOWNLOAD: Alt2-SSDT-UIAC.dsl.zip

 

Limitation: USB2 flash drives can not be used on SS04  SS07 on backplate of motherboard or SS09, SS10 on Front of NZXT Case.

 

 

 

 

 

 

 

 

 

 


OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT

 

Spoiler

 

 

 

GLASGOOD'S SSDT PORTS PATCHING GUIDE USING HACKINTOOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER .....   THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix

 

 

 

 

 

 

 

 

 

 

 

AORUS.jpg.5b3d81690cd90733d2920bf1395d032a.jpg

 

 

 

 

 

 

 

 

SSDT-UIAC.aml.zip

SSDT-UIAC.dsl.zip

 

 

Edited by glasgood
MonitorControl

Share this post


Link to post
Share on other sites
Advertisement
30 minutes ago, Allan said:

Amazing! That's a real guide :thumbsup_anim:

 

Cheers, guide intended for Hackintosh newcomer. :)

Share this post


Link to post
Share on other sites

Great guide, I'm planning an upgrade but will be using the using the Z390 Aorus Master instead so a greater part of your guide will be utilised which will save me a lot of pain in the process. Thanks for sharing :thumbsup_anim:

Share this post


Link to post
Share on other sites

One more thing is there any particular reason you chose Mac Mini oppose to e.g iMac 18.3 - This is so that I can fully understand what Mac model choice is suitable for the build.

Share this post


Link to post
Share on other sites
6 hours ago, eSaF said:

One more thing is there any particular reason you chose Mac Mini oppose to e.g iMac 18.3 - This is so that I can fully understand what Mac model choice is suitable for the build.

 

I Initially started with iMac 18.3, and also tested out iMac Pro 1.1 but could not find any difference between those. Tested and settled with Mac Mini, as the i7-8700 in my build is almost identical CPU i7-8700B as found in the 2018 Mac Mini. 

 

Good choice of board, the Aorus Master ! My EFI folder should get you smoothly up and running and of to a good start, thought you will have to remove DSDT and SSDT from inside Clover folder. Keep us posted on your build! :thumbsup_anim:

 

Share this post


Link to post
Share on other sites

Thanks for the shout back very much appreciated - I've already downloaded your EFI folder and removed the DSDT and SSDT files in preparation. I have the parts on order but have to do it bit by bit as the wife tends to frown upon the amount I spend on my builds considering this will be my third :lol:. The EX58 being my first followed by the GA-Z87X both still rock solid. I will keep you inform about my progress, thanks again.

Share this post


Link to post
Share on other sites
23 minutes ago, eSaF said:

the wife tends to frown upon the amount I spend on my builds considering

 

So does my wife, I lost count of the number past builds and laptops owned :lol:

Share this post


Link to post
Share on other sites
3 hours ago, glasgood said:

My EFI folder should get you smoothly up and running and of to a good start, thought you will have to remove DSDT and SSDT from inside Clover folder. Keep us posted on your build! :thumbsup_anim:

 

Might be an idea to remove the Apple folder from the download and save a LOT of space...

Share this post


Link to post
Share on other sites
4 minutes ago, STLVNUB said:

Might be an idea to remove the Apple folder from the download and save a LOT of space...

Thanks for the tip! Hopefully I won't have to shout HELP too much during this build although I tend to quietly beg borrow and steal from others :whistle:

Share this post


Link to post
Share on other sites
1 minute ago, eSaF said:

Thanks for the tip! Hopefully I won't have to shout HELP too much during this build although I tend to quietly beg borrow and steal from others :whistle:

You're Welcome..But..

I was referring to Aorus Z390 Pro EFI download, Apple Folder should have never been there, its massive.

Share this post


Link to post
Share on other sites
56 minutes ago, STLVNUB said:

You're Welcome..But..

I was referring to Aorus Z390 Pro EFI download, Apple Folder should have never been there, its massive.

Oh ok I understand.

Share this post


Link to post
Share on other sites
1 hour ago, STLVNUB said:

Might be an idea to remove the Apple folder from the download and save a LOT of space...

 

THanks @STLVNUB I removed the Apple folder :thumbsup_anim:

Share this post


Link to post
Share on other sites

I'd bought a gigabyte aorus z390 pro wifi two month ago and from all this time I've been without shutdown and sleep properlly but with this guide my Hackintosh is now working correctly.

 

Very very thanks!!!.

Share this post


Link to post
Share on other sites

Hiya,

 

I have found one issue, my computer wakes immediately after sleep? Does sleep on your computer work??

EDIT: Is it because I have USBInjectAll?

 

Thanks

 

Screen Shot 2019-03-23 at 3.50.57 pm.png

Edited by Cameron Nicholson

Share this post


Link to post
Share on other sites
1 hour ago, Cameron Nicholson said:

Hiya,

 

I have found one issue, my computer wakes immediately after sleep? Does sleep on your computer work??

EDIT: Is it because I have USBInjectAll?

 

Thanks

 

Screen Shot 2019-03-23 at 3.50.57 pm.png

 

Hi Cameron,

 

Sleep seems to be working on my hack, I just tested it and no immediate wake. What USB devices do you have plugged into your machine and are using same hardware as listed in guide. What BIOS version is your motherboard ?

 

Share this post


Link to post
Share on other sites
1 hour ago, Cameron Nicholson said:

Hiya,

 

I have found one issue, my computer wakes immediately after sleep? Does sleep on your computer work??

EDIT: Is it because I have USBInjectAll?

 

Thanks

 

 

Try replacing SSDT with attached below, place both SSDT-UIAC and SSDT-USBX inside CLOVER ACPI patched.

 

>> USB SSDT.zip <<

 

.

Edited by glasgood

Share this post


Link to post
Share on other sites
1 hour ago, Cameron Nicholson said:

Hiya,

 

EDIT: Is it because I have USBInjectAll?

 

 

 

 

If SSDT-UIAC and SSDT-USBX  did not resolve problem, then remove SSDT-UIAC and SSDT-USBX. Then delete USBInjectAll.kext and use USBPorts.kext ( attached below )

 

USBPorts.kext.zip

Share this post


Link to post
Share on other sites
53 minutes ago, glasgood said:

 

If SSDT-UIAC and SSDT-USBX  did not resolve problem, then remove SSDT-UIAC and SSDT-USBX. Then delete USBInjectAll.kext and use USBPorts.kext ( attached below )

 

USBPorts.kext.zip

Thanks,

 

Unfortunately neither solution worked.

 

Removing USBInjectAll for USBPorts.kext disables all USB's.

 

This image is with the ssdt's and usbinjectall.

 

Thanks

Screen Shot 2019-03-23 at 7.08.47 pm.png

Share this post


Link to post
Share on other sites
45 minutes ago, Cameron Nicholson said:

Thanks,

 

Unfortunately neither solution worked.

 

Removing USBInjectAll for USBPorts.kext disables all USB's.

 

 

 

USBInjectAll  USBPorts.kext is working on my system, no ports disabled. Have a look at screenshots below. You are using Aorus Z390 Pro with BIOS version F5 ?

 

 USBPorts.thumb.png.c1fa6c853fc6e09d0c546a38d2fbc61c.png

 

CLover-1.thumb.png.577c4ed11857ce98a6c1958c7ddbe4b0.png

 

Clover-2.thumb.png.ecd1ba97eca2787e372e8538d1fe550b.png

Edited by glasgood

Share this post


Link to post
Share on other sites
27 minutes ago, Cameron Nicholson said:

 

 

 

And with  SSDT-UIAC and SSDT-USBX and USBInjectAll.kext

 

USBPorts2.thumb.png.3d4cc5d6f2ef47efc587cddbbe23da55.png

Share this post


Link to post
Share on other sites
7 hours ago, glasgood said:

 

And with  SSDT-UIAC and SSDT-USBX and USBInjectAll.kext

 

USBPorts2.thumb.png.3d4cc5d6f2ef47efc587cddbbe23da55.png

Thanks man, someone fixed my DSDT by " HS11 and HS13 is built-in now,, but you still get problem with PRW method. I removed PRW method in your DSDT,", not sure quite what they did but it all works

 

 

Share this post


Link to post
Share on other sites
On 3/23/2019 at 3:56 PM, Cameron Nicholson said:

Thanks man, someone fixed my DSDT by " HS11 and HS13 is built-in now,, but you still get problem with PRW method. I removed PRW method in your DSDT,", not sure quite what they did but it all works

 

 

No worries, good you got DSDT fixed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Cobie1990
      Hey everyone,
       
      I have a brand new build every part is brand new specs are:
       
      Motherboard: Gigabyte Z390 Designare 
      CPU: I7-9700k(Coffee Lake)
      GPU: Sapphire Pulse Rx 580 4gb
      Ram: 32gb Trident 3000mhz
      PSU: 750W bronze
       
      All parts were checked on QVL list. So they are compatiable. I can install Mojave 10.14.3 without a problem on my 1tb ssd. 
       
      Now the problem is once i boot up after install and log into mac os Mojave system. After like 5 mins it freezes up and just get stuck and i cant do anything. I have to reset my hackintosh and try again but still after 2-5 mins upon boot up it freezes!(Also bios is set correctly)
       
      If anyone has a fix for this, can yall help me out i need Mac os for video production machine but cant get it to stop freezing!
       
      Help plz thanks for all problems in advance!!

       
       

    • By davi11084
      Salve, recentemente ho installato Mojave sul mio computer. È andato tutto bene soltanto che mi risulta impossibile fare l'accesso con il mio AppleID. Ne da iTunes, ne App Store etc.
      A volte mi dice che ho raggiunto il massimo di dispositivi su all'account quando non ne ho neanche uno collegato. Come posso fare? Rischio il ban dell'appleID? 
      Elenco qua sotto i miei componenti
      I5 7400
      H270 msi gaming m3
      1050 ti 
      16 gb di ram DDR4 Corsair 
       
      Grazie mille aspetto risposte!
    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
    • By SepehrM
      I'm trying to install High Sierra 10.13.3 on an ASUS N552VW laptop, and I get stuck after this message:
      "could not recover SATA HDD after 5 attempts, terminating" 
      And some other warnings afterwards.
      Specs:
      CPU: Intel Skylake 6700HQ 2.6GHz
      RAM: 16GB DDR4
      2TB HDD + 128GB SSD
      GPU: Intel HD Graphics 530 + Nvidia GTX960m
      I'm installing using a 16GB USB3 flash drive on one of HDD volumes (UEFI Mode)
       
      I uploaded the verbose log and clover config.plist
      config-new.plist

    • By Bahaa
      Need help here
      My graphic card is detached 7mb
      and I try a lot of solution and no one work 
      can any one help
       

×