Jump to content
ShiroOne

HELP - GA-z370n-WIFI i7-8700k UHD 630 Panic Error

7 posts in this topic

Recommended Posts

Hi! Newbie here.

 

Been browsing the forums for a while and trying to setup a Mojave 10.14.3 with the following hardware:

  • Motherboard: ga-z370n-wifi - BIOS revision F5
  • CPU: Intel i7-8700k 
  • RAM: G.Skillz Trident Z 32gb (2x 16gb) DDR4-3000
  • HDD: Samsung 860 Evo M.2 1 TB 
  • PSU: Corsair RX750

 

USB used is 2.0

 

I've run into an issue where I'm trying to load the installer, but I am getting a panic error before getting to the Grey install screen.

Followed this guide:

 

See attached Screenshot for kernel panic.

 

If I need to provide more info, let me know and I'll do my best to provide the info :)

 

 

Also i'm not sure how to get the panic logs since I don't get shell unless I boot into single-user mode. (That of which I noticed a panic error whenever I try to run diskutil from single user mode)

IMG_20190201_230345.jpg

Share this post


Link to post
Share on other sites
Advertisement
21 hours ago, Yowie said:

With Clover installer i had no issues starting when i replaced the Config.plist for Coffeelake from this website.

https://github.com/corpnewt/Hackintosh-Guide/tree/master/Configs 

I used this Youtube as a guide.

https://www.youtube.com/watch?v=fA9AotXqkqA

That was on a GA-Z370m-D3H its been running a couple of weeks now ..

 

 

I followed the video exactly and i still came up with the above error.

Do you think it makes a difference if it booted from panic?

Share this post


Link to post
Share on other sites

I don't believe it would make any difference.

 

I noticed for a system model Mac Mini 8,1 has been selected have . you tried to select something else?

 

This is mine you just select from the dropdown in Clover.

 

 

 

 

 

490913084_ScreenShot2019-02-04at6_13_28pm.thumb.png.45b19278fc4e7fe2c356ccac40f40ca4.png

Share this post


Link to post
Share on other sites
On 2/4/2019 at 2:23 AM, Yowie said:

I don't believe it would make any difference.

 

I noticed for a system model Mac Mini 8,1 has been selected have . you tried to select something else?

 

This is mine you just select from the dropdown in Clover.

 

Thanks. What hardware to you have? the same?
I tried iMac 18,1. I can try a different one.

Do i need to clear the Serial # and Serial UUID or leave them auto-generated?

 

So i had tried installing windows 7 on the computer, but it seems that I can reach the install screen, but the usb keyboard suddenly stops working. All my USB ports are 3.0 and i don't have any 2.0 ones. I tired both wireless and wired keyboard.

 

Share this post


Link to post
Share on other sites
On 2/7/2019 at 1:25 AM, ShiroOne said:

 

Thanks. What hardware to you have? the same?
I tried iMac 18,1. I can try a different one.

Do i need to clear the Serial # and Serial UUID or leave them auto-generated?

 

So i had tried installing windows 7 on the computer, but it seems that I can reach the install screen, but the usb keyboard suddenly stops working. All my USB ports are 3.0 and i don't have any 2.0 ones. I tired both wireless and wired keyboard.

 

I have a Gigabyte GA-Z370m-D3H Motherboard which is very similar it also only has USB3 & 3.1 ports and Intel i7 8700 .

I never reset the serials i just tried a couple of different Models until i found one the mostly every thing worked straight up, now the only issue i have is the sleep issue which seems to be common..

 

 

Share this post


Link to post
Share on other sites
On 2/8/2019 at 4:03 AM, Yowie said:

I have a Gigabyte GA-Z370m-D3H Motherboard which is very similar it also only has USB3 & 3.1 ports and Intel i7 8700 .

I never reset the serials i just tried a couple of different Models until i found one the mostly every thing worked straight up, now the only issue i have is the sleep issue which seems to be common..

 

So the odd thing is that i can't even boot to the installer. Can't seem to figure out what the issue might be. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By poles89
      Hi guys,
       
      Though native graphics acceleration is supported on i3 from Mojave, I'm not able to manage to get it.
       
      This is my system configuration :
      Motherboard:  Asus Prime H370-Plus
      CPU: i3-8100 (UHD 630)
      OS: Mojave 10.14.2
       
      I'm trying every possible way to get full graphics acceleration. But whatever I try it shows only 4MB video memory or leads to Kernal Panic. Here are some ways I have tried so far:
       
      Prerequisites: 
      Installed latest Lilu+WEG on L/E. set DMVT prealloc to 64MB on bios.  
      Option 1: IntelGFX-> 0x3E928086, ig-platform-id-> 0x3E9B0007, Inject Intel = true. Output:  Kernal Panic
      Option 2: Blank IntelGFX, blank ig-platform-id, Inject Intel = false Output:  Kernal Panic
      Option 3:  IntelGFX-> 0x3E928086, ig-platform-id-> 0x5912000, Inject Intel = true.  Output: Booted Successfully but no graphics acceleration.
                     I knew that ig-platform-id-> 0x5912000 doesn't work in mojave and its works only for high sierra but I set this because with this ig-platform-id I can boot. Another way I can boot it by
                     setting invalid Fake IntelGFX value like 0x12345678.
      Option 4:  Downloaded Intel FBPatcher & followed this guide. But as I opened the app, its shows like this:
       
                     
                    
                     It clearly indicates it neither can detect Intel CPU generation nor GPU memory (currently shows 0 MB). I changed to different PlatformId from the drop down but no improvement. Anyway I
                     applied a patch with SMBIOS ->Macmini8,1 by someione's recommendation . I attached a config file (config_fbpather.plist) for this. Output:  Kernal Panic
       
      I have tried the upper mentioned methods with SMBIOS like  iMac14,2 / iMac18[1,2,3]  and Macmini8,1. I'm using HDMI port for display output. Now I don't know whats wrong with theses methods but maybe someone can help me to figure out this problem. I have also attached those config.plist files.
       
      Thanks in advance.
       
      config_fakeid_0x3E928086.plist
      config_fbpatcher.plist
      config_fbpatcher_with_device_id.plist
      config_platform-id_0x59120000.plist
    • By poles89
      Introduction
      30th October Brooklyn, New York, Apple announced a "re-engineered" Mac Mini - the first update to small sized desktop Mac since 2014. Surprisingly, they also unveiled a new i3 8th generation based "affordable" Mac Mini which costs $799. Cool...right? Not cool for me. So, I decided to build a really "affordable" hackintosh mac mini instead and successfully managed to build it around $614 .This is my 4th hackintosh build.
       
      Hardware
      Asus Prime H370-Plus
      Intel Core i3 8100 3.6GHz
      Corsair Vengeance 2400MHz DDR4  16 GB RAM
      Kingston SSDNow A400 240GB
      Cooler Master MWE 450 Bronze, 80+ Bronze Certified 450W Power Supply
       
      LG VGA Monitor (1366x768)
      HDMI to VGA Adapter
      DVI-D to VGA Adapter (Optional)
      Logitech USB Keyboard & Mouse
       
      Software used
      macOS Mojave 10.14.2
      Clover EFI Bootloader 2.4k r4813
      Clover Configurator 5.3.2.0
       
      What works
      Graphics Audio All USB ports Sleep/Wake iMessage/FaceTime  
       
      Instructions
       
      BIOS Settings:
      Use "Delete" to enter you UEFI setup.
      Load Optimized Defaults Disable VT-d Disable Secure Boot Mode Set OS Type Other Turn off internal Serial port Turn off Network stack for boot Set XHCI Handoff to Enabled Enable HD Audio Don't enable decode over 4G Set Primary Display to iGPU Set DMVT pre-alloc to 64MB or 128 MB Set USB legacy to enabled Activate XMP profile 1 Set ERP to enable  
       
      Installation:
      I used the default command to create a bootable Mojave Installer on a 8GB USB drive. Then I installed the Clover_v2.4k_r4813 pkg on the bootable drive with these options:
       
       

       
       
      Also select EmuVariableUefi-64.efi from UEFI Drivers list which will fix the rebooting issue if you may face during Mojave installation. Next, mount the USB's EFI partition and navigate to Clover/kexts/Other and place FakeSMC.kext & USBInjectAll.kext into that. Now go back to Clover folder and delete config.plist file and paste an empty config.plist file. I have attached it at the end of the post.

      Plug the USB to your machine and press F8 and select your bootable drive. Next Format the drive using disk utility & install macOS. During installation the computer will reboot several times but every time press F8 and select your bootable drive and then select Install Mojave from your SSD/hard drive.
       
       
      Post Installation:
      Run Clover Configurator and go to TOOLS > Mount EFI > Mount Partition > Open Partition (choose your macOS drive)
      Copy the EFI folder from USB's EFI to your drive's EFI.

      Gather the necessary kexts.
      FakeSMC.kext Realtek Lan Driver a.k.a RealtekRTL8111.kext Lilu.kext WhateverGreen.kext for graphics AppleALC.kext for audio USBInjectAll.kext for USB ports Now open Terminal and type the following one by one:
       
      sudo chmod -R 755 /System/Library/Extensions/* sudo chmod -R 755 /Library/Extensions/* sudo chown -R root:wheel /System/Library/Extensions/* sudo chown -R root:wheel /Library/Extensions/* sudo chown root:admin /  
      This will fix ownership and permissions...

      Copy & paste all kexts to Desktop & use any Kext Installer to install them to /Library/Extensions/.

      Then run the following command into terminal:
       
      sudo kextcache -i /
      Open /EFI/EFI/CLOVER/config.plist with Clover Configurator
      Next, we have to edit config.plist file . First make a backup of the empty config file. Download the latest Clover Configurator and open the config file. Next I have done the following modifications:
      ACPI: HDAS -> HDEF, HECI -> IMEI, GFX0 -> IGPU, XHC1 -> XHC, EHC1 -> EH01, EHC2 -> EH02 Under Generate Options, check PluginType Under Fixes, check FixShutDown, FixHPET, FixIPIC Under Drop Tables, check Halt Enabler, FixHeaders, FixMCFG Boot: Arguments: dart=0 Devices: IntelGFX=0x3E928086, USB-> check Inject, FixOwnership, Audio=1, check ResetHDA GUI: Under Hide Volume, Click + and enter "Preboot" Graphics: Inject Intel, ig-platform-id=0x3E9B0007 SMBIOS: iMac 18,1 Rt Variables: Click the dropdown and select "UseMacAddr0", in MLB enter the Board Serial Number from SMBIOS section. Double check if CsrActiveConfig value is set to 0x67 or not. Reboot.
       
      Graphics:
      This is where I stuck nearly 1 month. After setting IntelGFX=0x3E928086 & Inject Intel with ig-platform-id=0x3E9B0007 it should work right after reboot as WhateverGreen handles the rest. But it didn't work, the display goes off whenever I tried to boot.

      I have tried the other combination like, IntelGFX & ig-platform-id to blank with uncheck Inject Intel as i3 8th gen UHD 630 is natively supported in mojave. But no luck. I only able to boot with a invalid IntelGFX.

      Next, I followed @headkaze's framebuffer patching using WhateverGreen guide. I tried to use Intel FB-Patcher a.k.a Hackintool, but its shows me like this:
       
       

       
       
      That means it can't detect the CPU generation & also the video memory. No matter what SMBIOS I tried. Even ioreg showed no "AppleIntelFrameBufferX". So forget about framebuffer patching. Though I tried different combinations of framebuffer patching which I found in this forum but it didn't work.
       

       
      Detecting CPU generation & Video memory is really important if you want a framebuffer patch. I also tried different Lillu+WEG versions. I even upgraded the BIOS to the latest version.
      Then I found  a framebuffer patch which also consists a connectors patch, which worked for ASUS H370M-Plus motherboard, worked for me.

      As I have only HDMI, DVI-D & VGA video port.
      Row 1: Index 2, BusID 0x02, Type HDMI Row 2: Index 3, BusID 0x04, Type HDMI <-- assumes HDMI here Row 3: Index 1, BusID 0x01, Type DP Just go to Deviecs->Properties and paste this:
       
      Save the config file & restart. Now I have 1536 MB Intel UHD 630. YESS !!!
      The patch works for both DVI-D & HDMI even I don't have to change type HDMI to DVI-D.
      So you see how connectors patch plays a crucial part if you want to use your Intel iGPU & onboard HDMI, DVI-D & DP connectors. After applying the patch the Hackintool looks like:
       

       
      And here are the connectors tab for HDMI & DVI-D respectively.
       
                  
       
      USB Port Fix:
      I followed the @headkaze's USB port patching guide mentioned in his thread. Now, as my USB controller's device id is 8086:A36D I had to install XHCI-unsupported.kext in Clover/kexts/Other. So after removing unused ports General->USB tab looks like this:
       

       
      Next, after rebooting with -uia_exclude_hs uia_include=HS09,HS10 boot flag it looks like this:
       

       
      Now, I used “Export” button to generate the USBPorts.kext & copied the file into EFI/CLOVER/kexts/Other. Removed unnecessary files like boot flags (-uia_exclude_ss -uia_exclude_hs uia_include=x), USBInjectAll.kext, Clover Renames (XHC, EH01, EH02). After rebooting the USB port limit is fixed. I have attached the kext files also if anybody needs it.
       

       
       
       
      config_usb.plist
      config.plist
      USBPorts.kext.zip
    • By mizznfizz
      Copying this over from the other major forum as things seem pretty dead over there. Didn't see a dedicated "builds" forum here so hope this is the right spot. People on other social media recommended coming here. 
      Alright, so the build has commenced, just waiting on the power supply (ended up not realizing that I bought the compatible power brick for the HDPlex 400w and then bought the PicoPsu 160, so that is going back and HDPlex is on its way) and monitor to get here.
      Found a smoking deal on an Acer-K272HUL-Dbmidpx 27" IPS display through Newegg ($216 shipped to my door) that has gotten great reviews, be careful when looking for this as the EBmidpx (different model) looks the exact same but is a TN Panel and comes up in many of the searches.
       
      Anyways, here is specs for final build...
      - Mobo - ASRock Z370m-itx/ac [$120 amazon]
      - RAM - Crucial Ballistix Sport LT 8gb [$49 amazon]
      - WiFi/BT - Lenovo Broadcom BCM94352Z [$13 ebay]
      - SSD - Samsung EVO860 1tb [$128 amazon]
      - CPU - Intel Core i5 8400 [$185 newegg]
      - Cooler - Noctua L9i [$40 amazon]
      - Case - Wesena ITX4 v3 [$97 perfect home theater]
      - PSU - HDPlex 400w [$95 hdplex]
      - PSU Brick - Dell PA-9E 240w [$37 ebay]
      - Monitor - Acer K272HUL 27" IPS [$216 newegg]
      Total: $883 (shipping included in prices, most were free shipping)
       
      This build will be mainly for your everyday computing needs, paying bills, watching YouTube videos and the occasional light photo editing session (have other expensive hobbies now so photography has fallen to the wayside). This is coming from a mid-2011 iMac 21.5" base model that is slowly dying (getting graphical artifacts on a constant basis now and the occasional sudden reboot). The iMac is no longer compatible with any new Mac OS upgrades (no Mojave) so I figured she had a good life over the last 8yrs and it was time to pick-up something new. Since I was fairly unimpressed with the specs for the money with regards to the new Mac Mini's I figured this would be a good chance for me to do a hackintosh.
       
      Install will be a Vanilla High Sierra build, since that is the only version I have access to on my iMac. From my research I have downloaded the following kexts for install.
      - Broadcom Fix (both the firmware repo and firmware patch)
      - IntelMausiEthernet
      - WhateverGreen
      - Lilu
      I am using the two following builds on the other forum as my baseline as they are very similar builds to mine.
      Suneys Mini Cube from the other forum and the Tiny But Might build from the same forum. 
       
      With that said, I plan to use Morgonaut's guide from YouTube to build the hackintosh up (hopefully next weekend). Once everything is running stable in High Sierra I will hopefully be able to update to Mojave without any major issues and then keep moving forward with life. So, am I forgetting anything?
    • By gk12345
      Hello everyone, i have managed to install mac os mojave on my new hack i was able to get some basics working but i can not get graphics to work UHD 630 of i5 8400 it only shows 7mb of memory i have tried a lot of guides with no result i have tried installing whatevergreen and lilu, changing platform id and such, also i want to mention that i was able to boot only by setting platform id to 0x12345678 otherwise it would restart in gloscreenlock 3 hs0 now 0 sm0xo i am relatively new to hackintosh any help would be appreciated. thank you!
×