Jump to content

48 posts in this topic

Recommended Posts

On 4/26/2019 at 5:48 AM, javashin1986 said:

The first screenshot shows the meter of input level because i was talking to the laptop with my handsfree 

the second one is without handsfree i was screaming and the levels dont move a bit and in google chrome when i do a facbook video call i have no mic.

 

i tried to use appleACL and dont work for me i just installed the kext and nothing no sound im back to voodoohda

 

this repo maybe be useful https://github.com/Snikii/Lenovo-ThinkPad-L440 but i dont know how to use this ....

 

 

This repo is not updated do Mojave yet. 

 

About the mic, please test in Windows, maybe is fault.

Share this post


Link to post
Share on other sites
Advertisement

Works On Windows Linux Freebsd 

Hey Can I have some Tips On How To Repaste Thermal paste on this laptop ? i have a intel i5 4200M and gets too hot . 

Share this post


Link to post
Share on other sites
Posted (edited)
On 4/26/2019 at 4:48 AM, javashin1986 said:

The first screenshot shows the meter of input level because i was talking to the laptop with my handsfree 

the second one is without handsfree i was screaming and the levels dont move a bit and in google chrome when i do a facbook video call i have no mic.

 

i tried to use appleACL and dont work for me i just installed the kext and nothing no sound im back to voodoohda

 

this repo maybe be useful https://github.com/Snikii/Lenovo-ThinkPad-L440 but i dont know how to use this ....

 

 

If you use AppleALC, make sure Lilu kext is in the same directory. Also, under Devices,  set Audio inject to 1. This should allow AppleALC to work. I have used it before and it worked perfectly.

Edited by CyCLoBoT

Share this post


Link to post
Share on other sites
8 minutes ago, javashin1986 said:

Hello 10.14.5 is out and patched for mds zombieland , any way to disable all the mitigations ? spectre spectr2 mds etc ?

 

I'm not within the vulnerabilities of Intel. I will update to version 10.14.5 soon and update the guide.

Share this post


Link to post
Share on other sites

to enable full mitigation we have to do this 

With those qualifiers in mind, to enable full mitigation, follow these steps:

  1. Restart your Mac and hold Command key and the R key to enter macOS Recovery mode.
  2. Open the Terminal from the Utilities menu.
  3. Enter the command ‘nvram boot-args=”cwae=2″‘ (without single quotes) and press Return.
  4. Enter the command ‘nvram SMTDisable=%01’ and press Return.
  5. Then restart the Mac.

add those to clover but what if we want to disable every mitigation around ?

 

Share this post


Link to post
Share on other sites

hello something really wrong happen if someone can reproduce this i was on the app Activity Monitor And I Selected System Diagnostics and I though ItWas Running In The background and it was but instead of give me a report the laptop rebooted Out Of the Blue nothing show just black screen and bang Lenovo Logo Back To Clover.

Share this post


Link to post
Share on other sites
Posted (edited)

Working fine. I did not change my hardware, and used 32MB_DRAM-prealloc_config.plist.zip
First time doing this so I am a complete newbie, I used my family MacBook to make the install image.
Thank you so much for this guide, and thank you to all the contributors listed. My friend recommended me to use another method involving tonymac which is not supported by this forum, and such but I am not sure if this will work so I went with the sure thing :)


You can also just mount the whole USB instead of specifically the EFI partition: sudo diskutil mountDisk /dev/diskX
Also, you need to mount the EFI of your system too when installing (sudo diskutil mount /dev/disk0s1 - you always typically format system to disk0 anyway ...),
you should add this part in, I am sure everyone will figure it out just because it is necessary, but why not?

I also made sure to copy SSDT-L440.aml from the USB too iton /Volumes/EFI/CLOVER/ACPI/patched/ in my new installation, even though it was not listed, did I do it correctly?
 

 

I can tell you this: Compared to Synaptics drivers for Windows the default touchpad is UNUSABLE for this model right now. You are right here.
I have another model with the better touchpad installed, the one you recommend, but it is a L450 and my current laptop,
it also has 1080P IPS screen already installed + upgraded CPU and would be MUCH MUCH better than using this one. I wonder if I can do the exact same on this model?

 

For reference here is my
L440 - 20AS, my old laptop which was lying unused for months now, with i3 2-core CPU, does not overheat with this CPU.
L450 - 20DT with i5 CPU instead and 1080P IPS, the best touchpad ...

They are clearly different by the fact that the newer model uses the thinner shell which is annoying, because having to open it up you cannot just undo the screws,
you have to carefully use a prying tool around the back so as to not damage it that much to get the plastic clips off... So annoying. I assume it wont work just like that, but maybe?

 

 

EDIT: Very strange, I Googled and online guides also wrote that L450 already has DVMT pre-allocated size to 128. Hmm

 

Edited by courfazor

Share this post


Link to post
Share on other sites

Hi @courfazor, thanks for the feedback.

 

I will answer some questions:

 

1 hour ago, courfazor said:

I did not change my hardware

 

The original wireless card is not compatible. So your wifi is not working, right?

 

1 hour ago, courfazor said:

Also, you need to mount the EFI of your system too when installing

 

I omitted this part because you would have just installed Clover on the internal disk, so the EFI partition would already be mounted. But I'll add that anyway.

 

1 hour ago, courfazor said:

I also made sure to copy SSDT-L440.aml from the USB too iton /Volumes/EFI/CLOVER/ACPI/patched/ in my new installation

 

That part was missing. I just added it now.

 

1 hour ago, courfazor said:

I wonder if I can do the exact same on this model?

 

You can follow the same steps with the exception of SSDT-L440.aml that you will need a new one. Try first the 128M config.plist then 32M config.plist.

 

1 hour ago, courfazor said:

does not overheat with this CPU

 

The concern with overheating was with the new processor I put. The original did not really heat up.

 

 

Share this post


Link to post
Share on other sites

First of all, thanks so much for this guide. 

 

I followed it to the letter with the exception of replacing hardware and re-flashing the bios. However, after selecting "install from MacOs" in Clover (per verbose mode) it automatically reboots right after "end randomseed". So I can't even reach the installer. Any suggestions would be greatly appreciated. 

Share this post


Link to post
Share on other sites
1 hour ago, Ameeno said:

WOuld this work for t440P?

 

How similar is the hardware?


It’s very simillar, but, it’s better folow this

 

 

On 7/2/2019 at 1:49 PM, eponymous_writer said:

First of all, thanks so much for this guide. 

 

I followed it to the letter with the exception of replacing hardware and re-flashing the bios. However, after selecting "install from MacOs" in Clover (per verbose mode) it automatically reboots right after "end randomseed". So I can't even reach the installer. Any suggestions would be greatly appreciated. 


Check if AppleRTC, KernelPm and ASUSAICPUm are enabled. Open config.plist with Clover Configurator

Share this post


Link to post
Share on other sites

Hi and thanks alot for this very complete guide. Am about to get almost the same laptop thinkpad L440 but its built with intel core i3 4000M wich has the same graphics as yours (intel HD graphics 4600) so just wondering if i could grab your shared files and use them "as is" ?

thx again

Share this post


Link to post
Share on other sites

@aikido14 teorically will work "as is".

 

Just make sure to use te 32MB config.plist if you'll not mod your BIOS.

 

- Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below

              If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip

              If no, then use 32MB_DRAM-prealloc_config.plist.zip

 

And you'll not have WIFI working without mod your BIOS. Because you need to replace the stock wifi card, and have a BIOS protection (whitelist)

Share this post


Link to post
Share on other sites
Posted (edited)

Hi, just wanted to point out the typo error:

My nickname is Sniki not Shiki, i saw it at the credits section as i see people seem to confuse that quite often (maybe it's due to the legacy "Shiki.kext") :D

 

Whatever files you used from my repo, they will be updated soon these upcoming days into github and so will my guide, i have updated them locally and will push the changes live into github soon.

Plenty of optimizations and code cleanup and more efficient patches.

I also created Dynamic System Logos so when you use dark mode, when you go to About this mac, the L440 laptop  appears with Dark Mojave Wallpaper and when you set light mode, it appears with light wallpaper.

 

Audio does work excellent for me even with AppleALC + CodecCommander + alc_fix (which is my default use).

However yes, the audio volume is lower than windows maybe voodooHDA can fix that issue.

 

Nice detailed guide and great explanation for the modded bios signature problem.

 

A lot of people reported having that problem after they patched bios but the problem was that the people who patched their Bios-es, were not experts or forgot to fix the signature. as in my cases none of my ThinkPads had that problem as the guy who patched my first one, i contacted him for my other thinkpads and he did correct the signature when he did send the mods everytime without asking him.

 

 

Edited by "Sniki"

Share this post


Link to post
Share on other sites
Posted (edited)

I installed the new update 10.14.6 here working fine upgraded clover to version v2.5k_r5028  

https://github.com/Dids/clover-builder/releases

 

Using Raw Vanilla Img  Olarila Mojave 10.14.6.raw.bz2  Here https://olarila.com/forum/viewtopic.php?f=51&t=10412

 

No Need Mojave Patcher To Install On HFS+ .

 

Happy Upgrading.

 

Edited by javashin1986

Share this post


Link to post
Share on other sites

@"Sniki" Sorry. Fixed it.

I look forward to the updates.

This dynamic update you are doing sounds interesting.

 

@javashin1986 I haven't had time to upgrade to version 10.14.6 yet because I'm using this hackintosh at work. I work with mobile development, so I'm afraid to give any problems. Soon I will complete a project and I will perform the update, but it is good to know that it worked without problems.

Share this post


Link to post
Share on other sites
Posted (edited)
On 7/30/2019 at 5:04 PM, ludufre said:

@javashin1986 I haven't had time to upgrade to version 10.14.6 yet because I'm using this hackintosh at work. I work with mobile development, so I'm afraid to give any problems. Soon I will complete a project and I will perform the update, but it is good to know that it worked without problems.

 

I really get that, that is why I like to work with virtual environments for projects so that my dependencies can be locked to certain versions for only the project. I also am very motiviated to have a Hackintosh, especially after success doing it with my L440. It will be useful to do Swift UI programming, which I do not think is possible on Linux or Windows, and so I will await you new guide and try attempt a dual-boot Mojave + Linux/Windows, if its possible I believe installing Windows first as the Linux rule is (since Windows cant read Linux partitions and just proceeds to wipe everything) is the best idea, for Linux I am not sure. I remember from the time I used a MacBook exclusively that Clover was able to boot multiple OS perfectly. Either way thanks again and looking forwards to your update!

Edited by courfazor
typo

Share this post


Link to post
Share on other sites

@courfazor I use for hybrid programming (Ionic). I stopped updating this guide because I'm using Catalina. Soon, I'll post a guide for him.

Share this post


Link to post
Share on other sites
23 hours ago, ludufre said:

@courfazor I use for hybrid programming (Ionic). I stopped updating this guide because I'm using Catalina. Soon, I'll post a guide for him.

Looking forward to your guide for running Catalina on this laptop.

Share this post


Link to post
Share on other sites
Posted (edited)
On 8/25/2019 at 4:12 AM, ludufre said:

@courfazor I use for hybrid programming (Ionic). I stopped updating this guide because I'm using Catalina. Soon, I'll post a guide for him.

 

Works well with Catalina? One of the reasons I got mad at OS X is because after I updated my MacBook the mousepad stopped working as intended (not able to right-click) due to older model. But maybe with Hackintosh it does not matter? I am also looking forwards to your new guide, thank you for doing this.

Edited by courfazor

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tonyx86
      I was inspired by @duduclx post for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5.  Everything works perfectly (including sleep with the solution described later in this thread).  I'm starting this thread hoping to help others install Mojave on their E6410s.  This thread is not currently intended to be an installation guide and is better suited to the intermediate/advanced hackintosher.  Eventually, it may evolve into a guide.
       
      I started with this thread and ended up with the system captured in the attached files.  The keys were to change the LPCB._DSM.Name to "3b09" and remove all CLOVER configs not necessary for Mojave, plus some other items mentioned below.
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 5, not the original version), USBInjectAll (with custom SSDT-UIAC) Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads  No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Sleep is not working with the files attached to this first post, but I have found the solution for sleep/wake.  Read Known Issues below. Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings.  The slider appears in Display settings (because of the backlight DSDT injection in AGP.VID._DSM), but the slider doesn't work (yet).  Haven't spent time to figure this out, but would love help. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      SD Card Slot Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera  
      Known issues and their solutions
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2.  This has been completed and tested, but does not fix the sleep behavior.  This fix is not reflected in the attached files. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European.  The updated VoodooPS2Controller.kext is not reflected in the attached files. This proposed configuration uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior and have not updated attached files to reflect this change. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly.  I have made this change and am testing it on my system, but have not updated the attached configuration files. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The DSDT patch that duduclx refers to as "Intel GMA Ready" in his El Capitan Guide is not applied correctly to the DSDT attached to this post.  Somehow, the contents of patched _DSM are located in the PCI0.VID device instead of in Method (_DSM) within the PCI0.VID device.  MaciASL didn't complain about this, so it went unnoticed, but it doesn't appear to have had any affect.  I have completely removed this "Intel GMA Ready" patch from my DSDT since it is not necessary for Dell Latitude E6410's with NVidia 3100m, but have not updated the attached DSDT. The assigned value of ACOS in the DSDT is conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc), analogous to the assignment of OSYS.  I made this change in my DSDT (not yet reflected in the attached files), but have not observed any behavioral differences (sleep or otherwise).  EDIT: Another way to handle this might be to override _OSI with XOSI (defined in a custom SSDT).  Still learning about XOSI and haven't yet drawn a conclusion.  I'm currently experimenting with ACOS and OSYS equivalent to Win7 and Linux (manually patched in my DSDT which has not yet been updated as a new attachment to this post). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  I believe that this should be an internal USB port (portType=2).  My custom SSDT-UIAC.dsl is wrong.  I just learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  I have not attached an updated SSDT-UIAC.aml to this first post, but my current EFI includes an updated SSDT-UIAC.aml with ports HP15, 16 17 and 18 set to internal (portType = 2).  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.  These changes are not reflected in the attached DSDT.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF() and _ON() methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/.  I currently have sleep working on my Latitude E6410 and am continuing to test it.  The solution is documented later in this thread, but files are not yet attached to this first post.  
      Brief Installation Guide (for the experienced Hackintosher):
      Follow duduclx's guide for BIOS config Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original) Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z

      CLOVER.zip
    • By DerNuntius
      Hi,
       
      Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
       
      Thank you for helping.
      Greedings,
      Hugo
       
       
      CLOVER.zip
    • By benmills1
      Hi, i can someone help me with installing mac OS Mojave on my HP ENVY - 15-as102na?
      I have an imac to use for setting up my usb & installing MacOS Mojave.There are various kext files etc that i'm not sure about and need some help as some are hardware specific.
      I tried previously but got stuck on an apple logo and couldn't get past that, and tried today and had problems with Clover.
      Once i get mac os on my 128gb m.2 ssd ( which i'll upgrade to either a 256gb or 512gb depending on how well this hackintosh works)
      I have a free 2.5" inch hdd bay where i'd like to install windows on in the future.
      I think i may have to replace my wireless card ( based on a few google results) which i'm fine with as long as i can see it working without just so i know i won't waste money
      Specs:
      Cpu: i5 7200u
      GPU: HD 620
      8GB ram
      Wifi card- Intel Wireless 7265 ( Intel® 802.11ac (2x2) )
      Motherboard - HP 81D2 & BIOS version is f.56
      https://support.hp.com/gb-en/document/c05311862
      Thanks
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/forum/download/file.php?id=25033
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By takeawaydave
      Running Mojave 10.14.6 (18G95) on a Dell Precision 7510 and trying to get all framebuffers working properly.
       
      The following CPU is being used: https://ark.intel.com/content/www/us/en/ark/products/89608/intel-xeon-processor-e3-1505m-v5-8m-cache-2-80-ghz.html
       
      The actual Device ID of the iGPU is 0x191D.
       
      There are the following graphical outputs:
       
      mDP
      HDMI
      Thunderbolt
       
      Clover 5058 (update to date at time of writing) is being used and up to date versions of Lilu 1.38, WEG 1.3.1
       
      Till now I've been running with the following config:
       

       
      with Model Name: MacBookPro13,3
       
      When using 191B:
       
      LDVS - Ok
      HDMI (no audio) : 1920x1080
      Thunderbolt (no audio) : 3440 x 1440
      no mDP
       

       
      191B-config-ioreg.zip is attached.
       
      When using 1912:
       
      No LDVS (as expected since this arrangement is targeted for iMac17,1
      HDMI (with audio): 1920 x 1080
      Thunderbolt (with audio) : 3440 x 1440
      no mDP
       
      1912-config-ioreg.zip attached
       
      Question:
       
      How can I get audio working as with 1912 on the 191B laptop config ? 
       
       
×