Catalina update 10.15.4 without issues, make sure you update your kexts before hand and clover 5107
Catalina update 10.15.3 without issues, make sure you update your kexts before hand.
Catalina update 10.15.2 without issues, make sure you update your kexts before hand.
Catalina update 10.15.1 without issue although you may have to make sure clover boots from the right partition.
HP 840 G2/G3, working with OS X 10.15 Catalina, for this to work you will need the SSDT-ECUSBX.aml and place that EFI/CLOVER/ACPI/Patched.
Make sure you remove Remove all patches about renaming acpi of EC or H_EC, revert all ACPI renaming in ACPI DSDT.
My method to install OS X on the SSD from a working real Mac via SSD to USB converter. I then install Clover and add my kexts and set the config.plist
SD Card reader
Finger Print device
Video - screen looks better in OS X then it does in Windows 10
WiFi and BlueTooth working OOO using the below hack
Battery status with Rehabman's DSDT patch
Sounds - using VoodooHDA
* Microphone - cannot turn it off or mute
Keyboard backlight - controlled though BIOS anyways
touchpad - using VoodooPS2Controller
USB3 - this laptop has two on board only and I haven't test them using the docking station
Ethernet - using IntelMausiEthernet
Sleep - kind of, closing the lid doesn't go to sleep but goes to sleep over time.
Web Cam, works but I covered it up.
Few days back I had bought HP Elite Desk 800 g1 workstation and its config. is:
Intel Q87 Chipset motherboard
Intel core i5 4570s processor
4gb DDR3 ram
4gb GTX 1050 TI OC LP
In this machine I successfully installed macOS Sierra 10.12.6 (16G29). But I'm getting an error in verbose mode like some contagious file. Also I'm getting an error of shutdown. I have attached the screenshot of the same. I have also recorded the video and its url is :
You may see it at 0:40 seconds. Later on when whole process get completed then I get an error of shut down "You shut down your computer because of a problem." Again and again I'm getting this error on every restart. If I'm somewhere wrong for any kext or any other thing for that, here is my EFI folder (https://drive.google.com/open?id=1k-MSKSHXK9TL3WOBPZj6O789jBau7kWx). Also I have attached my config.plist file. Audio is working, but didn't recognised the device. About this Mac is also showing details properly.
Please help me out it would be grateful and appreciated
I have a laptop HP EliteBook 840 G2 - Core i5 5300U - 2.3 GHz and graphic card intel HD5500 and installed a SIERRA , but the definition of the graphics card is not installed
OK, it's been a while since I posted something here. The new Catalina was out last month, the current version is 10.15.1. I decided to install on my HP Envy 13" Kaby Lake. This one should work for all Kaby Lake laptops out there and also with MOJAVE OS too. So read carefully and watch the videos.
1. You can't install Catalina on MBR unless you patch it, but it too complicated for me and I like to try the APFS system now instead of HFS. So, if you create the external USB drive using Boot Disk Utility, it won't install.
2. Replace original WIFI-Bluetooth COMBO with DW1560 or better.
3. Thanks to Lilu and people on Hackintosh world, things are much easier to install than before: Clover boot loader 5070, Lilu 1.3.9, Whatevergreen 1.3.4, AppleAlc 1.4.3, AirportBrcmFixup.kext, Bluetooth Patchram3 (I found BrcmPatchRAM3.kext + BrcmFirmwareData.kext + BrcmBluetoothInjector.kext), Hackintool is a must, VoodooPS2Controller.kext for trackpad, USBinjectAll , ACPIBatteryManager from rehabman, FakeSMC.kext.
4. Use a 1GB USB flash drive, use Boot Disk Utility to create an EFI folder, then copy it to the EFI folder of the External USB SSD hard drive.
I'll post more in details, but with these, you can boot Catalina without any problems.
Hi, I want to install MacOS Catalina on my laptop.
I was installed MacOS Mojave previously but i had a lot of problem, for example my wifi's card (Dell DW1820A) had a problem: My pc sometimes doesn't boot up or pc after some minutes crashed or slowed.
Now i want to try again to install macOS.
this is my spec:
CPU: i7 6500U with HD520
SSD: 500GB SSD Samsung
Wifi & Bluetooth: Dell DW1820A (Bluetooth: BCM2045A0) (Wifi: BCM94350ZAE)
Ethernet: Realtek 8100
Attached in this thread, my old clover configuration created by me (CLOVER OLD) and clover with Wifi driver (CLOVER) created by Hervè (I had asked help at insanelymac's community)
P.S SORRY FOR MY BAD ENGLISH.
Thanks in advance