Recently Browsing 0 members
No registered users viewing this page.
*** I have started another thread for installing Catalina on the Dell Latitude E6410. If you were thinking of installing Mojave, but would prefer to skip right to Catalina, click here. ***
*** I am no longer maintaining the installation files in this first post. Refer to my Catalina thread for the latest guidelines / files for installing macOS on this Latitude E6410 with Nvidia graphics ***
I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6. Everything works perfectly (including sleep). I'm starting this thread hoping to help others install Mojave on their E6410s. A brief installation guide is provided later in this first post. The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
My system is as follows:
Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961
Configuration items that may be different from what you have seen in other E6410 configurations
Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)
What is NOT working:
Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
What is NOT tested:
Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)
What IS working:
SLEEP IS WORKING! Everything else not mentioned above. Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar). Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP. Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader
Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files. The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
(Solution to this issue is to remove Device (PNLF) from the DSDT): Some users experience display issues. Solution is to remove Device (PNLF) from the DSDT. The attached DSDT currently still includes Device (PNLF), so you will need to edit the DSDT to remove PNLF. USB sleep/wake power IORegistry keys are no longer provided in IOUSBHostFamily.kext after High Sierra 10.13.6. Solution is to added SSDT-USBX.aml to EFI/CLOVER/ACPI/patched. The attached SSDT-USBX.aml includes USB sleep/wake properties for MacBookPro6,2 from High Sierra 10.13.6 IOUSBHostFamily.kext. Laptop does not sleep on lid close. Solution is to add Notify (LID0) code to Method (BTNV) in the DSDT. This is solved in the attached DSDT. Leaving this for historical purposes, but the CLOVER USBFix is no longer necessary after finding that I had incorrectly applied the DSDT _DSM patch for Device (EHC1). The CLOVER USBFix is not needed after fixing the DSDT.. AAPL,clock-id and device_type do not appear in IORegistry for EHC1. Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2. Thank you, @feartech, for this tip. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used. Switching to the "Refined ALPS TouchPad driver" is a big improvement. I've implemented and tested this on my system. The ALPS version of VoodooPS2Controller.kext mixes up a few keys. Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load. While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m). This AGPM method is discussed later in this thread. I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer). It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra. If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT). In the method, the expression If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS. I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS. While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17. Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system. There is no condition for "Darwin." The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc). The attached config hard-codes ACOS and OSYS values equivalent to those for Linux. Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port. This should be an internal USB port (portType=2). I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs. The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15. This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits. I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to SLPB Sleep / Wake does not work with the basic DSDT edits. I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/. The Clover boot arg should be changed to "darkwake=0" for reasons explained by @holyfield in this thread. Leaving this for historical purposes: LCD screen is blank when waking laptop by opening lid (screen is not blank when waking with power button). Solution is to add darkwake=8 to CLOVER boot args. Thank you @Hervé for this tip.
Brief Installation Guide:
Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN; Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD. When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext. Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions: ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys). Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application
Tips for Improved Performance (on this and other older systems)
System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"
If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes. On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update. The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot. This will usually fix the issue. If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.
In addition to those mentioned in this first post and in subsequent posts in this thread, much of this solution for the Latitude E6410 was made possible by the numerous contributions of @RehabMan. I hope he's doing well, wherever he is. Hopefully he has long since forgotten what a PIA I was (and still am) as I was (and still am) learning hackOS.
Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides you simplicity and flexybility, and lets you to avoid most of the tedious steps or problems of other simlar apps.
TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install your bootloader of choiche on the usb (or just leave it as is if you want to use it on a real Mac).
- Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
- It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
- You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
- Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
- 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
- Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
- Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
- No need to use Disk Utility. TINU can format your drive or partition for you.
- Integrated EFI partition mounter tool.
- Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
- Offers advanced features to customize your bootable macOS installer.
Features that are planned for future versions:
- Support for other languages, at least Italian.
(To sugegst a new feature please contact me on github)
- A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
- A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
- A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
Frequently asked questions:
Thread (english) on insanelymac.com:
Thread (italian) on insanelymac.com:
Thread (english-german) on hackintosh-forum.de:
Post on Reddit:
Facebook hackintosh help and beta testing (Italian only):
Contact me (project creator):
- Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
- email: email@example.com
- This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license.
- We (the project creator and othe people involved with active developmment) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
- We do not guarantee support to you, this is only an open source project, not a product released by a company!
- This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be.
- This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
- Apple for macos and installer apps and scripts
- People that helped me a lot:
Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.
- Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
- Thomas Tempelmann for help with the UI
- Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project
Here are also some screenshots inside this spoiler tab
Hi @chris1111 i have a tenda w311ma usb wireless adapter , i wanted to make it work with my catalina hackintosh so i installed the driver from the official site , the Rt2870driver.kext file and your wireless panel utility but i have a problem : The software dosent always connect to the acess points and when it does , and everything seems to be ok (even in network section of the system preferences ) when i go to safari for example it tells me that im not connected . I tried to connect the pc to my phone using hotspot , same problem in the pc it shows connected to network but in the phone the pc doesnt appear in the list of the connected devices . What to do ? Please help me !
I installed Niresh Mojave On it Every thing working expect Wifi when seen through Hacktool
I found it has a Pci Realtek 8723be
Its not working where as external mini usb wifi adapter is working
Please Help me to fix wifi Realtek 8723be PCIe wifi
Big Problem.., My Hack can not recognize my USB3 and no Bluetooth ....
I'm on High Sierra 10.13.6 (max with my NVIDIA GeForce GTX 970 CG 4070 MB)
- Rampage V + 5820K config
- 32G Ram
- GeForce GTX 970
- full of HD ssd
I am attaching my config.plist! and print my ktext screen ( I have to clean my room...)
Thank you for your help !!