Jump to content
Sign in to follow this  
Followers 0
pgsubuntu2

Safari y AppStore congelan completamente Hack

12 posts in this topic

Recommended Posts

Buenas a todos, Queria saber si a alguien le pasa algo similar a mi con la nueva version de Mojave o en general con otras versiones.

 

Recientemente pude instalar Mojave 10.14.2 previa preparacion con (esa app q todos sabemos pero q no me deja escribir aca). El sistema funciona bien luego de instalar los kext de audio y red desde (esa app que todos sabemos pero que no me deja escribir aca)

 

A medida que iba usando y testeando Mojave me di cuenta de esta falla y sucede solo cuando abro alguna pagina con Safari o tambien ahora descubro que sucede cuando abro Appstore y mientras hago alguna busqueda o simplemente hago scroll con el mouse se bloquea completamente el hack sin poder hacer absolutamente nada ni matar ninguna app. Ahi solo toca reiniciar.

 

Un ejemplo se da cuando abro esta misma pagina y aparece ese video en la esquina inferior derecha. Logre "solucionarlo" instalando Adblock pero en otras paginas vuelve a suceder ese cuelgue.

 

Mi pc:

 

Mother: GA-H81M-H

Procesador: Core i5 4460  - Video: Intel HD 4600

Kingston 8gb ram 1333

clover version 4769.

 

Aclaro que esto sucede en una instalacion limpia sin ningun plugin instalado de nada. 

 

 

Bueno cualquier otra info necesaria estoy a su disposicion, gracias.

 

 

 

 

Edited by pgsubuntu2

Share this post


Link to post
Share on other sites
Advertisement

Bueno si instalaste con esa aplicación, esto sobra:

Aclaro que esto sucede en una instalacion limpia sin ningun plugin instalado de nada

Dudo mucho que sea una instalación "limpia", hay suficientes maneras de crear un instalador para hacerlo sin recurrir a dichas aplicaciones e incluso para saltarse el check sobre Macs no soportados por Mojave 

Share this post


Link to post
Share on other sites

..o sea utilizando esas app para la instalacion junto a los kexts clasicos como fakeSMC, y los de audio y red. Nada mas que eso.. me referia a ningun otro plugin en safari por ej.

 

De todas maneras mi intencion de crear este post es tratar de encontrar la falla del problema y no armar un debate sobre que metodo de instalacion deberia ser el correcto salvo que la causa de la falla sea el metodo de instalacion elegido (aun no explore los demas metodos).

 

Saludos y gracias.

Share this post


Link to post
Share on other sites
On 12/11/2018 at 4:08 PM, pgsubuntu2 said:

Buenas a todos, Queria saber si a alguien le pasa algo similar a mi con la nueva version de Mojave o en general con otras versiones.

 

Recientemente pude instalar Mojave 10.14.2 previa preparacion con (esa app q todos sabemos pero q no me deja escribir aca). El sistema funciona bien luego de instalar los kext de audio y red desde (esa app que todos sabemos pero que no me deja escribir aca)

 

A medida que iba usando y testeando Mojave me di cuenta de esta falla y sucede solo cuando abro alguna pagina con Safari o tambien ahora descubro que sucede cuando abro Appstore y mientras hago alguna busqueda o simplemente hago scroll con el mouse se bloquea completamente el hack sin poder hacer absolutamente nada ni matar ninguna app. Ahi solo toca reiniciar.

 

Un ejemplo se da cuando abro esta misma pagina y aparece ese video en la esquina inferior derecha. Logre "solucionarlo" instalando Adblock pero en otras paginas vuelve a suceder ese cuelgue.

 

Mi pc:

 

Mother: GA-H81M-H

Procesador: Core i5 4460  - Video: Intel HD 4600

Kingston 8gb ram 1333

clover version 4769.

 

Aclaro que esto sucede en una instalacion limpia sin ningun plugin instalado de nada. 

 

 

Bueno cualquier otra info necesaria estoy a su disposicion, gracias.

 

 

 

 

Comparte tu carpeta de EFI/clover para tener una idea de los que estas haciendo y asi poder ayudarte. 
Recuerda,  en este foro no se te  podria ayudar si utilizas las herramientas de choni-mac. (si a eso te refieres con lo de "esa app")

Edited by camillionario

Share this post


Link to post
Share on other sites

No es cuestión de debates que esta todo mas que discutido ya y no hay vuelta de hoja, si haces una instalación limpia para arrancar te basta con un kext, luego ya gráfica, audio y red, no cuesta nada ver si falla algo o el que esta fallando o da conflicto con 4 miserables kexts a lo sumo, con esas aplicaciones vete a saber que llevas instalado, tu mismo: tu maquina, tu responsabilidad

Share this post


Link to post
Share on other sites

Cambie la carpeta CLOVER pero sigue igual, acá les muestro una captura q muestra dónde se estanca el sistema.

 

Creo que voy a tener q intentar otra instalación limpia distinta para ver si deja de congelarse el sistema.

 

Quiero aclarar que cuando instalo Adblock y bloquea el pop-up del video no se congela mas (en esta pagina).

 

20181218_094051.jpg

Edited by pgsubuntu2

Share this post


Link to post
Share on other sites

Hola:

Para empezar mira si la VRAM de la gráfica cuanto te pone.

Para continuar, te recomiendo que tal como te sugiere surfcaster trates de hacer una instalación limpia.

Lo ideal es hacerla así de esa manera porque tendrás el control de que le estas instalando a mayores y podrás quitar/cambiar kext cuando te falle algo y verificar si se soluciona o no.

No uso la herramienta de Tony pero creo que te instala los kexts en S/L/E

Existe un debate si los kext se deben instalar e S/L/E o en la carpeta Kext de Clover

Personalmente prefiero poner mis kext en ésta última, ya que de un simple vistazo puedo ver que tengo instalado.

 

Por otra parte tengo 4400HD y con Lilu, WhateverGreen lo tengo cubierto.

 

Captura de pantalla 2018-12-31 a las 0.00.07.jpg

Captura de pantalla 2018-12-31 a las 0.10.47.jpg

 

Verás que falta FakeSMC.kext porque estoy probando con VirtualSMC.kext que por razones ajenas al caso DE MOMENTO lo tengo instalado en S/L/E

Ya luego volverá también a la carpeta kext de Clover.

Edited by uzmi

Share this post


Link to post
Share on other sites
Posted (edited)

Buenas tardes. Tengo el mismo problema que pgsubuntu2 pero mi instalación es con una imagen de olarila y siguiendo este método de MaLdOn

https://olarila.com/forum/viewtopic.php?f=50&t=8685

Creo que mi VRAM esta bien.Parasubir.png.b3f265f12e00a07ac9683faf465854ca.png

 

Tendra Java algo que ver? He notado que tarda más en arrancar desde que la instalé.

Se agradece cualquier ayuda. Pongo también un archivo nvram.plist que hay dentro de mi partición EFI.

CLOVER.7z

nvram.plist

Edited by Tatocr

Share this post


Link to post
Share on other sites
Posted (edited)

Hola:

Le eche un ojo a tu carpeta y veo:

1) En el config.plist en Gui -- Custom Entries veo Sierra, Catalina, Mojave.

¿En cual se te congela? ¿En todas?

 

Mira lo que me pasaba con Mojave:

La única solución fue ponerle una dedicada, una Nvidia 650 Ti, la integrada no le alcanza.

 

2) Los kexts que usas son viejos.

Mira un poco mas arriba en este post y verás los que yo uso para la misma placa que tu.

Con Lilu y WhatEvergreen actuales ya no necesitas IntelGraphicsFixup.kext y menos NvidiaGraphicsFixup.kext si solo usas la integrada.

 

Te voy a subir mi carpeta Clover para esta misma placa, pero CUIDADO no es para sustituir por la tuya, está hecha para mi hardware/Bios especificamnete.

Es para que le eches un ojo.

 

Cualquier duda que tengas y pueda ayudarte, me avisas.

 

 

CLOVERh87m D3H.zip

Edited by uzmi

Share this post


Link to post
Share on other sites

Hola UZMI. Gracias por contestar. No te he respondido antes por que lo estaba testando después de actualizar Kext y eliminar IntelGraphicsFixup.kext y  NvidiaGraphicsFixup.kext, y efectivamente el problema se soluciono. Lo curioso es que en sierra no se congeló nunca. Sierra es super estable, por eso lo mantengo, y Catalina lo estoy mirando por curiosidad. 

 que algún día tendré que poner una gráfica, o actualizar el equipo entero, ya veremos.

Llevas muchos años ayudando a aficionados como yo. Gracias de nuevo amigo.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By verdazil
      This is not intended to be a complete and comprehensive installation guide. There are many installation guides on the forum and installing macOS is no different from installing on other desktop builds. Rather, this is supplemental information specific to the my hardware listed below. I hope you find this information useful and this will save you a little time.
       
      Hardware
      MB: Huananzhi X79-ZD3
      CPU: Intel® Xeon E5-2689, 1.2-3.6 GHz
      Chipset: Sandy Bridge-E Q65 (C600/C200)
      Memory: Samsung 4x8 Gb ECC/REG DDR3, 1866 MHz
      Video: Saphire Nitro+ Radeon RX 590
      Monitor: BENQ-BL2711U + LG TV 42LF650V
      SSD + HDD: NVMe M.2 Samsung 970 EVO 250 Gb + HDD Seagate 2 Tb
      WiFi: Fenvi FV-T919 BCM94360CD
      Mac model: MacPro6,1
      MacOS version tested: Mojave 10.14.6 (18G1012)
       
      What works?
      - Video: 4K x 60Hz on BENQ-BL2711U + Full HD x 60Hz on LG TV 42LF650V
      - Sound: audio jack + HDMI audio on both monitors
      - Wi-Fi (out of the box)
      - USB2 && USB3 ports
      - LAN
      - Bluetooth (out of the box)
       
      What does not work?
      - Sleep mode: not tested / I don't need
       
      BIOS Configuration, what's important:
      Bios Version: 4.6.5.4
      Legacy USB Support: [Enabled]
      XHCI Hand-off: [Enabled]
      EHCI Hand-off: [Enabled]
      USB Mass Storage Driver Support: [Enabled]
      Hyper-threading: [Enabled]
      Active Processor Cores: [All]
      Serial Port: [Disabled]
      Intel(R) VT-d : [Disabled]
      Launch CSM: [Enabled]
      Boot option filter: [UEFI only]
      Launch Storage OpROM policy : [UEFI only]
      Launch Video OpROM policy : [UEFI only]
       
      Here is what I used to install and configure the system:
      FakeSMC: make with Clover Builder https://github.com/Dids/clover-builder/releases Audio: https://github.com/vit9696/AppleALC Video: https://github.com/acidanthera/WhateverGreen/releases USB: https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads + PMHeart/DalianSky patches LAN: http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/ CPU Power management: https://www.insanelymac.com/forum/topic/324270-sandy-bridge-e-ivy-bridge-e-power-management-1013-appstore-release   Clover configuration:
      Clover version: v2.5k r5088
      You can get the configuration file and the necessary kexts from the link at the end of the message
      Note: you must insert your own SeralNumber && MLB && ROM && SmUUID in the config.plist file.
       
      How to use
      To make a bootable flash drive, you can use my EFI directory (link at the end of the message). Tested for Mojave 10.14.6 installation.
      https://drive.google.com/file/d/1tjbwuUWg_PlQCVt5PTRFG6HsNby_BcgN
    • By valueimagery
      Apologies ahead of time if this is in the wrong thread (please move to appropriate thread if necessary) as it applies to pre-installation and post-installation, Mojave and Catalina, motherboards, user preferences, but it's all related and I just had to get all this written down since it's all resolved...
       
      The issues:
      MOJAVE 10.14.6 2019 SECURITY UPDATE
      CATALINA 10.15.1 INSTALLER USB
      POST Mother Board UPDATE ISSUES
      UEFI Bootloader disappearing from BIOS boot menu/setup
      MAPS NOT WORKING/ CORRUPT USER/LIBRARY/CACHE
      GPT HEADER CORRUPTION AT BOOT
       
      This is my system which has worked flawlessly ever since 10.14.1 and automatic updates within the OS.
      10.14.6 iMac 18,3
      ASUS Rog Maximux X Code Bios v 2023
      Sapphire Nitro+ RX 580 Special Edition
      1 NVME System Drive, 1 x 1TB NVME Scratch Disk,  4 Internal 8TB HDD in raid 1+0, 4 x 3TB in a raid 5 setup with enclosure, 1 Backup System SSD, 1 2TB Time machine HDD (get to why I’m listing the drives later)
       
      Instead of making different posts for all of these issues that I’ve spent that past two weeks trying to solve (I almost gave up) I thought for anyone else out there experiencing one or any of the above issues you might find a solution in this thread.
       
      First let me say thanks to all the people out there in the various hackintosh communities (hackintoshers, tonymac, insanelymac, olarila, reddit) I researched every single one to find solutions for all these issues.
       
      Second, invest in Carbon Copy Cloner and make sure you make constant backups of your system drives.  Otherwise there would be no way to troubleshoot.
       
      So this all stemmed from not being able to update to Mojave 10.14.6 2019 Security Update released in November 2019.  
      My original post:
      Link removed:
      https://www.reddit.com/r/hackintosh/comments/e2naku/cant_update_mojave_to_security_update_2019001/
       
      There were plenty of different errors through troubleshooting:
      Kextdstall[1] (240s) ‘AppleACPICPU’
      or
      considerRebuildOfPrelinkedKernel com.apple.nke.webcontentfilter trigger rebuild
      or
      com.apple.xpc.launchd.domain.system
      <error>: Could not read path: path = /Library/LaunchDaemons, error=2: No suchfile or directory
      And
      IOG flags 0x3(0x51)

      IOConsoleUsers” gIOScreenLockState 3, hs 0, bs0, now 0, sm 0x0
      (The last two, still exist, but don’t stall/severely halt boot, and I’m not really sure if it’s an issue that needs to be addressed as I believe I’ve used the correct format of Device Properties to inject my framebuffer as a headless UHD 630 with 0x3E980003)
       
      Then once I managed to get past some of the installer stalls I always ended at “Installer resources were not found” prompting a restart and continuous loop cycle of no successful install.
       
      Then I tried making a bootable Catalina USB and couldn’t even install a fresh copy of 10.15.1 on a separate SSD.  Again getting errors in verbose mode that would stall and go no further.
       
      Then after cloning, and failing, and cloning and failing, changing bios settings, at some points my UEFI bootloader would completely disappear for my Samsung NVME 970 pro system drive.
       
      Was really getting frustrated, but was determined to fix it.  And here they are one by one in the order I Fixed them:
       
      Clover UEFI Bootloader Disapepared from Boot Menu
      So first I figured out what was going on with the UEFI bootloader disappearing.  I tried complete wipes of the APFS drive, Reinstalling Clover on the EFI partition.  Nothing.  Finally Found the solution here thanks to @chibabah
      Link removed:
      Tips:
      1)    If you have lots of connected drives use the Page Up and Page Down key to scroll through results of bcfg boot dump
      2)    Use Disk Utility or Terminal before hand to verify the exact UUID of your EFI system drive that has disappeared.
       
       
      Post Motherboard Update
      Now this seems to apply to a lot of people in the community who have updated and unknowingly couldn’t boot their system, or in my case, couldn’t update the current OS to the latest version.  This seemed to apply to my ASUS Maximus X Code v 2203.
      Thanks @mattystonnie for your ACPI patch found here:
      Link removed:
       
      Can’t Install fresh version of Catalina 10.15.1
      So after almost giving up on not getting the latest Mojave Security update, I wondered if Catalina would have the same issues.  Well it had different issues.
      Stall - Virtual IOReturn ionvmecontroller
      AppleACPICPU stalling
      Requiring EC device
      So I found this reddit thread thanks @dracoflar:
      https://www.reddit.com/r/hackintosh/comments/den28t/whats_new_in_macos_catalina/
       
      And applied the SSDTTime.command create by @corpnewt @noone @rehabman available here:
      https://github.com/corpnewt/SSDTTime
       
      The SSDT-EC.aml file it created from my DSDT.aml was the FINAL KEY in allowing the Catalina Installer to complete.
       
      Tips:
      1)    If you haven’t already created a SSDT before, for example a custom USB SSDT, it is placed in your EFI/Clover/ACPI/Patched/
      2)    In your config.plist under ACPI Check “AutoMerge” so that it is true.  This will automatically load any custom SSDT files from your patched folder.
       
      Apple Maps not loading
      This had been something that I had issues with before, more so with location services not working.  However, after several clones, and a succesful Catalina Install/User Migration, location services was fine, but Maps was a blank grey grid, couldn’t find an address, get directions, load satellite image.   Ended up being a corrupt User Library since other System Users had no issues using the application Maps.
      To fix this I used the following resources:
      https://appletoolbox.com/fix-corrupt-user-accounts-macos/
      1)
      Quit Maps
      Give Terminal Full Disk Access and the type:
      diskutil resetUserPermissions / `id -u`
       
      2)
      Deleting The Entire User Library Cache folder
      ~/Library/Caches
       
      3)
      Delete folder ~/Library/Containers/com.apple.Maps/
       
      4)
      Restart Mac.  All these caches and temporary folders will repopulated themselves and Maps should resume working.  
       
      Installing Mojave 10.14.6 2019 Security Update
      This by far is the craziest of them all.  Whether the above things I implemented to my EFI or config.plist actually played a part or not in it finally working I guess I’ll never know.  But it is finally solved.  Simply by unplugging all drives.  Appears to be an issue with real macs too:
      https://bartechtv.com/macos-could-not-be-installed-on-your-computer-error-when-installing-mojave-on-hackintosh/
      Link removed:
      Didn’t have to go the terminal route as some did in the tonymac thread above.
       
      So since I have A LOT of drives I simply turned off my external enclosure, physically unplugged by 2nd NVME scratch drive, and disabled the SATA connectors in the BIOS.
       
      Low and behold after two restarts the Security update completed without a hitch or stall.
       
      After install I re-enabled/ connected/turned on all my drives, an no issues.  
       
      This must be a Mojave issue as I didn’t need to do this when installing Catalina from a USB installer.
       
      GPT header corruption has been detected
      And lastly for anyone out there with an ASUS Maximus Motherboard that has updated to the latest BIOS.  There seems to be an issue with external drives plugged into the PC (mine is in the back USB C port)  During boot the PC can’t POST and forces user into setup.
       
      I know there is nothing wrong with the GPT partition as I’ve run multiple tests in windows and mac.  And it’s a known issue with other ASUS motherboard users:
      https://rog.asus.com/forum/showthread.php?114955-GPT-header-corruption
       
      Temporary Solution:
      Until a BIOS update addresses this, go to your BIOS settings
      BOOT\Boot Configuration
      And change the Boot Sector (MBR/GPT) Recovery Policy to “Auto Recovery”
       
    • By valueimagery
      Hello,

      Anyone else having issues with the latest security update 2019-001 10.14.6 for Mojave?

      Have never had issues updating since 10.14.2 in the past. But this once gets stuck on these last 4 lines:
      "
      Adding AGDP mode validate property
      iMac.local com.apple.xpc.launchd[1] (org.ntp.sntp.188) <Warning>: Servuce exited with abnormal code: 1
      considerRebuildOfPrelinkedKernel com.apple.nke.webcontentfilter trigger reguild
      Forcing CS_RUNTIME for entitlement: com.apple.rootless.install iMac.Local com.apple.xpc.launchd[1] (com.apple.displaypolicyd.200) <Warning>: Service exited with abnormal code: 1
      "

      The only way to boot is to force shutdown and overide boot from the system volume and bypass the Mac OS Install volume.

      Doing a bit of research from similar issues with users and security updates most boot problems are caused/resolved by fixing:

      Location of Kexts (virtualsmc in Clover's "/kexts/Other/", latest kexts installed with ##### in L/E/ with cache updated by Kext utility)
      The Injection of Kexts (i've tried both detect and inject = yes)
      Mismatched Kext (fakesmc + virtual smc both in use, which they are not)
      A bad config.plist (works booting the normal system voluem, i've attached)
      A graphic injector issue (currently using iMac18,3 + RX580 with the UHD630 in a headless state)
      Multiple Drivers Folder - The old clover /driversuefi64/ folder present and conflicting with the latest /drivers/uefi/ folder (only /drivers/uefi/ present)

      The only thing that is different from this update than previous updates is that I transitioned to VirtualSMC from previously using FAKESMC/ FAKESMCsensors kexts with previous Mojave releases.

      I uninstalled the FAKESMC and all the sensors kexts using terminal and the following command and can confirm they are not present in the Clover "other folder" or the /L/E/ folder.
      sudo rm -rf /Library/Extensions/".....".kext

      After transitiong to VirtualSMC I did read with the readme that the VirtualSmc.efi should be placed in the /drivers/UEFI/ folder in clover. So I have added that to the EFI/CLOVER/DRIVERS/UEFI/ folder manually. Can anyone confirm if this is necessary?

      I've attached my config.plist file and screenshots of the verbose readout stalling as well.

      Any guidance would be great!


      KEXTS I'VE INSTALLED IN /L/E/:
      WhateverGreen.kext
      VirtualSMC.kext
      USBInjectAll.kext
      SMCSuperIO.kext
      SMCProcessor.kext
      Lilu.kext
      IntelMausiEthernet.kext
      BrcmPatchRAM3.kext
      BrcmFirmwareRepo.kext
      BrcmBluetoothInjector.kext
      AppleALC.kext
      AirportBrcmFixup.kext
      configNOSN.plist


    • By tonyx86
      I was inspired by @duduclx post here for installing El Capitan on a Dell Latitude E6410, so I decided to install Mojave 10.14.5 and subsequently 10.14.6.  Everything works perfectly (including sleep).  I'm starting this thread hoping to help others install Mojave on their E6410s.  A brief installation guide is provided later in this first post.  The interested reader is encouraged to read the other posts in this thread to see how this solution evolved and to learn additional tips/details not provided in this first post (including dual-booting with macOS and Windows).
       
      My system is as follows:
      Dell Latitude E6410 (I7-620m, Nvidia 3100M, 8GB DDR3, 512GB SSD, 1440x900 display, BIOS: A17) MacOS: Mojave 10.14.6 (APFS) (Patched with DosDude Mojave Patcher 1.3.3) MacModel: MacBookPro 6,2 (LPCB._DSM.Name "pci8086,3b09") Kexts: Lilu 1.3.6, VoodooHDA 2.9.2, AirportBrcmFixup 2.0.0, IntelMausiEthernet 2.4.1d1, ACPIBatteryManager 1.90.1, BrcmPatchRam2.kext, BrcmFirmwareRepo.kext, VoodooPS2Controller (the "Refined ALPS Touchpad" version - release 6 developed by @Dr. Hurt and compiled by @bronxteck), not the original version), USBInjectAll (with custom SSDT-UIAC), VoodooSDHC.kext (configured as shown here). Wi-Fi: Broadcom BCM 94352HMB (with AirportBrcmFixup.kext) CLOVER (Legacy): R4961  
      Configuration items that may be different from what you have seen in other E6410 configurations
      Addition of _OFF and _ON methods to _PTS and _WAK methods respectively (to control discrete graphics in order to enable sleep/wake) LPCB._DSM patched with device-id "3b09" AND "name", "pci8086,3b09" for native Nehalem power management with MacBookPro 6,2 ECDV renamed to EC so that AppleBusPowerController loads AGP.VID._DSM patched with device-id "0a29" so that AppleGraphicsPowerManagement loads No CLOVER Generate P or Generate C States (with the correct LPCB._DSM and MacBookPro 6,2, these CLOVER options are unnecessary for this architecture and only limit max multiplier and reduce number of P states) DSDT patched to include HDAU device (device-id 0x0be3)  
      What is NOT working:
      Display brightness can be controlled with keyboard keys, but cannot be controlled with slider in Display settings. Graphics Power Management - AGPM loads (because 10de,0a29 device is injected), but there's no evidence that 3100m frequency and voltage is changing.
        What is NOT tested:
      Smartcard Reader eSata (I have this disabled in my BIOS) Firewire Port (it does appear in the Network settings, just haven't tried it) Microphone Jack PC Card Slot (I have this disabled in my BIOS)  
      What IS working:
      SLEEP IS WORKING! Everything else not mentioned above.   Speedstep/CPUPowerManagement is perfect, system temps are low, CPU multiplier operates as expected, battery life is long Shutdown is fast Display/graphics acceleration is perfect (thanks to DosDude's Mojave patcher) Brightness (adjusted with brightness keys on keyboard) works perfectly Battery Manager works (battery status is displayed in menu bar) simply by installing ACPIBatterManager.kext. Wi-Fi (after changing to Broadcom BCM94352HMB and installing AirportBrcmFixup.kext) Audio (volume adjustable, volume indicator appears in menu bar).  Switched to VoodooHDA from AppleALC after AppleALC caused slow boot due to "IOHDACodecFunction timeout." Ethernet port (with IntelMausiEthernet.kext) Broadcom BCM20702A0 Bluetooth (with BrcmPatchRam2.kext and BrcmFirmwareRepo.kext) Optical Drive External VGA (with corrected NVCAP.  Need NVCAP 04000000 00000100 0E000000 00000007 00000000 (credit: here) for working external VGA display. Headphone jack Display Port (tested using DP > HDMI adapter) Camera SD Card Reader  
      Known issues and their solutions (These issues have all been resolved, with the solutions incorporated into the attached config files.  The issues are listed here for historical purposes and no further work is needed unless stated otherwise).
      AAPL,clock-id and device_type do not appear in IORegistry for EHC1.  Solution is to use CLOVER on-the-fly patching/fixing/renaming for EHC1 and EHC2. ALPS trackpad performance is not good with the "standard" VoodooPS2Controller.kext that I initially used.  Switching to the "Refined ALPS TouchPad driver" is a big improvement.  I've implemented and tested this on my system.  The ALPS version of VoodooPS2Controller.kext mixes up a few keys.  Need to switch the Command and Option keys (System Preferences > Keyboard > Modifier Keys) and change keyboard type to ISO European. This configuration (captured in the attached config files) uses an injected device-id (10de,0a29) for NVidia 3100m to get AGPM to load.  While I haven't observed any performance differences, a better approach may be to inject AGPM properties for device 10de,0a6c (the actual device-id for the 3100m).  This AGPM method is discussed later in this thread.  I have briefly tested this "FakeSMC.kext method" for injecting AGPM attributes without any noticeable changes in laptop/graphics behavior. IOHWControl is not loaded under AGPM (Should be AGP > VID > NVDA,Display-A@0 > NVDATesla > AGPM > gpu-control > IOHWControl as viewed in IORegistryExplorer).  It is loaded on a real MacBookPro6,2 running Mojave and is loaded on this Dell Latitude E6410 running High Sierra.  If I "Inject NVidia" via CLOVER, IOHWControl loads properly. The Dell Latitude DSDT (BIOS A17) has a bug in Method (GNOT).  In the method, the expression  If (LOr (LGreater (OSYS, 0x07D0), LLess (OSYS, 0x07D6))) always evaluates to TRUE, so the patched DSDT has no dependency on the value of OSYS.  I suspect that LOr should be replaced with LAnd, so that this expression is TRUE for variants of Windows 2001 and False for any other OS.  While this may have no affect on MacOS, it makes one wonder how such an obvious bug made it through Dell QA and is still present in BIOS A17.  Also makes one wonder whether the sleep problem (which no one has solved) was fixed in Windows to address another DSDT bug. The assigned value of ACOS and OSYS in the DSDT are conditional on the operating system.  There is no condition for "Darwin."  The solution is to add a condition for "Darwin" (making it equivalent to one of the defined operating systems (e.g. Linux, Win7, etc).  The attached config hard-codes ACOS and OSYS values equivalent to those for Linux.  Another way to handle this (different from the method employed in the attached config files) might be to override _OSI with XOSI (defined in a custom SSDT). The portType of the Internal Bluetooth device is portType=0 which, according to Rehabman's comments in SSDT-UIAC-All.dsl, is an external USB 2 port.  This should be an internal USB port (portType=2).  I learned through trial and error that the HUB1 and HUB2 definitions in Rehabman's SSDT-UIAC-ALL.dsl apply to the ports on the EHCx USB hubs.  The solution is to include the HUB1 definition in SSDT-UIAC.dsl and change portType to 2 for HP15.  This change doesn't appear to affect/fix sleep, but it may prevent instant wake if we get sleep working. There are minor differences between a real MacBookPro6,2 IORegistry dump and this HackBookPro6,2 IORegistry dump that can be resolved with simple DSDT edits.  I am now running with these changes, but haven't found these changes to make any difference in operational behavior.
      Rename Device (AC) -> Device (ADP1) Remove UID from Device (HPET) Add compatible ID "PNP0C01" to Device (HPET) Change ADP1:_STA from 0x0F to 0xFFFFFFFF Enable Ambient Light Sensor and renamed to Device (ALS0) from Device (ALS) Add compatible ID "smc-als" to ALS0 Rename LID -> LID0 Change "name" definitions to Buffers in _DSM methods Rename Device (PBTN) to PWRB Rename Device (SBTN) to (SLPB) Change HDAU.hda-gfx from "onboard-1" to "onboard-2" Change GFX0.hda-gfx from "onboard-1" to "onboard-2" Sleep / Wake does not work with the basic DSDT edits.  I have discovered that Sleep / Wake can be made to work by adding discrete graphics _OFF and _ON methods to _PTS and _WAK methods respectively (borrowed the concept and code from a working E6430 DSDT: Credit here: https://osxlatitude.com/forums/topic/9248-working-sleep-on-intel-hd-and-nvidia-nvs-on-dell-latitude-e6430-optimus-enabled-or-disabled/page/6/.  
      Brief Installation Guide:
      Configure BIOS (version A17) as follows (leave default unless listed here): Boot Sequence: USB, Internal HDD, CD/DVD, Modular Bay HDD; Boot List Option: Legacy; Integrated NIC: Enabled; Parallel Port: Disabled; Serial Port: Disabled; SATA Operation: AHCI; Misc Devices: Enable Modular Bay, Camera, External USB, Microphone, Media Card and 1394; Latitude ON Reader: Disabled; Keyboard Illumination: Auto ALS and Input; Ambient Light Sensor: Enabled; OROM Keyboard Access: Disable; TPM Security: Disable; Computrace: Deactivate; CPU XD Support: Enable; Performance: Enable all options; Power Management: Disable Wake on AC, Disable Wake on LAN/WAN, Express Charge: Standard, Charge Behavior: Enabled; Keypad: Fn Key Only; Mouse/Touchpad: Touchpad/PS-2 Mouse; USB Emulation: Enable Legacy; Fn Key Emulation: Disabled; Fastboot: Thorough; Virtualization: Enable Intel Virtualization, Disable VT for Direct I/O, Disable Trusted Execution; Wireless Switch: Bluetooth and WLAN; Wireless Device Enable: Bluetooth and WLAN;  Create your MacOS installer USB (Use DosDude's Mojave Patcher for Mojave) (start with High Sierra and not Mojave if you're new to hackintosh). Install CLOVER (Legacy) on installer USB using attached EFI as your guide for patched ACPI, kexts and config.plist Install MacOS to your SSD.  When you run DosDude's Mojave Patcher, DO NOT install LegacyUSBInjector.kext - you're going to use Rehabman's USBInjectAll.kext.  Also, do not install the DosDude SIP kext (you're using CLOVER to manage SIP). Install the following kexts in /Library/Extensions:  ACPIBatteryManager.kext, AirportBrcmFixup.kext, BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakeSMC.kext, FakeSMC_ACPISensors.kext, FakeSMC_CPUSensors.kext, FakeSMC_GPUSensors.kext, FakeSMC_LPCSensors.kext, IntelMausiEthernet.kext, Lilu.kext, USBInjectAll.kext, VoodooPS2Controller.kext (the "Refined ALPS Touchpad driver," not the original), VoodooSDHC.kext (configured as shown here). Switch Command and Option keys to compensate for Refined ALPS driver issue (System Preferences > Keyboard > Modifier Keys).  Also change keyboard type to ISO European to fix the [ ` ~ ] key (to the left of the "1" (one) key. Install VoodooHDA Install HWMonitor application  
      Tips for Improved Performance (on this and other older systems)
      System Preferences > Spotlight > Search Results: Uncheck all options System Preferences > Spotlight > Privacy: Add all Volumes System Preferences > Accessibility > Display: Check "Reduce motion" System Preferences > Accessibility > Display: Check "Reduce transparency"  
      Other tips
      If your fan is always running and temps are good, try pressing Fn + z After applying Mojave updates, HWMonitor may not display discrete graphics attributes.  On systems with multiple displays, a second (or third display) may not be active after applying the Mojave update.  The solution to this is to run "sudo kextcache -i /" (in a terminal window) and reboot.  This will usually fix the issue.  If the issue is not fixed, run DosDude's Post Install Utility, apply the Legacy Graphics Patch, reboot and then run "sudo kextcache -i /" if necessary.

      E6410.zip
    • By ezyrdr
      hallo hallo!
      I've been here on since snow leopard days, but still, im less than a rookie when it comes to hackintoshing! im just format it, copy it, install it dude-like! ahajajahaa sorry but I've been gettin this arb_buffer not present in my whatevergreen or don't know what OpenGL driver...steam games like Dying Light aren't playable since mojave 14.2 (no video, black screen) and several other opengl apps wont behave correctly at all...soo i only got you people to givme any idea of what am i doin wrong here with my installation, cause i got latest whatevergreen, as you could see from the capture im sending ... maybe i should go for a better video card?? i was thinkin buying a RX 590 8GB from Sapphire would kinda do de trick...but if a got a prob with my installation, most likely not uh!? ahaaja well thats from me for now, hope you guys are havin it this holidays with fam & loved ones, and are safe & witta rockin piece of hackintosh to play around with catalina, which is pretty cool system for me right now!
      HAPPY HOLIDAYS EVERYONE & BE SAFE!!!    ~_^

      ~edit~
      maybe i misconfigured ATI enabling in CloverEditor over the config file?!
×