Jump to content
telepati

RX560 I am losing my display while using it?

12 posts in this topic

Recommended Posts

I really need help 'cause I really don't know what's going on. When I am using my Hackintosh, for example, I am using for 5 days without any problem and suddenly I am losing my screen while using it and turns different colors. This is not happening all the time but suddenly screen turns full of grey and no cursor. This grey looks like apple installer background greyish. But this doesn't mean it turns each every time grey sometimes turn blue sometimes green. I really don't get it why this happening. When this happening I am making force restart from the case. This problem started after installing Mojave. I never faced of this type of screen error in High Sierra. I also tried on windows and dont get any error.

I updated all kexts with the latest versions but it doesn't help. I removed all SSDT and add DSDT (which @MaLd0n created) it doesn't help either. I checked my Ioreg but doesn't seem anything wrong. Getting full acceleration from RX560. I disabled and enabled IGPU from BIOS it doesn't help either. I also tried to pull off the HDMI cable and pull back when this happening nothing changed still full grey. 

 

I attached my all files.

Here is some picture of the error. A very long time I didn't get blue or green screen error but I pictured it when turned blue.

 

IMG_0464.jpg.19fccae5c9140036f357e5177ee5e323.jpg

 

Very long time didnt get blue screen.

 

1.jpg.9da56273bd892ec32e482f36702409b1.jpg

 

2.png.18547799df4a5a89cd11b277a4acc699.png

 

debug_1712.zip

 

Edited by telepati

Share this post


Link to post
Share on other sites
Advertisement
8 hours ago, MaLd0n said:

use only my clover folder

CLOVER.zip

don't need any ssdt, u have a collection

check CSM option in bios

enable IntelHDGraphics in bios

 

is CSM must be enabled or disabled don't get it?

Share this post


Link to post
Share on other sites
3 hours ago, MaLd0n said:

enable only if u use multi monitors

 

I am not using multi-monitor. I have only one display. Thank you, I'm going to test it and let you know how it goes.

Share this post


Link to post
Share on other sites
On 11/21/2018 at 6:20 PM, MaLd0n said:

use only my clover folder

CLOVER.zip

don't need any ssdt, u have a collection

check CSM option in bios

enable IntelHDGraphics in bios

 

USB 3.0 Flash Drives doesn't work. When I connect my USB 3.0 Flash Drive to the Hack nothing happening. Just USB 2.0 working.

Share this post


Link to post
Share on other sites
30 minutes ago, telepati said:

 

USB 3.0 Flash Drives doesn't work. When I connect my USB 3.0 Flash Drive to the Hack nothing happening. Just USB 2.0 working.

patch don't work more, u need other way, u can check here

https://olarila.com/forum/viewtopic.php?p=65287#p65287

Share this post


Link to post
Share on other sites
45 minutes ago, MaLd0n said:

patch don't work more, u need other way, u can check here

https://olarila.com/forum/viewtopic.php?p=65287#p65287

 

Thanks but problem is there is no any SSP in the ioreg I think this is DSDT related.

 

I discovered my port before; These are all included ports. If I add these ports to the boot argument SS port will show again or? 

 

HS01  // HS Case USB3 Front Right

HS02  // HS Case USB3 Front Left

HS05 // HS Case USB3 Rear Middle Right

HS06 // HS Case USB3 Rear Middle Left

HS09 // HS Case USB2 Rear Top Right

HS10 // HS Case USB2 Rear Top Left

HS12 Inside Left// Bluetooth

SS01 Case Front Right

SS02 Case Front Left

SS05 Middle Right

SS06 Middle Left

 

2014577798_ScreenShot2018-11-23at22_25_36.png.05ea654ff13c0dd905b151864c9c90a6.png

Edited by telepati

Share this post


Link to post
Share on other sites
1 hour ago, telepati said:

 

Thanks but problem is there is no any SSP in the ioreg I think this is DSDT related.

 

I discovered my port before; These are all included ports. If I add these ports to the boot argument SS port will show again or? 

 

HS01  // HS Case USB3 Front Right

HS02  // HS Case USB3 Front Left

HS05 // HS Case USB3 Rear Middle Right

HS06 // HS Case USB3 Rear Middle Left

HS09 // HS Case USB2 Rear Top Right

HS10 // HS Case USB2 Rear Top Left

HS12 Inside Left// Bluetooth

SS01 Case Front Right

SS02 Case Front Left

SS05 Middle Right

SS06 Middle Left

 

2014577798_ScreenShot2018-11-23at22_25_36.png.05ea654ff13c0dd905b151864c9c90a6.png

the problem is limit, 15 ports

if u exclude some HSxx, SSxx start appears

Share this post


Link to post
Share on other sites
On 11/24/2018 at 12:23 AM, MaLd0n said:

the problem is limit, 15 ports

if u exclude some HSxx, SSxx start appears

 

Thank you MaLd0n after excluding unused ports all working ports came. :thumbsup_anim:

 

296434432_ScreenShot2018-11-25at18_17_29.png.921ad791219a97f9115d73f83c00c260.png

Share this post


Link to post
Share on other sites

@MaLd0n my main problem still continues. 1 hour ago screen turned grey again while watching video on Safari. I didn't change any files from last you are created. I am really dont know how should I diagnose this problem. Where should I look after force restart?

 

I do this but I am not sure this is the correct way to diagnose the problem. After force restart, I go to console app and look the system log before boot;

 

Jan 12 00:21:29 Murats-Mac com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): Unknown key for integer: _DirtyJetsamMemoryLimit
Jan 12 00:22:01 Murats-Mac com.apple.xpc.launchd[1] (com.apple.WebKit.Networking.D039F2D0-2BF6-4924-8F8C-08A39D35F183[935]): Service exited with abnormal code: 1
Jan 12 00:25:27 Murats-Mac xpcproxy[955]: libcoreservices: _dirhelper_userdir: 529: bootstrap_look_up returned (ipc/send) invalid destination port
Jan 12 00:25:27 Murats-Mac com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): Unknown key for integer: _DirtyJetsamMemoryLimit
Jan 12 00:27:53 localhost bootlog[0]: BOOT_TIME 1547242073 0

I am really don't know what should I do? I thought maybe the problem is my graphics card but used windows all day and I didn't get any problem on that.

 

Here are my latest problem report files. In ıoreg, all Graphics looks ok, USB ok, your DSDT ok, CPU looks ok all power management looks ok but I am still getting this problem.

 

Problem Reports Files.zip

 

Share this post


Link to post
Share on other sites
15 hours ago, telepati said:

@MaLd0n my main problem still continues. 1 hour ago screen turned grey again while watching video on Safari. I didn't change any files from last you are created. I am really dont know how should I diagnose this problem. Where should I look after force restart?

 

I do this but I am not sure this is the correct way to diagnose the problem. After force restart, I go to console app and look the system log before boot;

 


Jan 12 00:21:29 Murats-Mac com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): Unknown key for integer: _DirtyJetsamMemoryLimit
Jan 12 00:22:01 Murats-Mac com.apple.xpc.launchd[1] (com.apple.WebKit.Networking.D039F2D0-2BF6-4924-8F8C-08A39D35F183[935]): Service exited with abnormal code: 1
Jan 12 00:25:27 Murats-Mac xpcproxy[955]: libcoreservices: _dirhelper_userdir: 529: bootstrap_look_up returned (ipc/send) invalid destination port
Jan 12 00:25:27 Murats-Mac com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): Unknown key for integer: _DirtyJetsamMemoryLimit
Jan 12 00:27:53 localhost bootlog[0]: BOOT_TIME 1547242073 0

I am really don't know what should I do? I thought maybe the problem is my graphics card but used windows all day and I didn't get any problem on that.

 

Here are my latest problem report files. In ıoreg, all Graphics looks ok, USB ok, your DSDT ok, CPU looks ok all power management looks ok but I am still getting this problem.

 

Problem Reports Files.zip

 

idk about it, need investigate

some acpi error fixs

DSDT.aml.zip

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×