By Majed DH
I have HP 15-da0xxx series laptop. i got macos mojave installed on it. but I was trying to get my intel graphics working but i couldn't change dmvt preallocation.
So I updated the bios (unfortunately). And since then i could not boot any version of clover.
I tried two versions that were working and even an installer that worked before is not working:
I searched alot about the error and found nothing relared to macos or hackintosh.. would it be solved by patching the dsdt?
Any suggestions people ?
Just changed my CPU to a E5450 to be able to Run Mojave , but now I can not run not even EL Capitan (it was working well with CORE2DUO)
I already flashed a modified bios to be able to recognise the CPU.
here some print screens from Verbose :
AZUS P5K PRO - CPU E5450 - NVIDIA 9600GT - 5G RAM
ANY HELP is APPRECIATED
I'm trying to boot MacOS on a Chromebook without UEFI. I'm stuck at getting the bootloader (Chameleon/Clover) to work.
My setup / context:
I have an Acer Chromebook Spin 13.
2 x USB-C 1 x USB-A 3.0 MicroSD Slot No USB A 2.0 (I've read that Clover has problems with USB 3.0) Firmware:
There's no UEFI firmware available and by default, it doesn't even allow booting anything other than ChromeOS. Thanks to MrChromebox (big shoutouts!), I flashed a custom legacy bios that allows me to boot anything linux related. This bios is flashed into the RW_LEGACY section of the existing bootloader (coreboot afaik) and doesn't have any configuration options. If I have to change a setting, I could try compiling his bios payload myself with the specific setting enabled.
What I've tried so far:
Only selected setting was "Install chameleon on the chosen path", rest was unselected.
1 - Install chameleon first without restoring the basesystem:
> boot0: GPT
> boot0: done
(hangs; pressing power button once shuts down
Chameleon installation log is attached as "Chameleon_Installer_Log_BEFORE".
2 - Install Chameleon after restoring the base system:
> boot0: GPT
> boot0: GPT
> boot0: doneboot1: /boot <- Exactly like that, no line break in between
(hangs; pressing power button once shuts down)
I haven't been able to reproduce #2 after wiping the drive and doing the same thing again. Subsequent attempts have resulted in either #1 of either Chameleon or Clover.
Chameleon installation log is attached as "Chameleon_Installer_Log_AFTER".
I tried multiple settings and configurations, but all of them boiled down to either one of these.
1 - Doesn't do anything, just hangs at "Booting from usb..."
2 - Boots into the blue/grey mode as shown in the attached images.
According to MrChromebox, this could be an old Tianocore DUET It doesn't detect anything (cpu frequency, ram, partitions or disks)
I've read pretty much every article, github readme and other types of documentation for coreboot, tianocore, clover, chameleon and MrChromebox' rw_legacy payloads and right now, I'm totally clueless as to what to try next...
A few questions that came up:
Why does chameleon hang? What is it looking for, /boot was clearly written to the disk by the Chameleon installer? What exactly is the blue/grey image? According to MrChromebox, it could be Tianocore DUET Where does it come from? Clover? The mainboard itself? Why does the blue/grey thing not detect my processor frequency or any partitions/drives? Can I use some sort of DUET bootloader to chainload Clover?
If you guys could answer any of them or if you have any other guesses or information as to what's happening, I'd be really happy!
Hi! I have a problem with 10.14.4 on booting stage (photo).
MOBO: Z390 MAG Tomahawk
GPU: RX 580 Nitro+
RAM: Corsair Vengeance LPX 3000MHz 16CL
I've updated every kext and driver (clover version too) and only difference is that I don't have lines informing about not loading kexts (common issue here as I see).
Thanks for accepting
I recently installed Sierra and I encounter the following problem ... When I restart or I start up my machine return to BIOS. If anyone knows and can any help be valuable Thank you very much. (When I boot from a Capitan disk in the same machine all is running well.) Both discs with Clover in Legacy mode.
gigabyte z68x-ud5-b3 F8
GT 620 ( την βλέπει κανονικά χωρίς Web drivers)
16 GB ddr3 1600