Finally I finished the installation of 10.14.6 on my Dell E5440. Everything works just fine, but HDMI will not work. Every time I plug it in, it causes a grey screen on my laptop monitor. Also on boot up. I attached my EFI Folder, maybe someone can help me. I searched a bit and read something about Azul Framebuffer Kext.
Thank you for helping.
By Amit Meena
This card is working OOB, but it has some graphical issues as per attachments.
If someone has a solution please share.
after years I come back to Hackintosh. In the early days I played with ozmosis and my good old 4700k. Now I'm back and worked around a 100% working setup with enough power to get me through all my tasks like audio, video cut etc.
In this short tutorial I will guide you through BIOS Settings and give you access to my EFI Folder. This I do because I haven't found anything on the web for my setup. Maybe it will help some of you. When you follow the steps you will have a perfect running Hackintosh like I do have now
I've chosen the iMac 18,3 because of the easy integration of both Graphic Units and the support of HEVC.
CPU: Intel i7 9700k (Overclocked in Bios to 4,7 GHz)
SMBIOS: iMac18,3 (Because of Dedicated Graphics and HEVC Intel Support)
RAM: 32GB G.Skill Trident Z RGB DDR4-3200 DIMM CL16 (XMP Profile to 3200MHz)
Motherboard: MSI MPG Z390 GAMING PRO CARBON (MS-7b17) <- It's the model without WLAN/Bluetooth
Graphic Card: Sapphire RX580 Nitro+
Bluetooth & WLAN: Broadcom Card in PCI Adapter
What is working:
Almost everything! All USB Ports, Intel Power Management, Bluetooth, WLAN, LAN, Intel Graphics HEVC, Boot/Reboot, Sleep
What is not working:
Facetime & iMessage (Don't need it but I will come back to this)
1. Create Mojave 10.14.5 USB Drive | https://www.youtube.com/watch?v=9CZDXxKfodE&t=95s | Us this tutorial or search the forum
2. Load my EFI Folder: https://workupload.com/file/zkJ4zdQk
3. Go into your bios and use my settings in the Screenshot I attached
4. Boot from USB Stick | Install Mojave | Boot into Mojave (Check other Tutorials if you don't know how)
5. Generate Serials with Clover Configurator
6. Happy Hackintosh Life!
Kext I use:
AppleALC.kext | Needed for Sound
BrcmFirmwareData.kext | Needed for my WLAN/Bluetooth Card
BrcmNonPatchRAM2.kext | Needed for my WLAN/Bluetooth Card
BrcmPatchRAM2.kext | Needed for my WLAN/Bluetooth Card
CodecCommander.kext | Fix Problems after Sleep
CPUFriend.kext | Perfect Power Management for my CPU
CPUFriendDataProvider.kext | Perfect Power Management for my CPU
FakePCIID_Broadcom_WiFi.kext | Needed for my WLAN/Bluetooth Card
FakePCIID.kext | Needed for my WLAN/Bluetooth Card
FakeSMC.kext | Standard
IntelMausiEthernet.kext | Ethernet
Lilu.kext | Standard
USBInjectAll.kext | To fix all USB Ports
WhateverGreen.kext | Needed for graphics
If you have success with my little tutorial and EFI Build let me know! Hope you reach the desktop and will be happy!