Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By jamesxxx1997
      Hi everyone~
      My machine is thinkpad x1 yoga 2018 , uhd620 , WQHD resolution , with macos 10.14.6 installed.
       
      My efi patch seems to have some problems related improper graphic patch.
      1. The screen sometimes have flickers , especially on safari browser.
      2. Sometimes kernel panic happens after wake from sleep , black screen then reboot.
      3. I cannot enable specific resolution(1920*1080) in hidpi , using hackintool or FixEDID+DarwinDumper
       
      Any help is appreciated , thanks~
       
       
       
      28525.zip
    • By soumaxetuirk
      If you have a working Brightness Slider and you might be using Brightness slider or manual hotkeys to control brightness then this guide may help you to use your Native hotkeys of laptop.
       
      (All the Credits goes to @RehabMan     For OS-X-ACPI-Debug Kext and DSDT Patches.)
       
       
      This step assumes that you are using RehabMan's VoodooPS2Controller
      Install the kext: https://github.com/RehabMan/OS-X-ACPI-Debug Open MaciASL and click on patch.(Add rehab man repo) Apply "Add DSDT Debug Methods" and "Instrument EC Queries" that are under Brightness Fix. Save the DSDT and restart Look in Syslog as you press the key corresponding to brightness to determine which _QXX methods handle the keys (UPDATE: From Sierra Apple changed logging process. So you won't find ACPIdebug result using syslog command. Instead use following command )
      log show --last 5 | grep ACPIDebug 6. Then patch DSDT:
      into method label _Q1D replace_content begin // Brightness Down\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0205)\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0285)\n end; into method label _Q1C replace_content begin // Brightness Up\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0206)\n Notify(\_SB.PCI0.LPCB.PS2M, 0x0286)\n end; Change the variable _Q1D/_Q1C as per the log. 

      7. Try compiling and check if it generates errors
      8. If it does, then change the PS2M to PS2X according to the one found in your DSDT
      9. Save and place the compiled DSDT.
      10. Now you should see that you have your corresponding keys to change your brightness 
       
       
       FOR  more detail and Queries,Check Out original Post of @RehabMan Here;
      http://www.insanelym...18#entry1997112
      Get Latest Version of  OS-X-ACPI-Debug kext here:
      https://bitbucket.org/RehabMan/os-x-acpi-debug/downloads
    • By plasticduck35
      I have a hackintosh running 10.13.5 (High Serria) that works except it doesn't shutdown properly and it doesn't seem to be going to sleep. 
       
      Here are some diagnostics that I gathered 
       
      Davids-MacBook-Air-2:~ davidozersky$ sudo pmset -g Password: System-wide power settings: Currently in use: hibernatemode 0 womp 0 networkoversleep 0 sleep 5 (sleep prevented by diskmanagementd, UserEventAgent, mds, diskarbitrationd, coreaudiod, mds_stores, Disk Utility) Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage disksleep 10 displaysleep 5  
      And I've attached files from a RunMe utility app I've found online. 
       
       
      Any ideas? 
       
      Thank you, 
      David
      runmereport.ioreg
×