Jump to content

2 posts in this topic

Recommended Posts

SleepOnLowBattery (“SOLB”)
by BugsB, based on a script by Toggi3 * + more code snippets from the www

 

For those of us whose HackBook/ MacBook does not go to into power saving mode automatically on very low battery but just powers down coldly: “SOLB”, a small and low load footprint AppleScript based utility that checks the battery level every 2 minutes. You can choose between two versions, either with or without sound. Both display a notification in the top right of your screen.

 

Between ≤10 and >8% battery charge:

GmZS1aW.jpg

 

Between ≤8 and >5% battery charge:

IWZefgN.jpg

 

On ≤ 5% battery charge you will see a 10 seconds countdown dialog box in 1 second intervals:

qEQgOYT.jpg

 

sNPAmze.jpg

 

which you can cancel, or have your your *ac*Book be sent to sleep when down to 0.

 

The version with sound uses the pleasant macOS US female voice Allison. If the lady is not installed, you can download "her" via System Preferences, Accessibility, Speech (pane tab should get opened by the install script), click onto the two arrows to the right of System Voice, Customize, English (Unites States) -- Female, activate Allison, OK (macOS downloads voices to /System/Library/Speech/Voices - Allison consumes 120 MB).

 

If you want to see/ see and listen first, disconnect your Mac from its power supply and double click the “run Demo” file in either folder, with or without sound.

 

The launcher is installed per user, so one user can use the script with and another user the script without sound.

 

Run your desired install.command, with or without sound. The script should be active right away without restart.

 

Regarding the sound version, you can also:
- download any other English voice of your liking and edit the name inside the script at the very top
- download any language voice and translate the text inside the script

Edit with Apple Script Editor, save, install, reboot.

 

Tested working in macOS High Sierra 10.13.6. Please feedback if this utility also works in Mojave.

 

If you have ideas, experience bugs, etc., please contribute as precise, succinct, productive and friendly as possible. In case of a bug, always include your version of macOS for me or others to try and help. Thank you.

 

ENJOY :)

 

VERSION HISTORY:
2018-11-10:
1.0 (initial version)

 

IDEAS TO IMPLEMENT IN FUTURE RELEASES:

  1. Have the sound version install script check if Allison is installed, and if not, offer to download and install it.
  2. Purely cosmetic: find a way to have the display notification in the top right of the screen not display the Script Editor icon but the one of the utility without turning the utility into an app but by maintaining a script to keep the load footprint low. This is currently neither possible with an Apple Script nor with an Apple Script Bundle file, only with the script compiled into an app. One possibility might be a Perl approach, if someone volunteers.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Thanks to Toggi3 for the base script:
https://hints.macworld.com/article.php?story=20110219013713667

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

THE CODE (of the version with sound):

install.command:

 

#!/bin/bash
clear
Plist="Library/LaunchAgents/SleepOnLowBattery.plist"
SoundPlist="Library/LaunchAgents/SleepOnLowBatterySound.plist"
Script="/etc/SleepOnLowBattery.scpt"
SoundScript="/etc/SleepOnLowBatterySound.scpt"

#===============================================================================##
## USER ABORTS SCRIPT #
##==============================================================================##
function _clean_up() {
  printf "User aborted!"
  clear
}

#===============================================================================##
## START #
##==============================================================================##
function main()
{
if test -e $Plist; then launchctl stop SleepOnLowBattery && launchctl unload $Plist && rm -R $Plist; fi
if test -e $SoundPlist; then launchctl stop SleepOnLowBatterySound && launchctl unload $SoundPlist && rm -R $SoundPlist; fi
cd "$(dirname "$0")"
echo "Installing.."
sudo cp -R SleepOnLowBatterySound.scpt /etc
cp -R SleepOnLowBatterySound.plist ~/Library/LaunchAgents
sudo chmod +rx /etc/SleepOnLowBatterySound.scpt
launchctl load ~/Library/LaunchAgents/SleepOnLowBatterySound.plist
launchctl start SleepOnLowBatterySound
echo
echo "..done!"
echo
}

trap '{ _clean_up; exit 1; }' INT

if [[ `id -u` -ne 0 ]];
  then
    echo "This script must be run as ROOT!"
    sudo "$0"
  else
    main
fi

#===============================================================================##
## EOF #
##==============================================================================##

 

 

LaunchAgent SleepOnLowBatterySound.plist:

Spoiler

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>KeepAlive</key>
	<false/>
	<key>Label</key>
	<string>SleepOnLowBatterySound</string>
	<key>LowPriorityIO</key>
	<true/>
	<key>ProgramArguments</key>
	<array>
		<string>/usr/bin/osascript</string>
		<string>/etc/SleepOnLowBatterySound.scpt</string>
</array>
	<key>RunAtLoad</key>
	<true/>
	<key>ServiceDescription</key>
	<string>SleepOnLowBatterySound</string>
	<key>StartInterval</key>
	<integer>120</integer>
</dict>
</plist>

 

 

Script SleepOnLowBatterySound.scpt:

Spoiler

set voicename to "allison"
--set voicename to "daniel"
set currentOutputVolume to output volume of (get volume settings)

set Cap to (do shell script "ioreg -w0 -l | grep ExternalChargeCapable")
tell Cap to set {wallPower} to {last word of paragraph 1}
if wallPower = "Yes" then
	-- display dialog "Connected to Power Supply!" buttons {"OK"} default button 1 giving up after 10
	return 0
else
	-- display dialog "Running on Battery!" buttons {"OK"} default button 1 giving up after 10
	set Cap to (do shell script "ioreg -wO -l | grep Capacity")
	tell Cap to set {Available, Max} to {last word of paragraph 3, last word of paragraph 2}
	set Pct to round (100 * Available / Max)
	
	if Pct  10 and Pct > 8 then
		display notification "Your Mac will sleep soon unless plugged into a power outlet!" with title "LOW BATTERY!"
		set volume alert volume 80
		set volume 4
		beep 1
		do shell script "say -v " & voicename & " \"LOW BATTERY\" "
		set volume output volume currentOutputVolume
		display notification "Your Mac will sleep soon unless plugged into a power outlet!" with title "LOW BATTERY!"
		
	else if Pct  8 and Pct > 5 then
		display notification "Your Mac will sleep very soon unless plugged into a power outlet!" with title "VERY LOW BATTERY!"
		set volume alert volume 80
		set volume 4
		beep 2
		do shell script "say -v " & voicename & " \"VERY LOW BATTERY\" "
		set volume output volume currentOutputVolume
		
	else if Pct  5 then
		set volume alert volume 80
		set volume 5
		beep 4
		do shell script "say -v " & voicename & " \"BATTERY LEVEL TOO LOW - GOING TO SLEEP IN 10 SECONDS\""
		set volume output volume currentOutputVolume
		
		set theCounter to 10
		set theInterval to 1
		repeat until theCounter is 0
			display dialog "Sending computer to sleep in " & theCounter & " seconds" as text buttons {"Cancel"} giving up after theInterval
			set theCounter to theCounter - theInterval
		end repeat
		do shell script "pmset sleepnow"
	end if
end if

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SleepOnLowBattery (SOLB) by BugsB v.1.0 (2018-11-10).zip

Edited by BugsB

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      GLASGOOD'S
       
      MOJAVE HACKINTOSH GUIDE 
       

       
       
       
      **FOR**  GIGABYTE Z390 AORUS PRO
       
       
       
       
      CREDITS & THANKS
       
      @MaLd0n
      His help with EFI configuration and DSDT
       
      CLOVER  TEAM
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, rehabman, Download-Fritz, Zenit432, cecekpawon Et al
       
      APPLEALC
      Acidanthera, vit9696
       
      VOODOOHDA
      autumnrain, slice2009, zenith432
       
      ESP PRO MOUNTER
      @Micky1979 
       
      HACKINTOOL
      @headkaze
       
      CLOVER CONFIGURATOR
      Mackie100
       
      THEME ENGINE
      Alex Zielenski
       
      INSANELYMAC
      OLARILA
       
      Hackintool Tutorial
      daliansky
       
      Hackintosh Guide
      CorpNewt
       
       
      MONITORCONTROL
      JoniVR & theOneyouseek
       
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
      UPDATES
       
       
      ------------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      PART LIST
       
      • Intel I7 8700 
      • Gigabyte Z390 AORUS PRO
      • Gigabyte AORUS RADEON RX 580 8GB ( connected to monitor with DisplayPort )
       
      • Corsair Vengeance LPX 16GB ( 2 x 8GB ) 2666MHz – CMK16GX4M2A2666C16  In this build, both memory modules are installed in memory slots DDR4_A1  and DDR4_B1 
       
      • Corsair RM650x 80 Plus Gold Power Supply Unit
      • Corsair H100i V2 AIO Hydro/Water RGB LED CPU Cooler
      • Samsung EVO 500GB SSD (2.5) macOS Mojave
      • Samsung EVO 250 GB SSD (2.5) Windows 10 Pro
      • NZXT H500 Mid Tower ATX Case
       
      • RECOMMENDED WIFI CARD → ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS  
      OR
      • WIFI and Bluetooth with BCM94331CD with PCI-e adapter (but will require AirportBrcmFixup.kext for AirDrop.. )
       
      ** Avoid Samsung EVO 970 PLUS as Hackintosh has problem with that device **
       
       
      WORKING
       
      • Sound 
      • HDMI Port on AMD RX580 / 590 ( Ensure you disable BIOS CSM if using HDMI on RX580 / RX590 )
      • HDMI Port on Aorus Z390 Motherboard ( Ensure you have correct BIOS settings as per this guide for Intel only)
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Handoff
      • Continuity
       

       

       
       
       

       
       
       
       
       
      PREAMBLE - BEFORE YOU START 
       
      Here detailed, is all the  steps towards building a successful and stable Aorus Pro Z390 Hackintosh, if you are a first time Hackintosher, this guide will have you quickly up and running with the Aorus Pro Z390 Hackintosh. To rule out any problems from the go,
      only have the disc that you plan to install macOS Mojave connected to the Aorus Pro, disconnect any other Windows / Linux or data drives, external drives from your Aorus Pro. Windows / Linux and data drives can be connected after successful installation of macOS Mojave
      If you have more than 16 GB of memory, then install macOS Mojave with just 16GB, you can later add any additional memory. Install memory modules in slots DDR4_A1  and DDR4_B1. This build has the Wi-Fi combo PCI-e adapter card installed in slot PCIEX1_3.
      The WiFi/Bluetooth PCI-e Combo card used in this Aorus Pro guide has it's 9 pin USB cable attached to motherboard header F_USB2 and is enabled in SSDT-UIAC.aml ( USB ports fix ). 
       
      Do install macOS Mojave on its own physical drive, so do not try and install macOS Mojave onto a free partition on a disc that contains Windows.
      Remove any Thunderbolt cards, Thunderbolt card can be reinserted after installation.  Double check your BIOS settings are the same as this guide. 
       
      Following are unsupported / problematic
       
      • Intel Optane ( if you have this, remove it before installation of macOS Mojave )
       
      • Samsung EVO Plus drives ( firmware problem with macOS )
       
      • XFX Radeon RX 580
       
      • NVIDIA GTX / RTX not supported in macOS Mojave
       
      • Fenvi T919 Wireless Card, it seems Bluetooth is not working out of box for some users ( Maybe the USB port attached to Fenvi bluetooth is wrongly configured, or the SSDT-UIAC.aml port connector was not configured as Internal, or maybe some other reason )
         Save yourself a headache --->  RECOMMENDED WIFI CARD WORKING OUT OF BOX (OOB)  is ---> ABWB 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E) BCM943602CS 
       
      Q - WILL THIS GUIDE WORK WITH MY NON AORUS Z390 MOTHERBOARD ?
      A - Possibly may work with other Z390 chipset motherboards, but you will have to remove SSDT-UIAC.aml from Clover / ACPI / patched from the PRE-INSTALL EFI and enable the ports limit patch.
       
       
       
       
       
      PART 1 - DOWNLOAD 
       
       
      Download the following:
       
      • CLOVER
       
      • PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip
       
      • POST-INSTALL Aorus Pro Z390 EFI - RX580.zip 
       
       
       
       
       
      // INTEL UHD 630 EFI  Aorus Pro Z390 EFI's below. For those who do not have a Graphics Card Installed in PCIe Slot, requires Initial Display Output BIOS setting to be changed to IGFX  spoiler below!
       
      •  PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
      • POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip
       
       
       
       
       
      • ESP MOUNTER PRO v1.9
       
      • macOS MOJAVE 
       
      • CLOVER CONFIGURATOR
       
      • EmuVariableUefi-64.efi  ( Used only to initialise iMessages. It then must be removed from Clover drivers64UEFI folder as will cause intermittent memory allocation errors on boot, explained in guide)
       
       
      OPTIONAL DOWNLOADS
       
      • Native Display Brightness with MonitorControl
       
      • VoodooHDA.kext.zip 

      • ThemeEngine 
       
      • Assets.car 
       
       
      // Not really needed but IF no sound on Wake from Sleep then use SSDT-ALC1220 and CodecCommander
      • SSDT-ALC1220.aml  ( Resolves Audio Sound on Wake, place in Clover / ACPI / Patched )
       
      • CodecCommander.kext.zip ( Resolves Audio Sound on Wake, place in Clover / Kexts / Other )
       
       
       
       
      PART 2 - BIOS SETTINGS (version F9 )
       
       
      Here is a list of the BIOS settings that I have used ( Screenshots in spoiler below )
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled
      • Chipset → Internal Graphics → Enabled
      • Chipset → DVMT Pre-Allocated → 256M
      • Chipset → DVMT Total Gfx Mem → MAX 
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → ErP → Disabled
      • Power → RC6 (Render Standby) → Disabled
       
      // IF USING  CORSAIR H100i V2 AIO CPU WATER COOLER 
      • MIT → Smart Fan 5 Settings → CPU Fan Control mode → PWM 
       
      • Save & Exit → Save & Exit Setup
       
      SCREEN DUMP SPOILERS
       
       
       
       
       
      PART 3 – CREATE A MOJAVE USB FLASH INSTALLER
       
      Prepare USB Installer for Mojave ( Video below )
       
      • Insert USB drive
      • Launch /Applications/Utilities/Disk Utility
      • Disk Utility → View → Show All Devices
      • On Left-hand panel → External →(Identify your USB device in left hand panel)
      • Click and highlight your USB device in the left-hand panel.
      • Click erase button.
      • Name: USB
      • Format: Mac OS Extended (Journaled )
      • Scheme: GUID Partition Map
      • Click Erase button.
       
      • Place the downloaded MacOS Mojave app into Applications folder.
      • Open Terminal copy and paste:
       
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --nointeraction && say Mojave Drive Created  • Enter
       
       
       
       
       
       
       
       
       
       
       
      PART 4 – INSTALL CLOVER ON THE MOJAVE USB INSTALLER 
       
      Make Mojave USB flash drive installer bootable.( Video below )
       
      • Launch Clover application, double click.
      • Click Continue → Continue → Continue 
      • Click Change Install Location button.
      • Click Install macOSMojave USB installer → Continue
      • Click Customise button
      • Choose:
      Clover for UEFI booting only Install Clover in the ESP Themes UEFI Drivers Install RC scripts on target volume    NO NEED TO INSTALL RC SCRIPTS ON USB INSTALLER • Click Install button
      • Installation Complete!
       
      Video:
       
       
       
       
       
       
      PART 5 – CUSTOMIZE MOJAVE USB INSTALLER FOR AORUS Z390 PRO
       
      Replace Clover EFI folder with PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip  OR  if NO graphics card installed in PCIe slot, then use PRE-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip( Video below ) 
       
      • Install ESP Mounter Pro v1.9
      • Using ESP Mounter Pro, Mount ESP on disk2s1 ( Your disk name may be different )
       

       

       
       
       
      • Open mounted EFI partition found on desktop
      • Copy all the contents from Aorus 390 Pro EFI folder
      • Replace USB EFI folder with all the contents inside the Aorus 390 Pro EFI folder.
       
       

       
       
       
       
       
       
       
      PART 6 – INSTALL MAC OS MOJAVE ON INTERNAL DRIVE
       
      INSTALL NOTE
       
      ENSURE BIOS: Above 4G Decoding is set to Disabled 
      if Above 4G decoding is set to enabled then macOS Mojave install will freeze at 2 mins remaining and will not shut down properly!!!!
       
      Please be patient during install, so when install gets to 2 or 3 mins remaining then it may take extra time. Be ready to boot from UEFI USB installer by pressing F12 when install initiates restarts. 

      • INSERT USB INSTALLER INTO THE USB 2.0 PORT  
       
       
       Here is a walkthrough of the full process using the macOS Mojave USB Installer on the Aorus Z390 Pro. 
       
       
       
       
      • Power on PC and press F12• Choose bootable USB drive from boot menu.
       
       
       
      • Install macOS Mojave to internal solid state or hard drive.
       
       
       
      When system returns to the Clover boot menu choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      At next restart, press F12 and boot from external UEFI USB device and choose:
       
      • Boot macOS Install from Macintosh
       
       
       
      Proceed with macOS Mojave install
       
       
      macOS Mojave is now installed, but it can only boot at this moment thanks to FakeSMC and Clover on the Mojave USB flash drive installer.
       

       
       
       
       
       
       
      PART 7 – MAKE AORUS Z390 PRO INTERNAL DRIVE BOOTABLE
       
      Make internal drive bootable ( Video below )
       
      So far, the Aorus Pro can only boot the internal system drive with the aid of the Mojave USB Installer.
      To boot from the internal system drive without the installer: 
       
      Download and install Clover with RC Scripts on target volume.  
      If your Aorus Pro Z390 has AMD RX 580 then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - RX580.zip  folder and paste it inside the the System Drive EFI partition.          OR
      If your Aorus Pro Z390 has no graphics card installed in PCIe slot, then copy the EFI folder from inside POST-INSTALL Aorus Pro Z390 EFI - Intel UHD630.zip  folder and paste it inside the the System Drive EFI partition.   
       

       
       
       
      • Remove USB Mojave installer and shut down and restart.
       
      Aorus Hackintosh should now be able to boot to macOS Mojave, Done, well almost ! 
       
       
       
       
       
      PART 8 – ENABLE IMESSAGES & FACETIME 
       
       
      // UPDATE 21st MAY 2019
       
      Past experience suggests Clover Configurator now automatically populates correct values for working iMessages when you select an SMBIOS.  
       

       
      After selecting SMBIOS, example iMac19,1 for Aorus Pro with RX580 ( image above ) then go to Apple and ensure you have the "serial number is not valid " message. Done!
       
      If you still have problems connecting to iMessage, test and ensure that AirDrop is working, then follow instructions inside spoiler. 

       
       
      • Mount internal drive EFI/ESP partition
      • Go to folder CLOVER → drivers64UEFI 
      • Place both EMUVariableUefi-64.efi inside → drivers64UEFI
       
       
      Using Clover Configurator, add the following argument to config.plist using Clover Configurator.
       
      • Slide = 0
       

       
       
      Shutdown and then press power on button on PC.
       
      • You should now be able to Log into iCloud, iMessages and FaceTime
       
       
       
      • NOW delete EMUVariableUefi-64.efi from CLOVER → drivers64UEFI Folder 
      • Shutdown and restart Aorus Pro hackintosh. iMessages etc is now operational without EMUVariableUefi-64.efi ( EMUVariableUefi-64.efi only needed to initialise iMessages )
       
       
      // UPDATE 22nd May 2019 
       
      • It seems that there are no "Couldn't allocate runtime area"  errors when continuing to use EMUVariableUefi-64.efi since updating to macOS Mojave 10.14.5 and using Clover version r4920. 
      • It is important to delete EMUVariableUefi-64.efi, this will avoid very intermittent boot errors such as: “Couldn’t allocate runtime area”  post errors.
       
       
       
       
      PART 9 – ENABLE TRIM for Solid State Flash Drives
       
      Open Terminal and enter the following command:
      sudo trimforce enable  
       
       
       
       
      DEFAULT SSDT –  USB PORTS FIX CONFIGURATION WITH FRONT USB-C - SSDT ALREADY INSIDE AORUS Z390 EFI FOLDER  – Provided by @AudioGod 
       
       

       

       
      If you have USBC on Computer Chassis / Case, then SS01 and SS02 is mapped to that USB C port 
       

       
       
       
       
       
       
      ------------    GUIDE FINISHED YOU SHOULD NOW HAVE WORKING AORUS Z390 PRO HACKINTOSH  WITH SSDT USB FIX   ------------
       
       
       
      OPTIONAL: Set Wi-Fi Country Code
       
       
       
       
       
       
      OPTIONAL: System Information - PCI
       
       
       
       
       
       
       
      OPTIONAL:  Enable HDMI Audio on RX580
       
       
       
       
       
       
       
      OPTIONAL:  Native Display Brightness - with MonitorControl

       
       
       
       
       
       
      OPTIONAL:  Dual Boot macOS Mojave & Windows 10 
       
       
       
       
       
       
       
       
      OPTIONAL:  Replace the default "About This Mac" Apple Logo with RED AORUS APPLE
       
       

       
       
       
       
      OPTIONAL - ALTERNATIVE SSDT 1 –  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 2 -  SSDT Ports configuration below - replace SSDT inside Clover /ACPI/PATCHED folder 
       
       
       
       
       

      OPTIONAL - ALTERNATIVE SSDT 3 – Create your own SSDT
       
       
       
       
       
      FRAMEBUFFER PATCHING  – For working Intel UHD 630 Graphics, working HDMI Port, working HDMI Audio on Aorus Z390 Pro
       


       
       
       
       
       
       
      RECOMMENDED READING  – Excellent Hackintosh Vanilla guide created by CorpNewt with in depth tutorial on Clover.  
       
      https://hackintosh.gitbook.io/-r-hackintosh-vanilla-desktop-guide/config.plist-per-hardware/coffee-lake
       
       
       
       
       
       
       
      FOR MORE HACKINTOSH INFORMATION SUCH AS USB PORTS FIX, CLOVER CONFIGURATOR, HACKINTOSH BACKUP WITH CARBON COPY CLONER .....   THEN SEE MY PREVIOUS GUIDE FOR ASUS Z370-G Strix
       
       
       
       
       
       
       
       
       
       
       

       
       
       
       
       
       
       
       
      SSDT-UIAC.aml.zip
      SSDT-UIAC.dsl.zip
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By Candrahm
      Hi everybody,
       
      I'm new here and French. 
      I success to hack my Asus X751LJ and pass it to High Sierra 10.13.6, not easily, and everything works except the keyboard and the touchpad.
      I tried VoodooPS2Controller, ApplePS2SmartTouchpad, even VoodooI2C, but nothing works...
      Could someone help me? Is there a DSDT problem? Witch kext should I use?
      I post my ACPI and Kexts folders and my IOReg.
      Please... Help me. I'm desperate...
      MacBook Pro de Candrahm.ioreg
      Archive.zip
    • By End3rPower50
      Hi, i've installed on my pc MacOS Mojave but after installation my pc, sometimes, crash giving kernel panic.
      I came to the conclusion that it is a random kernel panic because sometimes it starting up and other times it isn't starting up
       
      My PC:
      CPU: Intel i7 6500U
      LAN: RTL8100
      Wi-Fi & Bluetooth: Dell DW1820A
      USB 3.1
       
      CLOVER.zip
    • By suadkqiku
      Hello Guys I'm currently planning to build my first hackintosh and I've made a first list with the components I would use. The Hackintosh would be used for music and video productions (with macos Sierra).
      I would be very thankful if someone could go through my list and give me his opinion, if I'm on a good way with the components I chose or if there are better options in the same price category.
      Motherboard: Gigabyte Z390 AORUS PRO WIFI ATX CPU: Core i9-9900K CPU Cooler: Corsair H60 (Water) Graphic Card: Sapphire RX 580 Pulse 8GB RAM: Crucial Ballistix Sport LT (32GB) SSD: Samsung 860 EVO 1TB PSU: Corsair RM 650x Watt Case: Thermaltake View 27
×