Jump to content
Sign in to follow this  
Followers 0
Dmitry R

10.14 + hd530 + 4kTV problem

1 post in this topic

Recommended Posts

Hi guys, stuck on problem of switching on my TV back from off state. I have asus H270f strix mobo with i7-6700K CPU (HD530), Clover 4722 and latest whatevergreen and lilu. I installed 10.14.1 on it and it works fine.  the m/b has dp, hdmi and dvi on board. I'm using dp + dp<->hdmi adapter to connect my mac to 4k tv which I'm using as a primary monitor. This connection supports 4k@60hz and I'm happy with the detailed and sharp picture I see on my tv. The problem is that when I get out for a while then, when I come back, I see my tv turned off by timeout and when I turn it back on, I see only the black screen. The computer works, I prevented it from going to sleep. To see the picture again on my tv I have to go to another computer, then, using screen sharing, I have to connect to my computer and then I have to choose couple of times different refresh rates in System Preferences -> Displays. After that I go back to my tv, see the picture and can continue to work. I made a edid report for my tv. may be somebody knows how to use this data to make my mac to wake up the tv correct way?

Thank you, Dmitry

43UHD_LCD_TV.txt.zip

Edited by Dmitry R

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Patch Catalina or Mojave macOS Installer App for Unsupported Machines
       
      Often for economic reasons, Apple prevents the Installer.app for its latest macOS from installing on older machines perfectly capable of running it eg macOS 10.14 Mojave on Unsupported Macs Thread.
       

       
      In Mojave 10.14, @ASentientBot posted a method to patch the distribution file in OSInstall.mpkg to enable the Mojave installer to install on unsupported machines (with or without graphics card metal support). 
       
      In Catalina 10.15beta, the above method no longer works since Apple is checking OSInstall.mpkg for its file signature and the mandatory requirement in Catalina to install to 2 separate apfs volumes necessitates using the original Catalina macOS Base System Installer.  Fortunately, it is still possible to substitute High Sierra’s Apple Signed OSInstall.mpkg inside the Catalina or Mojave InstallESD.dmg by making it R/W.
       
      The procedure below will allow Macs or Hacks able to install High Sierra to also install Catalina or Mojave (eg SMBIOS MacPro5,1, iMac11,3, MacBook Pro7,1 which have been unsupported in macOS 10.14.x and 10.15beta) -credit to @ASentientBot's post.
       
      Prerequisites
      1. Mac or Hack capable of and running High Sierra 10.13.x
      2. An original, untouched copy of OSInstall.mpkg from High Serra InstallESD.dmg - attached OSInstall_10.13.6.mpkg.zip save to your ~/Downloads folder
      3. macOS Installer App eg for Catalina beta or Mojave downloaded to /Applications
      4. Add NVRAM boot arg (or Clover config.plist boot arg on a hack) -no_compat_check to enable system to boot to final completed Mojave or Catalina install.
       
      Procedure
      1. Open Terminal and type the following
       
      open /Applications/Install*/Contents/SharedSupport/InstallESD.dmg (assuming the Catalina or Mojave Installer App is in /Applications)  
      2. Open Disk Utility, click File|New Image|Image from ‘InstallESD”
      3. Save as read/write image, no encryption in /Applications
      4. Unmount InstallESD in DU by clicking the "eject" icon next to it
       
       
      5. Open the R/W InstallSD.dmg in /Applications and replace Catalina’s/Mojave's OSInstall.mpkg with High Sierra’s version by typing in terminal
       
      open /Applications/InstallESD.dmg cp ~/Downloads/OSInstall_10.13.6.mpkg /Volumes/InstallESD/Packages/OSInstall.mpkg  
      6. Unmount InstallESD in DU by clicking the "eject" icon next to it
      7. Replace original Catalina/Mojave InstallESD.dmg with our patched one, making a backup of the original.  In terminal, type
       
      sudo mv /Applications/Install*/Contents/SharedSupport/InstallESD.dmg /Applications/InstallESD_orig.dmg sudo mv /Applications/InstallESD.dmg /Applications/Install*/Contents/SharedSupport/  
      8.  Test the newly patched installer!…

    • By ludufre
      Installing macOS Mojave 10.14.5 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      06/10/2019 00:44h GMT-0
      - Completely rewritten.
       
      10/17/2018 08:12h GMT-0
      - Fix Kexts permissions commands adjusted.
      - Removed FrameBuffer patch that is not needed.
      - Added audio solution and HDMI.
      - Unfortunately DisplayPort does not work.
      - Replaced Wifi/BT with DW1560 (BCM94352Z)
       
      10/11/2018 04:15h GMT-0
      - Added USB 3.0 patch.
      - Adjusted some steps.
      - Changed text formatting.
       
      10/11/2018 03:42h GMT-0
      - Added missing UEFI configuration.
       
      10/07/2018 00:36h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Not tested yet.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Make audio work.
      - Make HDMI audio work.
      - Test DisplayPort.
      - Make second ethernet work.
      - Replace Wifi/Bluetooth.
      - Test DP.
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover Configurator
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install--nointeraction This will take about 30 minutes.
       
       

      Install bootloader

      Download the CloverEFI (used 4953, from Automated Clover Builds) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64
      - UEFI Drivers - HFSPlus
      - UEFI Drivers - NvmExpressDxe-64 (I have an NVME SSD)
      - FileVault 2 UEFI Drivers (I strongly recommend enable FileVault)


       
       
      Make things works
       
      We'll make a full working flash drive, so follow these instructions:
       
      Will be mounted the EFI partition of the flash drive.
       
      Open the the /Volumes/EFI/CLOVER/config.plist inside this new partition with Clover Configurator (used 5.4.4.0)
       
      Important modifications
       
      config.plist

      BOOT Page
       
      - Add: Arguments - darkwake=2
      - Uncheck: NeverDoRecovery
      - Check: Legacy - XMPDetection=Yes
       
      KERNEL AND KEXT PATCHES Page
       
      - Check: KernelPm
       
      RT VARIABLES Page
       
      - Change: CsrActiveConfig - 0x3
       
      SMBIOS Page
       
      - Change: Macmini8,1 - Mac mini (Late 2018) | Intel Core i7-8700B @ 3.20 GHz

       
      - Click: Generate New (few times in the two buttons)

       
       
      Need some Kexts in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the Lilu.kext from here. I used the version 1.3.6.

       
      Intel UHD 630
       
      ACPI Page
      - Uncheck: Fixes - AddHDMI
      - Uncheck: Fixes - FixDisplay
      - Uncheck: Fixes - FixHDA
       
      GUI Page
      - Change: Screen Resolution - 3840x2160 (My monitor is 4K)

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.

       
      Audio ALC 1220 and HDMI audio

      BOOT Page
      - Add: Arguments - alcid=11

      DEVICES Page
      - Change: Audio - Inject - 11
      - Uncheck: Audio - AFGLowPowerState
      - Uncheck: Audio - ResetHDA

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the AppleALC.kext from here. I used the version 1.3.8.

       
      All USBs (2.0, 3.0, Type-C, internal)
       
      KERNEL AND KEXT PATCHES Page - KextsToPatch
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 1 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 2 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 3 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FF0F0F
      - Replace* [HEX]: 83FF3F0F
      - Comment: USB Port Limit Patch 4 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
       
      Need SSDT patch in the folder /EFI/CLOVER/ACPI/patched/
       
      - Download the SSDT-EC.aml, SSDT-UIAC.aml and SSDT-USBX attached bellow.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      LAN Cards
       
      Need a Kext for feach card in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the IntelMausiEthrenet.kext from here. I used the version 2018-1031.
      - Download the SmallTreeIntel82576.kext attached bellow. I do not remember where I found it.

       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: Periphelrals - Initial Display to IGP
      - Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Change value: Chipset - DVMT Pre-Allocated to 128M
      - Save & Exit Setup
       
      - Now, hold the F12
      - In the list, select your flash drive.
      - It will show twice. One with UEFI prefix and another without.
      - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "HD".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
       
       
       
       
       
       
      Z370N-WIFI.zip
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      06/09/2019 14:16h GMT-0
      - Added missing parts in the post-install step. 
       
      06/04/2019 17:19h GMT-0
      - Updated Clover link. 
       
      06/02/2019 18:08h GMT-0
      - Added info about update 10.14.5. 
       
      03/13/2019 13:15h GMT-0
      - Updated info about touchpad replacement and CPU and 4G LTE modem.
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Added info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Added link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       
      - CPU upgrade:
      Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
      I initially had problems with overheating. The processor ran at full load above 90 degrees.
      After using a quality thermal paste I can work between 70 and 80 degrees.
      Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
      I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.
       
      - Touchpad upgrade:
      Replaced the stock with T460 touchpad.
      This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
      Just do it!
       
      - RAM upgrade:
      No mistery here. Just upgade.
       
       
      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP, with good paste I have no overheating)
      - Replace touchpad with T460 model (Ordered. It's on the way) Done. Sensitivity and perception of quality much better. I recommend 100%!
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Recognize but not connect. I already gave up...
      - Upgrade to 16GB RAM Done
      - Make trackpad appear in System Preferences
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI from SourceForge (used 4934) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.6.
      - Download the VoodooHDA from here. I used the version 2.9.1 and patched the sound volume (attached below).
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
      - Download the VirtualSMC.kext from here. I used version 1.0.2. Replaced with FakeSMC of the HWSensors 3 r196 package.
      - Download the FakeSMC.kext from here. I used the version 2018-0915. Replaced with VirtualSMC.kext due 10.14.4 issues on update.
      - Download the AppleALC.kext from here. I used the version 1.3.4. Replaced with VoodooHDA.kext due mic not working.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 2.0.0.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       
      System update 10.14.4
       
      - Updated Clover to 4910.
      - Updated Lilu.kext to 1.3.5 and WhateverGreen to 1.2.7.
      - After first reboot the update progress stoped with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      So I created a flash drive with Clover 4910 and put only my config.xml, SSDT-L440.aml, the updated Lilu.kext and WhateverGreen.kext. And I decided to test VirtualSMC instead of FakeSMC.kext.
      With this I was able to install update 10.14.4. After installation I can boot normally, even with FakeSMC.kext that already in /Library/Extensions.
      I do not know what exactly happened, but now works everything like was previously.
       


       
       
      System update 10.14.5
       
      - Updated Clover to 4934.
      - Updated Lilu.kext to 1.3.6 and WhateverGreen to 1.2.9.
      - After first reboot the update progress stoped again (like 10.14.4 update) with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      I decided to rollback to FakeSMC.kext but this time with the version of HWSensors 3. Link above.
      With this I was able to install update 10.14.5. After installation I can boot normally.
       

       
       

      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @Shiki and all others members involved directly or indirectly.
       
       
       
       
       
       
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  AptioMemory --> (consigliato) 
                               : Driver64UEFI  ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
                               : Selezionate l'altri driver come da successiva immagine,
       
      *Nota: Altri driver che si possono usare  al suo posto  sono:
       informazioni 
       
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       Oppure direttamente da usb  
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip





       

    • By kushwavez
      Acer Aspire V15 V5-591G - Mojave 10.14.5
       
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS:Insyde Corp. v 1.15
      - CPU:Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM:SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth:Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio:Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader:Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam:HD Webcam
      - HDD:TOSHIBA MQ01ACF032 320 GB HDD
      - SSD:SPCC M.2 230 GB SSD
      - Display:1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad:Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      -Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      -HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255):(Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud(native)
      - Integrated webcam(native)
      - 3.0 USB (native)
      - Touchpad and Keyboard(ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info:Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method:You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      -2nd and I think the best method:Replace your M.2 Qualcomm Card with a compatible BCM94352Zcard (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareData.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode:UEFI
      Getting ready for Installation:
      - Download the install zip (bootpack & postinstall): Click here -> acer_aspire_v591g_installfiles.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

       
      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.7 beta 5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Mojave please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Mojave & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart
      list vol (Now select the "System" volume,(FAT 32) For example I select 4)
      sel vol 4
      list part(Select System type partition, for example 2)
      sel part 2
      assign letter=b(This will "mount" your EFI partition)
      Open Explorer++ or TotalCommander in administrator mode to manage EFI
      remove letter=b (This will "unmount" your EFI)
      2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI)
      Open Explorer++ or TotalCommander in administrator mode to manage EFI
      mountvol b: /d (This will unmount your EFI)
      Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.06.05: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip"-> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
×