Jump to content
shmn

Disable/patch Nvidia 1080 Ti on Gigabyte Z370

15 posts in this topic

Recommended Posts

Hi, I have been trying to follow @RehabMan 's guide to disable my dGPU ( https://www.tonymacx86.com/threads/guide-disabling-discrete-graphics-in-dual-gpu-laptops.163772/ ) for two days now, but haven't found a way to disable my 1080 Ti on my desktop Clover hack.

I have a dual-boot (Win/Mac) machine on a Z370 Aorus 7. Since there's no nvidia drivers for Mojave atm, I want to stick with the iGPU under Mac, but still use the 1080 Ti under Win.

The hack boots just fine when I remove the 1080 Ti, if it's plugged in via PCIe I get a kernel panic.
Please find attached my ACPI folder, my clover config.plist and the kernel panic details.

Might there even be a less hacky way than patching these ACPI files? I appreciate any kind of support! Thanks!

ACPI.zip

config.plist

kernelPanic.jpg

systemReport.txt

Share this post


Link to post
Share on other sites
Advertisement

DSDT.aml.zip

use 

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

DSDT.aml.zip

use 

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

 

Sry, guess I was too euphoric, just changed my HDD configuration in the BIOS (removed RAID 1 since it's not supported). I then replaced the Strings you mentioned, but I can no longer boot into macOS :/ How can the two HDDs destroy the working patch?
 

Attached is the new origin DSDT that Clover extracted. Would appreciate your help again, not sure what I'm doing wrong all the time...

changedACPI.zip

Share this post


Link to post
Share on other sites
1 hour ago, shmn said:

 

Sry, guess I was too euphoric, just changed my HDD configuration in the BIOS (removed RAID 1 since it's not supported). I then replaced the Strings you mentioned, but I can no longer boot into macOS :/ How can the two HDDs destroy the working patch?
 

Attached is the new origin DSDT that Clover extracted. Would appreciate your help again, not sure what I'm doing wrong all the time...

changedACPI.zip

post a full dump for full solution

RunMe.app

Share this post


Link to post
Share on other sites
11 minutes ago, MaLd0n said:

post a full dump for full solution

RunMe.app

 

Thanks, Log is attached. Please note that I had to REMOVE the 1080 Ti in order to be able to boot and run your app at all.
The customPatches picture shows the patches I added in CloverConfigurator, I wasn't able to create a working DSDL.aml patch file myself.

Definitely willing to donate if we can make this work :) Thx!

Send me Simons-Hackintosh.zip

customPatches.jpg

kernelPanicWhenGPUPluggedIn.jpg

NewestOrigin.zip

Share this post


Link to post
Share on other sites
6 hours ago, MaLd0n said:

 

Thx, It's booting now and all hard drives show up, but I'm getting severe graphics glitches/jitter (plz see attached image).

I updated Clover and replaced the Clover folder inside EFI. Something wrong with the kexts maybe?

 

GraphicsGlitch2.jpg

 

Edited by shmn

Share this post


Link to post
Share on other sites
5 hours ago, shmn said:

 

Thx, It's booting now and all hard drives show up, but I'm getting severe graphics glitches/jitter (plz see attached image).

I updated Clover and replaced the Clover folder inside EFI. Something wrong with the kexts maybe?

 

 

 

extract new SEND_ME, i need check

Share this post


Link to post
Share on other sites
38 minutes ago, MaLd0n said:

i pout ur default video config

check if work

config.plist.zip

Unfortunately it doesn't boot with your new config... It gets stuck somewhere in the boot screen.

Share this post


Link to post
Share on other sites

u need add a correct video config, is just it

 

my old config with pink screen i use

 

IntelGFX 59128086
ig-platform-id 59120003
Check InjectIntel

Share this post


Link to post
Share on other sites
2 hours ago, MaLd0n said:

u need add a correct video config, is just it

 

my old config with pink screen i use

 

IntelGFX 59128086
ig-platform-id 59120003
Check InjectIntel

 

I wasn't able to make it work with your clover package, so I simply used your DSDT.aml with my previous clover folder.

It SUCCESSFULLY booted ONCE. I later rebooted and now I'm stuck at either of these two boot screens:

 

 

IMG_4901.jpg

IMG_4902.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By AppleBytes
      Hello,
      I'm working on a re-install of OSX on a dell inspiron 9400. I was finally able to get a copy of SL on it. But it still needs MUCH work, as the graphics (NVIDIA Geforce Go 7800) isn't properly recognized -- either by model, or installed VRAM.
      It has 512Mb, but only initializes 256Mb VESA.
      Anyway, as a start, I thought it best to use a valid dsdt.dsl for compilation, and start there. I've managed to remove all the warnings, and errors save 2
      OUTPUT:
      # sudo iasl -ta ./dsdt.dslll Intel ACPI Component Architecture ASL Optimizing Compiler version 20110527-64 [May 27 2011] Copyright (c) 2000 - 2011 Intel Corporation ./dsdt.dslll   3519:                                 Return (0x00) Error    4080 -           Invalid object type for reserved name ^  (found INTEGER, requires Buffer) ./dsdt.dslll   3956:                     Return (Package (0x00) {}) Remark   5072 -         Effective AML package length is zero ^ ASL Input:  ./dsdt.dslll - 4997 lines, 158533 bytes, 1633 keywords Compilation complete. 1 Errors, 0 Warnings, 1 Remarks, 577 Optimizations I'm attaching a copy of the above output, and the dsdt.dsl file in a tarball to this post in hopes someone with the required knowledge can help me fix it.
      FWIW
      SMBIOS I'm using indicates this is a MBP 3,1
      cpu: cd2 (T7400 @2.16Ghz)
      graphics: NVIDIA Geforce Go 7800 ( G70M? )
      ram: 4Gb
      dell inspiron 9400 (Laptop)
       
      Thank you for all your time, and consideration!
       
      --Chris
       
      DSDT-DSL.tar
    • By penghubingzhou
      URL:https://github.com/penghubingzhou/VoodooI2C-DSDT
       
      VoodooI2C-DSDT is a repository that is aiming at collecting various successful DSDTs for Voodoo I2C.
      Purpose
      The purpose of this repository is to provide some useful code examples for people who haven't yet make Voodoo I2C work. Maybe It don't have your model of laptop, but code in this repository may have some help and references for you.
      Note that the code in this repository is ONLY FOR REFERENCES and it can‘t replace your own work!
      For Submission
      This repository welcomes everyone to submit DSDT code examples that have successfully made VoodooI2C work by PR. To submit your example, please put the DSDT file (or Hotpatch SSDT file), an ioreg without Voodoo I2C installed, and Info.txt in a folder named by your laptop model. Info.txt should include:
      Your CPU model (better for including CPU platform)
      Your touchpad Device ID
      The mode you use (GPIO interrupt or polling)
      Satellite Driver You Use
      Then, fork this repository and clone it, put your file in and commit it to your repository. After checking the conflicts, you can send your commit as a PR to me.
      An example for submitting can be found in Lenovo Xiaoxin Chao 7000-14.
      Credits
      @Alexandred for VoodooI2C @daggeryu for the idea in this repository @penghubingzhou and @williambj1 for maintaining
    • By Gorec
      Hi.
      I apologize in advance if I didn't post in the right category and if my title and description aren't specific enough :c
       
      My config in a nutshell:
      CPU: i7 5820k GPU: MSI GTX 1060 3GB RAM: 16 GB MOBO: MSI X99 SLI PLUS I attached RunMe output with all the details of my built.
       
      Some background:
      I have my Hackintosh for about half a year. That time I managed to make it works and fix major issues, but some of them left unresolved since then and I ignored them until now.
      I use my Hackintosh for Adobe projects (PR, AE, PS, IL, AU and a lot more) - most of them connected with video editing of course browsing with Chrome and other small tasks.
       
      Problems:
      Random restarts - this is the biggest one. I'm starting to work on bigger and bigger projects and at this time I think I can't allow this to happen that often. In the past, they happened like once a day or a couple of times a week. However, now it's just frustrating when it happens even 5 or more times a day. I've tried to observe and find out what can be the cause but I haven't managed to find any connections. I thought it happens when Premiere or another app is using GPU, but I haven't seen increased usage when it restarts. I think that it can be connected with GPU, memory or PSU or... meh, anything else. I don't have resources to check if it'll work with other components. There should be some fix for this. I will really appreciate any help with this :c Restart instead of shutdown & sleep doesn't work. I've tried to look through some Google results for this and tried many solutions (as you can see in attached Clover folder), but I think the right one for many of these issues is to make my own DSDT. Glitches, freezes and other things while encoding a video. It happens very often when I try to do this. Maybe it is an issue with GPU or (hopefully) only with GPU drivers which can be fixed with some patch. Today my headphones stopped working. I have a multi-output device configured in the Audio MIDI Setup app which includes my headphones (HyperX Cloud via USB) and Soundflowerbed virtual audio device for capturing system audio. Today while I was trying (like 15 times) to encode a video in Media Encoder in the background and watch video on YouTube I stopped hearing anything from my system. Of course, it restarted a couple of times as always, but even this didn't solve this. If I plug them directly with mini jack (not via USB Soundcard which was in the box and which I always used) in the front IO or the back I only hear some loud noise It takes EX-Fat formatted volumes a few minutes to mount after each restart. I found a workaround to format it with NTFS since I have Tuxera installed and I will reformat these volumes when I will find time for this, but maybe there is some fix for this. GPU is a little bit hot. HW Monitor shows it is only 45-55 degrees, but for my hand is a little bit hot, idk. Also related to GPU - glitch after POST but before entering Clover boot menu. It is a black screen with little white squared glitches for a few seconds. Maybe it indicates the GPU drivers are loading, but maybe it shouldn't be like this. And if I can ask about that - I can't make all applications hide on startup. I, obviously, have "Hide" checkbox checked on every login item in settings, but it doesn't work, none of the apps is hidden in the dock. Is there a way to fix this? Also a small but annoying problem - I can't turn off permanently Mojave update notification (since I tried to install it, and I had to reverse to High Sierra because I had a black screen and I didn't have time for repairing all of them. Tags are not working in Finder - every time I tag a file or folder and make a change in it (for example save a text file) the tag disappears.  
      So, with knowing all of that, is there a way to make a proper DSDT file for my Hackintosh? I tried to look through some guides on how to make it but I think I reached my abilities to understand how Mac OS works and what all of these things are, so I'm asking you guys politely, would someone like to help me? At least with these random restarts? :/
      I really begin to think that I'm a newbie in configuring all of that Clover things - even after what I managed to do with my PC. Help me, pleease... :c
       
      If you have any questions post it below, I will really appreciate any help <3
      Send me MBP-Gorec.home.zip
    • By arsradu
      Hi guys,
       
      So, this little tutorial is meant to help people fix a new issue with Mojave: opening jpg files (looks like it happens with larger files, not so much with smaller ones) using Quick Look (on spacebar key pressed) or Preview app, using the dedicated GPUs.
      The issue is that, when trying to open jpg files (for some reason, it doesn't occur with pngs), the pop-up window would remain in an endless loop. And from that point forward, any other app trying to open the same file will either become unresponsive (in the case of the Preview app) or just stay in endless loop (in case of Quick Look)
       
      As a workaround, in case the tutorial below doesn't work for you, you can use Grab (built-in app in MacOS) to open said files.
       
      This issue DOES NOT occur using the iGPU. So...if you're comfortable using the iGPU, just switch to that and you should be good to go. You don't need this tutorial.
       
      This tutorial is based on @Cyberdevs' research and testing on this topic (especially useful if you're using an RX series AMD video card), and my own very limited time testing this on my rig. I just thought it would be useful to create a new thread for it so that people can discuss this particular issue here.

       
      With that being said, I'll just move on to the actual tutorial.
       
      New (probably better) method.
       
      Switch your SMBIOS in Clover config in regards to the dedicated GPU you're using, instead of the CPU. Take a look here and choose the corresponding SMBIOS closest to your hardware.
      Yeah, that's it.
       
      In case you lose CPU PM with this method, there are multiple ways to fix that, and they do not make the object of this thread.  It worked perfectly fine for me though and I didn't need to change anything else.
       
      Alternatively, you can also try one of the MacPro SMBIOSes, such as MacPro5,1 or MacPro6,1. It was tested multiple times and it showed good results. 
      Keep in mind that choosing these will most likely not show you an iGPU in System Report, since those machines generally (probably all of them) use Xeon CPUs with no iGPUs either.
       
      A simple Lilu plugin
       
      Thanks to vulgo for the plugin and @Matgen84 for sharing and testing it, we now have yet another possible solution to this issue. It's a Lilu plugin (which means that it requires Lilu.kext in order to work) it's called NoVPAJpeg, and it can be downloaded from here.
      You use it as a regular kext, alongside Lilu. I prefer (and recommend) using it within the EFI folder, in Clover/kexts/Other. But if you want to use it in S/L/E, that should work just fine.
       
      More info can be found in this post here.
       
      In case you wanna try alternative medicine  ...
       
      The main thing we need to do is actually very simple: we need to enable the iGPU (integrated GPU) by default, in BIOS, while actually being connected to the dedicated GPU.
       
      For ATI GPUs (curtesy of @Cyberdevs' post here).
       
      The discreet GPU should be set as primary in BIOS and your displays should be connected to your discreet GPU
      The iGD/iGPU/iGFX must be enabled in BIOS/UEFI as the secondary GPU.
       
      I removed the DSDT Reconfigured the config.plist to and removed some flags which weren't needed because of the DSDT added the InjectATI + Ornioco Framebuffer (I removed the Orinoco framebuffer because of some weird glitches but it might be useful for other AMD GPUs if you inject the correct framebuffer according to your GPU. No need to inject anything for nVidia GPUs unless your GPU needs it) Added the InjectIntel + ig-platform-id for my intel HD530 (for intel HD 530 I use the 0x19120001 ig-platform-id)  
      Steps 5 to 7 might not be necessary I just did them anyway, if anyone succeeded to get quicklook working without those steps let me know so I can exclude those steps.

           Also confirmed to work with AMD R9 270X on a SandyBridge rig (without an iGPU) using WhateverGreen + Lilu kexts, which also helped to solve the transparency issue along with the Quick Look problem, it also resolved the buggy Screen Capture (Command+Shift+5) issue as well. 
       
          Also, do:
      nvram cleanup kextcache & prelinked kernel rebuild reboot  More info on that here.
       
       
      For NVIDIA GPUs
       
      This is what I needed for my NVIDIA rig and the MSI motherboard in the signature. Your milage may vary, depending on your hardware. But, the idea should be the same regardless.
       
         For MSi motherboads (check out my motherboard details in the signature)
       
      Set your BIOS to use PEG (dedicated GPU) so you can boot.
      Since you're reading this, chances are that you're already connected to the dedicated GPU and the BIOS is set to PEG. So just go into BIOS and see if you're using the iGPU or the dedicated (PEG) graphics device by default.
      If you're already using this, skip to Step 3 (the part AFTER Reboot). Reboot (I think you don't necessarily need to boot into the OS...but you do need to reboot at least until Clover UI) Reboot back into BIOS and set it from PEG to IGD (integrated graphics) WITHOUT removing the cable. Save Reboot again.  
         The result should be that the OS is tricked into thinking you're booting with the IGPU when in fact you're using the dedicated GPU.
       
         For Gigabyte motherboards
       
         Set:
      Peripherals -> Initial Display Output -> iGFX Chipset -> Internal Graphics -> Enabled
           DVMT Pre-Allocation -> default 64M.
           DVMT Total Gfx Mem -> default 256M Save Reboot  
         You should do this with the cable connected to the dedicated GPU.
       
      You will also need to patch the iGPU from Clover config.
      1. Graphics -> Inject Intel (UNCHECK Inject Nvidia or ATI if it's checked).
      2. ig-platform-id (in my case for Intel HD 4600 Desktop) it was: 0x0d220003
       
      And use IntelGraphicsFixup.kext (now included into WhateverGreen.kext) in Clover/kexts/Other. In my particular case, without the kext, I would get freezes in Safari.
       
      Another way to activate the iGPU while having the dGPU set as primary is by going into BIOS/SAG/Graphics Configuration/iGPU and setting Multi-Monitor to [Enabled], all the rest remains on [Auto], and set Inject/Intel to [True] in Clover config.*.
       
      Thanks to @gjw for the tip.
       
      *Motherboard dependent. But the multi-monitor option might be the same regardless of manufacturer.
       
       
      This might be a bug with Mojave and it could be fixed by Apple in the future. but in the meantime, feel free to use this if it helps you fix the issue.
       
      For HP motherboards (including laptops), so far no solution, unless the BIOS somehow allows to switch from dGPU to iGPU and vice-versa.
       
      Cheers!
×