Jump to content
Kinspappy

Need help with DSDT patch for Gigabyte GA-Z170X-Gaming 7 with i7 6700k on High Sierra install

13 posts in this topic

Recommended Posts

Please help with DSDT patch for Gigabyte GA-Z170X-Gaming 7 with i7 6700k.  This is my first hackintosh build and have done a lot of research/reading the last several days.  I went with what is supposed to be a vanilla install of High Sierra.  This was after trying to install Mojave and then realizing my video card doesn't have Nvidia web drivers for it.  Probably installed High Sierra 6 or so times trying to get it right.  Still don't have HDMI audio working, but have a DP2HDMI adapter coming in the mail.  As I understand, that is supposed to fix it.  My motherboard audio doesn't work right either.  The digital output works as well as the line out, but the headphone port does not.  I don't know about the other sound ports  My usb 3.1 port doesn't work when waking from sleep.  I am sure there are other issues that I haven't found/don't know about yet.  Attached is my runme app files.  Any help with this would be greatly appreciated!!!

 

Thanks!

Kinspappy

 

OS X version: High Sierra 10.13.6

Motherboard model: Gigabyte GA-Z170X-Gaming 7 (revision 1.0)
Bios version: F22m (most current)
Processor: 4.01 GHz Intel Core i7 6700k
Graphics: ASUS NVIDIA GeForce GTX 1070 8191 MB

Send me StealthDragon.zip

Edited by Kinspappy
Forgot to attach runme app files

Share this post


Link to post
Share on other sites
Advertisement
7 hours ago, Kinspappy said:

Thanks for the quick response!  I added the RunMe app files to the first post.

DSDT.aml.zip

 

use 

 

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

Share this post


Link to post
Share on other sites
12 hours ago, MaLd0n said:

DSDT.aml.zip

 

use 

 

change GFX0 to IGPU
47465830 
49475055 

change HDAS to HDEF
48444153 
48444546 

change HECI to IMEI
48454349 
494d4549 

change SAT0 to SATA
53415430 
53415441 

Thanks again for the help!

 

So here I have been reading all of these forum posts where someone asks you for help and then you say run the RunMe.app and post the zip.  So I decide that I need help to, but now I realize I not sure of what to do next.  Anyways, this is what I did do with what you replied.  I unzipped the DSDT.aml file and copied it to my EFI/CLOVER/ACPI/patched folder.  Then I added all the changes you replied with into the ACPI section of clover configurator for my config.plist and rebooted the computer.  I hope that is correct.  Not sure I saw any changes looking at my config.plist.

 

On a different note, for some reason I remember some posts where you sent people a clover folder to copy over the one they have.  I thought it was to fix what they had wrong.  Maybe it's just late and I am not remembering correctly.  Or hopefully it's because my install isn't really that screwed up.

 

Edited by Kinspappy
spelling error

Share this post


Link to post
Share on other sites
6 hours ago, Kinspappy said:

Thanks again for the help!

 

So here I have been reading all of these forum posts where someone asks you for help and then you say run the RunMe.app and post the zip.  So I decide that I need help to, but now I realize I not sure of what to do next.  Anyways, this is what I did do with what you replied.  I unzipped the DSDT.aml file and copied it to my EFI/CLOVER/ACPI/patched folder.  Then I added all the changes you replied with into the ACPI section of clover configurator for my config.plst and rebooted the computer.  I hope that is correct.  Not sure I saw any changes looking at my config.plst.

 

On a different note, for some reason I remember some posts where you sent people a clover folder to copy over the one they have.  I thought it was to fix what they had wrong.  Maybe it's just late and I am not remembering correctly.  Or hopefully it's because my install isn't really that screwed up.

 

extract new SEND_ME with new files

Share this post


Link to post
Share on other sites
1 hour ago, MaLd0n said:

extract new SEND_ME with new files

Good Morning MaLd0n!  At least here it is.

 

Here is my new SendMe.app files.  I guess since you didn't tell me what I did in my last post was wrong, I am okay.  Are all the kexts I have needed?  I know I had WhateverGreen because my system wouldn't boot without it.  When I read up on the USBInjectAll kext on RehabMan's GitHub it talked about only using the port limit patch temporarily and instead talked about using FakePCIID_XHCIMux.  I will be reading up on that again to learn more about it.  I am quite sure I need the other ones for various reasons.  AppleALC for audio. AtherosE2200Ethernet for my E2400 LAN chip.  IntelMausiEthernet for my Intel GbE LAN chip.  Lilu to support some of these kexts.  FakeSMC which is required by a Hackintosh for booting the system.  I know you know all of this, but just want to be sure I am doing things right and learn what I can.

 

So, on today's list is to figure out my USB ports and sound ports.  Right now my headphones port still doesn't work.

 

On a side note, for anyone else that may read this, I have had trouble the first couple of times I ran the RunMe.app.  The first time I let it sit for probably around 45 minutes, since it did say after prompting for my password that it may take awhile.  I then figured out that you can't have IOReg or Clover Configurator open.  Maybe even MaciASL.  Also had my EFI mounted which may have been a problem.  No when I run the RunMe.app, I make sure no associated apps are running and my EFI is not mounted and takes my system less than a minute in a half to finish after entering my password when it prompts.  I suppose "may take awhile" is relative to the person reading it.

 

As always, Thanks again!

Kinspappy 

Send me StealthDragon.zip

Share this post


Link to post
Share on other sites

Nice!  Looks like I may need to find/install codeccommander to help with my Creative CA0132 on board audio issues according to a post you made to someone else on this forum.  Looks like I have some reading to do!

Edited by Kinspappy

Share this post


Link to post
Share on other sites
3 hours ago, MaLd0n said:

looks good

 

for audio u can check infos here

 

 

So, I watched and paused the video multiple times, but still ran into problems.  After step 1 checking the device it says "-Find the audio device in DSDT", then "-Search for _ADR0x001B000" (this is with 3 zeros at the end).  Though later in the video it shows a search in 1 of the examples as being done with 4 zeros at the end.  This confused me a bit, but I press on.  So, I open up my DSDT.aml file in MaciASL and search, but nothing with the three zeros at the end come up.  What does come of are 8 lines with 0x001B0000 through 0x001B0007.  The device listed 2 lines above each of them was RP17 through RP24.  Though I later found a line that was already listed as 0x001F0003 with a device listed 2 lines above as HDEF.

 

After a bit of trial and error, I went with my 0x001B000 must have already been changed to 0x001F0003.  So, I just change the HDEF to HDAS compile, save as, copy to my patched folder and reboot.  Now I am in the process of testing the headphone port while changing the layout id in clover configurator under devices then rebooting.  Hopefully I did this correctly?  If not, let me know!

 

Thanks again as always!!!

Kinspappy 

Share this post


Link to post
Share on other sites
On 10/27/2018 at 2:12 AM, Kinspappy said:

After a bit of trial and error, I went with my 0x001B000 must have already been changed to 0x001F0003.  So, I just change the HDEF to HDAS compile, save as, copy to my patched folder and reboot.  Now I am in the process of testing the headphone port while changing the layout id in clover configurator under devices then rebooting.  Hopefully I did this correctly?  If not, let me know!

 

Thanks again as always!!!

Kinspappy 

 

 

 

 

Hello, can you share your EFI?

My computer configuration is the same as yours.

Thank you very much

On 10/26/2018 at 11:02 PM, Kinspappy said:

Watching video now.  Thanks!

 

On 10/26/2018 at 11:02 PM, Kinspappy said:

Watching video now.  Thanks!

Please help me!@

Edited by wzlzy1978

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By crazybirdy
      Patched OSInstaller.framework to allow macOS 10.13 installation on MBR partition.
       
      To use those patched files you must follow HowTo to create an USB installer. You can't just run the app downloaded from Mac App Store.
      The patch is made base on 落下爱@pcbeta 10.10.x MBR patch method, and more patch for 10.13 Firmware check by crazybirdy.
       
      What is this patched OSInstaller doing?
      1. Patch the MBR check, allow macOS 10.13 installation on MBR partition.
      2. Patch the Firmware check, bypass the error of "An error occurred while verifying firmware".
      3. This patched MBR OSInstaller method works with both MBR and GPT partition (GPT+recovery).
      No longer need to set new SMbiosversion, FirmwareFeatures, and FirmwareFeaturesMask with this MBR-patch.
       
      What's the difference between createinstallmedia method, MBR-Manual-Method, and MBR-Automatic-Method?
      As the following....
      1. createinstallmedia method,
          needs stage 1, stage 2 installation process, which is worked with GUID partition only.
      2. MBR-Manual-Method (same as 10.12),
          install via stage 2 manually, which is worked with both MBR and GUID, HFS+ and APFS.
          We can manually format as MBR or GPT, HFS+ or APFS on installation screen like as 10.12.
          We can manually select MBR HFS+ partition to install 10.13 and 10.14 on installation screen now.
          Needn't to update the MBR-Manual-Method files, it will still work on 10.13, and 10.14 future versions, I think so.
          It can be installed as Fresh installation on formated blank partition only, but can't be installed as update from previous version.
      3. MBR-Automatic-Method (new for 10.13+),
          install via stage 2 automatically, which is worked with both MBR and GUID, HFS+ and APFS.
          It can be installed as Fresh installation on formated blank partition, and can be installed as update from previous version.

      How to make 10.13 installer for MBR (MBR-Manual-Method)?
      Just use EasyMBR-InstallerMaker to make installer, it works with both MBR and GPT.
      Read HowTo inside the dmg first, same as 10.12.
      Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      Read HowTo Q/A Q7. How to update 10.13.x combo-update to MBR and GPT with installScript directly?

      How to make 10.13 installer for MBR (MBR-Automatic-Method)?
      Just use 13MBRinstallerMaker to make installer, it works with both MBR and GPT.
      Read HowTo inside the dmg first, new for 10.13+.
      Read HowTo Q/A Q6. How to download the full installer app via swscan.apple.com, instead of App Store?
      Read HowTo Q/A Q7. How to update 10.13.x combo-update to MBR and GPT with installScript directly?
       
      And, need a SMBIOS supported with /System/Library/CoreServices/PlatformSupport.plist.
       
       


       
    • By jamesxxx1997
      Hi everyone~
      Now using mojave 10.14.4 , I am patching my dsdt and ssdt but have four syntax error with my dsdt.dsl , and I don't know how to fix it.
       
      My specs:
      lenovo thinkpad x1 yoga 3rd
      CPU : i7-8550u
      graphics : uhd620
       
      The file of my dsdt and ssdt , ioreg , and my efi is in this link:https://drive.google.com/drive/folders/1T1nv1QgqDtczXrohdlQUJ_8O-kPpoSEf?usp=sharing
       
      thanks!
    • By bcuraboy3
      Good morning everyone. I have a HP Pavillion with the following specs
      I have managed to install MOjave on it, using Rehabman's config for Intel HD5500. 
      But I need some help with a DSDT for it.
      Would anyone be kind enough to have a look at the zip file, which contains the EFI folder, a IOREG, and some screenshots from DPCI Manager,
      and help me with a good DSDT patched and a correct config.plist for it?   
      Thank you very much.  Highly appreciated 
      I have also included a report from Aida64 in case anyone needs it 
       
      15-p200np
       
      Número do equipamento
      L5Z67EA
      Microprocessador
      Intel Core i7-5500U com placa gráfica Intel HD 5500 (2,4 GHz, 4 MB de cache, 2 núcleos);
      Memória
      SDRAM DDR3L de 4 GB a 1600 MHz (1 x 4 GB)
      Placa de vídeo
      NVIDIA GeForce 840M (DDR3 dedicada de 2 GB) >>  disabled already using the config.plist provided 
      Disco rígido
      SATA 1 TB 5400 rpm
      Unidade multimédia
      Gravador de DVD SuperMulti
      Visor
      HD BrightView com retroiluminação WLED de 39,6 cm (15,6 pol.) na diagonal (1366 x 768)
      Placa de rede
      Ethernet LAN Base-T 10/100 integrada
      Conectividade sem fio
      Combo 802.11b/g/n (1x1) e Bluetooth 4.0 (compatível com Miracast) >> It's not supported, but a DW1550 it's on it's way 
      Som
      BeatsAudio com 2 altifalantes >>  it's a ALC 290 
      Teclado
      Tamanho completo tipo ilha com teclado numérico
      Dispositivo
      HP Imagepad com suporte de gestos multi-toque
      Portas externas
      1 leitor de cartões multimédia SD multi-formato
      1 HDMI
      1 combinação auscultadores/microfone
      1 USB 2.0
      2 USB 3.0
      1 RJ-45
      Dimensões
      38,45 x 26,02 x 2,39 cm
      Peso
      2,27 kg
      Alimentação
      Transformador de alimentação CA de 65 W
      Polímero de iões de lítio 4 cél. 41 Wh
      Câmara
      Câmara Web HP TrueVision HD (frontal) com microfone digital de matriz dupla integrado
      Mac-Pro-Noi.zip
      Report.htm
    • By fusion71au
      Clover r4961 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4961 for VMware.zip". Mount Clover-v2.4k-4961-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&amp;t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×