Jump to content
Sign in to follow this  
Followers 0
Haive_Music

Need some help with DSDT and SSDT with hotplug and weird characters

7 posts in this topic

Recommended Posts

Hey guys,

 

I'm really hoping someone has the experience and ability to help me iron out the last remaining issue on my build.  

 

The motherboard is: Gigabyte Z370 Aorus Gaming 7 and I'm running a Alpine Ridge thunderbolt card (Revision 2).   I've gotten everything working for the most part with the exception of Thunderbolt hotplug.  This is the last piece of the puzzle.  I've tried so many different DSDT/SSDT's, cable plugged in, and unplugged, without any luck at all. 

I've managed to get my Focusrite Clarett 8Pre Thunderbolt working and it's showing up under the PCI section.  It works great, until I shut the device off and turn it back on.  I'd really like to try to get this hotplug issue sorted out, but I've had absolutely no luck so far.

 

I've managed to get the Alpine Ridge NHI and USB controllers showing up in the PCI section too, but for some reason, the USB lists a bunch of ',,,,,,,,' after the name. 

 

 

I'll be the first to admit - I don't really know a whole lot about what I'm doing with this stuff, but I've attached relevant files in hopes someone more experienced and knowledable can help me get this working.  

 

Thanks guys!

config.plist

DSDT.aml

John’s iMac.iojones

Screen Shot 2018-10-09 at 2.39.16 PM copy.png

SSDT-TB3.aml

Edited by Haive_Music

Share this post


Link to post
Share on other sites
Advertisement

Hey Foskvs.  Thanks for the reply.  I do understand that, but I still feel it's at least an indication of the system being configured and working properly.

 

A perfect example of this was the many SSDT's I tried in an attempt to get thunderbolt hotplug to work, and my Focusrite was being detected as an 'unknown multimedia device' and I had an icon in the upper right hand tray that had an 'Eject multimedia card'.  Once I messed around with the SSDT (again, I have no idea what I'm doing with it, just randomly trying things), that tray icon went away, and my Focusrite interface was recognized and behaving correctly.

 

 

In either case, I'm far less concerned about the ',,,,,,,' in the name.  My main goal is to find someone who knows what they're doing when it comes to getting thunderbolt hotplug to work.  I've tried everything I could on my end, and have failed.

Share this post


Link to post
Share on other sites

I’m afraid to tell you that your feeling is wrong...

Look at real Macs. PCI is empty, but the system is configured correctly.

SSDTs don’t inject only PCI properties.

By the way to change those properties, you need to edit _DSM Methods related to the device.

Share this post


Link to post
Share on other sites

Foskvs - The PCI section aside, the behavior of the system changed when I messed around with this SSDT.  I do not get a 'Eject Media Card' tray icon now, where as before I did.  Obviously, since that's literally the only change that has been made, and it changed the behavior of how the device operates and is recognized under OSX then yes - there's more to it than 'your feeling is wrong'.  Again, I completely understand that the PCI section is purely cosmetic - I'm not saying that it isn't, but I'm saying that there's a distinct correlation between the SSDT and how the system is recognizing and interacting with the device.  Perhaps that was simply a side effect of the SSDT having a more appropriate configuration for my device?  I don't know - but again - it changed the behavior of the device under OSX: plain and simple.   Maybe that SSDT changed the _DSM methods then? I don't know?  Again... just as I said multiple times now, I have no idea what I'm doing with them and am trying to learn and gain an understanding of it on my own (which I'm not having much luck doing), and thus here I am inquiring and asking people who have more experience and expertise than myself here for their aid and help.  In either case, cosmetic section aside - I'm truly after getting thunderbolt hotplug to work, and I feel like we're getting hung up on trivial/meaningless/irrelevant tangent here that's completely unrelated to the core of the issue. 

 

 

 

Mald0n - Sorry man.  I appreciate your response, but... I have no idea here how how to put that in to the SSDT.  Is that to help get hotplug working?

 

Edited by Haive_Music

Share this post


Link to post
Share on other sites

Hey there Haive_Music, I have a build where a Presonus Quantum 2 interface is shown as unknown device, I think similarly to your problem. Any idea what you might have fiddled with in the SSDT?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DoZe
      Hi :0)
       
      Hope As usual a perfect matching DSDT for this good Laptop.
       
      Regards, Ray
       
       
      SendMeStudiMac.zip
    • By MaLd0n
      --Donations via PayPal--
      https://tinyurl.com/r2bvzm7
       
      --Original Topic--
      https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches/
       

       
      -Perfect HackBook, HDMI Audio/Video, Bluetooth, AirPlay, Sleep, Lid Sleep, Auto Sleep, Audio, etc!
      -Wifi card has been replaced with Dell DW1560!
      -I'm using a S145-15IWL Model with Intel Core i5 8265u / Intel UHD Graphics 620
      -Update bios/uefi to last version
       
      --Installation--
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Clover Folder--
      Just paste EFI folder inside EFI partition
      https://www.olarila.com/files/Clover.Folder/Lenovo IdeaPad S145.zip
      Notebooks with ELAN trackpad use it with my folder above
      IdeaPad S145 ELAN.zip
       
      Bluetooth Broadcom
      Bluetooth Broadcom.zip
       
      CPUFriend for i5-8265U
      CPUFriend i5-8265U.zip
       
      --Full DSDT Patches--
      -My DSDT
      DSDT Lenovo IdeaPad S145.zip
       
      This DSDT work on S145-14IWL, S145-15IWL, V14-IWL, V15-IWL models
      -Patches
      -FIX ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 11 ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PRWs -_DSMs -PNLF -BRIGHTNESS KEYS -I2C -NATIVE USB -ARPT -GFX0 -DTGP -kUSBCompanionIndex -io-device-location -FULL RENAMED DEVICES   --IGPU Patch--
      Video solution with HDMI Audio and Video
      <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>AAPL,GfxYTile</key> <data> AQAAAA== </data> <key>AAPL,ig-platform-id</key> <data> CQClPg== </data> <key>device-id</key> <data> pT4AAA== </data> <key>enable-hdmi20</key> <data> AQAAAA== </data> <key>framebuffer-con0-alldata</key> <data> AAAIAAIAAACYAAAA </data> <key>framebuffer-con0-enable</key> <integer>1</integer> <key>framebuffer-con1-alldata</key> <data> AQEJAAAIAADHAQAA </data> <key>framebuffer-con1-enable</key> <integer>1</integer> <key>framebuffer-con2-alldata</key> <data> AgYKAAAEAADHAQAA </data> <key>framebuffer-con2-enable</key> <integer>1</integer> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> <key>framebuffer-unifiedmem</key> <data> AAAAgA== </data> <key>hda-gfx</key> <string>onboard-1</string> <key>model</key> <string>Intel Corporation, Cannon Point-LP Iris Plus Graphics 655</string> </dict>   --Native USB Fix for Notebooks - No Injector/Kext Required--
      https://www.olarila.com/topic/6878-guide-native-usb-fix-for-notebooks-no-injectorkext-required/
      https://www.olarila.com/topic/6181-guide-native-usb-fix-for-desktops-no-injectorkext-required-skylake/
       
       
      -ScreenShots

































      -Links
       
       
      Clover https://github.com/CloverHackyColor/CloverBootloader
      AirportBrcmFixup.kext https://github.com/acidanthera/AirportBrcmFixup
      AppleALC.kext https://github.com/acidanthera/AppleALC
      Brcm Bluetooth https://github.com/acidanthera/BrcmPatchRAM
      Lilu.kext https://github.com/acidanthera/Lilu
      SystemProfilerMemoryFixup.kext https://github.com/Goldfish64/SystemProfilerMemoryFixup
      VirtualSMC.kext https://github.com/acidanthera/VirtualSMC
      VoodooI2C.kext https://github.com/alexandred/VoodooI2C
      VoodooPS2Controller.kext https://github.com/acidanthera/VoodooPS2
      WhateverGreen.kext https://github.com/acidanthera/WhateverGreen
      MaciASL - https://github.com/acidanthera/MaciASL
      acpica - https://github.com/acpica/acpica
      AptioMemoryFix.efi https://github.com/acidanthera/AptioFixPkg
      ApfsDriverLoader.efi https://github.com/acidanthera/AppleSupportPkg
      HFSPlus.efi https://github.com/JrCs/CloverGrowerPro/blob/master/Files/HFSPlus/X64/HFSPlus.efi?raw=true
      Hackintool https://github.com/headkaze/Hackintool
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
       
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
       
      We're all here to have fun and learn from each other!
    • By kevin_1351
      tl;dr: VirtualSMC causes me a flood of log messages and correlated cpu spikes. FakeSMC doesn't.
       
      Hi, I have almost finalized my Huawei Matebook X Pro Opencore setup and everything is working very well besides wifi/bt ofc (which is about to change).
       
      However, I noticed how the cpu usage sometimes went up a little and when looking at the Console I could see a never-ending flood of:
      default 14:05:05.983292+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:05.982975+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:05.982996+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:06.985932+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:06.985949+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:06.986134+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:39.426574+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:39.426729+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:39.426585+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:41.431085+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:41.431097+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:41.431246+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:42.433068+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:42.433227+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:42.433078+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:43.434453+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:43.434465+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:43.434622+0100 loginwindow clamshellStateChanged | Clamshell state changed: closed=0, shouldSleepWhenClosed=2 default 14:05:44.436155+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0 default 14:05:44.436166+0100 kernel PMRD: clamshell closed 0, disabled 0, desktopMode 0, ac 0 sleepDisabled 0  
      As you can see, multiple of these per second. Another guy with the same computer is also having this issue and posted a dsdt change to fix it. This fix didn't solve anything though
      He tried to limit the Notify call by implementing a state change requirement before calling Notify.
       
      Here is the original acpi:
      Scope (_SB) { Device (LID) { Name (_HID, EisaId ("PNP0C0D") /* Lid Device */) // _HID: Hardware ID Method (_LID, 0, NotSerialized) // _LID: Lid Status { Local0 = One Local0 = ^^PCI0.LPCB.EC0.RPIN (0x05, 0x06) If ((Local0 == 0x55)) { Local0 = Zero } Else { Local0 = One } ^^PCI0.GFX0.CLID = Local0 Return (Local0) } } Device (PWRB) { Name (_HID, EisaId ("PNP0C0C") /* Power Button Device */) // _HID: Hardware ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0B) } } } Scope (_SB.PCI0.LPCB.EC0) { Method (_Q81, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF { Local0 = ^^^^LID._LID () If ((Local0 == Zero)) { ADBG ("LID-OFF") SGOV (0x02030009, Zero) SGOV (0x02060000, Zero) } Else { ADBG ("LID-ON") SGOV (0x02030009, One) SGOV (0x02060000, One) Notify (ALSD, 0x80) // Status Change } Notify (LID, 0x80) // Status Change } } Which he changed to: 
      Scope (_SB) { Device (LID) { Name (_OLD, One) // assuming everything else.. the lid should start open? Name (_HID, EisaId ("PNP0C0D") /* Lid Device */) // _HID: Hardware ID Method (_LID, 0, NotSerialized) // _LID: Lid Status { Local0 = One Local0 = ^^PCI0.LPCB.EC0.RPIN (0x05, 0x06) If ((Local0 == 0x55)) { Local0 = Zero } Else { Local0 = One } Return (Local0) } } Device (PNLF) { Name (_HID, EisaId ("APP0002")) // _HID: Hardware ID Name (_CID, "backlight") // _CID: Compatible ID Name (_UID, 0x0A) // _UID: Unique ID Name (_STA, 0x0B) // _STA: Status } Device (PWRB) { Name (_HID, EisaId ("PNP0C0C") /* Power Button Device */) // _HID: Hardware ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0B) } } } Scope (_SB.PCI0.LPCB.EC0) { Method (_Q81, 0, NotSerialized) // _Qxx: EC Query, xx=0x00-0xFF { Local0 = ^^^^LID._LID () If ((Local0 == Zero)) { ADBG ("LID-OFF") SGOV (0x02030009, Zero) SGOV (0x02060000, Zero) } Else { ADBG ("LID-ON") SGOV (0x02030009, One) SGOV (0x02060000, One) Notify (ALSD, 0x80) // Status Change } If ((^^^^LID._OLD != Local0)) { Notify (LID, 0x80) // Status Change ^^^^LID._OLD = Local0 } } } Besides me not seeing any reason to declare _OLD in LID. The idea itself shouldn't be too bad right? Well, as I said, his fix didn't work.
       
      In fact, to prove that Method _Q81 doesn't have anything to do with the issue at all, I created a Clover/Opencore patch to change _Q81 to XQ81. This resulted in my lid not working at all of course, but the log flooding still persisted!
      So _Q81 doesn't have anything to do with the issue afaik.
       
      Now, further Google searches led me to a chinese post where he tied the issue to VirtualSMC. And indeed, by migrating to FakeSMC the issue is no more.
       
      Unfortunately, I'm very fond of VirtualSMC for various reasons. So I would very much like to keep it. If not I'd have to implement the old way of doing Battery monitoring etcetc. Which isn't very elegant and update proof as it requires DSDT patching.
       
      So, I do believe that the issue may very well be in the DSDT code, perhaps in the ambient light part. I'm not very skilled at this and just started studying the ACPI spec 3 days ago.
       
      Could someone please help me out? Thanks a lot in advance
       
       
      origin.zip
      OC.zip
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://www.olarila.com/topic/5165-olarila-app-images-and-folders/   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell   https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Skylake, Kabylake and Coffeelake is here https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
          First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://github.com/CloverHackyColor/CloverBootloader/releases   --Replace with my Clover folder https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://www.olarila.com/topic/5676-clover-folder-for-all-chipsets/   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×