Jump to content
ludufre

[Guide] Gigabyte GA-Z370N-WIFI + i7 8700K + UHD 630 + Mojave 10.14

47 posts in this topic

Recommended Posts

Installing macOS Mojave 10.14 on Gigabyte Z370N WIFI + i7 8700K + UHD 630

image.thumb.png.5ae699513a2e4e5fb095b93757238fb2.png



Changelog:

 

10/17/2018 08:12h GMT-0

- Fix Kexts permissions commands adjusted.

- Removed FrameBuffer patch that is not needed.

- Added audio solution and HDMI.

- Unfortunately DisplayPort does not work.

- Replaced Wifi/BT with DW1560 (BCM94352Z)

 

10/11/2018 04:15h GMT-0

- Added USB 3.0 patch.

- Adjusted some steps.

- Changed text formatting.

 

10/11/2018 03:42h GMT-0

- Added missing UEFI configuration.

 

10/07/2018 00:36h GMT-0

- First version.

 

What works and what does not
 
- Processor -> Tick.png Work. All SpeedStep stages.
- Video Card -> Tick.png Work. QE/CI and Metal.
- Chipset -> Tick.png Work.
- HDMI (1st) -> Tick.png Work.

- HDMI (2nd) -> Tick.png Work.

- DP -> Cross.png Not work.

- Audio -> Tick.png Work.

- HDMI Audio -> Tick.png Work.
- WiFi/Bluetooth -> Tick.png Work. Replaced.

- Ethernet (1st) -> Tick.png Work.
- Ethernet (2nd) -> Cross.png Not work.
- USB3.0 -> Tick.png Work.
- Sleep -> Tick.png Work.

 

 
Todo

 

- Make audio work.

- Make HDMI audio work.

- Test DisplayPort.

- Make second ethernet work.

- Replace Wifi/Bluetooth.

 

 

What you need to install

- Running install of macOS
- One USB flash drive of 8GB or bigger
- macOS Mojave install app
- Clover EFI

- Clover Configurator

- Some KEXTs


How create create the install flash drive
 
Prepare install flash drive


Format the flash drive with GUID partition mapping and name it "Install".

- Open Disk Utility.
- Click in View, then "Show All Devices".
- Select the destination flash drive, then Erase.
- Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map

 

Create install flash drive

Open terminal and run this command:

sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install--nointeraction

This will take about 30 minutes.

 

image.png.dbfbb044438583c128d2b973252bc02e.png


Install bootloader

Download the CloverEFI (used 4674) and install with this options on "Install macOS Mojave":

 
- Install for UEFI booting only
- Install Clover in the ESP
- UEFI Drivers - ApfsDriverLoader-64
- UEFI Drivers - AptioMemoryFix64


image.png.72397ab3e9ce542c2a618510f55e7461.pngimage.png.172a42dffb293f26265a7e00826953dd.png

 

 

Make things works

Will be created a partition named EFI and mounted in Desktop. Edit the /Volumes/EFI/CLOVER/config.plist inside this new partition, open with Clover Configurator (used 5.2.1.0)

 

Full UHD630 Acceleration

 

config.plist (Clover Configurator): 

 

- Uncheck: Acpi - Fixes - FixDisplay

- Uncheck: Acpi - Fixes - AddHDMI

Spoiler

[Figured out that is not needed with WhateverGreen.kext and Lilu.kext]

 

- Add value: Devices - Properties - Devices*: PciRoot(0x0)/Pci(0x2,0x0)

- Add value: Devices - Properties - Devices* - PciRoot(0x0)/Pci(0x2,0x0):

                 Propertie Key: framebuffer-patch-enable

                 Propertie Value: 01000000

                 Propertie Key: AAPL,ig-platform-id

                 Propertie Value: 07009B3E

image.png.c2911f6ade6b2ae73fa45ff4e61b0ab6.png

 

 

- Change value: Gui - Screen Resolution to 3840x2160 (Your screen resolution, mine is 4k)

- Change value: Rt Variables - CsrActiveConfig to 0x3

- Select value: SMBIOS - Up/Down arrows - iMac18,1 - Intel Core i5-7360U @ 2.30Ghz (I know, it's not our processor, but is that option)

 image.png.676dbf1a708a6ad758c50302db3f05fb.pngimage.png.fd3643539222aa3eb215ca414573215a.png

 

Download those Kexts and put in /EFI/CLOVER/kexts/10.14/

 

Download the Lilu.kext from here. I used the version 1.2.7.

Download the WhateverGreen.kext. I used the version 1.2.3.RELEASE.

 

 

All USBs (2.0, 3.0, Type-C, internal)

 

config.plist (Clover Configurator): 

 

- Add value: Kernel and Kext Patches - KextsToPatch:

                 Name*: com.apple.driver.usb.AppleUSBXHCI

                 Find* [HEX]: 83FB0F0F 83030500 00

                 Replace* [HEX]: 83FB0F90 90909090 90

                 Comment: disable port limit in XHCI kext (credit PMHeart)

                 MathOS: 10.14.x

image.png.7a5f792e0b051aace92085d137e9c9bb.png

 

 

Sleep/Wake

 

config.plist (Clover Configurator): 

 

- Check: Boot - Arguments - dart=0

 

 

Audio onboard and HDMI

 

config.plist (Clover Configurator): 

 

- Change: Device - Audio Injection - layout-id to 7

 

Download those Kexts and put in /EFI/CLOVER/kexts/10.14/

 

Download the Lilu.kext from here. I used the version 1.2.7. (already installed above)

Download the AppleALC.kext from here. I used the version 1.3.2.

 

 

Wifi and Bluetooth (DW1560 / BCM94352Z)

 

Download those Kexts and put in /EFI/CLOVER/kexts/10.14/

 

Download the FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from here. I used the version 2018-1014.

Download the BrcmFirmwareRepo.kext, BrcmPatchRAM.kext and BrcmNonPatchRAM.kext from here. I used the version 2018-0505.

 

 

Mandatory Kexts

 

Download those Kexts and put in /EFI/CLOVER/kexts/10.14/

 

Download the FakeSMC.kext from here. I used the version 2018-0915.

Download the IntelMausiEthernet.kext from here. I used the version 2018-0424.

 

 

Put the Clover installer on the flash drive too.
 
Now you can start the instalation without problem (I guess).

 

 

How install

 

UEFI Setup Configuration and Installation

UEFI configuration
 
- Shutdown and insert the flash.
- Power on with DEL pressed to enter BIOS setup.
- Change value: Periphelrals - Initial Display to IGP
- Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
- Change value: Chipset - VT-d to DISABLE
- Change value: Chipset - Internal Graphics to ENABLE
- Change value: Chipset - DVMT Pre-Allocated to 128M

- Change value: Chipset - Wake On Lan to DISABLE

- Save & Exit Setup

 

- Now, hold the F12

- In the list, select your flash drive.

- It will show twice. One with UEFI prefix and another without.

- Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"

 

The installer will start. 


Format destination disk

Format the disk with GUID partition mapping and name it "HD".

- Select Disk Utility in the list, then press Continue.
- Click in View, then "Show All Devices".
- Select the destination Disk, then Erase.
- Name: HD, Format: APFS and Scheme: GUID Partition Map

Close Disk Utility.

Select "Install macOS", then Continue.
Follow instructions in screen.

After install

After first part install the system will reboot.

The second part of the installation will begin. This will take 16 minutes.
 

Post installation

Install bootloader
 
When the second part of install finish, the system will reboot again.

After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

Open the Clover installer inside flash drive that you copied before.

Use same options above but choose the system partition this time.

Now you need to replace the config.plist inside your destination disk EFI parittion with config.plist inside flash card EFI partition.

The flash drive EFI partition is unmounted. Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1.

 

Last step

 

Copy all Kexts from flash drive to /Library/Extensions, with those commands in Terminal:

sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/
sudo chmod -R 755 /Library/Extensions
sudo chown -R root:wheel /Library/Extensions
sudo kextcache -system-prelinked-kernel
sudo kextcache -system-caches

Restart the system.

 

 

It's done!


 
And last but not least
 
I would like to thank the following community members, by making these dream possible:
@crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.

 

Edited by Luan Eduardo

Share this post


Link to post
Share on other sites
Advertisement

Followed this guide to a T and installed Mojave successfully. Great work!

I do seem to experience major artefacts/glitches in the window server though. Started occurring after switching from IntelGraphicsFixup to the new WhateverGreen. Any ideas?

Share this post


Link to post
Share on other sites

I'm sorry. Notifications were turned off ...

 

In addition to installing the Kexts, did you do the procedure below? 

 

 

On 10/7/2018 at 12:16 AM, Luan Eduardo said:

config.plist (Clover Configurator): 

 

- Uncheck: Acpi - Fixes - FixDisplay

- Uncheck: Acpi - Fixes - AddHDMI

- Add value: Devices - Properties - Devices*: PciRoot(0x0)/Pci(0x2,0x0)

- Add value: Devices - Properties - Devices* - PciRoot(0x0)/Pci(0x2,0x0):

                 Propertie Key: framebuffer-patch-enable

                 Propertie Value: 01000000

                 Propertie Key: AAPL,ig-platform-id

                 Propertie Value: 07009B3E

image.png.c2911f6ade6b2ae73fa45ff4e61b0ab6.png

 

- Change value: Gui - Screen Resolution to 3840x2160 (Your screen resolution, mine is 4k)

- Change value: Rt Variables - CsrActiveConfig to 0x3

- Select value: SMBIOS - Up/Down arrows - iMac18,1 - Intel Core i5-7360U @ 2.30Ghz (I know, it's not our processor, but is that option)

 image.png.676dbf1a708a6ad758c50302db3f05fb.pngimage.png.fd3643539222aa3eb215ca414573215a.png

 

Edited by Luan Eduardo

Share this post


Link to post
Share on other sites

Displayport not working for me (monitor looses signal when driver is loaded), HDMI fine (even 4K@60Hz on 2.0 port).

I'm using iMac18,1 model, maybe need change that to enable DP port of the motherboard.

Share this post


Link to post
Share on other sites
3 hours ago, NeedForSpeed73 said:

Displayport not working for me (monitor looses signal when driver is loaded), HDMI fine (even 4K@60Hz on 2.0 port).

I'm using iMac18,1 model, maybe need change that to enable DP port of the motherboard.

I don't have the DP cable. Try and tell me if works.

Share this post


Link to post
Share on other sites

I have the same motherboard. So, this is what I did to make Audio Work:

 

In config.plist, Devices -> Audio -> Inject = 7

 

Reboot, and you will have audio over HDMI. Didn't test the actual audio ports.

Credits to Hackintosher forum.

Share this post


Link to post
Share on other sites
4 hours ago, Luan Eduardo said:

I don't have the DP cable. Try and tell me if works.

Tried many different ones (MacPro6,1 and various iMacs) with no luck. I will just reroute the cables and use HDMI.
Now I have an annoying problem with external USB drives being recognized as internal ones (and that forces me to set internal disks as visible on desktop in Finder).
I didn't do a clean install but upgraded from High Sierra (where everything was working fine, DP included), guess my configs must be a bit messed up.:(

Share this post


Link to post
Share on other sites
1 hour ago, NeedForSpeed73 said:

Tried many different ones (MacPro6,1 and various iMacs) with no luck. I will just reroute the cables and use HDMI.
Now I have an annoying problem with external USB drives being recognized as internal ones (and that forces me to set internal disks as visible on desktop in Finder).
I didn't do a clean install but upgraded from High Sierra (where everything was working fine, DP included), guess my configs must be a bit messed up.:(

 

I bought a DP cable and I also have problems. It seems that the cable is infinitely reconnecting. I'll see about this later.

 

About the external driver appear as internal i have the same issue, I think the system think the USBs are internal. Look this:

 

image.png.b3e451b2247072a1760cc7e751adf82f.pngimage.png.31f5c69af7506f639a634a8551096726.png

 

I'll try to fix it.

 

 

5 hours ago, khamsakamal48 said:

I have the same motherboard. So, this is what I did to make Audio Work:

 

In config.plist, Devices -> Audio -> Inject = 7

 

Reboot, and you will have audio over HDMI. Didn't test the actual audio ports.

Credits to Hackintosher forum.

 

Actually I don't use HDMI audio. I'm testing audio_CloverALC right now. The audio output works, but input not work because of layout-id = 2 that I'm using in place of layout-id 1 that Mojave drop it.

Edited by Luan Eduardo

Share this post


Link to post
Share on other sites
3 hours ago, Luan Eduardo said:
4 hours ago, NeedForSpeed73 said:

Tried many different ones (MacPro6,1 and various iMacs) with no luck. I will just reroute the cables and use HDMI.
Now I have an annoying problem with external USB drives being recognized as internal ones (and that forces me to set internal disks as visible on desktop in Finder).
I didn't do a clean install but upgraded from High Sierra (where everything was working fine, DP included), guess my configs must be a bit messed up.:(

 

I bought a DP cable and I also have problems. It seems that the cable is infinitely reconnecting. I'll see about this later.

 

About the external driver appear as internal i have the same issue, I think the system think the USBs are internal. Look this:

 

image.png.b3e451b2247072a1760cc7e751adf82f.pngimage.png.31f5c69af7506f639a634a8551096726.png

 

I'll try to fix it.

 

@NeedForSpeed73 Fixed it!

 

Followed this guide: Intel FB-Patcher v1.5.0

 

- Add USBInjextAll.kext to /EFI/CLOVER/Kexts/Other

- Add XHCI-300-series-injector.kext to /EFI/CLOVER/Kexts/Other

- Add Port Limit Patch (already patched in my guide)

- Restart

- Open Intel FB-Patcher

- Go to General > USB

- Insert and remove a USB 2.0 and USB 3.0 on each port

- All ports used becames Green

- Define alls connectors as USB3, except that used by the Bluetooth on Wifi Card must be Internal

- Select and delete others ports (not green)

- Click in Export

- Move the USBPorts.kext to /Library/Extensions

- Fix permissions and cache

- Remove USBInjectAll.kext, XHCI-300-series-injector.kext and Port Limit from Kernel and Kext Patches - KextsToPatch in config.plist

- Restart

 

In my case that my PC is on the bench and I don't have external ports, I have: HS03, HS04, HS05, HS06, HS07, HS08, HS10 (Internal Bluetooth), SS03, SS04, SS05, SS06, SS07, SS08.

 

Although I followed the procedure to the letter, I had a problem. After reopening the Intel FB-Patcher to verify, only until port 0x15 was appearing with USBPorts.kext that was generated. I needed to open the Kext Info.plist file with Xcode.app and change the port-count tag from <15000000> to <18000000>. 0x18 was the highest port I identified (SS08). Maybe it's an Intel FP-Patcher bug. After that, all the doors recognized normally.

image.png.943a476b04ecb24277ae41bd545cfc81.png

Edited by Luan Eduardo

Share this post


Link to post
Share on other sites

Thanks Eduardo, I followed the your guide and at a certain point, I guess before the "cleanup" of USBInjectAll and XHCI-300 everything was working. THEN, I MESSED IT ALL UP: now no USB3 port work at all with 3.0 devices (2.0 are fine).
How can I revert back and start over? I tried to re-run the USB Mohave installer, but with no luck. 

Edited by NeedForSpeed73

Share this post


Link to post
Share on other sites
On 10/7/2018 at 8:46 AM, Luan Eduardo said:

Installing macOS Mojave 10.14 on Gigabyte Z370N WIFI + i7 8700K + UHD 630

image.thumb.png.5ae699513a2e4e5fb095b93757238fb2.png



Changelog:

 

10/11/2018 04:15h GMT-0

- Added USB 3.0 patch.

- Adjusted some steps.

- Changed text formatting.

 

10/11/2018 03:42h GMT-0

- Added missing UEFI configuration.

 

10/07/2018 00:36h GMT-0

- First version.

 

What works and what does not
 
- Processor -> Tick.png Work. All SpeedStep stages.
- Video Card -> Tick.png Work. QE/CI and Metal.
- Chipset -> Tick.png Work.
- HDMI (1st) -> Tick.png Work.

- HDMI (2nd) -> Tick.png Work.

- DP -> Cross.png Not tested.

- Audio -> Cross.png Not work.
- WiFi/Bluetooth -> Cross.png Not work.

- Ethernet (1st) -> Tick.png Work.
- Ethernet (2nd) -> Cross.png Not work.
- USB3.0 -> Tick.png Work.
- Sleep -> Tick.png Work.

 

 
Todo

 

- Make audio work.

- Make HDMI audio work.

- Test DisplayPort.

- Make second ethernet work.

- Replace Wifi/Bluetooth.

 

 

What you need to install

- Running install of macOS
- One USB flash drive of 8GB or bigger
- macOS Mojave install app
- Clover EFI

- Clover Configurator

- Some KEXTs


How create create the install flash drive
 
Prepare install flash drive


Format the flash drive with GUID partition mapping and name it "Install".

- Open Disk Utility.
- Click in View, then "Show All Devices".
- Select the destination flash drive, then Erase.
- Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map

 

Create install flash drive

Open terminal and run this command:


sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install--nointeraction

This will take about 30 minutes.

 

image.png.dbfbb044438583c128d2b973252bc02e.png


Install bootloader

Download the CloverEFI (used 4674) and install with this options on "Install macOS Mojave":

 
- Install for UEFI booting only
- Install Clover in the ESP
- UEFI Drivers - ApfsDriverLoader-64
- UEFI Drivers - AptioMemoryFix64


image.png.72397ab3e9ce542c2a618510f55e7461.pngimage.png.172a42dffb293f26265a7e00826953dd.png

 

 

Make things works

Will be created a partition named EFI and mounted in Desktop. Edit the /Volumes/EFI/CLOVER/config.plist inside this new partition, open with Clover Configurator (used 5.2.1.0)

 

Full UHD630 Acceleration

 

config.plist (Clover Configurator): 

 

- Uncheck: Acpi - Fixes - FixDisplay

- Uncheck: Acpi - Fixes - AddHDMI

- Add value: Devices - Properties - Devices*: PciRoot(0x0)/Pci(0x2,0x0)

- Add value: Devices - Properties - Devices* - PciRoot(0x0)/Pci(0x2,0x0):

                 Propertie Key: framebuffer-patch-enable

                 Propertie Value: 01000000

                 Propertie Key: AAPL,ig-platform-id

                 Propertie Value: 07009B3E

image.png.c2911f6ade6b2ae73fa45ff4e61b0ab6.png

 

- Change value: Gui - Screen Resolution to 3840x2160 (Your screen resolution, mine is 4k)

- Change value: Rt Variables - CsrActiveConfig to 0x3

- Select value: SMBIOS - Up/Down arrows - iMac18,1 - Intel Core i5-7360U @ 2.30Ghz (I know, it's not our processor, but is that option)

 image.png.676dbf1a708a6ad758c50302db3f05fb.pngimage.png.fd3643539222aa3eb215ca414573215a.png

 

Download those Kexts and put in /EFI/CLOVER/kexts/10.14/

 

Download the Lilu.kext from here. I used the version 1.2.7.

Download the WhateverGreen.kext. I used the version 1.2.3.RELEASE.

 

 

All USBs (2.0, 3.0, Type-C, internal)

 

config.plist (Clover Configurator): 

 

- Add value: Kernel and Kext Patches - KextsToPatch:

                 Name*: com.apple.driver.usb.AppleUSBXHCI

                 Find* [HEX]: 83FB0F0F 83030500 00

                 Replace* [HEX]: 83FB0F90 90909090 90

                 Comment: disable port limit in XHCI kext (credit PMHeart)

                 MathOS: 10.14.x

image.png.7a5f792e0b051aace92085d137e9c9bb.png

 

 

Sleep/Wake

 

config.plist (Clover Configurator): 

 

- Check: Boot - Arguments - dart=0

 

 

Mandatory Kexts

 

Download those Kexts and put in /EFI/CLOVER/kexts/10.14/

 

Download the FakeSMC.kext from here. I used the version 2018-0915.

Download the IntelMausiEthernet.kext from here. I used the version 2018-0424.

 

 

Put the Clover installer on the flash drive too.
 
Now you can start the instalation without problem (I guess).

 

 

How install

 

UEFI Setup Configuration and Installation

UEFI configuration
 
- Shutdown and insert the flash.
- Power on with DEL pressed to enter BIOS setup.
- Change value: Periphelrals - Initial Display to IGP
- Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
- Change value: Chipset - VT-d to DISABLE
- Change value: Chipset - Internal Graphics to ENABLE
- Change value: Chipset - DVMT Pre-Allocated to 128M

- Change value: Chipset - Wake On Lan to DISABLE

- Save & Exit Setup

 

- Now, hold the F12

- In the list, select your flash drive.

- It will show twice. One with UEFI prefix and another without.

- Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"

 

The installer will start. 


Format destination disk

Format the disk with GUID partition mapping and name it "HD".

- Select Disk Utility in the list, then press Continue.
- Click in View, then "Show All Devices".
- Select the destination Disk, then Erase.
- Name: HD, Format: APFS and Scheme: GUID Partition Map

Close Disk Utility.

Select "Install macOS", then Continue.
Follow instructions in screen.

After install

After first part install the system will reboot.

The second part of the installation will begin. This will take 16 minutes.
 

Post installation

Install bootloader
 
When the second part of install finish, the system will reboot again.

After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

Open the Clover installer inside flash drive that you copied before.

Use same options above but choose the system partition this time.

Now you need to replace the config.plist inside your destination disk EFI parittion with config.plist inside flash card EFI partition.

The flash drive EFI partition is unmounted. Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1.

 

Last step

 

Copy all Kexts from flash drive to /Library/Extensions, with those commands in Terminal:


sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/
sudo chmod -Rf 755 /Library/Extensions
sudo chown -Rf 0:0 /Library/Extensions
sudo kextcache -system-prelinked-kernel
sudo kextcache -system-caches

Restart the system.

 

 

It's done!


 
And last but not least
 
I would like to thank the following community members, by making these dream possible:
@crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.

 

Can You pls upload your EFI, here? 

Share this post


Link to post
Share on other sites
6 hours ago, NeedForSpeed73 said:

Thanks Eduardo, I followed the your guide and at a certain point, I guess before the "cleanup" of USBInjectAll and XHCI-300 everything was working. THEN, I MESSED IT ALL UP: now no USB3 port work at all with 3.0 devices (2.0 are fine).
How can I revert back and start over? I tried to re-run the USB Mohave installer, but with no luck. 

 

If you followed exactly my instructions and put the genereated USBPorts.kext inside /Library/Extensions, you probably don't fixed the permissions...

 

Run this in Terminal:

sudo chmod -R 755 /Library/Extensions
sudo chown -R root:wheel /Library/Extensions
sudo kextcache -system-prelinked-kernel
sudo kextcache -system-caches

If don't work, send me the USBPorts.kext and config.plist (remove your Serial, MLB, etc)

 

5 minutes ago, Justice King said:

Can You pls upload your EFI, here? 

 

Of course, but i'm working right now. Later I attach this.

Edited by Luan Eduardo

Share this post


Link to post
Share on other sites
18 hours ago, Luan Eduardo said:
23 hours ago, khamsakamal48 said:

I have the same motherboard. So, this is what I did to make Audio Work:

 

In config.plist, Devices -> Audio -> Inject = 7

 

Reboot, and you will have audio over HDMI. Didn't test the actual audio ports.

Credits to Hackintosher forum.

 

Actually I don't use HDMI audio. I'm testing audio_CloverALC right now. The audio output works, but input not work because of layout-id = 2 that I'm using in place of layout-id 1 that Mojave drop it.

 

@khamsakamal48 Using AppleALC with Lilu I was able to make the onboard audio and HDMI work perfectly. Even with the microphone. The layout-id = 7 worked that a beauty.

 

Guide updated.

Share this post


Link to post
Share on other sites
5 hours ago, Luan Eduardo said:

 

If you followed exactly my instructions and put the genereated USBPorts.kext inside /Library/Extensions, you probably don't fixed the permissions...

 

Run this in Terminal:


sudo chmod -R 755 /Library/Extensions
sudo chown -R root:wheel /Library/Extensions
sudo kextcache -system-prelinked-kernel
sudo kextcache -system-caches

If don't work, send me the USBPorts.kext and config.plist (remove your Serial, MLB, etc)

 

 

 

 

Mess is growing: I re-run the Mojave installer and now I have problems with graphics (stutters and very long boot time due to IGPU retrying many times to do something). I attach pics of the USB situation and config.plist. But don't struggle too much on it: next week I will change some hardware on this machine (new discrete videocard) so I guess I'll do a clean install of both Windows and OSX; this one has been upgraded at least two times (since Sierra or maybe even ElCap) and I guess it's full of garbage.

Thanks for your time.

Schermata 2018-10-18 alle 01.08.14.png

Schermata 2018-10-18 alle 01.27.01.png

config.plist

Share this post


Link to post
Share on other sites

Hi @Luan Eduardo

 

please find my clover folder attached – I set up everything to use as little patching as possible.

 

DP and secondary eth work (needs modded FakePCIID_Intel_GbX.kext + SmallTreeIntel82576.kext) – running in dual-4k@60hz over here.

 

Also added ig-platform-id through ssdt-2 and some cosmetics (built-ins, device names etc).

 

Also all USB ports, including the front USB3.0 ones, work as expected.

 

Credits to @MaLd0n for the initial patched dsdt-version.

 

CLOVER.zip

 

screenshot_dual4k60.thumb.png.e892d2d45790e027af974ef00b7b3139.pngscreenshot_dual4k60-2.thumb.png.022d6070b57dee1a8801da2c47f1ce1a.png

 

Edited by TheMaxx32000
added screenshots

Share this post


Link to post
Share on other sites

F5

 

btw: not sure if CodecCommander and WhateverGreen is needed – going to check on that next week

 

Edit: Forgot to say that I'm using an original Apple BCM94360CS2 WiFi/BT card via a NGFF adapter..

Edited by TheMaxx32000

Share this post


Link to post
Share on other sites
13 hours ago, TheMaxx32000 said:

F5

 

btw: not sure if CodecCommander and WhateverGreen is needed – going to check on that next week

 

Edit: Forgot to say that I'm using an original Apple BCM94360CS2 WiFi/BT card via a NGFF adapter..

 

My system only boot with F1, tried F2, F3, F4, F5 and the new F10, and only the F1 works.

 

Tried all the three MemoryFix of Clover, tried with only one Ram module too...

 

Tried serveral UEFI options. IGFX and Discrete Card, CSM on and off, Secure Boot on and off, with everything don't work...

 

If boot with verbose, I stop in this:

 

image.thumb.png.8546284b38b43ca0c12c4939283a49d0.png

 

If don't use verbose the system reboots in loop.

Share this post


Link to post
Share on other sites
4 minutes ago, TheMaxx32000 said:

I‘ll post my bios config for this setup early next week as I am not @home right now..

 

Thank you. Meanwhile, I'll stay in F1.

Share this post


Link to post
Share on other sites
On 10/18/2018 at 11:25 AM, TheMaxx32000 said:

Hi @Luan Eduardo

 

please find my clover folder attached

It works.No second NIC 

my setup is

i5-8600, 960evo, 32gb, F10

 

On DP I am experiencing some random flickers and video artefacts and the display "reboots" often (goes off and comes back up rapidly).

HDMI appears to be solid atm will test more. 

 

edit:

Changing the DP cable fixed all the problems. Oddly enough the cable works with no problem on High Sierra. 

 

Edited by registracii

Share this post


Link to post
Share on other sites

Luan EduardoTnx.

All Works, but - "Download the BrcmFirmwareRepo.kext, BrcmPatchRAM.kext and BrcmNonPatchRAM.kext from here" - not correct link

And Bluetooth works only with all kext in package:

BrcmFirmwareRepo.kext, BrcmPatchRAM.kext BrcmNonPatchRAM.kext, BrcmFirmwareData.kext, BrcmPatchRAM2.kext and BrcmNonPatchRAM2.kext

Share this post


Link to post
Share on other sites

Hi @Luan Eduardo (I'm BR too hehe). Thanks for your post. It helped me a lot.

I hope I can help you too. I used some configs from my High Sierra setup in the mojave one and I managed to make DP and its audio interface work. I didn't tested the 2nd eth interface since I use only wifi. 

I have the exactly same build you have (i8700, z370n wifi, bcm BCM94352Z). I'ts very similar to yours except for some arbitrary device properties and some kexttopatch.

 

I hope it helps you https://www.dropbox.com/s/v4ao0vqdzvk078m/EFI.zip?dl=0

Screen Shot 2018-10-21 at 12.43.46 PM.png

Share this post


Link to post
Share on other sites
On 10/19/2018 at 1:01 PM, TheMaxx32000 said:

I‘ll post my bios config for this setup early next week as I am not @home right now..

 

@TheMaxx32000 Can you pass me your EFI configuration?

I bought 32GB and started having problems on memtest86. Only solved with F10 version, but with it I can not start macOS, I'm using Windows in the meantime...

 

On 10/21/2018 at 12:44 PM, alexiley said:

Luan EduardoTnx.

All Works, but - "Download the BrcmFirmwareRepo.kext, BrcmPatchRAM.kext and BrcmNonPatchRAM.kext from here" - not correct link

And Bluetooth works only with all kext in package:

BrcmFirmwareRepo.kext, BrcmPatchRAM.kext BrcmNonPatchRAM.kext, BrcmFirmwareData.kext, BrcmPatchRAM2.kext and BrcmNonPatchRAM2.kext

 

@alexiley Fixed

 

On 10/20/2018 at 7:12 PM, registracii said:

It works.No second NIC 

my setup is

i5-8600, 960evo, 32gb, F10

 

On DP I am experiencing some random flickers and video artefacts and the display "reboots" often (goes off and comes back up rapidly).

HDMI appears to be solid atm will test more. 

 

edit:

Changing the DP cable fixed all the problems. Oddly enough the cable works with no problem on High Sierra. 

 

 

@registracii It probably has something to do with Framebuffer.

 

On 10/21/2018 at 12:44 PM, ivan_htp said:

Hi @Luan Eduardo (I'm BR too hehe). Thanks for your post. It helped me a lot.

I hope I can help you too. I used some configs from my High Sierra setup in the mojave one and I managed to make DP and its audio interface work. I didn't tested the 2nd eth interface since I use only wifi. 

I have the exactly same build you have (i8700, z370n wifi, bcm BCM94352Z). I'ts very similar to yours except for some arbitrary device properties and some kexttopatch.

 

I hope it helps you https://www.dropbox.com/s/v4ao0vqdzvk078m/EFI.zip?dl=0

Screen Shot 2018-10-21 at 12.43.46 PM.png

 

@ivan_htp Only being able to start the system with the BIOS / EFI version F1. But I'm being forced to use the F10 version because of the new memories. As soon as I can figure it out I'll take a look. Thank you.

Edited by Luan Eduardo

Share this post


Link to post
Share on other sites
On 10/21/2018 at 4:44 PM, ivan_htp said:

Hi @Luan Eduardo (I'm BR too hehe). Thanks for your post. It helped me a lot.

I hope I can help you too. I used some configs from my High Sierra setup in the mojave one and I managed to make DP and its audio interface work. I didn't tested the 2nd eth interface since I use only wifi. 

I have the exactly same build you have (i8700, z370n wifi, bcm BCM94352Z). I'ts very similar to yours except for some arbitrary device properties and some kexttopatch.

 

I hope it helps you https://www.dropbox.com/s/v4ao0vqdzvk078m/EFI.zip?dl=0

 

gave it a try. All works well DP audio also, however I lost the BT audio. Connects to the device can be selected volume works but no sound is routed there. 

also About This Mac wont load...not a bother just 

Edited by registracii

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By karthiksh1989
      can somebody walkthrough with the mojave installation guide?
      i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
      Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
      running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
       
      https://wa.me/919611736534 (whatsapp)
    • By ltooz_audis
      I always want to have a long lasting battery ultrabook to install Mojave on. I was looking at Dell XPS 13 but its design is not very good with the camera and other problems. HP Spectre x360 is a nice design but the wifi module is soldered on board. The Envy 13" is the best one in the bunch for MacOS Mojave. I would not use any other macOS besides Mojave, it's the best one so far. If you can't get it done with macOS Mojave, you don't do it correctly, it's much more refined and given than older macOS's.
      I wanted the 8th generation because of the 4 cores which is almost 1.5 times faster than this 7th generation i7-7500u, but the price is too high. I picked up this one on Craigslist for $400. I've just ordered the 500GB NVME WD Black for $104 and DW1560 for $29. So, the perfect MacBook Pro 14,2 is less than $600 that last 5-6 hours with Mojave and 8-9 hours on Windows 10. The bench mark is the same as the real MacBookPro 14,2. BTW, this is the first try, there will be on going testing and confirming. 250GB hard drive is hardly enough for dual boot Windows and Mac. You need at least 500GB, I don't use Windows at all, so I'll partition 200GB for Windows and 300GB for Mojave.
      All new HP laptops will have kernel panic if using Clover to boot UEFI, at least a fix was found. I'll have more videos and info when I have time to write them. Watch the videos and ask questions if you have any problems.
      1. Clover 4558 - Lilu.kext (1.3.3) - AppleALC.kext (1.3.1) - Whatevergreen.kext (1.2.3) - USBInjectAll.kext (0.6.5) - Fakesmc.kext (6.25-332-gf3a8525c.1758) - ACPIBatteryManager.kext (1.81.4) - AHCIPortInjector.kext - BrcmFirmwareRepo.kext (2.2.7) - BrcmPatchRAM2.kext (2.2.7) - CodecCommander.kext (2.6.2) - FakePCIID_Broadcom_WiFi.kext (1.3.9) - FakePCIID_Intel_HD_Graphics.kext (1.3.9) - FakePCIID.kext (1.3.9) - SSDT-AUIC-ALL.aml - SSDT-USBX.aml - SSDT-PNLF.aml - SSDT-PluginType1.aml - PreLoader.efi.
      2. For the keys F2 & F3 to work with backlight slider - the Fakesmc.kext version is important for some reasons, I'm still trying to find out why.
      The touchscreen actually works without the voodooI2C kexts, just need to patch the clover.
       
      I've been playing with the laptop for over a week now. Ordered the WD 500GB WDS500G2X0C from Amazon for $104, the 256GB is too small for dual booting Windows 10 & Mojave. It's really plug and play.
       
      Hardware - needed to make this a perfect macbook Pro14,2.
      1. DW1560 BCM94352Z - make sure it has 2 notches - Tape the 2 right pins on the 4 pins tab for it to work without a hitch on both Windows 10 and Mojave. You can buy from Ebay cheaper but you have to wait for months.
      2. 500GB NVMe SSD m.2 connector M is a must for dual boot - the cheaper one will be slower - Crucial NVMe 500GB is $25 less than WD.
      3. NOVOO USB-C to HDMI hub that works and inexpensive.
       
      Let's start to get this Kaby Lake working on the HP - I believe HP has the same components for similar configuration on different models. In order to get Mojave to work on Intel Laptop, we need a few important components - Sound is important (look for Realtek - ALC295) - Ethernet if any -Realtek - Trackpad  and TouchScreen (Synaptics or Elan).
       
      REPLACE VNMe SSD HARD DRIVE and DW1560 BCM94352Z
       
      The current BIOS is F22, the newest one is F27 but I don't want to update since it's working well. Since I don't really need the original Windows 10 with Junk software in it, I install the latest Windows 10 using Media Creation USB Boot Drive. The important thing is we have to prepare the SSD correctly or our EFI folder will only be set at 100MB which is not enough to install Clover or any other boot loaders. So instead of letting the Windows installer to create the EFI folder automatically, we can set the size ourselves using "diskpart" command. In order to use diskpart, we need to boot with Windows 10 USB installer (hit F9 then select UEFI USB installer) - select system repair and not installation - then select command prompt, from here we can create EFI folder and MSR for Windows installer to install. The product ID is already in the UEFI bios, so we don't really have to manually activate the Windows 10.

       
       
      diskpart
      select disk 0
      clean
      convert gpt
      create partition efi=300 !!! you can change it from 300MB to any size.
      format quick fs=fat32 label="EFI"
      create partition msr size=16
      exit

      After exit, reboot with the USB installer again in UEFI mode, select the custom. The Windows installer will select the 300MB EFI folder we've just created.
       
       
      How to fix KP on Clover UEFI Boot.
       
       
      This is the macBook Pro 14,2 from HP 13-ad010nr
       
       
       
      Louis
       
    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By yehia2amer
      Dell Precision T7610 Workstation
      Hackintosh GUIDE (Work in Progress)
       
                        
      Introduction: 
      Hi Everyone,
      This Workstation used to be a Beast with Dual CPUs and tons of RAM, I Know it is now normal to get that much cores in a Desktop but it is still a very decent machine for me (As a Programmer), and I thought it would be a good idea to Install MacOS as the Daily Driver Rather than Linux and It turns out to be a very Great Experience (with Some Challenges ).
       
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors RAM: 128 GB 1333 MHz DDR3 ECC Memory GPU: SAPPHIRE PULSE Radeon RX 580 8GD5 Chipset: Intel C602 Audio: Realtek ALC3220 (ALC280) High Definition Audio SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      Working:
      Both "Xeon E5-2680 v2" and all cores with Power Management and P-States (using VoodooTSCSync & ssdtPRGen.sh) ATI Radeon HD 4870 (Vanilla) Realtek ALC3220 (ALC280)  (using VoodooHDA till Now - it is partially working with AppleALC using layout-id 13) LSI 2308 SAS (using AstekFusion2) Intel 82579 Network Controller (Vanilla) Intel I210 Network Controller (IntelMausiEthernet) USB 2.0  
      Not Working:
      NEC USB3.0 xHCI Controller (Renesas Electronics uPD720201 & uPD720202) Sleep  
      https://github.com/yehia2amer/Dell-Precision-T7610-Workstation-Hackintosh-Guide
×