Jump to content
  1. macinsane

    macinsane

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By pilo2300
      Hi, I'm receiving these two errors before the system automatically reboots.
      36:296 00:063 OCSMC: SmcReadValue Key 4D535463 Size 1 36:351 00:054 OCSMC: SmcReadValue Key 4D534163 Size 2  
      Using OpenCore 0.5.7, Mojave 10.14.6 installed successfully (from USB, but have not gone through OS setup ie. 'select your country' screen yet) but now selecting the Mojave drive in the boot picker results in the above error.
      Hardware is Gigabyte H77-DS3H, Core i7 3770 (Ivy Bridge), Radeon Sapphire RX 580 Pulse, 16GB DDR3 ram.
       
      I had a fully working 10.14.4 install running OC 0.5.6 prior to this.

      OpenCore log and config.plist (with SMBIOS serials etc removed) attached - any help greatly appreciated.
       
      Thank you.
      opencore-2020-04-08-000853.txt
      config.plist
    • By anokic
      I have been using clover to install and configuration my Hackintosh High Sierra 10.13.6. It's been a struggle and a pain. Can't restart/shutdown/wake from sleep. Random freezes. When freeze happens mouse works but in loading state. UI and open apps freeze not the mouse. I can make the apps smaller and move them.

      I haven't used any DSDT nor SSDT. Tried 5 or 6 of them from others but sometimes i end up not booting. Could someone explain me do i even need them and why? Do i need DSDT or SSDT or both?

      I'm going to try to install everything OpenCore. The first thing is i can't use a method that needs an internet while installing MacOS cause my ethernet/internet only works when i install MacOS. So i can't use the images i need full installation. Okay i have the full installation for 10.13.6. I need to use a version 10.13.4-6 versions cause application Sketch needs the newer one High Sierra 10.13.4++ version.

      Can you tell me? Can i use same kexts from Clover on OpenCore? Secondly how can i install full USB MacOS installer? (High Sierra 10.13.6 version i have is 7gb i think thats it)
      Is there a version of AMDHigh Sierra version made from the community for 10.13.4++ version?
      If i use the normal 10.13.6 High Sierra should i use this AMD 10.13.6 Kernel when i have installed the MacOS or some other kernel that's better for my system? https://github.com/Shaneee/AMD-High-Sierra-XNU/releases
      Whats the best version of High Sierra to use for Ryzen and Nvidia system?

      Will it be better to use OpenCore?

      Specs:
      Mortar Max B450M
      Ryzen 2600x
      Nvidia GTX 1060
      16gb DDR4 2400mhz
    • By cixque
      CLOVER.zipCLOVER.zipDell Venue 11 Pro 7140
      ------------
      Specification
       
       
      Intel Core M 5Y71
       
      Intel HD Graphics 5300
       
      Intel Broadwell-U motherboard
       
      8GB Ram
       
      256GB SSD
       
      Dell DW1850e WWAN + GNSS GPS
       
      Intel Wireless 7265 + Intel Bluetooth
       
      NFC
       
       
      …..
       
       
       
       
       
      Mojave 10.14.6
       
      What works
      Native Power Manager (Generate Plugin type) Full Graphics with QE/CL Brightness (Add PNLF in Config.plist or DSDT Patch) — (Brightness slide bar) Touch Screen, and Pen (DSDT Patch + Voodoo I2C, I2CHID satellite KEXT) HDMI output with hot plug (Lilu + WhateverGreen) HDMI Audio with hot plug (Lilu + AppleALC) no Layout-id needed Front and Rear Cameras MicroSD slot - O2 Micro (I use Adding Arbitrary under Devices in Config file Method) Ref, Post #6 by Jake Jo https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/ Battery Indicator (ACPIbattery by Rehabman) ——>To utilise both battery, SSDT (by Rehabman) is needed in order to combine 2 batteries as one.
      Travel Keyboard Dell K12a001 (USBinjectall KEXT) Native Keyboard keys (Brightness, volume keys) WWAN card Dell DW1850e (OOB) Bluetooth -------------------
       
      What doesn’t work
       
       
      Sleep Wake — I have no idea how to fix it as it is required DSDT patch I guess. GPS NFC Audio ---> Realtek I2S Audio (PG0.35 for DELL)
       
      In DSDT entries is HDAUDIO\\FUNC_01&VEN_10EC&DEV_0282&SUBSYS_00000000&REV_1000\ Which indicates ALC282
       
      Audio ALC3263 (As it shown in BIOS) - Broadwell rt286 - Card1/Codec#0 (Utilised in I2S Mode) there is nowhere in BIOS to change to HDA mode). Drop OEM HDA and Fix HDA don’t do anything, still show 3 HDMI Audio outputs. If there is a DSDT patch to force HDA Audio mode, Please do enlighten me.
      As a result Internal Speaker, Internal Mic, and Headphone Jack doesn’t work.
       
      Touchpad on Travel Keyboard Dell K12a001 (Should work with DSDT Patch with pin configuration) I have no idea how. Obviously, Intel Wireless 7265 AC. For experimental purpose. https://github.com/daliansky/XiaoMi-Pro-Hackintosh/issues/330 — Knock yourself out. I managed to get it work for awhile but the real problem is kernel panic so I gave up. Ordering compatible card instead. ------------------
       
      Config.plist got it from Rehabman laptop config.
       
       
      BIOS version A20
       
      Enable:
       
      - Legacy Boot Rom
       
      Disable:
       
      - Secure Boot
       
      - TPM 2.0
       
      - Vt-d
       
      ------------
       
      SMBIOS - I use MacBook8,1. —- MacBookAir7,1-7,2 (Min Freq is at 1.2 GHz) MacBookPro12,1 Min Freq is at 800 Mhz and it is the default this cpu should be. Again, there is a way to set it right somewhere in this forum.
       
      ------------
       
      -->> DSDT Windows 8 patch
       
      System sees only one I2C Controller which control Touch Screen.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      -->> DSDT Windows 8.1 Patch
       
      System sees two I2C Controllers which control Touch Screen and Accelerometer.
      Touch Screen registers as Magic Trackpad 2.
      Pen as Mouse
       
      OOO>>> With Windows 8.1 patch which it should run with this one because it can see more of HID devices and controllers.
       
      Problem is Accelerometer (SHUB).
      Device can automatically rotate screen as it should be BUT it flips the screen wildly even with slightly movement. It stops only when device stays completely still. Eventually it breaks internal screen graphic. It becomes grabble. I restored internal screen graphic by connecting it to external monitor and set rotation of external screen to 0 degree. Then it is back to normal. (I guess it conflict with rotation setting) I disable SHUB in DSDT.
       
      ---------------------
       
      During Installation process Full Graphic acceleration can be activated straight away by Lilu and Whatevergreen. AppStore, iMessage and, FaceTime activate by NullEthernet and SSDT by Rehabman USBInjectAll needed for keyboard and other usb peripherals. Use other tool to keep certain ports active as Rehabman mention this KEXT is not good for a long run. Please do Correct me if I did something worng. Or any suggestions to make this thing runs better.
      CLOVER.zip
      IOReg_SysReport.zip
    • By dasca.thea
      Hi everyone,

      I have run into a frustrating problem here.

      My hardware:
      MSI x399 Meg Creation
      2990WX
      64GB ram @2933Mhz
      Radeon 7
      Sata: Samsung 130GB SSD
      M.2: Samsung 970 Pro 1TB(latest firmware)

      Using OpenCore 0.5.6
      (NVMeFix NVMeDxe installed)
      I have successful installed OSX catalina onto my 130GB. It works flawlessly.

      and then I figure I should do it on my M.2 drive. It installs flawlessly, at the last stage of installation, it naturally restart and thats it.
      I can not boot into this newly installed OS on the M.2 drive. it keeps throwing: "error loading kernel cache 0x1"

      I have tried deleting the prelinkedkernel from recovery partition. Tried rebuilding cache(I have not installed any kext into L/E).

      All this time, I can use the same boot USB to boot into catalina on my sata 130Gb SSD working just fine.
       
      attached is my EFI folder. I have tried all the suggested SMBios iMacPro1,1 MacPro6,1 MacPro7,1
       
      is this ruled out that samsung 970Pro doesnt work?
      Please help. 
       
       
      EFI.zip
×